Water Meter Manifolds

Section Code 1510 :

Back To Directory Sections

#2001054

Water meter manifold with gunmetal body, brass connections, EPDM seal and NBR ‘O’-rings. The product incorporates a non-return valve after the meter location and a servicing valve on the inlet. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2001054
Expiry date:
31/01/2025
Size:
1” BSP (F) x 1” BSP (F)
Marking:
Waterfit and Waterfit logo on body.
Installation Requirements:
R001
Model:
MK9000003993 2" Gunmetal Meterfit Boundary Box
Manufacturer:
Waterfit Ltd
Company Name
Waterfit Ltd
Address
PO Box 28 293 Birmingham New Road Dudley
Postcode
DY1 4SJ
Country
West Midlands
Phone
0121 5207987

View All Listings by this Company

Print This Approval


#2001058

Range of water meter manifolds with plastic bodies incorporating a drain off valve. Inlets incorporate a plastic strainer. Products also incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Cold water use only. Maximum working pressure 16.0 bar.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2001058
Expiry date:
31/01/2025
Note:
For above ground use only
Size:
15mm, 22mm compression (CU), 25mm spigot (PF) inlets to 15mm or 22mm compression (CU) outlets depending on model
Marking:
Talis logo and flow arrow on body
Installation Requirements:
R001
Model:
MA3261515AM Internal Meter Manifold 15 CU Inlet / Outlet MA3261522AM Internal Meter Manifold 15 CU Inlet / 22CU Outlet MA3262215AM Internal Meter Manifold 22 CU Inlet / 15CU Outlet MA3262222AM Internal Meter Manifold 22 CU Inlet / Outlet MA3262515AM Internal Meter Manifold 25 PF Inlet / 15CU Outlet MA3262522AM Internal Meter Manifold 25 PF Inlet / 22CU Outlet
Manufacturer:
Atlantic Plastics Ltd
Company Name
Atlantic Plastics Ltd
Address
Edison Road Hams Hall Distribution Park Coleshill
Postcode
B46 1AB
Country
Birmingham
Phone
01675 437 900

View All Listings by this Company

Print This Approval


#2102804

Range of water meter manifolds with plastic bodies. The inlets incorporate a spherical valve and a non-return valve (not suitable for back flow protection). Model MD1010101BM is for use with Irish Heavy gauge pipe manufactured to 15134/1977. All other models are for use with blue MDPE pipe manufactured to EN12201. Maximum working pressure 12.5 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2102804
Expiry date:
28/02/2026
Size:
see model
Marking:
Ebco and flow arrow on body.
Installation Requirements:
R001 R008
Model:
MB1012525BM: 25mm pushfit. MB1010202BM: 20mm pushfit. MB1010101BM: ½” Irish pushfit. MB1020303BM: ¾” BSP (F).
Manufacturer:
Atlantic Plastics Ltd
Company Name
Atlantic Plastics Ltd
Address
Edison Road Hams Hall Distribution Park Coleshill
Postcode
B46 1AB
Country
Birmingham
Phone
01675 437 900

View All Listings by this Company

Print This Approval


#2101327

Range of water meter manifolds with a plastic body and a spherical valve at the inlet. Models MB2012525DM & MB2010303DM incorporates two single check valve cartridges, all other models incorporate one single check valve however, the complete product has not been fully tested to demonstrate it provides backflow protection Model MB201010BM is for use with Irish Heavy gauge pipe manufactured to 15134/1977. All other models are for use with blue MDPE pipe manufactured to EN12201. Maximum working pressure 12.5 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2101327
Expiry date:
31/01/2026
Size:
see mdoel
Marking:
Ebco and flow arrow on body
Installation Requirements:
R001 R008
Model:
MB2012525BM: 25mm pushfit. MB2012020BM: 20mm pushfit. MB2010101BM: ½” HG Irish compression. MB2010303BM: ¾” BSP (F). MB2011010BM: 25mm compression. MB2012525DM: 25mm pushfit. MB2010303DM: ¾” BSP (F).
Manufacturer:
Atlantic Plastics Ltd
Company Name
Atlantic Plastics Ltd
Address
Edison Road Hams Hall Distribution Park Coleshill
Postcode
B46 1AB
Country
Birmingham
Phone
01675 437 900

View All Listings by this Company

Print This Approval


#2106022

Range of water meter manifolds incorporating DZR brass bodies, PTFE washers, a non-return valve and ball valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2106022
Expiry date:
30/06/2026
Size:
¾” BSP (F) inlet and outlet
Marking:
MWM, CR & flow arrow on body.
Installation Requirements:
R001
Model:
WBBADAPT112-BV
Factor:
MWM Distributors Ltd
Company Name
MWM Distributors Ltd
Address
Units 52 & 53 Enfield Industrial Estate Windsor Road
Postcode
B97 6DE
Country
Redditch
Phone
+44 (0) 1527 68200
General Email
sales@mwmdistributorltd.com

View All Listings by this Company

Print This Approval


#2110358

Range of water meter assemblies which incorporating DZR brass bodies, spherical valve and pressure reducing valve (1.5 to 6.0 bar range). The products incorporate two approved, in-line single check valve cartridges, (verified by test, suitable for backflow protection against Fluid Category 3). Fitting is also supplied with a pressure guage. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2110358
Expiry date:
31/10/2026
Size:
¾” with straight connector or meter connection. 1” with straight connector or meter connection.
Marking:
Essco Controls, CR, flow arrow and size on body.
Installation Requirements:
R001
Model:
ESS-90501035 PRV-CON. ESS-90501101 PRV-CON. ESS-90501035 CARRIER PRV-CON. ESS-90501101 CARRIER PRV-CON.
Factor:
Essco Controls Ltd
Company Name
Essco Controls Ltd
Address
Unit 5, Nelson Ind Park Herald Road Hedge End
Postcode
SO30 2JH
Country
Southampton

View All Listings by this Company

Print This Approval


#2111325

Range of water meter manifolds (also known as double box valves) for use with MDPE pipe (manufactured to BS EN 12201). The products incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 16 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2111325
Expiry date:
30/11/2026
Size:
25mm & 32mm push-fit
Marking:
Talis, Talis logo & flow arrow on body.
Installation Requirements:
R001
Model:
‘Talbot Double Box Valves’: MB57425U Matrix Double Box Inlet 2 x 25mm PF, Outlet 2 x 25mm PF. MB5743225U Matrix Double Box Inlet x 32mm PF Tee, Outlet 2 x 25mm PF. MB5743232U Matrix Double Box inlet 1 x 32mm PF Tee, Outlet 2 x 32mm PF. MB57432U matrix Double Box Inlet 2 x 32mm PF, Outlet 2 x 32mm PF.
Manufacturer:
Atlantic Plastics Ltd
Company Name
Atlantic Plastics Ltd
Address
Edison Road Hams Hall Distribution Park Coleshill
Postcode
B46 1AB
Country
Birmingham
Phone
01675 437 900

View All Listings by this Company

Print This Approval


#2112037

Range of ‘Resident Valves’ with a DZR brass body consisting of water meter manifold, an isolation valve on the inlet, a pressure reducing valve (adjustable between 1.5 and 6.0 bar) and 2 non-return valves which are located on the outlet of the water meter manifold. The ‘Plus’ models are also supplied with an isolation valve on the outlet, which incorporates a drain tap. Maximum supply pressure 16.0 Bar. Cold water above ground use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2112037
Expiry date:
31/12/2026
Size:
See model.
Marking:
Main body: Pegler (Pegler is a brand of Aalberts integrated piping systems Ltd.), Pegler logo, flow arrow, size, pressure and CR on body. Isolation valve: Pegler and Pegler logo, CR and PN on body.
Installation Requirements:
R001 R120 R511
Model:
Pegler RES1 Resident Valve 3/4x1 MF (5A3001): ¾” BSP (F) inlet x 1” BSP (M) outlet. Pegler RES1 Resident Valve 1X1 MF (5A3002): 1” BSP (F) inlet x 1” BSP (M) outlet. Pegler RES2 Resident Valve Plus 3/4 FF (5A3021): ¾” BSP (F) inlet/outlet. Pegler RES2 Resident Valve Plus 1 FF (5A3022): 1” BSP (F) inlet/outlet.
Factor:
Aalberts IPS Ltd.
Company Name
Aalberts IPS Ltd.
Address
St. Catherines Avenue Doncaster
Postcode
DN4 8DF

View All Listings by this Company

Print This Approval


#2201344

Range of water meter manifolds (plastic body). Model WB31520CG incorporates a single check valve cartridge and model WB31520CGDCV two single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2201344
Expiry date:
31/01/2027
Size:
¾” BSP (F)
Marking:
Talis on base. Flow arrow on manifold box.
Installation Requirements:
R001 R008
Model:
Talbot Matrix: WB31520CG WB31520CGDCV
Manufacturer:
Atlantic Plastics Ltd
Company Name
Atlantic Plastics Ltd
Address
Edison Road Hams Hall Distribution Park Coleshill
Postcode
B46 1AB
Country
Birmingham
Phone
01675 437 900

View All Listings by this Company

Print This Approval


#2203314

Range of water meter manifolds with gun metal bodies and ball valve with either a quarter turn stop valve or screw down stop valve. The products incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2203314
Expiry date:
31/03/2027
Note:
R008 applies to te plastic cap
Size:
see model
Marking:
Ebco logo, flow arrow, Foundry I.D. (QL) & date of manufacturer (MM/YY) on body.
Installation Requirements:
R001 R008
Model:
1" BSP (M) x ¾” BSP (F) models: MB1030403BM MB1030403EM MANI0461V MANI0461VW MANI0461VMCP20 MVB0250MCP40 MVB0240 MVB0241 MVB0250 MVB0255 ¾ BSP (F) x ¾” BSP (F) models: MBB0460V MBB0470V MBB0461V MBB0481V MBB0040V MBB0060V MVB0210 MVB0200 MVB0220 ¾” BSP (M) x ¾” BSP (M) models: MVB0020 MVB0030 MVB0040 MVB0045 1" BSP (M) x 1” BSP (M) MVB0230
Manufacturer:
Atlantic Plastics Ltd
Company Name
Atlantic Plastics Ltd
Address
Edison Road Hams Hall Distribution Park Coleshill
Postcode
B46 1AB
Country
Birmingham
Phone
01675 437 900

View All Listings by this Company

Print This Approval


#2206340

Range of 4 or 6 port manifolds with or without water meter manifolds (see model), all with gunmetal bodies. Models with a water meter manifold incorporate a quarter turn stop valve or screw down stop valve (see model), and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2206340
Expiry date:
30/06/2027
Size:
1 ½” BSP (F) inlet connection.
Marking:
Ebco (brand of Talis UK) and date of manufacture (MM/YY) on body.
Installation Requirements:
R001 R008 R120
Model:
4 Port manifold: MANI4. 4 Port manifold with meter manifold connection tails (only): MANI43, MANI44. 4 Port manifold, connection tails and water meter manifold with screw down stop valve: MANI401, MANI402, MANI403, MANI410, MANI411, MANI420. 4 Port manifold, connection tails and water meter manifold with quarter turn stop valve: MANI451, MANI452. 6 Port manifold: MANI6. 6 Port manifold with meter manifold connection tails (only): MANI63, MANI64. 6 Port manifold, connection tails and water meter manifold with screw down stop valve: MANI601, MANI602, MANI603, MANI610, MANI611. 6 Port manifold, connection tails and water meter manifold with quarter turn stop valve: MANI651.
Manufacturer:
Atlantic Plastics Ltd
Company Name
Atlantic Plastics Ltd
Address
Edison Road Hams Hall Distribution Park Coleshill
Postcode
B46 1AB
Country
Birmingham
Phone
01675 437 900

View All Listings by this Company

Print This Approval


#2212015

Water meter manifold with a plastic body and EPDM O rings. The outlet incorporates a non-return valve, not suitable for backflow protection. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2212015
Expiry date:
31/12/2027
Size:
1” BSP (M) inlet and outlet
Marking:
Arad, model number, connection & DN size, PN 10 and technical information on body.
Installation Requirements:
R001 R120
Model:
FAM-UFR ¾’’ BSP.
Factor:
WINT WI LTD
Company Name
WINT WI LTD
Address
8 Amal St., Rosh Ha’ain, Israel, 4809229

View All Listings by this Company
Manufacturer:
Arad Ltd
Company Name
Arad Ltd
Address
1923900 Kibutz Dalia
Postcode
Israel

View All Listings by this Company

Print This Approval


#2303354

Water meter housing with DZR brass body, NBR ‘O’-rings and incorporates a spherical valve. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 80°C

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2303354
Expiry date:
31/03/2028
Size:
¾” BSP (F)
Marking:
Eagle (SCE Technology logo), flow arrow and CR on body
Installation Requirements:
R001
Model:
4414-WMHV
Factor:
SCE Technology (Ningbo) Co.,Ltd.
Company Name
SCE Technology (Ningbo) Co.,Ltd.
Address
No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2303371

Water meter manifold with a DZR brass body, NBR ‘O’-rings and incorporates a spherical valve. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 80°C

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2303371
Expiry date:
31/03/2028
Size:
¾” BSP (F)
Marking:
MWM, flow arrow and CR on body
Installation Requirements:
R001
Model:
WBBADAPT-3
Factor:
MWM Distributors Ltd
Company Name
MWM Distributors Ltd
Address
Units 52 & 53 Enfield Industrial Estate Windsor Road
Postcode
B97 6DE
Country
Redditch
Phone
+44 (0) 1527 68200
General Email
sales@mwmdistributorltd.com

View All Listings by this Company

Print This Approval


#2303346

Range of single or manifold below ground meter boxes. The boxes incorporate a concentric water meter manifold and a servicing valve on each connection. CV models incorporate an approved single check valve cartridge and the DCV model incorporates two approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The pushfit inlet and outlet connections are supplied with pipe inserts and are for use with MDPE pipe (manufactured to EN 12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2303346
Expiry date:
31/03/2028
Size:
20mm, 25mm, 32mm.
Marking:
Talis, Talbot (brand of Atlantic Plastics Ltd), batch clock and recycle code on body.
Installation Requirements:
R001
Model:
Matrix Manifold (CV) with PF inlet and outlet, Matrix Manifold (DCV) with PF inlet and outlet, Matrix Manifold (CV) 4 inlets x 4 outlets 25mm, Matrix Manifold (CV) 6 inlets x 6 outlets 25mm.
Manufacturer:
Atlantic Plastics Ltd
Company Name
Atlantic Plastics Ltd
Address
Brackla Industrial Estate Bridgend
Postcode
CF31 2AX
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2304325

Talbot Modular Manifold System with and without concentric water meter connections with plastic bodies incorporating screw down stopvalves. Maximum working pressure 16 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2304325
Expiry date:
30/04/2028
Size:
see model
Marking:
Talbot (brand of Atlantic Plastics Ltd.) on manifold body.
Installation Requirements:
R001 R120
Model:
2 port to 12 port with 2” BSP; 50mm & 63mm PE inlet and concentric connection x 25mm PE outlet E3707, MANIF 2 PF 50 X 25MM E3708, MANIF 3 PF 50 X 25MM E3709, MANIF 4 PF 50 X 25MM E3710, MANIF 5 PF 50 X 25MM E3711, MANIF 6 PF 50 X 25MM E3712, MANIF 7 PF 50 X 25MM E3713, MANIF 8 PF 50 X 25MM E3714 MANIF 9 PF 50 X 25MM E3715, MANIF 10 PF 50 X 25MM E3716, MANIF 11 PF 50 X 25MM E3717 MANIF 12 PF 50 X 25MM E3718, MANIF 2 PF 63 X 25MM E3719, MANIF 3 PF 63 X 25MM E3720, MANIF 4 PF 63 X 25MM E3721 MANIF 5 PF 63 X 25MM E3722, MANIF 6 PF 63 X 25MM E3723, MANIF 7 PF 63 X 25MM E3724, MANIF 8 PF 63 X 25MM E3725 MANIF 9 PF 63 X 25MM E3726, MANIF 10 PF 63 X 25MM E3727, MANIF 11 PF 63 X 25MM E3728 MANIF 12 PF 63 X 25MM Talbot Modular Manifold System 2 port to 12 port with 2” BSP; 50mm & 63mm PE inlet x ¾” BSP; 25mm outlets E3751 MANIF 2 PF 50 X 25MM E3752 MANIF 3 PF 50 X 25MM E3753 MANIF 4 PF 50 X 25MM E3754 MANIF 5 PF 50 X 25MM E3755 MANIF 6 PF 50 X 25MM E3756 MANIF 7 PF 50 X 25MM E3757 MANIF 8 PF 50 X 25MM E3758 MANIF 9 PF 50 X 25MM E3759 MANIF 10 PF 50 X 25MM E3760 MANIF 11 PF 50 X 25MM E3761 MANIF 12 PF 50 X 25MM E3762 MANIF 2 PF 63 X 25MM E3763 MANIF 3 PF 63 X 25MM E3764 MANIF 4 PF 63 X 25MM E3765 MANIF 5 PF 63 X 25MM E3766 MANIF 6 PF 63 X 25MM E3767 MANIF 7 PF 63 X 25MM E3768 MANIF 8 PF 63 X 25MM E3769 MANIF 9 PF 63 X 25MM E3770 MANIF 10 PF 63 X 25MM E3771 MANIF 11 PF 63 X 25MM E3772 MANIF 12 PF 63 X 25MM
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Brackla Industrial Estate, Coity, Bridgend
Postcode
CF31 2AX

View All Listings by this Company

Print This Approval


#2309051

Range of water meter chambers with plastic or DZR brass body manifold assemblies. The inlet incorporates a screw down isolation valve or quarter turn isolation valve (DZR brass model) & the chamber incorporates non-return valves (not suitable for back flow protection). Maximum working pressure 12.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2309051
Expiry date:
30/09/2028
Size:
Please refer to model.
Marking:
GPS logo, part number, flow arrow, pressure and date of manufacture (DD/MM/YYYY) on adhesive label on body
Installation Requirements:
R001 R008
Model:
T25T25T – 25mm PE pushfit inlet X outlet P20P20P – 25mm PE pushfit inlet X outlet P25P25P – 20mm PE pushfit inlet X outlet HP25T25 – 25mm PE pushfit inlet X outlet HT25P25 – 25mm PE pushfit inlet X outlet HP20T25 – 20mm PE pushfit inlet X 25mm PE pushfit outlet HT25P20 – 25mm PE pushfit inlet X 20mm PE pushfit outlet C34M34M - 3/4" BSP (F) inlet X outlet
Factor:
Aliaxis UK
Company Name
Aliaxis UK
Address
Dickley Lane, Lenham, Kent
Postcode
ME17 2DE

View All Listings by this Company

Print This Approval


#2310314

Pentobox range of water meter manifolds with plastic bodies and an integral spherical valve on the inlet. The models incorporate a non-return valve, (not suitable for backflow protection). Compression models are for use with metric and imperial PE80 pipe (manufactured to BS EN 12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2310314
Expiry date:
31/10/2028
Size:
Please refer to model.
Marking:
AVK logo and date stamp on cover. Flow arrow on meter box body. Date stamp and size on manifold. (Date stamps = two clocks, one for month, the other for year).
Installation Requirements:
R001 R008
Model:
8054125521110301000: 25mm compression. 8054132521110301000: 32mm compression. 8054121521110301000: ½" compression. 8054326521110301000: ¾" BSP (F). 8054125521110331000: 25mm compression. 8054132521110331000: 32mm compression. 8054121521110331000: ½" compression. 8054326521110331000: ¾" BSP (F).
Factor:
AVK UK Ltd.
Company Name
AVK UK Ltd.
Address
8 Rushmills, Northampton, Northants.
Country
NN4 7YB

View All Listings by this Company

Print This Approval


#2311061

Range of water meter manifolds with brass or DZR brass bodies. The outlets incorporate non-return valves (not suitable for backflow protection). For use with copper pipe manufactured to BS EN 1057 (WBBADAPT112). Maximum working pressure 10.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2311061
Expiry date:
30/11/2028
Note:
Products supplied with blanking cap and O-ring for transportation. R009 applies to plastic cap
Size:
See model.
Marking:
MWM and flow arrow on body - WBBADAPT112. MWM, CR and flow arrow on body - WBBADAPT112-F.
Installation Requirements:
R001 R009
Model:
WBBADAPT112 - 15mm compression brass, WBBADAPT112-F - ¾” BSP (F) DZR.
Factor:
MWM Distributors Ltd
Company Name
MWM Distributors Ltd
Address
Units 52 & 53 Enfield Industrial Estate Windsor Road
Postcode
B97 6DE
Country
Redditch
Phone
+44 (0) 1527 68200
General Email
sales@mwmdistributorltd.com

View All Listings by this Company

Print This Approval


#2310108

Range of (below ground) water meter manifolds (gunmetal bodies), meter carriers (DZR brass bodies) and stopcock carriers (gunmetal bodies). All meter carriers incorporate a non-return valve. All manifold ports and the stopcock carriers incorporate a non-rising spindle stopcock with a T shaped operating member. Maximum working pressure: 16.0°C Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2310108
Expiry date:
31/10/2028
Size:
1/2" BSP (M) x 1.1/2" BSP (M) union adaptor, 1.1/2" BSP (F) manifold & ¾” BSP (F) carriers.
Marking:
Waterfit, WF logo & size on union nut. WF and flow arrow on meter carrier and stopcock carrier. CR Mark on DZR caps.
Installation Requirements:
R001 R008
Model:
MAI275002587 (2 Port Manifold) MAl375002588 (3 Port Manifold) MAl475000380 (4 Port Manifold) MAl575000381 (5 Port Manifold) MAI675000382 (6 Port Manifold) MAl775000383 (7 Port Manifold) MAl875000384 (8 Port Manifold) MAl975000959 (9 Port Manifold) MAI075002185 (10 Port Manifold) MAI175002186 (11 Port Manifold) MAI275002542 (12 Port Manifold) MAI375002543 (13 Port Manifold) MAl475002510 (14 Port Manifold) MAI375004576 (12+1 Port Manifold) MAl475004577 (12+2 Port Manifold) MAI775004574 (6+1 Port Manifold) MAl875004575 (6+2 Port Manifold) MAl475004585 (13+1 Port Manifold) CAI075000031 (Meter carrier) CAI075000040 (Stopcock carrier)
Factor:
Waterfit Ltd
Company Name
Waterfit Ltd
Address
PO Box 28 293 Birmingham New Road Dudley
Postcode
DY1 4SJ
Country
West Midlands
Phone
0121 5207987
General Email
enquiries@waterfit.co.uk

View All Listings by this Company

Print This Approval


#2312365

Range of water meter manifolds with plastic bodies which incorporates a (spherical) stop valve. The MB40408256BM, MB40408254NM, MB40408326BM, MB40408324BM, MB40425256BM MB40425254BM, MB40432326BM and MB40432324BM models incorporate a non-return valve. The MB40408255DCVBM and MB40408254DCVBM models incorporate two non-return valves. The product is supplied with pipe liners for use with the pushfit connections. The pushfit connections are for use with PE80 pipes (manufactured to BS EN 12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2312365
Expiry date:
31/12/2028
Size:
MB40425254BM & MB40425256BM: 25mm pushfit. MB40432324BM & MB40432326BM: 32mm pushfit. All other models: 2” BSP (F).
Marking:
Atlantic Plastics logo on body. Talbot and size marked on pushfit connections.
Installation Requirements:
R001
Model:
MB40408256BM: Multi Manifold 6 Port - 2” BSP inlet x 6 outlet (25mm Willow type 2 Bend), MB40408254NM: Multi Manifold 4 Port - 2” BSP inlet x 4 outlet (25mm Willow type 2 Bend), MB40408326BM: Multi Manifold 6 Port - 2” BSP inlet x 6 outlet (32mm Solid type 1 Bend), MB40408324BM: Multi Manifold 4 Port - 2” BSP inlet x 4 outlet (32mm Solid type 1 Bend), MB40408255DCVBM: Multi Manifold 6 Port - 2” BSP inlet x 6 outlet (25mm Willow type 2 Bend), MB40408254DCVBM: Multi Manifold 4 Port - 2” BSP inlet x 4 outlet (25mm Willow type 2 Bend), MB40425256BM: Multi Manifold 6 Port - 6 Inlet x 6 Outlet (25mm Willow type 2 Bend), MB40425254BM: Multi Manifold 4 Port - 4 Inlet x 4 Outlet (25mm Willow type 2 Bend), MB40432326BM: Multi Manifold 6 Port - 6 Inlet x 6 Outlet (32mm Solid type 1 Bend), MB40432324BM: Multi Manifold 4 Port - 4 Inlet x 4 Outlet (32mm Solid type 1 Bend).
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Brackla Industrial Estate, Coity, Bridgend
Postcode
CF31 2AX

View All Listings by this Company

Print This Approval


#2312366

Range of water meter manifolds with plastic (MBB1100 prefix models) or gunmetal (MBB2010 prefix models) manifolds. The inlet to the manifold incorporates a quarter turn spherical valve. The products also incorporate a non-return valve. Maximum working pressure 12.5 bar. Cold water use only

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2312366
Expiry date:
31/12/2028
Note:
Because there are no accepted tests, WRAS approval does not include an assessment of its ability to prevent migration of contaminants through the wall from the surrounding soil.
Size:
¾” BSP (F)
Marking:
EBCO (brand of Atlantic Plastic Ltd) and flow arrow on body.
Installation Requirements:
R001
Model:
MBB1100FCV, MBB1100FCB, MBB1100FCBK, MBB1100FCDI, MBB1100FCSTW, MBB2010B, MBB2010C, MBB2010DI.
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Brackla Industrial Estate, Coity, Bridgend
Postcode
CF31 2AX

View All Listings by this Company

Print This Approval


#240202009

Range of pressure reducing valve assemblies with brass bodies incorporating spherical stop valve, pressure gauge and double check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). Models TVAP250001 & TVAP250005 also incorporate a water meter port. Maximum supply pressure 16 bar. Outlet pressure setting is adjustable in the range 1.5 to 6 bar. Maximum operating temperature 65°C

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
240202009
Expiry date:
28/02/2029
Size:
See Model
Marking:
Reliance logo, size, PN, DR cast into body Pressure, maximum temperature and reliance on body of PRV.
Installation Requirements:
R001
Model:
TVAP250001 ¾” BSP (F) x ¾” BSP (F) TVAP250005 1” BSP (F) x 1” BSP (F) TVAP250050 ¾” BSP (F) x ¾” BSP (F) TVAP250055 1” BSP (F) x 1” BSP (F)
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#240204010

Water meter manifold assembly with gunmetal body, incorporating a servicing valve and a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Max operating pressure 16 bar Maximum operating temperature Cold water only

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
240204010
Expiry date:
28/02/2029
Size:
¾ BSP (F)
Marking:
Flow arrow inlet and outlet sizes and Company logo (e.g Waterfit, WF)
Installation Requirements:
R001
Model:
MK8000003184
Factor:
Waterfit Ltd
Company Name
Waterfit Ltd
Address
PO Box 28 293 Birmingham New Road Dudley
Postcode
DY1 4SJ
Country
West Midlands
Phone
0121 5207987
General Email
enquiries@waterfit.co.uk

View All Listings by this Company

Print This Approval


#240204028

Range of water meter housings incorporating DZR brass bodies and a check valve cartridge however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
240204028
Expiry date:
28/02/2029
Size:
see model
Marking:
Eagle, flow arrow CR on body
Installation Requirements:
R001
Model:
4414-WMH-1: 15mm compression, 4414-WMH-2: 22mm compression, 4414-WMH-20: ¾” BSP (F).
Factor:
SCE Technology (Ningbo) Co.,Ltd.
Company Name
SCE Technology (Ningbo) Co.,Ltd.
Address
No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Zhejiang
Country
China

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.