Water Meter Manifolds

Section Code 1510 :

Back To Directory Sections

#2001054

Water meter manifold with gunmetal body, brass connections, EPDM seal and NBR ‘O’-rings. The product incorporates a non-return valve after the meter location and a servicing valve on the inlet. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2001054
Expiry date:
31/01/2025
Size:
1” BSP (F) x 1” BSP (F)
Marking:
Waterfit and Waterfit logo on body.
Installation Requirements:
R001
Model:
MK9000003993 2" Gunmetal Meterfit Boundary Box
Manufacturer:
Waterfit Ltd
Company Name
Waterfit Ltd
Address
PO Box 28 293 Birmingham New Road Dudley
Postcode
DY1 4SJ
Country
West Midlands
Phone
0121 5207987

View All Listings by this Company

Print This Approval


#2001058

Range of water meter manifolds with plastic bodies incorporating a drain off valve. Inlets incorporate a plastic strainer. Products also incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Cold water use only. Maximum working pressure 16.0 bar.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2001058
Expiry date:
31/01/2025
Note:
For above ground use only
Size:
15mm, 22mm compression (CU), 25mm spigot (PF) inlets to 15mm or 22mm compression (CU) outlets depending on model
Marking:
Talis logo and flow arrow on body
Installation Requirements:
R001
Model:
MA3261515AM Internal Meter Manifold 15 CU Inlet / Outlet MA3261522AM Internal Meter Manifold 15 CU Inlet / 22CU Outlet MA3262215AM Internal Meter Manifold 22 CU Inlet / 15CU Outlet MA3262222AM Internal Meter Manifold 22 CU Inlet / Outlet MA3262515AM Internal Meter Manifold 25 PF Inlet / 15CU Outlet MA3262522AM Internal Meter Manifold 25 PF Inlet / 22CU Outlet
Manufacturer:
Atlantic Plastics Ltd
Company Name
Atlantic Plastics Ltd
Address
Edison Road Hams Hall Distribution Park Coleshill
Postcode
B46 1AB
Country
Birmingham
Phone
01675 437 900

View All Listings by this Company

Print This Approval


#2102804

Range of water meter manifolds with plastic bodies. The inlets incorporate a spherical valve and a non-return valve (not suitable for back flow protection). Model MD1010101BM is for use with Irish Heavy gauge pipe manufactured to 15134/1977. All other models are for use with blue MDPE pipe manufactured to EN12201. Maximum working pressure 12.5 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2102804
Expiry date:
28/02/2026
Size:
see model
Marking:
Ebco and flow arrow on body.
Installation Requirements:
R001 R008
Model:
MB1012525BM: 25mm pushfit. MB1010202BM: 20mm pushfit. MB1010101BM: ½” Irish pushfit. MB1020303BM: ¾” BSP (F).
Manufacturer:
Atlantic Plastics Ltd
Company Name
Atlantic Plastics Ltd
Address
Edison Road Hams Hall Distribution Park Coleshill
Postcode
B46 1AB
Country
Birmingham
Phone
01675 437 900

View All Listings by this Company

Print This Approval


#2101327

Range of water meter manifolds with a plastic body and a spherical valve at the inlet. Models MB2012525DM & MB2010303DM incorporates two single check valve cartridges, all other models incorporate one single check valve however, the complete product has not been fully tested to demonstrate it provides backflow protection Model MB201010BM is for use with Irish Heavy gauge pipe manufactured to 15134/1977. All other models are for use with blue MDPE pipe manufactured to EN12201. Maximum working pressure 12.5 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2101327
Expiry date:
31/01/2026
Size:
see mdoel
Marking:
Ebco and flow arrow on body
Installation Requirements:
R001 R008
Model:
MB2012525BM: 25mm pushfit. MB2012020BM: 20mm pushfit. MB2010101BM: ½” HG Irish compression. MB2010303BM: ¾” BSP (F). MB2011010BM: 25mm compression. MB2012525DM: 25mm pushfit. MB2010303DM: ¾” BSP (F).
Manufacturer:
Atlantic Plastics Ltd
Company Name
Atlantic Plastics Ltd
Address
Edison Road Hams Hall Distribution Park Coleshill
Postcode
B46 1AB
Country
Birmingham
Phone
01675 437 900

View All Listings by this Company

Print This Approval


#2106022

Range of water meter manifolds incorporating DZR brass bodies, PTFE washers, a non-return valve and ball valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
WRAS Approval Number:
2106022
Expiry date:
30/06/2026
Size:
¾” BSP (F) inlet and outlet
Marking:
MWM, CR & flow arrow on body.
Installation Requirements:
R001
Model:
WBBADAPT112-BV
Factor:
MWM Distributors Ltd
Company Name
MWM Distributors Ltd
Address
Units 52 & 53 Enfield Industrial Estate Windsor Road
Postcode
B97 6DE
Country
Redditch
Phone
+44 (0) 1527 68200
General Email
sales@mwmdistributorltd.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 5

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.