Flow Activated Switches

Section Code 1719 :

Back To Directory Sections

#2012076

Range of flow switches with brass bodies incorporating EPDM ‘O’-rings, acting as a leak detection system that actuates an integral spherical valve to shut off the water supply. The inlet incorporates a stainless steel strainer. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 30°C.

Section:
1719 Flow Activated Switches
WRAS Approval Number:
2012076
Expiry date:
31/12/2025
Note:
Cannot be used as the main stop valve into a premises. The fitting listed on this approval has been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed.
Size:
¾”, 1” & 1¼” BSP (M) inlet/outlet.
Marking:
‘SYR’ (Hans Sasserath GmbH & Co. KG logo) and SAFETECH on plastic cover.
Installation Requirements:
R001
Model:
SafeTech Connect 2422
Manufacturer:
Hans Sasserath GmbH
Company Name
Hans Sasserath GmbH
Address
Mühlenstrasse 62, D-41352 Korschenbroich
Country
Germany
Phone
+49 (0) 2161 - 6105 10

View All Listings by this Company

Print This Approval


#2012087

Range of flow switches with brass bodies incorporating EPDM ‘O’-rings, acting as a leak detection system that actuates an integral spherical valve to shut off the water supply. The inlet incorporates a stainless steel strainer. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 30°C.

Section:
1719 Flow Activated Switches
WRAS Approval Number:
2012087
Expiry date:
31/12/2025
Note:
Cannot be used as the main stop valve into a premises. The fitting listed on this approval has been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed.
Size:
¾”, 1” & 1¼” BSP (M) inlet/outlet.
Marking:
RELIANCE VALVES ON PLASTIC COVER
Installation Requirements:
R001
Model:
LEKP100001 - ¾, LEKP100002 1” & LEKP100003 1¼ FLOW ACTIVATED SWITCHES

Print This Approval


#2112030

Turbine flow sensors with a plastic bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C

Section:
1719 Flow Activated Switches
WRAS Approval Number:
2112030
Expiry date:
31/12/2026
Size:
OD 30mm
Marking:
MARQUARDT logo, customer number, model number and date of manufacture (XXYYMMDD) on adhesive label attached to wiring. Flow arrow on body
Installation Requirements:
R001
Model:
2061.3101. Model added August 2023: 2061.3102.
Factor:
Marquardt GmbH
Company Name
Marquardt GmbH
Address
Schloss-Strasse 16, 78604 Rietheim-Weilheim Germany

View All Listings by this Company

Print This Approval


#2205324

Range of flow switches with plastic bodies, models (SSCG-1-S70 & SSCG-1-S101) , incorporate EPDM ‘O’-rings. Maximum working pressure 12.0 bar. Maximum operating temperature 85°C.

Section:
1719 Flow Activated Switches
WRAS Approval Number:
2205324
Expiry date:
31/05/2027
Size:
see model
Marking:
Huadi logo, flow arrow on body
Installation Requirements:
R001
Model:
SCG-1W-S18 (19.99mm ID x 21.17mm ID) SSCG-1-S70 (20.07 mm ID x 20.07 mm ID) SSCG-1-S101 (20.07 mm ID x19.05 mm ID
Manufacturer:
Zhejiang Huadi Electronics Co., Ltd.
Company Name
Zhejiang Huadi Electronics Co., Ltd.
Address
No. 169 Wei 16 Road, Yueqing Economic Development Zone, Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval


#2207348

Stainless steel bodied flow switch, with integral plastic plunger. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:
1719 Flow Activated Switches
WRAS Approval Number:
2207348
Expiry date:
31/07/2027
Size:
⅜” BSP (M).
Marking:
iMist FS-10-100 and flow arrow on body.
Installation Requirements:
R001
Model:
iMist Flow switch FS-10-100.
Factor:
iMist Holdings Ltd.
Company Name
iMist Holdings Ltd.
Address
Unit 293, National Avenue Hull
Postcode
HU5 4JB

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.