Fittings for use with Tube and Pipe

Section Code 1180 : Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

Back To Directory Sections

#1904700

‘Tectite 316’ range of push-fit fittings with stainless steel bodies incorporating EPDM ‘O’-rings for use with stainless steel tube (Grade 316 manufactured to EN 10312). Maximum working pressure and operating temperatures: Fittings up to and including 28mm: 20.0 bar @ 30°C, 16.0 bar @ 65°C, 10.0 bar @ 100°C. Fittings over 35mm: 16.0 bar @ 30°C, 10.0 bar @ 65°C, 6.0 bar @ 100°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1904700
Expiry date:
30/04/2024
Size:
15mm – 54mm
Marking:
Tectite 316 & size on 15mm-28mm. Tectite 316, USA & size on 35mm-54mm.
Installation Requirements:
R001
Model:
TS1/TS270 - 15mm to 54mm. TS1 slip /TS270S - 15mm to 28mm. TS2/TS270G - 15mm x ½” BSP (F) to 54mm x 2” BSP (F). TS3/TS243G - 15mm x ½” BSP (M) to 54mm x 2” BSP (M). TS6/TS243 - 18mm x 15mm to 54mm x 42mm. TS12/TS090 - 15mm to 54mm. TS12S/TS092 - 15mm to 28mm. TS13/TS092G- 15mm x ½” BSP (M) to 28mm x 1” BSP (M). TS14/TS090G - 15mm x ½” BSP (F) to 22mm x 1” BSP (F). TS15/TS471G - 15mm x ½” BSP (F) to 22mm x ¾” BSP (F). TS18/TS002A - 15mm to 54mm. TS18S/TS001 - 15mm to 28mm. TS21/TS041 - 15mm to 54mm. TS21S/TX040 - 15mm to 54mm. TS24/TS130 - 15mm to 54mm. TS25/TS130 - 18mm x 18mm x 15mm to 54mm x 54mm x 42mm. TS30/TS130G - 15mm x 15mm x ½” BSP (F) to 42mm x 42mm x ½” BSP (F). TS61/TS301 - 15mm to 54mm.
Manufacturer:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
01302 560560

View All Listings by this Company

Print This Approval


#1903085

Range of ‘plug & play’ push-fit couplers incorporating EDPM seals. For use with PE pipe (EN12201). Maximum working pressure varies by size: 90mm – 200mm 16.0 bar, 225mm & 250mm 10.0 bar. Cold water use only. For above and below ground use.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1903085
Expiry date:
31/03/2024
Size:
90mm – 250mm
Marking:
SAB spa logo, SAB, pressure rating & size on body
Installation Requirements:
R001
Model:
0160090000 - 90mm 0160110000 - 110mm 0160125000 - 125mm 0160140000 - 140mm 0160160000 - 160mm 0160180000 - 180mm 0160200010 - 200mm 0160225010 - 225mm 0160250010 - 250mm
Factor:
FPP SCOTLAND LTD
Company Name
FPP SCOTLAND LTD
Address
24 Queen Elizabeth Avenue Hillington Glasgow
Postcode
G52 4NQ

View All Listings by this Company
Manufacturer:
Sab SpA
Company Name
Sab SpA
Address
Via Salvo D'acquiso, 61048 Sant'Angelo In Vado (PU)
Country
Italy

View All Listings by this Company

Print This Approval


#1904070

Range of brass push-fit fittings incorporating EDPM O-rings. For use with Irish copper pipe Maximum working pressure 16.0 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1904070
Expiry date:
30/04/2024
Marking:
IDC logo: E mark (~E~ within circle) & size on body
Installation Requirements:
R001
Model:
Elbow fitting: 2PAB014, 2PAB021. Pushfit fiting End: 2PAD014, 2PAD021. Pushfit straight fitting: 2PAA014, 2PAA021. Pushfit Straight Pushfit x Pipe: 2PPA142. Pushfit straight reduced Fitting: 2PAA121. Pushfit Tee Fitting: 2PAC014, 2PAC021. Pushfit Tee reduced: 2PAC221, 2PAC212, 2PAC211 Max.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Country
China

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou
Country
Zhejiang,

View All Listings by this Company

Print This Approval


#1904906

Range of Twistloc push-fit fittings with PEX or polysulphone bodies incorporating EPDM ‘O’-rings. The fittings are supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part part 2) and copper pipe. Maximum working pressure and operating temperature: 3.0 bar@92°C, 4.0 bar@82°C & 12.5 bar@20°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1904906
Expiry date:
30/04/2024
Size:
10mm, 15mm, 22mm, 28mm
Marking:
Twisloc logo, TLC & size on body.
Installation Requirements:
R001
Model:
TWISTLOC FITTINGS: SRDE6764M-15mmX1/2"BSP DROP EAR ELBOW SRF6764M- 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M - 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M - 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M - 28mmX1"BSP FEMALE ADAPTOR SPU6711M -10mmX10mm UNION CONNECTOR SPU6766M - 15mmX15mm UNION CONNECTOR SPU6744M - 22mmX22mm UNION CONNECTOR SPU6700M - 28mmX28mm UNION CONNECTOR SPU6761M - 15mmX10mm REDUCING UNION CONNECTOR SPU6746M - 22mmX15mm REDUCING UNION CONNECTOR SRSE6714M - 10mmX1/2"BSP SWIVEL ELBOW UNION (HAND TIGHTEN) SRSE6764M -15mmX1/2"BSP SWIVEL ELBOW UNION (HAND TIGHTEN) SRSE6765M -15mmX3/4"BSP SWIVEL ELBOW UNION (HAND TIGHTEN) SRSE6714BM - 10mmX1/2"BSP SWIVEL ELBOW UNION (BRASS NUT) SRSE6764BM - 15mmX1/2"BSP SWIVEL ELBOW UNION (BRASS NUT) SRSE6765BM -15mmX3/4"BSP SWIVEL ELBOW UNION (BRASS NUT) SPSU6714M - 10mmX1/2"BSP SWIVEL UNION CONNECTOR (HAND TIGHTEN) SRSU6764M - 15mmX1/2"BSP SWIVEL UNION CONNECTOR (HAND TIGHTEN) SRSU6765M - 15mmX3/4"BSP SWIVEL UNION CONNECTOR (HAND TIGHTEN) SPSU6745M - 22mmX3/4"BSP SWIVEL UNION CONNECTOR (HAND TIGHTEN) SPSU6714BM -10mmX1/2"BSP SWIVEL UNION CONNECTOR (BRASS NUT) SRSU6764BM - 15mmX1/2"BSP SWIVEL UNION CONNECTOR (BRASS NUT) SRSU6765BM - 15mmX3/4"BSP SWIVEL UNION CONNECTOR (BRASS NUT) SPSU6745BM - 22mmX3/4"BSP SWIVEL UNION CONNECTOR (BRASS NUT) SPST671M - 10mm TUBE END STOP SPST676M - 15mm TUBE END STOP SPST674M - 22mm TUBE END STOP SRST670M - 28mm TUBE END STOP SPE6711M - 10mmX10mm ELBOW UNION SPE6766M -15mmX15mm ELBOW UNION SPE6744M- 22mmX22mm ELBOW UNION SPE6700M -28mmX28mm ELBOW UNION SPE6761M - 15mmX10mm ELBOW UNION SPE6746M -22mmX15mm ELBOW UNION SPATE6766M -15mm x 15mm 135degree STEM ELBOW SPATE6744M - 22mm x 22mm 135degree STEM ELBOW SPR6716M - 10mmX15mm REDUCING CONNECTOR SPR6764M - 15mmX22mm REDUCING CONNECTOR SPR6760M - 15mmX28mm REDUCING CONNECTOR SPR6740M - 22mmX28mm REDUCING CONNECTOR SPT67111M - 10mmX10mmX10mm TEE UNION SPT67666M - 15mmX15mmX15mm TEE UNION SPT67444M - 22mmX22mmX22mm TEE UNION SPT67000M - 28mmX28mmX28mm TEE UNION SPT67611M - 15mmX10mmX10mm REDUCING TEE UNION SPT67661M - 15mmX15mmX10mm REDUCING TEE UNION SPT67664M -15mmX15mmX22mm REDUCING TEE UNION SPT67466M - 22mmX15mmX15mm REDUCING TEE UNION SPT67464M - 22mmx15mmx22mm REDUCING TEE UNION SPT67441M - 22mmx22mmx10mm REDUCING TEE UNION SPT67446M - 22mmX22mmX15mm REDUCING TEE UNION SPT67044M - 28mmX22mmX22mm REDUCING TEE UNION SPT67040M -28mmX22mmX28mm REDUCING TEE UNION SPT67001M - 28mmX28mmX10mm REDUCING TEE UNION SPT67006M - 28mmX28mmX15mm REDUCING TEE UNION SPT67004M - 28mmX28mmX22mm REDUCING TEE UNION SPTT67441M -22mX22mmX10mm TUBE TEE UNION SPTT67446M - 22mX22mmX15mm TUBE TEE UNION SPTE6711M - 10mmX10mm TUBE ELBOW UNION SPTE6716M - 10mmX15mm TUBE ELBOW UNION SPTE6766M - 15mmX15mm TUBE ELBOW UNION SPTE6744M - 22mmX22mm TUBE ELBOW UNION SRMC6764M -15mmX1/2"BSPT MALE CONNECTOR SRME6764M - 15mmX1/2"BSPT MALE ELBOW SRFWC6741M - 22mmX10mm 4WAY MANIFOLD SRU6766SM - 15mmX15mm SLIP UNION COUPLING SRU6744SM - 22mmX22mm SLIP UNION COUPLING STS10M - 10mm PIPE INSERT STS15M -15mm PIPE INSERT STS22M - 22mm PIPE INSERT STS28M - 28mm PIPE INSERT
Factor:
SNC Corporation
Company Name
SNC Corporation
Address
Chungcheonmacha-Ro Bupyeong-Gu 21301
Country
South Korea

View All Listings by this Company

Print This Approval


#1905333

‘VSH SudoPress’ range of copper or gunmetal press-fit fittings with EPDM ‘O’ rings for use with copper pipe. Joints are achieved by the use of a press fitting tool. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1905333
Expiry date:
31/05/2024
Size:
15mm – 54mm
Marking:
SudoPress on body.
Installation Requirements:
R001
Model:
‘VSH SudoPress’ range
Factor:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
01302 560560

View All Listings by this Company

Print This Approval


#1905363

>B< Sonic range of Brass & Copper push fit fittings incorporating EPDM rubber ‘O’-rings for use with copper pipe. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1905363
Expiry date:
31/05/2024
Size:
See model.
Marking:
>B< and size on fitting body.
Installation Requirements:
R001
Model:
90° elbow (S090): 12 - 22mm. Equal tee (S130): 12x12x12mm - 22x22x22mm. Reducer branch tee (S130): 22x22x15mm. Straight coupler (S270): 12 - 22mm. Models added May 2019: Coupler 10mm - 28mm. Elbow 10mm - 28mm. Street Elbow 15mm. Equal Tee 10mm - 28mm. Tee - Reduced branch 22x22x15, 14x14x12, 16x16x12, 16x16x14 & 18x18x14. Tee - Reduced End & Branch 22x15x15. Tee - Reduced End 22x15x22. Tee - Reduced branch 28x28x22. Reduced Coupler 12x10mm, 14x12mm, 16x12mm & 16x14mm. Fitting Reducer 18x15mm, 22x18mm, 15x12mm, 15x10mm, 22x15mm & 28x22mm. Telescopic Connector - single leg 15mm, 18mm, 22mm & 28mm. Straight Connector – Male 15x1/2", 22x3/4", 28x1.1/4" & 28x1". Straight Connector – Female 15x1/2", 28x1.1/4", 22x3/4" & 28x1". Bent Tap Connector 15x1/2". Straight Tap Connector 15x1/2" Straight Tap Connector 22x3/4" Tee - With Female Branch 15x1/2"x15. Stop End 10mm, 15mm, 18mm & 22mm. Wall Plate Elbow 15x1/2". Models added November 2019: Straight Connector - Female 18x1/2 Straight Connector - Male 18x1/2 Street Elbow - 18mm, 22mm Male Elbow - 15x1/2 Female Elbow - 15x1/2 Reduced Coupler - 18x15, 22x15
Factor:
Conex Universal Ltd
Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 121 5772831
General Email
salesuk@ibpgroup.com

View All Listings by this Company

Print This Approval


#1905364

“B Profile SS” range of 316L & 304 stainless steel press fittings with EPDM ‘O’-rings for use with stainless steel pipe manufactured to EN 10312. Joints are achieved by the use of a press fitting tool. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1905364
Expiry date:
31/05/2024
Size:
See model
Marking:
IDC & Banninger on body
Installation Requirements:
R001
Model:
BEND: 2SBA011 PS13 15X1/2 2SBA021 PS13 18X1/2 2SBA022 PS13 18X3/4 2SBA032 PS13 22X3/4 2SBA043 PS13 28X1 2SBA054 PS13 35X1.1/4 2SBA065 PS13 42X1.1/2 2SBA077 PS13 54X2 2SBB011 PS14 15X1/2 2SBB021 PS14 18X1/2 2SBB022 PS14 18X3/4 2SBB032 PS14 22X3/4 2SBB043 PS14 28X1 2SBB054 PS14 35X1.1/4 2SBB065 PS14 42X1.1/2 2SBB077 PS14 54X2 2SBN011 PS12 15MM 2SBN022 PS12 18MM 2SBN033 PS12 22MM 2SBN044 PS12 28MM 2SBN055 PS12 35MM 2SBN066 PS12 42MM 2SBN077 PS12 54MM ELBOW: 2SBC011 PS14 15X1/2 2SBC021 PS14 18X1/2 2SBC031 PS14 22X1/2 2SBC032 PS14 22X3/4 2SBC043 PS14 28X1 2SBC054 PS14 35X1.1/4 2SBD011 90 SS 15x1/2MI CRIMP 2SBD021 90 SS 18x1/2MI CRIMP TEE: 2SBE111 PS30 15X15X1/2 2SBE212 PS30 18X18X1/2 2SBE222 PS30 18X18X3/4 2SBE313 PS30 22X22X1/2 2SBE323 PS30 22X22X3/4 2SBE414 PS30 28X28X1/2 2SBE424 PS30 28X28X3/4 2SBE434 PS30 28X28X1 2SBE515 PS30 35X35X1/2 2SBE525 PS30 35X35X3/4 2SBE545 PS30 35X35X1.1/4 2SBE616 PS30 42X42X1/2 2SBE626 PS30 42X42X3/4 2SBE656 PS30 42X42X1.1/2 2SBE717 PS30 54X54X1/2 2SBE727 PS30 54X54X3/4 2SBE777 PS30 54X54X2 STRAIGHT CONNECTOR: 2SBF011 PS3 15X1/2 2SBF021 PS3 18X1/2 2SBF022 PS3 18X3/4 2SBF031 PS3 22X1/2 2SBF032 PS3 22X3/4 2SBF033 PS3 22X1 2SBF042 PS3 28x3/4 2SBF043 PS3 28X1 2SBF054 PS3 35X1.1/4 2SBF065 PS3 42X1.1/2 2SBF077 PS3 54X2 2SBG011 PS2 15X1/2 2SBG021 PS2 18X1/2 2SBG022 PS2 18X3/4 2SBG031 PS2 22X1/2 2SBG032 PS2 22X3/4 2SBG033 PS2 22X1 2SBG042 PS2 28X3/4 2SBG043 PS2 28X1 2SBG054 PS2 35X1.1/4 2SBG065 PS2 42X1.1/2 2SBG077 PS2 54X2 2SBI011 PS69F 15X1/2 2SBI012 PS69F 15X3/4 2SBI021 PS69F 18X1/2 2SBI022 PS69F 18X3/4 2SBI032 PS69F 22X3/4F 2SBI033 PS69F 22X1 2SBI043 PS69F 28X1 2SBI054 PS69F 35X1.1/4 2SBI065 PS69F 42X1.1/2 2SBI077 PS69F 54X2 2SBJ011 PS69 15X1/2 2SBJ021 PS69 18X1/2 2SBJ032 PS69 22X3/4 2SBJ043 PS69 28X1 2SBJ054 PS69 35X1.1/4 2SBJ065 PS69 42X1.1/2 2SBJ077 PS69 54X2 SLIP COUPLER 2SBH011 PS1S 15MM 2SBH022 PS1S 18MM 2SBH033 PS1S 22MM 2SBH044 PS1S 28MM 2SBH055 PS1S 35MM 2SBH066 PS1S 42MM 2SBH077 PS1S 54MM FLAT FACE UNION: 2SBK012 PS43 15x3/4 2SBK022 PS43 18x3/4 2SBK032 PS43 22x3/4 2SBK033 PS43 22x1 2SBK043 PS43 28x1 2SBK044 PS43 28x1.1/4 2SBK055 PS43 35x1.1/2 WALL PLATE ELBOW 2SBL011 PS44 15x1/2 2SBL021 PS44 18x1/2 2SBL032 PS44 22x3/4 2SBL043 PS44 28x1 STREET BEND: 2SBM011 P12S 15MM 2SBM022 P12S 18MM 2SBM033 P12S 22MM 2SBM044 P12S 28MM 2SBM055 P12S 35MM 2SBM066 P12S 42MM 2SBM077 P12S 54MM 90DEG STREET BEND: 2SC7011 PS50 15MM 2SC7022 PS50 18MM 2SC7033 PS50 22MM 2SC7044 PS50 28MM 2SC7055 PS50 35MM 2SC7066 PS50 42MM 2SC7077 PS50 54MM 45DEG ST BEND: 2SBO011 PS21S 15MM 2SBO022 PS21S 18MM 2SBO033 PS21S 22MM 2SBO044 PS21S 28MM 2SBO055 PS21S 35MM 2SBO066 PS21S 42MM 2SBO077 PS21S 54MM OBTUSE BEND: 2SBP011 PS21 15MM 2SBP022 PS21 18MM 2SBP033 PS21 22MM 2SBP044 PS21 28MM 2SBP055 PS21 35MM 2SBP066 PS21 42MM 2SBP077 PS21 54MM CROSS SHORT: 2SC8011 PS51 15MM 2SC8022 PS51 18MM 2SC8033 PS51 22MM 2SC8044 PS51 28MM 2SC9011 PS52 15MM 2SC9022 PS52 18MM 2SC9033 PS52 22MM 2SC9044 PS52 28MM EQUAL TEE: 2SBQ111 PS24 15MM 2SBQ222 PS24 18MM 2SBQ333 PS24 22MM 2SBQ444 PS24 28MM 2SBQ555 PS24 35MM 2SBQ666 PS24 42MM 2SBQ777 PS24 54MM RB TEE 2SBQ212 PS25 18X18X15 2SBQ313 PS25 22X22X15 2SBQ323 PS25 22X22X18 2SBQ414 PS25 28X28X15 2SBQ424 PS25 28X28X18 2SBQ434 PS25 28X28X22 2SBQ515 PS25 35X35X15 2SBQ525 PS25 35X35X18 2SBQ535 PS25 35X35X22 2SBQ545 PS25 35X35X28 2SBQ636 PS25 42X42X22 2SBQ646 PS25 42X42X28 2SBQ656 PS25 42X42X35 2SBQ737 PS25 54X54X22 2SBQ747 PS25 54X54X28 2SBQ757 PS25 54X54X35 2SBQ767 PS25 54X54X42 FITTED REDUCER: 2SBR021 PS6 18X15 2SBR031 PS6 22X15 2SBR032 PS6 22X18 2SBR041 PS6 28X15 2SBR042 PS6 28X18 2SBR043 PS6 28X22 2SBR052 PS6 35X18 2SBR053 PS6 35X22 2SBR054 PS6 35X28 2SBR064 PS6 42X28 2SBR065 PS6 42X35 2SBR074 PS6 54X28 2SBR075 PS6 54X35 2SBR076 PS6 54X42 COUPLER: 2SBS011 PS1 15MM 2SBS022 PS1 18MM 2SBS033 PS1 22MM 2SBS044 PS1 28MM 2SBS055 PS1 35MM 2SBS066 PS1 42MM 2SBS077 PS1 54MM STOP END: 2SBT011 PS61 15MM 2SBT022 PS61 18MM 2SBT033 PS61 22MM 2SBT044 PS61 28MM 2SBT055 PS61 35MM 2SBT066 PS61 42MM 2SBT077 PS61 54MM Models added May 2022: STRAIGHT CONNECTOR: 2SBF010L - 15mmx3/8"M 2SBF010 - 15mmx3/8"M 2SBF012L - 15mmx3/4"M 2SBF012 - 15mmx3/4"M 2SBF044L - 28mmx11/4"M 2SBF044 - 28mmx11/4"M 2SBF051L - 35mmx1/2"M 2SBF051 - 35mmx1/2"M 2SBF053L - 35mmx1"M 2SBF053 - 35mmx1"M 2SBF055L - 35mmx1.1/2"M 2SBF055 - 35mmx1.1/2"M 2SBF064L - 42mmx11/4"M 2SBF064 - 42mmx11/4"M 2SBF075L - 54mmx1.1/2"M 2SBF075 - 54mmx1.1/2"M 2SBG010L - 15mmx3/8"F 2SBG010 - 15mmx3/8"F 2SBG041L - 28mmx1/2"F 2SBG041 - 28mmx1/2"F 2SBG044L - 28mmx1.1/4"F 2SBG044 - 28mmx1.1/4"F 2SBG053L - 35mmx1"F 2SBG053 - 35mmx1"F 2SBG055L - 35mmx1.1/2"F 2SBG055 - 35mmX1.1/2"F 2SBG064L - 42mmX1.1/4"F 2SBG064 - 42mmX1.1/4"F 2SBG075L - 54mmx1.1/2"F 2SBG075 - 54mmx1.1/2"F 2SBR051L - 35mmx15mm 2SBR051 - 35mmX15mm 2SBR061L - 42mmx15mm 2SBR061 - 42mmx15mm 2SBR063L - 42mmx22mm 2SBR063 - 42mmx22mm 2SBR071L - 54mmx15mm 2SBR071 - 54mmx15mm 2SBR072L - 54mmx22mm 2SBR072 - 54mmx22mm CROSS TWO LEVELS: 2SBV011L - 15mm 2SBV011 - 15mm 2SBV021L - 18mmx15mm 2SBV021 - 18mmx15mm 2SBV031L - 22mmx15mm 2SBV031 - 22mmx15mm 2SBV032L - 22mmx18mm 2SBV032 - 22mmx18mm 2SBV041L - 28mmx15mm 2SBV041 - 28mmx15mm 2SBV042L - 28mmx18mm 2SBV042 - 28mmx18mm REDUCED COUPLER: 2SBS021L - 18x15mm 2SBS021 - 18x15mm 2SBS031L - 22x15mm 2SBS031 - 22x15mm 2SBS032L - 22x18mm 2SBS032 - 22x18mm 2SBS041L - 28x15mm 2SBS041 - 28x15mm 2SBS042L - 28x18mm 2SBS042 - 28x18mm 2SBS043L - 28x22mm 2SBS043 - 28x22mm 2SBS053L - 35x22mm 2SBS053 - 35x22mm 2SBS054L - 35x28mm 2SBS054 - 35x28mm 2SBS063L - 42x22mm 2SBS063 - 42x22mm 2SBS064L - 42x28mm 2SBS064 - 42x28mm 2SBS065L - 42x35mm 2SBS065 - 42x35mm 2SBS074L - 54x28mm 2SBS074 - 54x28mm 2SBS075L - 54x35mm 2SBS075 - 54x35mm 2SBS076L - 54x42mm 2SBS076 - 54x42mm Models ending L = SS316L stainless steel, models without L suffix = SS304 stainless steel. SS316L stainless steel models are for use with SS316L stainless steel pipe manufactured to EN 10312, with dimension of pipe: O.D. x wall thickness 15mmx1mm 18mmx1mm 22mmx1.2mm 28mmx1.2mm 35mmx1.5mm 42mmx1.5mm 54mmx1.5mm SS304 stainless steel models are for use with SS304 stainless steel pipe manufactured to EN 10312, with dimension of pipe: O.D. x wall thickness 15mmx1mm 18mmx1mm 22mmx1.2mm 28mmx1.2mm 35mmx1.5mm 42mmx1.5mm 54mmx1.5mm
Factor:
Ningbo IDC International Trading Co. Ltd.
Company Name
Ningbo IDC International Trading Co. Ltd.
Address
Floor 43, Building A, International Trade Center, Ningbo Chamber of Commerce, No. 558 of Taikangzhong Road, Yinzhou District, Ningbo
Country
China

View All Listings by this Company
Manufacturer:
Zhejiang Banninger Piping System Ltd.
Company Name
Zhejiang Banninger Piping System Ltd.
Address
Bingang INUSTRIAL CITY YUHUAN ZHEJIANG

View All Listings by this Company

Print This Approval


#1904911

Range of Flomasta push-fit fittings with PEX or polysulphone bodies incorporating EPDM ‘O’-rings. The fittings are supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part part 2) and copper pipe. Maximum working pressure and operating temperature: 3.0 bar@92°C, 4.0 bar@82°C & 12.5 bar@20°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1904911
Expiry date:
30/04/2024
Size:
10mm, 15mm, 22mm, 28mm
Marking:
Twisloc logo, TLC & size on body.
Installation Requirements:
R001
Model:
Flomasta FITTINGS: SRDE6764M-15mmX1/2"BSP DROP EAR ELBOW SRF6764M- 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M - 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M - 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M - 28mmX1"BSP FEMALE ADAPTOR SPU6711M -10mmX10mm UNION CONNECTOR SPU6766M - 15mmX15mm UNION CONNECTOR SPU6744M - 22mmX22mm UNION CONNECTOR SPU6700M - 28mmX28mm UNION CONNECTOR SPU6761M - 15mmX10mm REDUCING UNION CONNECTOR SPU6746M - 22mmX15mm REDUCING UNION CONNECTOR SRSE6714M - 10mmX1/2"BSP SWIVEL ELBOW UNION (HAND TIGHTEN) SRSE6764M -15mmX1/2"BSP SWIVEL ELBOW UNION (HAND TIGHTEN) SRSE6765M -15mmX3/4"BSP SWIVEL ELBOW UNION (HAND TIGHTEN) SRSE6714BM - 10mmX1/2"BSP SWIVEL ELBOW UNION (BRASS NUT) SRSE6764BM - 15mmX1/2"BSP SWIVEL ELBOW UNION (BRASS NUT) SRSE6765BM -15mmX3/4"BSP SWIVEL ELBOW UNION (BRASS NUT) SPSU6714M - 10mmX1/2"BSP SWIVEL UNION CONNECTOR (HAND TIGHTEN) SRSU6764M - 15mmX1/2"BSP SWIVEL UNION CONNECTOR (HAND TIGHTEN) SRSU6765M - 15mmX3/4"BSP SWIVEL UNION CONNECTOR (HAND TIGHTEN) SPSU6745M - 22mmX3/4"BSP SWIVEL UNION CONNECTOR (HAND TIGHTEN) SPSU6714BM -10mmX1/2"BSP SWIVEL UNION CONNECTOR (BRASS NUT) SRSU6764BM - 15mmX1/2"BSP SWIVEL UNION CONNECTOR (BRASS NUT) SRSU6765BM - 15mmX3/4"BSP SWIVEL UNION CONNECTOR (BRASS NUT) SPSU6745BM - 22mmX3/4"BSP SWIVEL UNION CONNECTOR (BRASS NUT) SPST671M - 10mm TUBE END STOP SPST676M - 15mm TUBE END STOP SPST674M - 22mm TUBE END STOP SRST670M - 28mm TUBE END STOP SPE6711M - 10mmX10mm ELBOW UNION SPE6766M -15mmX15mm ELBOW UNION SPE6744M- 22mmX22mm ELBOW UNION SPE6700M -28mmX28mm ELBOW UNION SPE6761M - 15mmX10mm ELBOW UNION SPE6746M -22mmX15mm ELBOW UNION SPATE6766M -15mm x 15mm 135degree STEM ELBOW SPATE6744M - 22mm x 22mm 135degree STEM ELBOW SPR6716M - 10mmX15mm REDUCING CONNECTOR SPR6764M - 15mmX22mm REDUCING CONNECTOR SPR6760M - 15mmX28mm REDUCING CONNECTOR SPR6740M - 22mmX28mm REDUCING CONNECTOR SPT67111M - 10mmX10mmX10mm TEE UNION SPT67666M - 15mmX15mmX15mm TEE UNION SPT67444M - 22mmX22mmX22mm TEE UNION SPT67000M - 28mmX28mmX28mm TEE UNION SPT67611M - 15mmX10mmX10mm REDUCING TEE UNION SPT67661M - 15mmX15mmX10mm REDUCING TEE UNION SPT67664M -15mmX15mmX22mm REDUCING TEE UNION SPT67466M - 22mmX15mmX15mm REDUCING TEE UNION SPT67464M - 22mmx15mmx22mm REDUCING TEE UNION SPT67441M - 22mmx22mmx10mm REDUCING TEE UNION SPT67446M - 22mmX22mmX15mm REDUCING TEE UNION SPT67044M - 28mmX22mmX22mm REDUCING TEE UNION SPT67040M -28mmX22mmX28mm REDUCING TEE UNION SPT67001M - 28mmX28mmX10mm REDUCING TEE UNION SPT67006M - 28mmX28mmX15mm REDUCING TEE UNION SPT67004M - 28mmX28mmX22mm REDUCING TEE UNION SPTT67441M -22mX22mmX10mm TUBE TEE UNION SPTT67446M - 22mX22mmX15mm TUBE TEE UNION SPTE6711M - 10mmX10mm TUBE ELBOW UNION SPTE6716M - 10mmX15mm TUBE ELBOW UNION SPTE6766M - 15mmX15mm TUBE ELBOW UNION SPTE6744M - 22mmX22mm TUBE ELBOW UNION SRMC6764M -15mmX1/2"BSPT MALE CONNECTOR SRME6764M - 15mmX1/2"BSPT MALE ELBOW SRFWC6741M - 22mmX10mm 4WAY MANIFOLD SRU6766SM - 15mmX15mm SLIP UNION COUPLING SRU6744SM - 22mmX22mm SLIP UNION COUPLING STS10M - 10mm PIPE INSERT STS15M -15mm PIPE INSERT STS22M - 22mm PIPE INSERT STS28M - 28mm PIPE INSERT
Factor:
Kingfisher Plc.
Company Name
Kingfisher Plc.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX
Phone
+44 (0) 20 7372 8008

View All Listings by this Company
Manufacturer:
SNC Corporation
Company Name
SNC Corporation
Address
Chungcheonmacha-Ro Bupyeong-Gu 21301
Country
South Korea

View All Listings by this Company

Print This Approval


#1906106

Tectite Classic and Tectite Pro ranges of DZR brass push-fit fittings The Tectite Classic range is for use with copper tube (manufactured to BS 2871) and PEX & polybutylene tube (manufactured to BS 2871). The fittings are supplied with plastic inserts. The Tectite Pro range is for use with copper tube (manufactured to BS 2871). Maximum working pressures & operating temperatures: Tectite Classic fittings with copper pipe: 16.0 bar @ 30°C, 10.0 bar @ 65°C & 6.0 bar @ 95°C. Tectite Classic fittings with PEX & Polybutylene: 12.0 bar @ 20°C, 6.0 bar @ 65°C & 3.0 bar @ 92°C. Tectite Pro fittings (15mm - 28mm): 20.0 bar @ 30°C, 16.0 bar @ 65°C & 10.0 bar 114°C. Tectite Pro fittings (32mm - 54mm): 16.0 @ 30°C, 10.0 bar 65°C & 6.0 bar @ 90°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1906106
Expiry date:
30/06/2024
Size:
10mm – 54mm
Marking:
Tectite, size & CR on fitting body.
Installation Requirements:
R001
Model:
Tectite Classic and Tectite Pro ranges
Factor:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
01302 560560

View All Listings by this Company

Print This Approval


#1906080

Profipress & Sanpress ranges of gunmetal, copper or bronze (press-fit) fittings, with EPDM `O` rings. For use with copper tube (manufactured to BS EN 1057). Sizes 64mm – 108mm incorporate a stainless-steel grab ring. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1906080
Expiry date:
30/06/2024
Size:
12,15,18, 22, 28, 35, 42, 54mm XL sizes 64, 66.7, 76.1, 88.9, 108 mm.
Marking:
Viega, size, DVGW on body
Installation Requirements:
R001
Model:
Profipress & Sanpress ranges consisting of: Elbows: 2416, 2416XL, 2416.1, 2416.1XL, 2426, 2426XL, 2426.1, 2426.1XL, 2427, 2428. T-pieces: 2418, 2418.1, 2418XL, 2417.2XL. Adapter pieces: 2411XL,2412XL Couplings: 2415, 2415XL, 2415.3, 2415.5XL Reductions: 2415.1, 2415.1XL, 2415.2, 2416.2, 2426.2. Caps & plugs: 2456, 2456XL, 2456.1XL, 2457. Flanges: 2459.5XL. Gunmetal CC499K or CC246E/CuSi4Zn9MnP Elbows: 2216, 2216.1, 2226, 2226.1. T-pieces: 2218, 2217.1, 2217.2, 2217.4. Adapter pieces: 2211, 2211.1, 2211.2, 2211.4, 2212, 2212.1, 2212.2, 2212.3, 2214, 2214.1, 2214.2, 2214.3, 2215.6. Couplings: 2215, 2215.5, 2215.4. Reductions: 2215.1. Screw fittings: 2260, 2262, 2265, 2255, 2263, 2264, 2267. Flanges: 2259.5. Wall plates: 2225, 2225.5, 2225.6, 2228.7, 2217.3. Wall lead-ins: 2232.1, 2232.3. Cross pieces: 2244, 2247, 2248. Mounting units: 2221, 2221.1, 2222, 2222.6EX, 2222.05, 2222.2, 2229. Compensator: 2251.
Factor:
Viega GmbH & Co KG
Company Name
Viega GmbH & Co KG
Address
Viega Platz 1, D-57439 Attendorn
Country
Germany

View All Listings by this Company

Print This Approval


#1907009

Press-Inox range of stainless-steel crimped fittings with EPDM ‘O’ rings for use with stainless steel pipe (manufactured to EN10204). For above ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1907009
Expiry date:
31/07/2024
Size:
15mm - 108mm
Marking:
PI (abbreviation of Press-Inox) on body of fitting
Installation Requirements:
R001
Model:
Press-Inox range of fittings
Factor:
Anpro Pressfit PTE. Ltd
Company Name
Anpro Pressfit PTE. Ltd
Address
130 Second Lok Yang Road Singapore

View All Listings by this Company

Print This Approval


#1907036

Range of R-154 stainless steel pressed collars incorporating stainless steel bodies and are only to be used with stainless steel pipe. Maximum working pressure for sizes up to DN150 is 25.0 bar. Maximum working pressure for size DN200 is 16.0 bar. Maximum operating temperature 99°C

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1907036
Expiry date:
31/07/2024
Size:
DN 40 to DN 200
Marking:
Model, NORDS, size, material grading and pressure rating on fitting body
Installation Requirements:
R001
Model:
FCM0604420DHS. FCM0404420DHS. FCM0605420DHS. FCM0405420DHS. FCM0606920DHS. FCM0406920DHS. FCM0608420DHS. FCM0408420DHS. FCM0610630SPE. FCM0410630SPE. FCM0613130DHS. FCM0413130DHS. FCM0615630SPE. FCM0415630SPE. FCI0604820DHS. FCI0404820DHS. FCI0606020DHS. FCI0406020DHS. FCI0607620DHS. FCI0407620DHS. FCI0608820DHS. FCI0408820DHS. FCI0611430SPE. FCI0411430SPE. FCI0613930DHS. FCI0413930DHS. FCM0620630DHS. FCM0420630DHS. FCI0616826DHS. FCI0416826DHS. FCI0621930DHS. FCI0421930DHS.
Manufacturer:
Nords International AB
Company Name
Nords International AB
Address
Prostgaardsvagen 2 SE 655 60 MOLKOLM Sweden

View All Listings by this Company

Print This Approval


#1907050

Range of metric black, white or grey DMFit plastic pushfit fittings with EPDM ‘O’-rings for use with metric PEX barrier pipe manufactured to BS7291-2. Supplied with grey pipe inserts. Maximum operating parameters: 12.0 bar @cold water use only and 7.0 bar @ 65°C

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1907050
Expiry date:
31/07/2024
Note:
R008 applies to the white fittings only. The pipe inserts must be used when installing this system to maintain the validity of the approval
Size:
10, 15 & 22mm.
Marking:
DM and size on the fittings
Installation Requirements:
R001 R008
Model:
AFWC2210M: 22mm tube x 10mm tube, AMC1004M: 10mm tube x ¼” BSPT, AMC1006M: 10mm tube x ⅜” BSPT, AMC1007M: 10mm tube x ½” BSPT, AMC1506M: 15mm tube x ⅜” BSPT, AMC1507M: 15mm tube x ½” BSPT, AMC2209M: 22mm tube x ¾” BSPT, AEU1010M: 10mm tube x 10mm tube, AEU1515M: 15mm tube x 15mm tube, AEU2215M: 22mm tube x 15mm tube, AEU2222M: 22mm tube x 22mm tube, AME1004M: 10mm tube x ¼” BSPT, AME1006M: 10mm tube x ⅜” BSPT, AME1506M: 15mm tube x ⅜” BSPT, AME1507M: 15mm tube x ½” BSPT, AMES1004M: 10mm tube x ¼” BSPT, AMES1006M: 10mm tube x ⅜” BSPT, ARD1015M: 10mm tube x 15mm stem, ARD1522M: 15mm tube x 22mm stem, ATEU1010M: 10mm tube x 10mm stem, ATEU1515M: 15mm tube x 15mm tube, SATEU6766B: 15mm tube x 15mm tube (Long), ATEU2222M: 22mm tube x 22mm tube, AFA1004M: 10mm x ¼” BSPT, AFA1507M: 15mm x ½” BSPT, AFA1509M: 15mm x ¾” BSPT, AFA2209M: 22mm x ¾” BSPT, AFAUN101/2VM: 10mm x 1/2-16 UN, AMRS1004M: 10mm tube x ¼” BSPT, AMRS1006M: 10mm tube x ⅜” BSPT, AMRS1007M: 10mm tube x ½” BSPT, AMTS1004M: 10mm tube x ¼” BSPT, AMTS1006M: 10mm tube x ⅜” BSPT, AMTS1007M: 10mm tube x ½” BSPT, ASA1004M: 10mm stem x ¼” BSPT, ASA1006M: 10mm stem x ⅜” BSPT, ASA1007M: 10mm stem x ½” BSPT, ACR1010M: 10mm tube, ATU101010M: 10mm tube, ATU151010M: 15mm run x 10mm run x 10mm branch, ATU151510M: 15mm run x 15mm run x 10mm branch, ATU151515M: 15mm tube, ATU151522M: 15mm run x 15mm run x 22mm branch, ATU221515M: 22mm run x 15mm run x 15mm branch, ATU222210M: 22mm run x 22mm run x 10mm branch, ATU222215M: 22mm run x 22mm run x 15mm branch, ATU221522M: 22mm run x 15mm run x 22mm branch, ATU222222M: 22mm tube, AUB1010M: 10mm tube, AUB1515M: 15mm tube, AUB2222M: 22mm tube, AUC1010M: 10mm tube x 10mm tube, AUC1510M: 15mm tube x 10mm tube, AUC1515M: 15mm tube x 15mm tube, AUC2215M: 22mm tube x 15mm tube, AUC2222M: 22mm tube x 22mm tube, ATWD1010M: 10mm in & out, ATWD1515M: 15mm in & out, ATES10M: 10mm tube, ATES15M: 15mm tube, ATES22M: 22mm tube, APL10M: 10mm plug, APL15M: 15mm plug, APL22M: 22mm plug, AEL1510M: 10mm stem - 15mm tube, AEL2215M: 15mm stem - 22mm tube, ABU1010M: 10mm tube x 10mm tube, ABBC1507M: 15mm tube x ½" barb, ABBC2207M: 22mm tube x ½" barb, ABBC2209M: 22mm tube x ¾" barb, ABBC1510M: 15mm tube x 10mm barb, ABBC15M09: 15mm tube x 9mm barb, ABBC15M10: 15mm tube x 10mm barb, ABBC15M13: 15mm tube x 13mm barb, AEL15M07: ½" stem x 15mm tube, ASSA15M06: 15mm stem x ⅜" stem, ATBC15M06: 15mm stem x ⅜" barb, ATBC15M07: 15mm stem x ½" barb, ATC15M: 15mm tube, ATC22M: 22mm tube, Grey pipe Inserts: ATS10M: 10mm x 7mm, ATS15M: 15mm x 11.4mm, ATS22M: 22mm x 17.6mm. Models Added July 2020: AMC1002M: 10mm tube x ⅛” BSPT AEU2216M: 22mm tube x 16mm tube ARD1012M: 10mm tube x 12mm stem ARD1518M: 15mm tube x 18mm stem AMCB1004M: 10mm tube x ¼” BSP(P) AMCB1006M: 10mm tube x ⅜” BSP(P) AMCB1007M: 10mm tube x ½” BSP(P) AMCB1507M: 15mm tube x ½” BSP(P) AMCB1509M: 15mm tube x ¾” BSP(P) AMCB2209M: 22mm tube x ¾” BSP(P) AMESB1004M: 10mm tube x ¼” BSP(P) AMESB1006M: 10mm tube x ⅜” BSP(P) AMESB1007M: 10mm tube x ½” BSP(P) ATEU1012M: 10mm tube x 12mm stem AFA1002M: 10mm x 1/8” BSPT AFA2211M: 22mm x 1” BSPT AFAUN121/2VM: 12mm x 1/2-16 UN AFAUF107/16CM: 10mm x 7/16-20UNF-Cone Type AFAU107/16CM: 10mm x 7/16-24 UNS AFAB1006CM: 10mm tube x ⅜” BSP(P) Cone Type AFAB1007CM: 10mm tube x ½” BSP(P) Cone Type AFAB1008CM: 10mm tube x 5/8” BSP(P) Cone Type AFAB1004FM: 10mm tube x ¼” BSP(P) Flat Type AFAB1009FM: 10mm tube x ¾” BSP(P) Flat Type AFAB1209FM: 12mm tube x ¾” BSP(P) Flat Type AFAB1007FM: 10mm tube x ½” BSP(P) Flat Type AFAB1008FM: 10mm tube x 5/8” BSP(P) Flat Type AFAB1009FM: 10mm tube x ¾” BSP(P) Flat Type AFAB1507M: 15mm tube x ½” BSP(P) AFAB1509M: 15mm tube x ¾” BSP(P) AFAB2209M: 22mm tube x ¾” BSP(P) AFAUF107/16VM: 10mm x 7/16-20UNF-V Type AFAUF105/8VM: 10mm x 5/8-18UNF-V Type AMRSB1004M: 10mm tube x ¼” BSP(P) AMRSB1006M: 10mm tube x ⅜” BSP(P) AMRSB1007M: 10mm tube x ½” BSP(P) AMTSB1206M: 12mm tube x ⅜” BSP(P) AMTSB1207M: 12mm tube x ½” BSP(P) AOC1006M: 10mm tube x 6mm tube AMTS1004M: 10mm tube x ¼” BSPT AMTS1006M: 10mm tube x ⅜” BSPT AMTS1007M: 10mm tube x ½” BSPT ASAB1004M: 10mm stem x ¼” BSP(P) ASAB1006M: 10mm stem x ⅜” BSP(P) ASAB1007M: 10mm stem x ½” BSP(P) ASAB1506M: 15mm stem x ⅜” BSP(P) ASAB1507M: 15mm stem x ½" BSP(P) ASAB2207M: 22mm stem x ½" BSP(P) ASAB2209M: 22mm stem x ¾” BSP(P) ACR1212M: 12mm tube ATHWD1210M: 12mm tube x 10mm tube ATU151512M: 15mm run x 15mm run x 12mm branch ATU221616M: 22mm run x 16mm run x 16mm branch ATU222216M: 22mm run x 22mm run x 16mm branch AUC1512M: 15mm tube x 12mm tube AUC2216M: 22mm tube x 16mm tube ATWD1012M: 10mm in & 12mm out AEL1510M: 10mm stem - 15mm tube AEL1610M: 10mm stem - 16mm tube ABU1212M: 12mm tube ABBC1607M: 16mm tube x ½" barb ABBC1201M: 12mm tube x 10mm barb ABBC1610M: 16mm tube x 10mm barb ACM15M06: 15mm x ⅜" x ⅜" manifold APSUC15M07: 15mm power x ½" tube ARD0615M: 15mm stem x ⅜" tube ARD1512M: 15mm stem x 12mm tube AEL16M07: 16mm x ½" tube AEL18M07: ½" stem x 18mm tube ATU15M0606: 15mm tube x ⅜" tube x ⅜" tube ATU1515M06: 15mm tube x 15mm tube x ⅜" tube ATU1616M07: 16mm tube x 16mm tube x ½" tube ATU18M0606: 18mm run x ⅜" run x ⅜" branch AUC12M06: 12mm tube x ⅜" tube AUC15M04: 15mm tube x ¼" tube AUC15M07: 15mm tube x ½" tube ASEU1507M: 15mm tube x 1/2"BSP(P) ASEU1509M: 15mm tube x 3/4"BSP(P) ASUC1507M: 15mm tube x 1/2"BSP(P) ASUC1509M: 15mm tube x 3/4"BSP(P) ASUC2209M: 22mm tube x 3/4"BSP(P) AEFCB1507M: 15mm tube x 1/2"BSP(P) ASFCB1507M: 15mm tube x 1/2"BSP(P) ASFCB1509M: 15mm tube x 3/4"BSP(P) ASFCB2209M: 22mm tube x 3/4"BSP(P)
Factor:
The Fluidconnections Co. (UK) Ltd
Company Name
The Fluidconnections Co. (UK) Ltd
Address
Rufford House, Darwin Drive, Sherwood Energy Village
Postcode
NG22 9GW
Country
New Ollerton,
Phone
+44 (0) 1623 836 814

View All Listings by this Company
Manufacturer:
DMT
Company Name
DMT
Address
143B-3L Namdong-Gu Incheon
Country
Korea

View All Listings by this Company

Print This Approval


#1909015

Range of copper crimped fittings with EPDM ‘O’-rings (except for 149ENM, 303ENM and 304ENM models) for use with copper pipe. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1909015
Expiry date:
30/09/2024
Size:
12mm - 108mm.
Marking:
Zhuji City Howhi Air Conditioners Made Co., Ltd. Logo and size on body.
Installation Requirements:
R001
Model:
100ENM - Copper Press Straight Coupling PxP: 100ENM12AB - 12mm 100ENM15AB - 15mm 100ENM18AB - 18mm 100ENM22AB - 22mm 100ENM28AB - 28mm 100ENM35AB - 35mm 100ENM42AB - 42mm 100ENM54AB - 54mm 100ENM67AB - 66.7mm 100ENM76AB - 76.1mm 100ENM89AB - 88.9mm 100ENM108AB - 108mm 101ENM - Copper Press Reducing Coupling PxP: 101ENM1512AB - 15mm×12mm 101ENM1514AB - 15mm×14mm 101ENM1615AB - 16mm×15mm 101ENM1812AB - 18mm×12mm 101ENM1815AB - 18mm×15mm 101ENM1817AB - 18mm×17mm 101ENM2215AB - 22mm×15mm 101ENM2218AB - 22mm×18mm 101ENM2815AB - 28mm×15mm 101ENM2818AB - 28mm×18mm 101ENM2822AB - 28mm×22mm 101ENM3522AB - 35mm×22mm 101ENM3528AB - 35mm×28mm 101ENM4222AB - 42mm×22mm 101ENM4228AB - 42mm×28mm 101ENM4235AB - 42mm×35mm 101ENM5428AB - 54mm×28mm 101ENM5435AB - 54mm×35mm 101ENM5442AB - 54mm×42mm 102ENM - Copper Press Fitting Reducer FTGxP: 102ENM1512AB - 15mm×12mm 102ENM1812AB - 18mm×12 mm 102ENM1815AB - 18mm×15mm 102ENM2215AB - 22mm×15mm 102ENM2218AB - 22mm×18mm 102ENM2815AB - 28mm×15mm 102ENM2818AB - 28mm×18mm 102ENM2822AB - 28mm×22mm 102ENM3522AB - 35mm×22 mm 102ENM3528AB - 35mm×28 mm 102ENM4222AB - 42mm×22mm 102ENM4228AB - 42mm×28mm 102ENM4235AB - 42mm×35mm 102ENM5428AB - 54mm×28mm 102ENM5435AB - 54mm×35mm 102ENM5442AB - 54mm×42mm 102ENM6728AB - 66.7mm×28mm 102ENM6735AB - 66.7mm×35mm 102ENM6742AB - 66.7mm×42mm 102ENM6754AB - 66.7mm×54mm 102ENM7635AB - 76.1mm×35mm 102ENM7642AB - 76.1mm×42mm 102ENM7654AB - 76.1mm×54mm 102ENM7667AB - 76.1mm×66.7mm 102ENM8954AB - 88.9mm×54mm 102ENM8976AB - 88.9mm×76.1mm 102ENM10842AB - 108mm×42mm 102ENM10854AB - 108mm×54mm 102ENM10867AB - 108mm×66.7mm 102ENM10876AB - 108mm×76.1mm 102ENM10889AB - 108mm×88.9mm 103ENM - Copper Press Elbow - 90°PxP: 103ENM12AB - 12mm 103ENM15AB - 15mm 103ENM18AB - 18mm 103ENM22AB - 22mm 103ENM28AB - 28mm 103ENM35AB - 35mm 103ENM42AB - 42mm 103ENM54AB - 54mm 103ENM67AB - 66.7mm 103ENM76AB - 76.1mm 103ENM89AB - 88.9mm 103ENM108AB - 108mm 104ENM - Copper Press Elbow - 90°(Male / Female) FTGxP: 104ENM12AB - 12mm 104ENM15AB - 15mm 104ENM18AB - 18mm 104ENM22AB - 22mm 104ENM28AB - 28mm 104ENM35AB - 35mm 104ENM42AB - 42mm 104ENM54AB - 54mm 104ENM67AB - 66.7mm 104ENM76AB - 76.1mm 104ENM89AB - 88.9mm 104ENM108AB - 108mm 107ENM - Copper Press Elbow - 45°PxP: 107ENM12AB - 12mm 107ENM15AB - 15mm 107ENM18AB - 18mm 107ENM22AB - 22mm 107ENM28AB - 28mm 107ENM35AB - 35mm 107ENM42AB - 42mm 107ENM54AB - 54mm 107ENM67AB - 66.7mm 107ENM76AB - 76.1mm 107ENM89AB - 88.9mm 107ENM108AB - 108mm 108ENM - Copper Press Elbow - 45°(Male / Female) FTGxP: 108ENM12AB - 12mm 108ENM15AB - 15mm 108ENM18AB - 18mm 108ENM22AB - 22mm 108ENM28AB - 28mm 108ENM35AB - 35mm 108ENM42AB - 42mm 108ENM54AB - 54mm 108ENM67AB - 66.7mm 108ENM76AB - 76.1mm 108ENM89AB - 88.9mm 108ENM108AB - 108mm 111ENM - Copper Press Slip Extended Coupling PxP: 111ENM12AL - 12mm 111ENM15AL - 15mm 111ENM18AL - 18mm 111ENM22AL - 22mm 111ENM28AL - 28mm 111ENM35AL - 35mm 111ENM42AL - 42mm 111ENM54AL - 54mm 111ENM67AL - 66.7mm 111ENM76AL - 76.1mm 111ENM89AL - 88.9mm 111ENM108AL - 108mm 112ENM - Copper Press Equal Tee PxPxP: 112ENM12AB - 12mm 112ENM15AB - 15mm 112ENM18AB - 18mm 112ENM22AB - 22mm 112ENM28AB - 28mm 112ENM35AB - 35mm 112ENM42AB - 42mm 112ENM54AB - 54mm 112ENM67AB - 66.7mm 112ENM76AB - 76.1mm 112ENM89AB - 88.9mm 112ENM108AB - 108mm 113ENM - Copper Press Unequal Tee PxPxP: 113ENM151512AB - 15mm×15mm×12mm 113ENM181812AB - 18mm×18mm×12mm 113ENM181815AB - 18mm×18mm×15mm 113ENM222212AB - 22mm×22mm×12mm 113ENM222215AB - 22mm×22mm×15mm 113ENM222218AB - 22mm×22mm×18mm 113ENM282815AB - 28mm×28mm×15mm 113ENM282818AB - 28mm×28mm×18mm 113ENM282822AB - 28mm×28mm×22mm 113ENM353515AB - 35mm×35mm×15mm 113ENM353522AB - 35mm×35mm×22mm 113ENM353528AB - 35mm×35mm×28mm 113ENM424215AB - 42mm×42mm×15mm 113ENM424222AB - 42mm×42mm×22mm 113ENM424228AB - 42mm×42mm×28mm 113ENM424235AB - 42mm×42mm×35mm 113ENM545415AB - 54mm×54mm×15mm 113ENM545422AB - 54mm×54mm×22mm 113ENM545428AB - 54mm×54mm×28mm 113ENM545435AB - 54mm×54mm×35mm 113ENM545442AB - 54mm×54mm×42mm 113ENM676728AB - 66.7mm×66.7mm×28mm 113ENM676735AB - 66.7mm×66.7mm×35mm 113ENM676742AB - 66.7mm×66.7mm×42mm 113ENM676754AB - 66.7mm×66.7mm×54mm 113ENM767622AB - 76.1mm×76.1mm×22mm 113ENM767628AB - 76.1mm×76.1mm×28mm 113ENM767635AB - 76.1mm×76.1mm×35mm 113ENM767642AB - 76.1mm×76.1mm×42mm 113ENM767654AB - 76.1mm×76.1mm×54mm 113ENM767667AB - 76.1mm×76.1mm×66.7mm 113ENM898954AB - 88.9mm×88.9mm×54mm 113ENM898976AB - 88.9mm×88.9mm×76.1mm 113ENM10810854AB - 108mm×108mm×54mm 113ENM10810867AB - 108mm×108mm×66.7mm 113ENM10810876AB - 108mm×108mm×76.1mm 113ENM10810889AB - 108mm×108mm×89mm 114ENM151212AB - 15mm×12mm×12mm 114ENM151215AB - 15mm×12mm×15mm 114ENM181515AB - 18mm×15mm×15mm 114ENM181518AB - 18mm×15mm×18mm 114ENM221515AB - 22mm×15mm×15mm 114ENM221518AB - 22mm×15mm×18mm 114ENM221522AB - 22mm×15mm×22mm 114ENM221818AB - 22mm×18mm×18mm 114ENM221822AB - 22mm×18mm×22mm 114ENM281528AB - 28mm×15mm×28mm 114ENM282215AB - 28mm×22mm×15mm 114ENM282222AB - 28mm×22mm×22mm 114ENM282228AB - 28mm×22mm×28mm 114ENM352822AB - 35mm×28mm×22mm 114ENM352828AB - 35mm×28mm×28mm 114ENM423542AB - 42mm×35mm×42mm 114ENM542854AB - 54mm×28mm×54mm 115ENM - Copper Press Unequal Tee PxPxP: 115ENM151522AB - 15mm×15mm×22mm 121ENM - Copper Press Reducing Elbow - 90°PxP: 121ENM2215AB - 22mm×15mm 137ENM - Copper Press End Cap P: 137ENM12AB - 12mm 137ENM15AB - 15mm 137ENM18AB - 18mm 137ENM22AB - 22mm 137ENM28AB - 28mm 137ENM35AB - 35mm 137ENM42AB - 42mm 137ENM54AB - 54mm 137ENM67AB - 66.7mm 137ENM76AB - 76.1mm 137ENM89AB - 88.9mm 137ENM108AB - 108mm 138ENM - Copper Press Full crossover P x P: 138ENM15AB - 15mm 138ENM18AB - 18mm 138ENM22AB - 22mm 148ENM - Copper Press Partial crossover FTGxP: 148ENM12AB - 12mm 148ENM15AB - 15mm 148ENM18AB - 18mm 148ENM22AB - 22mm 149ENM - Copper Press Street crossover FTGxFTG: 149ENM15AB - 15mm 149ENM18AB - 18mm 149ENM22AB - 22mm 301ENM - Copper Press Adapter - male thread P x R: 301ENM1210AB - 12mm×3/8" 301ENM1213AB - 12mm×1/2" 301ENM1510AB - 15mm×3/8" 301ENM1513AB - 15mm×1/2" 301ENM1519AB - 15mm×3/4" 301ENM1813AB - 18mm×1/2" 301ENM1819AB - 18mm×3/4" 301ENM2213AB - 22mm×1/2" 301ENM2219AB - 22mm×3/4" 301ENM2225AB - 22mm×1" 301ENM2819AB - 28mm×3/4" 301ENM2825AB - 28mm×1" 301ENM2832AB - 28mm×1-1/4" 301ENM3525AB - 35mm×1" 301ENM3532AB - 35mm×1-1/4" 301ENM4232AB - 42mm×1-1/4" 301ENM4238AB - 42mm×1-1/2" 301ENM5451AB - 54mm×2" 301ENM6764AB - 66.7mm×2-1/2" 301ENM7664AB - 76.1mm×2-1/2" 301ENM7676AB - 76.1mm×3" 301ENM8976AB - 88.9mm×3" 301ENM108102AB - 108mm×4" 302ENM - Copper Press Adapter - Female thread P x Rp: 302ENM1210AB - 12mm×3/8" 302ENM1213AB - 12mm×1/2" 302ENM1510AB - 15mm×3/8" 302ENM1513AB - 15mm×1/2" 302ENM1519AB - 15mm×3/4" 302ENM1819AB - 18mm×3/4" 302ENM2213AB - 22mm×1/2" 302ENM2219AB - 22mm×3/4" 302ENM2225AB - 22mm×1" 302ENM2819AB - 28mm×3/4" 302ENM2825AB - 28mm×1" 302ENM3532AB - 35mm×1-1/4" 302ENM4238AB - 42mm×1-1/2" 302ENM5451AB - 54mm×2" 302ENM6764AB - 66.7mm×2-1/2" 302ENM7664AB - 76.1mm×2-1/2" 302ENM7676AB - 76.1mm×3" 302ENM8976AB - 88.9mm×3" 302ENM108102AB - 108mm×4" 303ENM - Copper Press Adapter - male thread FTG x R: 303ENM1513AB - 15mm×1/2" 303ENM2213AB - 22mm×1/2" 303ENM2219AB - 22mm×3/4" 304ENM - Copper Press Adapter - Female thread FTG x Rp: 304ENM1513AB - 15mm×1/2" 304ENM2213AB - 22mm×1/2" 304ENM2219AB - 22mm×3/4" 304ENM3525AB - 35mm×1" 304ENM5451AB - 54mm×2" 313ENM - Copper Press Adapter Tee - female thread on branch P x P x Rp: 313ENM121213AB - 12mm×12mm×1/2" 313ENM151513AB - 15mm×15mm×1/2" 313ENM181813AB - 18mm×18mm×1/2" 313ENM222213AB - 22mm×22mm×1/2" 313ENM222219AB - 22mm×22mm×3/4" 313ENM282813AB - 28mm×28mm×1/2" 313ENM282819AB - 28mm×28mm×3/4" 313ENM353513AB - 35mm×35mm×1/2" 313ENM424213AB - 42mm×42mm×1/2" 313ENM545413AB - 54mm×54mm×1/2" 314ENM - Copper Press Adapter 90° Elbow - male thread P x R: 314ENM1513AB - 15mm×1/2" 314ENM1813AB - 18mm×1/2" 314ENM2219AB - 22mm×3/4" 314ENM2825AB - 28mm×1" 315ENM1513AB - 15mm×1/2" 315ENM1813AB - 18mm×1/2" 315ENM2219AB - 22mm×3/4" 315ENM2825AB - 28mm×1"
Manufacturer:
Zhuji City Howhi Air Conditioners Made Co Ltd
Company Name
Zhuji City Howhi Air Conditioners Made Co Ltd
Address
Donggong Village, Yangmeiqiao Community, Diankou Diankou Town, Zhuji City, Shaoxing City, Zhejiang Province, China

View All Listings by this Company

Print This Approval


#1909382

Range of push-fit fittings with polypropylene bodies and NBR seals for use with copper, BS7291 polybutylene and PEX pipe. Cold water use only. Maximum working pressure 16.0 bar.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1909382
Expiry date:
30/09/2024
Note:
Above ground use only
Size:
See Model
Marking:
Plasson and size on body
Installation Requirements:
R001
Model:
1001CU - Copper coupler: 20mm x 15mm - 32mm x 28mm. 1001M - Metric/imperial coupler: 20mm x ½” - 32mm x 1”. 1001U - Coupling: 20mm x 20mm - 63mm x 63mm. 1002C - Copper pipe male adaptor: - 15mm x ¾” - 28mm x 1”. 1002G - Male meter adaptor: 15mm - ¾”. 1002U - Male adaptor: 20mm x ½” - 63mm x 2”. 1003C - Female copper adaptor: 15mm x ¾” - 22mm x ¾”. 1003U - Male adaptor: 20mm x ½” - 63mm x 2”. 1004U - Tee: 20mm x 20mm x 20mm - 63mm x 63mm x 63mm. 1005M - Metric/Imperial elbow: 25mm x ½” - 25mm x ¾”. 1005U - Elbow: 20mm x 20mm - 63mm x 63mm. 1011U - Reducing coupler: 25mm x 20mm - 63mm x 50mm. 1012 - End plug: 20mm - 32mm. 1012U - End plug: 40mm - 63mm. 1014U - Female tee: 25mm x ¾” x 25mm - 32mm x 1” x 32mm. 1015U - Female elbow: 20mm x ½” - 32mm x 1”. 1034U - Reducing tee: 25mm x 20mm x 25mm - 32mm x 25mm x 32mm. 1051U - Reducing elbow 25mm x 20mm. 1075U - Wall plate elbow: 20mm x ½” - 25mm x ¾”. 1085U - Male elbow: 20mm x ½” - 63mm x 2”. 8
Factor:
Plasson UK Ltd
Company Name
Plasson UK Ltd
Address
Plasson House 27 Albert Drive Burgess Hill
Postcode
RH15 9TN
Country
West Sussex
Phone
+44 (0) 1444 244 446
General Email
sales@plasson.co.uk

View All Listings by this Company

Print This Approval


#1904077

Range of brass Pushtite fittings incorporating EDPM O-rings. For use with Irish copper pipe Maximum working pressure 16.0 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1904077
Expiry date:
30/04/2024
Marking:
EXCEL IND & SIZE ON COLLAR/BODY
Installation Requirements:
R001
Model:
PUSHTITE ELBOW: PT1512, PT1534. PUSHTITE STOP END: PT5112, PT5134. PUSHTITE STRAIGHT COUPLING: PT1012, PT1034. PUSHTITE REDUCER x Pipe: PT483412. PUSHTITE EQUAL TEE: PT1812, PT1834. PUSHTITE REDUCING TEE: PT183412, PT18341234 & PT18341212.
Factor:
Excel Industries Ltd
Company Name
Excel Industries Ltd
Address
Coolmine Industrial Estate Clonsilla Road Dublin 15
Postcode
D15N704
Country
Ireland
Phone
+35 31811 8701
General Email
stephen.hope@excel-industries.com

View All Listings by this Company

Print This Approval


#1912019

Fluidfit range of black, grey and white push-fit fittings with plastic bodies, incorporating EPDM ‘O’ rings. For use with LLDPE tube (manufactured to DIN 8072). Maximum working pressures: 4 - 8mm & 5/32” - 5/16” models = 16.0 bar. 10 – 12mm & ⅜” – ½” = 10.0 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1912019
Expiry date:
31/12/2024
Note:
R008 applies to the white fittings only
Size:
4mm, 5mm, 6mm, 8mm, 10mm & 12mm. 5/32”, 3/16”, 1/4”, 5/16”, 3/8” & ½”.
Marking:
CDC & size on collet
Installation Requirements:
R001 R008
Model:
Fluidfit range
Manufacturer:
CDC Pneumatics Corp.
Company Name
CDC Pneumatics Corp.
Address
30, 1-Gil, Secheon-no, Dasa-eup, Dalseong-gun, Daegu (Saecheon-ri) 42921
Country
South Korea
Phone
+82 533547501

View All Listings by this Company

Print This Approval


#1912026

Archung series, ‘N.U’ range of S30408 & S31603 stainless steel crimp fit fittings with EPDM ‘O’-rings, for use with stainless steel pipe manufactured to EN10312. Joints are achieved by the use of a press fitting tool. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1912026
Expiry date:
31/12/2024
Size:
Crimp and flange connections: 18mm - 108mm. BSP connections: ½” - 2”.
Marking:
N.U. (trademark of Shenzhen Archung Technology Co., Ltd.), size and material type on fitting body.
Installation Requirements:
R001
Model:
Archung series - “N.U” range (S304/S316L08 s/steel fittings end in S304/S316L, S31603 fittings end in S316L): Straight coupling: N.U00S018S304/S316L/S316L: 18mm, N.U00S022S304/S316L: 22mm, N.U00S028S304/S316L: 28mm, N.U00S035S304/S316L: 35mm, N.U00S042S304/S316L: 42mm, N.U00S054S304/S316L: 54mm, N.U00S076S304/S316L: 76.1mm, N.U00S089S304/S316L: 88.9mm, N.U00S108S304/S316L: 108mm. Reducing coupling: N.U0SR2218S304/S316L: 22x18mm, N.U0SR2822S304/S316L: 28x22mm, N.U0SR3528S304/S316L: 35x28mm, N.U0SR4235S304/S316L: 42X35mm, N.U0SR5442S304/S316L: 54X42mm, N.U0SR7654S304/S316L: 76.1X54mm, N.U0SR8954S304/S316L: 88.9X54mm, N.U0SR8976S304/S316L: 88.9X76.1mm, N.U0SR10876S304/S316L: 108X76.1mm, N.U0SR10889S304/S316L: 108X88.9mm. Female thread Straight coupling: N.U0SF18050S304/S316L: 18mmX1/2” BSP (F), N.U0SF22075S304/S316L: 22mmX3/4” BSP (F), N.U0SF28100S304/S316L: 28mmX1” BSP (F), N.U0SF35125S304/S316L: 35mmX11/4” BSP (F), N.U0SF42150S304/S316L: 42mmX11/2” BSP (F), N.U0SF54200S304/S316L: 54mmX2” BSP (F). Female thread Reducing Straight coupling: N.USRF22050S304/S316L: 22mmX1/2” BSP (F), N.USRF28075S304/S316L: 28mmX3/4” BSP (F), N.USRF35100S304/S316L: 35mmX1” BSP (F), N.USRF42125S304/S316L: 42mmX11/4” BSP (F), N.USRF54150S304/S316L: 54mmX11/2” BSP (F). Male thread Straight coupling A: N.U0SM18050S304/S316L: 18mmX1/2” BSP (M), N.U0SM22075S304/S316L: 22mmX3/4” BSP (M), N.U0SM28100S304/S316L: 28mmX1” BSP (M). Male thread Reducing coupling A: N.USRM22050S304/S316L: 22mmX1/2” BSP (M), N.USRM28075S304/S316L: 28mmX3/4” BSP (M). Male thread Straight coupling B: N.U0SM35125S304/S316L: 35mmX11/4” BSP (M), N.U0SM42150S304/S316L: 42mmX11/2” BSP (M), N.U0SM54200S304/S316L: 54mmX2” BSP (M). Male thread Reducing coupling B: N.USRM42125S304/S316L: 42mmX11/4” BSP (M), N.USRM54150S304/S316L: 54mmX11/2” BSP (M). Flange coupling: N.U0SL018S304/S316L: 18mm, N.U0SL022S304/S316L: 22mm, N.U0SL028S304/S316L: 28mm, N.U0SL035S304/S316L: 35mm, N.U0SL042S304/S316L: 42mm, N.U0SL054S304/S316L: 54mm, N.U0SL076S304/S316L: 76.1mm, N.U0SL089S304/S316L: 88.9mm, N.U0SL108S304/S316L: 108mm. 90° Elbow: N.U90E018S304/S316L: 18mm, N.U90E022S304/S316L: 22mm, N.U90E028S304/S316L: 28mm, N.U90E035S304/S316L: 35mm, N.U90E042S304/S316L: 42mm, N.U90E054S304/S316L: 54mm, N.U90E076S304/S316L: 76.1mm, N.U90E089S304/S316L: 88.9mm, N.U90E108S304/S316L: 108mm. 90° ER reducing Elbow: N.U90ER2218S304/S316L: 22X18mm, N.U90ER2822S304/S316L: 28X22mm, N.U90ER3528S304/S316L: 35X28mm, N.U90ER4235S304/S316L: 42X35mm, N.U90ER5442S304/S316L: 54X42mm. 90° ED One-way Elbow: N.U90ED018S304/S316L: 18mm, N.U90ED022S304/S316L: 22mm, N.U90ED028S304/S316L: 28mm, N.U90ED035S304/S316L: 35mm, N.U90ED042S304/S316L: 42mm, N.U90ED054S304/S316L: 54mm. 90° EFZ Female thread short Elbow: N.U90EFZ18050S304/S316L: 18mmX1/2” BSP (F), N.U90EFZ22075S304/S316L: 22mmX3/4” BSP (F), N.U90EFZ28100S304/S316L: 28mmX1” BSP (F). ERFZ Female thread short reducing Elbow: N.U90ERFZ22050S304/S316L: 22mmX1/2” BSP (F), N.U90ERFZ28075S304/S316L: 28mmX3/4” BSP (F). 90° EF Female thread Elbow: N.U90EF18050S304/S316L: 18mmX1/2” BSP (F), N.U90EF22075S304/S316L: 22mmX3/4” BSP (F), N.U90EF28100S304/S316L: 28mmX1” BSP (F), N.U90EF35125S304/S316L: 35mmX11/4” BSP (F), N.U90EF42150S304/S316L: 42mmX11/2” BSP (F), N.U90EF54200S304/S316L: 54mmX2” BSP (F). 90° ERF Female thread reducing Elbow: N.U90ERF22050S304/S316L: 22mmX1/2” BSP (F), N.U90ERF28075S304/S316L: 28mmX3/4” BSP (F), N.U90ERF35100S304/S316L: 35mmX1” BSP (F), N.U90ERF42125S304/S316L: 42mmX11/4” BSP (F), N.U90ERF54150S304/S316L: 54mmX11/2” BSP (F). 90° EM Male thread Elbow: N.U90EM18050S304/S316L: 18mmX1/2” BSP (M), N.U90EM22075S304/S316L: 22mmX3/4” BSP (M), N.U90EM28100S304/S316L: 28mmX1” BSP (M), N.U90EM35125S304/S316L: 35mmX11/4” BSP (M), N.U90EM42150S304/S316L: 42mmX11/2” BSP (M), N.U90EM54200S304/S316L: 54mmX2” BSP (M). 90° ERM Male thread reducing Elbow: N.U90ERM22050S304/S316L: 22mmX1/2” BSP (M), N.U90ERM28075S304/S316L: 28mmX3/4” BSP (M), N.U90ERM35100S304/S316L: 35mmX1” BSP (M), N.U90ERM42125S304/S316L: 42mmX11/4” BSP (M), N.U90ERM54150S304/S316L: 54mmX11/2” BSP (M). 45° Elbow: N.U45E018S304/S316L: 18mm, N.U45E022S304/S316L: 22mm, N.U45E028S304/S316L: 28mm, N.U45E035S304/S316L: 35mm, N.U45E042S304/S316L: 42mm, N.U45E054S304/S316L: 54mm, N.U45E076S304/S316L: 76.1mm, N.U45E089S304/S316L: 88.9mm, N.U45E108S304/S316L: 108mm. 45° ED one-way Elbow: N.U45ED018S304/S316L: 18mm, N.U45ED022S304/S316L: 22mm, N.U45ED028S304/S316L: 28mm, N.U45ED035S304/S316L: 35mm, N.U45ED042S304/S316L: 42mm, N.U45ED054S304/S316L: 54mm. Equal tee: N.U03T018S304/S316L: 18mm, N.U03T022S304/S316L: 22mm, N.U03T028S304/S316L: 28mm, N.U03T035S304/S316L: 35mm, N.U03T042S304/S316L: 42mm, N.U03T054S304/S316L: 54mm, N.U03T076S304/S316L: 76.1mm, N.U03T089S304/S316L: 88.9mm, N.U03T108S304/S316L: 108mm. Reducing tee: N.U3TR2218S304/S316L: 22X18mm, N.U3TR2818S304/S316L: 28X18mm, N.U3TR2822S304/S316L: 28X22mm, N.U3TR3528S304/S316L: 35X28mm, N.U3TR4235S304/S316L: 42X35mm, N.U3TR5442S304/S316L: 54X42mm, N.U3TR7654S304/S316L: 76.1X54mm, N.U3TR8954S304/S316L: 88.9X54mm, N.U3TR8976S304/S316L: 88.9X76.1mm, N.U3TR10876S304/S316L: 108X76.1mm, N.U3TR10889S304/S316L: 108X88.9mm. Female thread Tee: N.U3TF18050S304/S316L: 18mmX1/2” BSP (F), N.U3TF22075S304/S316L: 22mmX3/4” BSP (F), N.U3TF28100S304/S316L: 28mmX1” BSP (F), N.U3TF35125S304/S316L: 35mmX11/4” BSP (F), N.U3TF42150S304/S316L: 42mmX11/2” BSP (F), N.U3TF54200S304/S316L: 54mmX2” BSP (F). Female thread reducing Tee: N.U3TRF22050S304/S316L: 22mmX1/2” BSP (F), N.U3TRF28075S304/S316L: 28mmX3/4” BSP (F), N.U3TRF35100S304/S316L: 35mmX1” BSP (F), N.U3TRF42125S304/S316L: 42mmX11/4” BSP (F), N.U3TRF54150S304/S316L: 54mmX11/2” BSP (F). Male thread Tee: N.U3TM18050S304/S316L: 18mmX1/2” BSP (M), N.U3TM22075S304/S316L: 22mmX3/4” BSP (M), N.U3TM28100S304/S316L: 28mmX1” BSP (M), N.U3TM35125S304/S316L: 35mmX11/4” BSP (M), N.U3TM42150S304/S316L: 42mmX11/2” BSP (M), N.U3TM54200S304/S316L: 54mmX2” BSP (M). Male thread reducing Tee: N.U3TRM22050S304/S316L: 22mmX1/2” BSP (M), N.U3TRM28075S304/S316L: 28mmX3/4” BSP (M), N.U3TRM35100S304/S316L: 35mmX1” BSP (M), N.U3TRM42125S304/S316L: 42mmX11/4” BSP (M), N.U3TRM54150S304/S316L: 54mmX11/2” BSP (M). Adjustable straight: N.U0SK018S304/S316L: 18mm, N.U0SK022S304/S316L: 22mm, N.U0SK028S304/S316L: 28mm, N.U0SK035S304/S316L: 35mm, N.U0SK042S304/S316L: 42mm, N.U0SK054S304/S316L: 54mm, N.U0SK076S304/S316L: 76.1mm, N.U0SK089S304/S316L: 88.9mm, N.U0SK108S304/S316L: 108mm. Hex adaptor: N.U0SD050S304/S316L: 1/2” BSP (F)X1/2” BSP (M), N.U0SD075S304/S316L: 3/4” BSP (F)X3/4” BSP (M), N.U0SD100S304/S316L: 1” BSP (F)X1” BSP (M), N.U0SD125S304/S316L: 11/4” BSP (F)X11/4” BSP (M), N.U0SD150S304/S316L: 11/2” BSP (F)X11/2” BSP (M), N.U0SD200S304/S316L: 2” BSP (F)X2” BSP (M). Short adaptor: N.U0FM075050S304/S316L: 3/4” BSP (M)X1/2” BSP (F), N.U0FM100050S304/S316L: 1” BSP (M)X1/2” BSP (F), N.U0FM100075S304/S316L: 1” BSP (M)X3/4” BSP (F), N.U0FM125100S304/S316L: 11/4” BSP (M)X1” BSP (F), N.U0FM150125S304/S316L: 11/2” BSP (M)X11/4” BSP (F), N.U0FM200150S304/S316L: 2” BSP (M)X11/2 BSP (F). Bridge: N.U00Q018S304/S316L: 18mm, N.U00Q022S304/S316L: 22mm, N.U00Q028S304/S316L: 28mm. Cap: N.U00C018S304/S316L: 18mm, N.U00C022S304/S316L: 22mm, N.U00C028S304/S316L: 28mm, N.U00C035S304/S316L: 35mm, N.U00C042S304/S316L: 42mm, N.U00C054S304/S316L: 54mm.
Manufacturer:
Shenzhen Archung Technology Co. Ltd.
Company Name
Shenzhen Archung Technology Co. Ltd.
Address
A1401 Happy City Commercial Building HePing East Road QingHua Community
Country
Longhua District

View All Listings by this Company

Print This Approval


#1912034

Range of Victaulic clamps with EPDM rubber gaskets and 90º plastic fittings assemblies. Products in ‘Style 905’ are for use with plain end HDPE pipe and products in ‘Style 907’ are for use with HDPE and steel pipe. Maximum working pressure: SDR 17 (10.0 bar). SDR 11 (16.0 bar). SDR 7.4 (25.0 bar). Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1912034
Expiry date:
31/12/2024
Size:
see mdoel
Marking:
Victaulic, size and other product info on collet fittings. Victaulic, size, model code and date of manufacture (YY/MM) on 90º Fitting. Models added April 2021: Victaulic, size, model code and date of manufacture (clock format) on fitting body.
Installation Requirements:
R001
Model:
Style 905 Coupling for Plain End HDPE Pipe - sizes 63, 75, 90, 110, 125, 140, 160, 180, 200, 225mm Style 907 Transition Coupling for HDPE to Steel Pipe - sizes 63, 75, 90, 110, 125, 140, 160, 180, 200, 225mm HDPE Plain End Fittings: No. H10, 90° Elbow - 63, 75, 90, 110, 125, 140, 160, 180, 200 & 225mm; Pressure ratings SDR 7.4(PN25), SDR 11(PN16), & SDR17(PN10) No. H11, 45° Elbow - 63, 75, 90, 110, 125, 140, 160, 180, 200 & 225mm; Pressure ratings SDR 7.4(PN25), SDR 11(PN16), & SDR17(PN10) No. H20, Tee Straight - 63, 75, 90, 110, 125, 140, 160, 180, 200 & 225mm; Pressure ratings SDR 7.4(PN25), SDR 11(PN16), & SDR17(PN10) No. H50, Concentric Reducer - 90x63mm, 110x63mm, 110x90mm, 160x90mm & 160x110mm; Pressure ratings SDR 7.4(PN25), SDR 11(PN16), & SDR17(PN10) Models added April 2021: Style 905 Coupling for Plain End HDPE Pipe -sizes 250mm, 280mm, 315mm: Style 907 Transition Coupling for HDPE to Steel Pipe - sizes 250mm, 280mm: Pressure ratings: SDR 7.4 (PN25), SDR 11 (PN16), & SDR 17 (PN10)
Factor:
Victaulic Europe BVBA
Company Name
Victaulic Europe BVBA
Address
Prijkelstraat 36, B-9810 Nazareth
Country
Belgium

View All Listings by this Company

Print This Approval


#1911305

Range of fittings for use with pressure gauges, having nickel plated brass bodies and EPDM ‘o’ rings where applicable. Maximum working pressure: Kee Push fit – 10.0 bar, Kee 050 plug, Kee T Piece, Kee 050 coupler – 35.0 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1911305
Expiry date:
30/11/2024
Note:
IRN R008 applies to Kee Push fit ¼” BSPP.
Size:
See model.
Marking:
Kee Push fit – Kee-PF on body Kee 050 plug – Kee-P on body Kee T Piece – Kee T on body Kee 050 coupler – Kee-050 series on body
Installation Requirements:
R001 R008
Model:
Kee Push fit: ¼” BSPP x 6mm tube (for use with John Guest blue LLDPE pipe) Kee 050 plug: ¼” BSPP x 9mm plug OD Kee T Piece: 3/8” x 3/8” x 3/8” Kee 050 coupler: ¼” BSPP x 9mm coupler OD
Manufacturer:
Kee Connections LTD
Company Name
Kee Connections LTD
Address
Unit A1 Villiers Court Villiers Road Knowsley Business Park
Postcode
L34 9ET
Country
Prescot

View All Listings by this Company

Print This Approval


#2005036

Range of press-fit fittings with brass bodies and EPDM `O`-rings for use with copper pipe manufactured in accordance with EN1057. Maximum working pressure 16.0 bar (sizes 12mm to 34mm). Maximum working pressure 10.0 bar (sizes 35mm to 54mm). Maximum operating temperature 90°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2005036
Expiry date:
31/05/2025
Marking:
DBW, CR and size on body
Installation Requirements:
R001
Model:
S6243 (15mm press-fit x 1/2” BSP (M)) S6243 (15mm press-fit x 3/4” BSP (M)) S6243 (18mm press-fit x 1/2” BSP (M)) S6243 (18mm press-fit x 3/4” BSP (M)) S6243 (22mm press-fit x 1/2” BSP (M)) S6243 (22mm press-fit x 3/4” BSP (M)) S6243 (22mm press-fit x 1” BSP (M)) S6243 (28mm press-fit x 3/4” BSP (M)) S6243 (28mm press-fit x 1” BSP (M)) S6243 (35mm press-fit x 1” BSP (M)) S6243 (35mm press-fit x 1.1/4” BSP (M)) S6243 (42mm press-fit x 1.1/2” BSP (M)) S6243 (54mm press-fit x 2” BSP (M)) S6270 (15mm press-fit x 1/2” BSP (F)) S6270 (15mm press-fit x 3/4” BSP (F)) S6270 (18mm press-fit x 1/2” BSP (F)) S6270 (18mm press-fit x 3/4” BSP (F)) S6270 (22mm press-fit x 1/2” BSP (F)) S6270 (22mm press-fit x 3/4” BSP (F)) S6270 (22mm press-fit x 1” BSP (F)) S6270 (28mm press-fit x 3/4” BSP (F)) S6270 (28mm press-fit x 1” BSP (F)) S6270 (35mm press-fit x 1” BSP (F)) S6270 (35mm press-fit x 1.1/4” BSP (F)) S6270 (42mm press-fit x 1.1/2” BSP (F)) S6270 (54mm press-fit x 2” BSP (F)) S6359 (15mm press-fit x 1/2” BSP (F)) S6359 (22mm press-fit x 3/4” BSP (F)) S6359 (15mm press-fit x 3/4” BSP (F)) S6359 (22mm press-fit x 1” BSP (F)) S6359 (28mm press-fit x 1.1/4” BSP (F)) S6092 (15mm press-fit x 1/2” BSP (M)) S6092 (22mm press-fit x 3/4” BSP (M)) S6092 (28mm press-fit x 1” BSP (M)) S6090 (15mm press-fit x 1/2” BSP (F)) S6090 (22mm press-fit x 3/4” BSP (F)) S6090 (28mm press-fit x 1” BSP (F)) S6472 (15mm press-fit x 1/2” BSP (F)) S6472 (22mm press-fit x 3/4” BSP (F)) S6130 (15mm press-fit x 1/2” BSP (F)) S6130 (18mm press-fit x 1/2” BSP (F)) S6130 (22mm press-fit x 1/2” BSP (F)) S6130 (22mm press-fit x 3/4” BSP (F)) S6130 (28mm press-fit x 1/2” BSP (F)) S6130 (28mm press-fit x 3/4” BSP (F)) S6130 (28mm press-fit x 1” BSP (F)) S6130 (35mm press-fit x 1/2” BSP (F)) S6130 (35mm press-fit x 3/4” BSP (F)) S6130 (35mm press-fit x 1” BSP (F)) S6130 (35mm press-fit x 1.1/4” BSP (F)) S6130 (42mm press-fit x 1/2” BSP (F)) S6130 (42mm press-fit x 3/4” BSP (F)) S6130 (42mm press-fit x 1” BSP (F)) S6130 (42mm press-fit x 1.1/2” BSP (F)) S6130 (54mm press-fit x 1/2” BSP (F)) S6130 (54mm press-fit x 1” BSP (F)) S6130 (54mm press-fit x 2” BSP (F)) S6246 (15mm press-fit x 1/2” BSP (F)) S6246 (22mm press-fit x 3/4” BSP (F)) S6341 (15mm press-fit x 1/2” BSP (M)) S6341 (18mm press-fit x 1/2” BSP (M)) S6341 (22mm press-fit x 3/4” BSP (M)) S6341 (28mm press-fit x 1” BSP (M))
Manufacturer:
Taizhou Double Winners Copper Co Ltd
Company Name
Taizhou Double Winners Copper Co Ltd
Address
Unit B1605 Joyance Tower, Jiaojiang, Taizhou
Country
Zhejiang,

View All Listings by this Company

Print This Approval


#2006051

Range of DZR brass push fit fittings for use with copper pipe, PB pipe (manufactured to BS7291-2) & PEX pipe (manufactured to BS7291-3). When used with copper pipes the maximum working pressure is 16.0 bar. When used with plastic pipes the maximum working pressure is 6.0 bar. Maximum operating temperature 95°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2006051
Expiry date:
30/06/2025
Size:
15mm to 28mm pushfit. 15mm to 28mm shank. ½” to 1” BSP (M) or ½” to 1” BSP (F).
Marking:
Conex logo "B", size, DVGW and CR on socket collar.
Installation Requirements:
R001
Model:
BM8200G Bend Tap connector (pushfit x BSP (F); BM8002G 0150400 BM8002G 0150600 BM8002G 0160400 BM8002G 0200400 BM8002G 0220600 BM8002G 0250600 BM8002G 0260600 BM8090 Equal Elbow (pushfit x pushfit); BM8090 0150000 BM8090 0160000 BM8090 0180000 BM8090 0200000 BM8090 0220000 BM8090 0250000 BM8090 0260000 BM8090 0280000 BM8090G Female Elbow (pushfit x BSP (F)); BM8090G 0150400 BM8090G 0160400 BM8090G 0160600 BM8090G 0180400 BM8090G 0180600 BM8090G 0200600 BM8090G 0220400 BM8090G 0220600 BM8090G 0250600 BM8090G 0260600 BM8092G Male Elbow (pushfit x BSP (M)); BM8092G 0150400 BM8092G 0160400 BM8092G 0160600 BM8092G 0180400 BM8092G 0180600 BM8092G 0200600 BM8092G 0220600 BM8092G 0250600 BM8092G 0260600 BM8130 Equal Tee (pushfit x pushfit x pushfit); BM8130 0151515 BM8130 0161616 BM8130 0181818 BM8130 0201620 BM8130 0202020 BM8130 0221515 BM8130 0221522 BM8130 0221622 BM8130 0221818 BM8130 0221822 BM8130 0222215 BM8130 0222218 BM8130 0222222 BM8130 0252025 BM8130 0252525 BM8130 0262616 BM8130 0262626 BM8130 0281528 BM8130 0282228 BM8130 0282815 BM8130 0282822 BM8130 0282828 BM8130G Female Branch Tee (pushfit x BSP (F) x pushfit); BM8130G 0150415 BM8130G 0160416 BM8130G 0200420 BM8130G 0220422 BM8130G 0220622 BM8130G 0250625 BM8130G 0260626 BM8130G 0280828 BM8240 Reduced Coupling (pushfit x pushfit); BM8240 0161500 BM8240 0181500 BM8240 0201600 BM8240 0201800 BM8240 0221500 BM8240 0221800 BM8240 0252000 BM8240 0262000 BM8240 0282200 BM8240GTap Connector (pushfit x BSP (F); BM8240G 0150400 BM8240G 0150600 BM8240G 0160400 BM8240G 0200400 BM8240G 0220600 BM8240G 0250600 BM8240G 0260600 BM8240G 0260800 BM8243 range Fitting Reducer (pushfit x shank); BM8243 0181500 BM8243 0201600 BM8243 0221500 BM8243 0221800 BM8243G Straight Male Connector (pushfit x BSP (M)); BM8243G 0150400 BM8243G 0150600 BM8243G 0150800 BM8243G 0160400 BM8243G 0160600 BM8243G 0160800 BM8243G 0180400 BM8243G 0180600 BM8243G 0180800 BM8243G 0200400 BM8243G 0200600 BM8243G 0200800 BM8243G 0220600 BM8243G 0220800 BM8243G 0250400 BM8243G 0250600 BM8243G 0250800 BM8243G 0260600 BM8243G 0260800 BM8243G 0280800 BM8270 Equal Coupling (pushfit x pushfit); BM8270 0150000 BM8270 0160000 BM8270 0180000 BM8270 0200000 BM8270 0220000 BM8270 0250000 BM8270 0280000 BM8270G Straight Female Connector (BSP (F) x pushfit); BM8270G 0150400 BM8270G 0150600 BM8270G 0160400 BM8270G 0160600 BM8270G 0180400 BM8270G 0180600 BM8270G 0200400 BM8270G 0200600 BM8270G 0220400 BM8270G 0220600 BM8270G 0220800 BM8270G 0250400 BM8270G 0250600 BM8270G 0250800 BM8270G 0260600 BM8270G 0260800 BM8270G 0280800 BM8301 Stop End (pushfit x pushfit); BM8301 0150000 BM8301 0160000 BM8301 0180000 BM8301 0200000 BM8301 0220000 BM8301 0250000 BM8301 0260000 BM8301 0280000 BM8350 Tank Connector (pushfit x BSP (M)); BM8350 0150400 BM8350 0220400 BM8350 0280800 BM8472G Backplate Elbow (pushfit x BSP (F)); BM8472G 0150400 BM8472G 0160400 BM8472G 0180400 BM8472G 0180600 BM8472G 0200600 BM8472G 0220600
Factor:
Conex Universal Ltd
Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 121 5772831
General Email
salesuk@ibpgroup.com

View All Listings by this Company
Manufacturer:
IDC Manufacturing Group
Company Name
IDC Manufacturing Group
Address
General Email

View All Listings by this Company

Print This Approval


#2007004

‘EPH_WSP19’ Range of brass bodied fittings for use with copper pipe, some fittings are to be soldered with copper pipe (see models). Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2007004
Expiry date:
31/07/2025
Size:
See model
Marking:
Size and DOZ on body
Installation Requirements:
R001
Model:
End Feed Fittings (Soldered): EPH_WSP19_0593 - End Feed Air Vent Cap 15mm EPH_WSP19_0608 - End Feed Wall Plate Elbow 15mm * ½” BSP (M) EPH_WSP19_0618 - End Feed Male Coupler 15mm * ½” BSP (M) EPH_WSP19_0619 - End Feed Male Coupler 15mm * ¾” BSP (M) EPH_WSP19_0625 - End Feed Male Coupler 22mm * ¾” BSP (M) EPH_WSP19_0635 - End Feed Female Coupler 15mm * ½” BSP (F) EPH_WSP19_0642 - End Feed Female Coupler 22mm * ¾” BSP (F) EPH_WSP19_0663 - End Feed Female Elbow 15mm * ½” BSP (F) EPH_WSP19_0676 - End Feed Male Elbow 15mm * ½” BSP (M) Threaded Brass fittings: Threaded Brass Blanking Nut: EPH_WSP19_0719A - ¼” BSP (F) EPH_WSP19_0720 - ⅜” BSP (F) EPH_WSP19_0721 - ½” BSP (F) - CHROME EPH_WSP19_0721A - ½” BSP (F) EPH_WSP19_0722A - ¾” BSP (F) EPH_WSP19_0723 - 1" BSP (F) Threaded Brass Male Flanged Plug: EPH_WSP19_0726 - ½” BSP (F) EPH_WSP19_0727 - ¾” BSP (F) EPH_WSP19_0724 - ¼” BSP (F) EPH_WSP19_0728 - 1" BSP (F) Threaded Brass Reducing Bush: EPH_WSP19_0747A - M-F ½” BSP (M) * ⅜" BSP (F) EPH_WSP19_0749A - M-F ¾” BSP (M) * ½” BSP (F) EPH_WSP19_0746 - M-F ½” BSP (M) * ¼” BSP (F) EPH_WSP19_0750A - M-F 1” BSP (M) * ¾” BSP (F) EPH_WSP19_0751 - M-F 1” BSP (M) * ½” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_0763A - M-M ½” BSP (M) * ½” BSP (M) EPH_WSP19_0764B - M-M ¾” BSP (M) * ¾” BSP (M) EPH_WSP19_0761 - M-M ¼” BSP (M) * ¼” BSP (M) EPH_WSP19_0765A - M-M 1” BSP (M) * 1” BSP (M) Threaded Brass Flanged Backnut: EPH_WSP19_0801 - ½” BSP (F) EPH_WSP19_0802A - ¾” BSP (F) Threaded Brass Female Socket: EPH_WSP19_0843 - ½” BSP (F) EPH_WSP19_0844 - ¾” BSP (F) EPH_WSP19_0841 - ¼” BSP (F) EPH_WSP19_0845 - 1” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_2476 - M-M ⅜” BSP (M) * ⅜” BSP (M) Tap extender: EPH_WSP19_2605 - ½” BSP (F) x ¾” BSP (M) EPH_WSP19_2609 - ¾” BSP (F) * ¾” BSP (M) Multi thread Nipple: EPH_WSP19_2599 - ¾” BSP (M) * ½” BSP (F) * 5/8” BSP (F) with rubber washer
Manufacturer:
Hangzhou Doz Import & Export Co Ltd
Company Name
Hangzhou Doz Import & Export Co Ltd
Address
Room 302, Binke Mansion, No 1503 Xipu Road Binjiang District, Hangzhou
Country
Zhejiang,

View All Listings by this Company

Print This Approval


#2007027

Range of rigid ductile iron couplings (copper colored alkyd enamel) (Style 606-EN), Vic-flange adapter’s (Style 641-EN) and grooved copper fittings (No. 610, 611, 620, 625, 650 & 660 –EN) for use with grooved copper tubing (manufactured to EN 1057 R250). Above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2007027
Expiry date:
31/07/2025
Size:
See model
Marking:
Victaulic, size, model number and technical info on body and clamping rings.
Installation Requirements:
R001
Model:
Style 606-EN, Rigid Coupling for Copper: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm. Style 641-EN, Copper flange Adapter: 54mm, 66.7mm, 76.1mm (4xM16), 76.1mm (8xM16), 108mm, 133mm & 159 mm. No. 610-EN, 90° Copper Elbow: 54mm, 66.7mm, 76.1mm, 108mm, 133m & 159 mm. No. 611-EN, 45° Copper Elbow: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm. No. 620-EN, Copper Tee: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm. No. 625-EN, Copper Reducing Tee: 66.7mm x 54mm, 76.1mm x 66.7mm, 108mm x 76.1mm & 159mm x 108mm. No. 650-EN, Copper Concentric Reducer: 66.7mm x 54mm, 76.1mm x 66.7mm, 108mm x 76.1mm, 133mm x 108mm, 159mm x 108mm & 159 x 133 mm. No. 660-EN, Copper End Cap: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm.
Factor:
Victaulic Europe BVBA
Company Name
Victaulic Europe BVBA
Address
Prijkelstraat 36, B-9810 Nazareth
Country
Belgium

View All Listings by this Company

Print This Approval


#2009023

Fluidfit range of hose barb fittings/stem fittings with push fit connections. Also with EPDM ‘O’-rings. 12 & 15mm models are for use with LLDPE pipe, 22mm models are for use with PEX pipe. Cold water use only Maximum working pressure 10.0 Bar

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2009023
Expiry date:
30/09/2025
Size:
12mm push fit X barbed crimp connection 15mm push fit X barbed crimp connection 22mm push fit X barbed crimp connection
Marking:
CDC and size on collet
Installation Requirements:
R001
Model:
HCBB 1210 (12mm) HCBB 15-1/2 (15mm) HCBB 22-1/2 (15mm) HCBB 22-3/4 (15mm)
Manufacturer:
CDC Pneumatics Corp.
Company Name
CDC Pneumatics Corp.
Address
30, 1-Gil, Secheon-no, Dasa-eup, Dalseong-gun, Daegu (Saecheon-ri) 42921
Country
South Korea
Phone
+82 533547501

View All Listings by this Company

Print This Approval


#2007079

‘EPH_WSP19’ Range of brass bodied fittings for use with copper pipe, some fittings are to be soldered with copper pipe (see models). Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2007079
Expiry date:
31/07/2025
Size:
See model
Marking:
Size and Flomasta on body
Installation Requirements:
R001
Model:
End Feed Fittings (Soldered): EPH_WSP19_0593 - End Feed Air Vent Cap 15mm EPH_WSP19_0608 - End Feed Wall Plate Elbow 15mm * ½” BSP (M) EPH_WSP19_0618 - End Feed Male Coupler 15mm * ½” BSP (M) EPH_WSP19_0619 - End Feed Male Coupler 15mm * ¾” BSP (M) EPH_WSP19_0625 - End Feed Male Coupler 22mm * ¾” BSP (M) EPH_WSP19_0635 - End Feed Female Coupler 15mm * ½” BSP (F) EPH_WSP19_0642 - End Feed Female Coupler 22mm * ¾” BSP (F) EPH_WSP19_0663 - End Feed Female Elbow 15mm * ½” BSP (F) EPH_WSP19_0676 - End Feed Male Elbow 15mm * ½” BSP (M) Threaded Brass fittings: Threaded Brass Blanking Nut: EPH_WSP19_0719A - ¼” BSP (F) EPH_WSP19_0720 - ⅜” BSP (F) EPH_WSP19_0721 - ½” BSP (F) - CHROME EPH_WSP19_0721A - ½” BSP (F) EPH_WSP19_0722A - ¾” BSP (F) EPH_WSP19_0723 - 1" BSP (F) Threaded Brass Male Flanged Plug: EPH_WSP19_0726 - ½” BSP (F) EPH_WSP19_0727 - ¾” BSP (F) EPH_WSP19_0724 - ¼” BSP (F) EPH_WSP19_0728 - 1" BSP (F) Threaded Brass Reducing Bush: EPH_WSP19_0747A - M-F ½” BSP (M) * ⅜" BSP (F) EPH_WSP19_0749A - M-F ¾” BSP (M) * ½” BSP (F) EPH_WSP19_0746 - M-F ½” BSP (M) * ¼” BSP (F) EPH_WSP19_0750A - M-F 1” BSP (M) * ¾” BSP (F) EPH_WSP19_0751 - M-F 1” BSP (M) * ½” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_0763A - M-M ½” BSP (M) * ½” BSP (M) EPH_WSP19_0764B - M-M ¾” BSP (M) * ¾” BSP (M) EPH_WSP19_0761 - M-M ¼” BSP (M) * ¼” BSP (M) EPH_WSP19_0765A - M-M 1” BSP (M) * 1” BSP (M) Threaded Brass Flanged Backnut: EPH_WSP19_0801 - ½” BSP (F) EPH_WSP19_0802A - ¾” BSP (F) Threaded Brass Female Socket: EPH_WSP19_0843 - ½” BSP (F) EPH_WSP19_0844 - ¾” BSP (F) EPH_WSP19_0841 - ¼” BSP (F) EPH_WSP19_0845 - 1” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_2476 - M-M ⅜” BSP (M) * ⅜” BSP (M) Tap extender: EPH_WSP19_2605 - ½” BSP (F) x ¾” BSP (M) EPH_WSP19_2609 - ¾” BSP (F) * ¾” BSP (M) Multi thread Nipple: EPH_WSP19_2599 - ¾” BSP (M) * ½” BSP (F) * 5/8” BSP (F) with rubber washer
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2009338

“Plimat ABS Fittings BS Inch and ABS Adaptor Fittings” range of ABS solvent cement or threaded fittings for use with “Plimat ABS pipe”. Maximum working pressure: 15.0 bar (fittings with ½” - 4” solvent cement connections), 9.0 bar (fittings with 5” or 6” solvent cement connections, with or without threaded connecitons), and 10.0 bar (fittings with threaded connections and ½” - 4” solvent cement connections). Cold water and above ground use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2009338
Expiry date:
30/09/2025
Size:
See model
Marking:
Plimat, size and material on shoulder of fitting. Plimate, size, ABS class, pressure rating, BS5391 and line no. on pipe.
Installation Requirements:
R001
Model:
Elbow 90° Plain Inch: ½” ABSGOP0200, ¾” ABSGOP0250, 1” ABSGOP0320, 1¼” ABSGOP0400, 1½” ABSGOP0500, 2” ABSGOP0630, 2½” ABSGOP0750, 3” ABSGOP0900, 4” ABSGOP1100, 5” ABSGOP1400, 6” ABSGOP1600. Elbow 45° Plain Inch: ½” ABSGYP0200, ¾” ABSGYP0250, 1” ABSGYP0320, 1¼” ABSGYP0400, 1½” ABSGYP0500, 2” ABSGYP0630, 2½” ABSGYP0750, 3” ABSGYP0900, 4” ABSGYP1100, 5” ABSGYP1400, 6” ABSGYP1600. Socket Plain Inch: ½” ABSMAP0200, ¾” ABSMAP0250, 1” ABSMAP0320, 1¼” ABSMAP0400, 1½” ABSMAP0500, 2” ABSMAP0630, 2½” ABSMAP0750, 3” ABSMAP0900, 4” ABSMAP1100, 5” ABSMAP1400, 6” ABSMAP1600. Tee Plain Inch: ½” ABSTIP0200, ¾” ABSTIP0250, 1” ABSTIP0320, 1¼” ABSTIP0400, 1½” ABSTIP0500, 2” ABSTIP0630, 2½” ABSTIP0750, 3” ABSTIP0900, 4” ABSTIP1100, 5” ABSTIP1400, 6” ABSTIP1600. Cap Plain Inch: ½” ABSCAP0200, ¾” ABSCAP0250, 1” ABSCAP0320, 1¼” ABSCAP0400, 1½” ABSCAP0500, 2” ABSCAP0630, 2½” ABSCAP0750, 3” ABSCAP0900, 4” ABSCAP1100, 6” ABSCAP1600. Bend 90° Plain Inch: ½” ABSCUP0200, ¾” ABSCUP0250, 1” ABSCUP0320, 1¼” ABSCUP0400, 1½” ABSCUP0500, 2” ABSCUP0630, 2½” ABSCUP0750, 3” ABSCUP0900, 4” ABSCUP1100. Union Plain Inch: ½” ABSBOP0200, ¾” ABSBOP0250, 1” ABSBOP0320, 1¼” ABSBOP0400, 1½” ABSBOP0500, 2” ABSBOP0630, 2½” ABSBOP0750, 3” ABSBOP0900, 4” ABSBOP1100. Reducer Plain Inch: ¾” x ½” ABSRCP025B, 1” x ½” ABSRCP032B, 1” x ¾” ABSRCP032C, 1¼” x 1” ABSRCP040D, 1½” x ¾” ABSRCP050C, 1½” x 1” ABSRCP050D, 1½” x 1¼” ABSRCP050E, 2” x 1” ABSRCP063D, 2” x 1¼” ABSRCP063E, 2” x 1½” ABSRCP063F, 2½” x 1½” ABSRCP075F, 2½” x 2” ABSRCP075G, 3” x 1½” ABSRCP090F, 3” x 2” ABSRCP090G, 3” x 2½” ABSRCP090H, 4” x 2” ABSRCP110G, 4” x 3” ABSRCP110I, 5” x 4” ABSRCP140L, 6” x 4” ABSRCP160L. Stub Flange Plain Inch: 1” ABSQRP0320, 1¼” ABSQRP0400, 1½” ABSQRP0500, 2” ABSQRP0630, 2½” ABSQRP0750, 3” ABSQRP0900, 4” ABSQRP1100, 5” ABSQRP1400, 6” ABSQRP1600. Full Faced Flange Plain Inch: ½” ABSFNP0200, ¾” ABSFNP0250, 1” ABSFNP0320, 1¼” ABSFNP0400, 1½” ABSFNP0500, 2” ABSFNP0630, 2½” ABSFNP0750, 3” ABSFNP0900, 4” ABSFNP1100. Blanking Flange Plain Inch: ½” ABSFCP0200, ¾” ABSFCP0250, 1” ABSFCP0320, 1¼” ABSFCP0400, 1½” ABSFCP0500, 2” ABSFCP0630, 2½” ABSFCP0750, 3” ABSFCP0900, 4” ABSFCP1100, 6” ABSFCP1600. Elbow 90° Plain - Female Threaded BSP: ½” ABSGOC0200, ¾” ABSGOC0250, 1” ABSGOC0320, 1¼” ABSGOC0400, 1½” ABSGOC0500, 2” ABSGOC0630, 3” ABSGOC0900. Tee Plain - Female Threaded BSP: ½” ABSTIC0200, ¾” ABSTIC0250, 1” ABSTIC0320, 1¼” ABSTIC0400, 1½” ABSTIC0500, 2” ABSTIC0630, 3” ABSTIC0900. Socket Plain - Female Threaded BSP: ½” ABSMAC0200, ¾” ABSMAC0250, 1” ABSMAC0320, 1¼” ABSMAC0400, 1½” ABSMAC0500, 2” ABSMAC0630, 3” ABSMAC0900, 4” ABSMAC1100. Socket Plain - Male Threaded BSP: ½” ABSAMC0200, ¾” ABSAMC0250, 1” ABSAMC0320, 1¼” ABSAMC0400, 1½” ABSAMC0500, 2” ABSAMC0630, 3” ABSAMC0900, 4” ABSAMC1100. Male Spigot Plain - Female Threaded BSP: ½” ABSAFC0200, ¾” ABSAFC0250, 1” ABSAFC0320, 1¼” ABSAFC0400, 1½” ABSAFC0500, 2” ABSAFC0630. Reducing Bush Plain Male - Female Threaded BSP: ½” x ⅜” ABSRCC020A, ¾” x ½” ABSRCC025B, 1” x ¾” ABSRCC032C. Composite Union Plain Female - Female Brass Threaded BSP: ½” ABSBFC0200, ¾” ABSBFC0250, 1” ABSBFC0320, 1¼” ABSBFC0400, 1½” ABSBFC0500, 2” ABSBFC0630, 2½” ABSBFC0750, 3” ABSBFC0900. Composite Union Plain Female - Male Brass Threaded BSP: ½” ABSBMC0200, ¾” ABSBMC0250, 1” ABSBMC0320, 1¼” ABSBMC0400, 1½” ABSBMC0500, 2” ABSBMC0630, 2½” ABSBMC0750, 3” ABSBMC0900. Tank Connector Plain - Male Threaded BSP: ½” ABSTCC0200, ¾” ABSTCC0250, 1” ABSTCC0320, 1¼” ABSTCC0400, 1½” ABSTCC0500, 2” ABSTCC0630, 2½” ABSTCC0750, 3” ABSTCC0900, 4” ABSTCC1100. Barrel Nipple Plain - Male Threaded BSP: ⅜” ABSBNC0160, ½” ABSBNC0200, ¾” ABSBNC0250, 1” ABSBNC0320, 1¼” ABSBNC0400, 1½” ABSBNC0500, 2” ABSBNC0630, 2½” ABSBNC0750, 3” ABSBNC0900, 4” ABSBNC1100. Barrel Nipple Threaded BSP: ½” ABSBAF0200, ¾” ABSBAF0250, 1” ABSBAF0320, 1¼” ABSBAF0400, 1½” ABSBAF0500, 2” ABSBAF0630, 2½” ABSBAF0750, 3” ABSBAF0900, 4” ABSBAF1100. Back Nuts Threaded BSP: ½” ABSNUF0200, ¾” ABSNUF0250, 1” ABSNUF0320, 1¼” ABSNUF0400, 1½” ABSNUF0500, 2” ABSNUF0630, 2½” ABSNUF0750, 3” ABSNUF0900, 4” ABSNUF1100. Pipe 9 bar: 1” ABSCLC0320, 1¼” ABSCLC0400, 1½” ABSCLC0500, 2” ABSCLC0630, 2½” ABSCLC0750, 3” ABSCLC0900, 4” ABSCLC1100, 6” ABSCLC1600. Pipe 15 Bar: ½” ABSCLE0200, ¾” ABSCLE0250, 1” ABSCLE0320, 1¼” ABSCLE0400, 1½” ABSCLE0500, 2” ABSCLE0630, 3” ABSCLE0900, 4” ABSCLE1100.
Factor:
Plimat (UK) Ltd
Company Name
Plimat (UK) Ltd
Address
Unit 7, Newmans Copse Road, Hounsdown Business Park
Postcode
SO40 9LX
Country
Totton,
Phone
0845 055 9022

View All Listings by this Company

Print This Approval


#2006065

Range of PSU, POM & DZR brass pushfit fittings for use with PE-x pipe (manufactured to BS7291-3), PB pipe (manufactured to BS7291-2) & copper pipe. Maximum working pressure 10.0 bar @ 65°C (PSU & DZR Brass Fittings). Open outlet use only @ 20°C (POM Fittings).

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2006065
Expiry date:
30/06/2025
Size:
See model
Marking:
TLC on bodies of plastic fittings. TLC on collets of brass fittings.
Installation Requirements:
R001
Model:
PSU Fittings: SMF6741M-2P- 2 Ports Manifold 22mm pushfit x 10mm pushfit SMF6746M-2P- 2 Ports Manifold 22mm pushfit x 15mm pushfit SMF6741M-4P- 4 Ports Manifold 22mm pushfit x 10mm pushfit POM Fittings: ATC44M-Tank connector 22mm pushfit x 3/4” BSP male ATC66M-Tank connector 15mm pushfit x 1/2” BSP male ATC44MBK-Tank connector 22mm pushfit x 3/4” BSP male ATC66MBK-Tank connector 15mm pushfit x 1/2” BSP male DZR Brass Fittings: SBMCC6741M-Cylinder Adaptor 22mm pushfit x 1” BSP male SBFA6764M-Female Coupler 15mm pushfit x 1/2” BSP female SBFA6765M-Female Coupler 15mm pushfit x 3/4” BSP female SBFA6745M-Female Coupler 22mm pushfit x 3/4” BSP female SBMC6764M-Male Coupler 15mm pushfit x 1/2” BSP male SBMC6745M- Male Coupler 22mm pushfit x 3/4” BSP male SBBPE6764M-Back Plate Elbow 15mm pushfit x 1/2” BSP female
Manufacturer:
SNC Corporation
Company Name
SNC Corporation
Address
Chungcheonmacha-Ro Bupyeong-Gu 21301
Country
South Korea

View All Listings by this Company

Print This Approval


#2010316

Range of press fittings incorporating copper or copper alloy bodies and EPDM O’-rings for use with copper tube to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2010316
Expiry date:
31/10/2025
Size:
See model.
Marking:
Conex logo >B< on body
Installation Requirements:
R001
Model:
Copper alloy: PIR4090G; - Threaded Elbow PIR4090G040400 – ½” x ½” BSP (M) PIR4090G060600 – ¾” x ¾” BSP (M) PIR4092G; - Press Elbow PIR4092G040400 – ½” x ½” BSP (M) PIR4092G060600 – ¾” x ¾” BSP (M) PIR4243G; - Male Adaptor PIR4243G040400 – ½” x ½” BSP (M) PIR4243G040600 – ½” x ¾” BSP (M) PIR4243G060400 – ¾” x ½” BSP (M) PIR4243G060600 – ¾” x ¾” BSP (M) PIR4243G080600 – 1” x ¾” BSP (M) PIR4243G080800 – 1” x 1” BSP (M) PIR4471G; - Female Wallplate Elbow PIR4471G040400 – ½” x ½” BSP (M) PIR4471G060600 – ¾” – ¾” BSP (M) PIR4473G; - Male Wall plate Elbow PIR4473G040400 – ½” BSP (M) PIR4270G; - Female Adaptor PIR4270G040400 – ½” x ½” BSP (M) PIR4270G060600 – ¾” x ¾” BSP (M) PIR4270G080800 – 1” x 1” BSP (M Copper: PIR5040; - 45° Street Elbow PIR5040 040000 – ½” BSP (M) PIR5040 060000 – ¾” BSP (M) PIR5040 080000 – 1” BSP (M) PIR5001; - 90° Street Bend PIR5001 040000 – ½” BSP (M) PIR5001 060000 – ¾” BSP (M) PIR5001 080000 – 1” BSP (M) PIR5240; - Reducing Coupler PIR5240 060400 – ¾” x ½” BSP (M) PIR5240 080400 – 1” x ½” BSP (M) PIR5240 080600 – 1” x ¾” BSP (M) PIR5130; - Tee Reduced PIR5130 060604 – ¾” x ¾” x ½” BSP (M) PIR5002; - 90° Bend PIR5002 040000 – ½” BSP (M) PIR5002 060000 – ¾” BSP (M) PIR5002 080000 – 1” V PIR5041; - 45° Elbow PIR5041 040000 – ½” BSP (M) PIR5041 060000 – ¾” BSP (M) PIR5041 080000 – 1” BSP (M) PIR5130; - Equal Tee PIR5130 040000 – ½” BSP (M) PIR5130 060000 – ¾” BSP (M) PIR5130 080000 – 1” BSP (M) PIR5270; - Coupler PIR5270 040000 – ½” BSP (M) PIR5270 060000 – ¾” BSP (M) PIR5270 080000 – 1” BSP (M) PIR5301; – Stop End PIR5301 040000 – ½” BSP (M) PIR5301 060000 – ¾” BSP (M) PIR5301 080000 – 1” BSP (M) PIR5130RB; - Tee Reduced Branch PIR5130 060406 – ¾” x ½” x ¾” BSP (M) PIR5130 080408 – 1” x ½” x 1” BSP (M) PIR5130 080608 – 1” x ¾” x 1” BSP (M) PIR5275; - Slip Coupler PIR5275 040000 – ½” BSP (M) PIR5275 060000 – ¾” BSP (M) PIR5275 080000 – 1” BSP (M) PIR5243; - Fitting Reducer PIR5243 060400 – ¾” x ½” BSP (M) PIR5243 080400 – 1” x ½” BSP (M) PIR5243 080600 – 1” x ¾” BSP (M) PIR5130REB - Tee Reduced End & Branch PIR5130 060404 – ¾” x ½” x ½” BSP (M) Models added February 2021: PIR5130 080806 – 1” X 1” X ¾” BSP (M) PIR5130 040604 – ½” X ¾” X ½” BSP (M) PIR5130 060806 – ¾“ X 1” X ¾” BSP (M) PIR5130 040804 – ½” X 1” X ½” BSP (M) PIR5130 080404 – 1” X ½” X ½” BSP (M) PIR5130 080604 – 1” X ¾” X ½” BSP (M) PIR5130 080406 – 1” X ½” X ¾” BSP (M)
Factor:
Conex Universal Ltd
Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 121 5772831
General Email
salesuk@ibpgroup.com

View All Listings by this Company
Manufacturer:
IBP Atcosa SL
Company Name
IBP Atcosa SL
Address
General Email

View All Listings by this Company

Print This Approval


#2006084

Range of Flomasta brass pushfit fittings for use with PE-x pipe (manufactured to BS7291-3), PB pipe (manufactured to BS7291-2) & copper pipe. Maximum working pressure 10.0 bar @ 65°C (PSU & DZR Brass Fittings). Open outlet use only @ 20°C (POM Fittings).

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2006084
Expiry date:
30/06/2025
Size:
See model
Marking:
TLC on bodies of brass fittings. TLC on collet.
Installation Requirements:
R001
Model:
PSU Fittings: SMF6741M-2P 2 Ports Manifold 22mm pushfit x 10mm pushfit SMF6746M-2P- 2 Ports Manifold 22mm pushfit x 15mm pushfit SMF6741M-4P- 4 Ports Manifold 22mm pushfit x 10mm pushfit POM Fittings: ATC44M-Tank connector 22mm pushfit x 3/4” BSP male ATC66M-Tank connector 15mm pushfit x 1/2” BSP male ATC44MBK-Tank connector 22mm pushfit x 3/4” BSP male ATC66MBK-Tank connector 15mm pushfit x 1/2” BSP male DZR Brass Fittings: SBMCC6741M-Cylinder Adaptor 22mm pushfit x 1” BSP male SBFA6764M-Female Coupler 15mm pushfit x 1/2” BSP female SBFA6765M-Female Coupler 15mm pushfit x 3/4” BSP female SBFA6745M-Female Coupler 22mm pushfit x 3/4” BSP female SBMC6764M-Male Coupler 15mm pushfit x 1/2” BSP male SBMC6745M- Male Coupler 22mm pushfit x 3/4” BSP male SBBPE6764M-Back Plate Elbow 15mm pushfit x 1/2” BSP female
Factor:
Kingfisher Plc.
Company Name
Kingfisher Plc.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX
Phone
+44 (0) 20 7372 8008

View All Listings by this Company
Manufacturer:
SNC Corporation
Company Name
SNC Corporation
Address
Chungcheonmacha-Ro Bupyeong-Gu 21301
Country
South Korea

View All Listings by this Company

Print This Approval


#1909125

Range of copper crimped fittings with EPDM ‘O’-rings (except for 28171 & 28173 models) for use with copper pipe. The 27897 & 27898 models added May 2022 are for use with copper pipe manufactured to EN 1057. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1909125
Expiry date:
30/09/2024
Size:
12mm - 108mm.
Marking:
BRYMEC & size on body.
Installation Requirements:
R001
Model:
27800 15mm Copper-Press 90° M/F Bend (M-Profile) 27801 22mm Copper-Press 90° M/F Bend (M-Profile) 27802 28mm Copper-Press 90° M/F Bend (M-Profile) 27803 35mm Copper-Press 90° M/F Bend (M-Profile) 27804 42mm Copper-Press 90° M/F Bend (M-Profile) 27805 54mm Copper-Press 90° M/F Bend (M-Profile) 27806 67mm Copper-Press 90° M/F Bend (M-Profile) 27807 76mm Copper-Press 90° M/F Bend (M-Profile) 27809 108mm Copper-Press 90° M/F Bend (M-Profile) 27810 15mm Copper-Press 90° F/F Bend (M-Profile) 27811 22mm Copper-Press 90° F/F Bend (M-Profile) 27812 28mm Copper-Press 90° F/F Bend (M-Profile) 27813 35mm Copper-Press 90° F/F Bend (M-Profile) 27814 42mm Copper-Press 90° F/F Bend (M-Profile) 27815 54mm Copper-Press 90° F/F Bend (M-Profile) 27816 67mm Copper-Press 90° F/F Bend (M-Profile) 27817 76mm Copper-Press 90° F/F Bend (M-Profile) 27819 108mm Copper-Press 90° F/F Bend (M-Profile) 27820 15mm Copper-Press 45° M/F Bend (M-Profile) 27821 22mm Copper-Press 45° M/F Bend (M-Profile) 27822 28mm Copper-Press 45° M/F Bend (M-Profile) 27823 35mm Copper-Press 45° M/F Bend (M-Profile) 27824 42mm Copper-Press 45° M/F Bend (M-Profile) 27825 54mm Copper-Press 45° M/F Bend (M-Profile) 27826 67mm Copper-Press 45° M/F Bend (M-Profile) 27827 76mm Copper-Press 45° M/F Bend (M-Profile) 27829 108mm Copper-Press 45° M/F Bend (M-Profile) 27830 15mm Copper-Press 45° F/F Bend (M-Profile) 27831 22mm Copper-Press 45° F/F Bend (M-Profile) 27832 28mm Copper-Press 45° F/F Bend (M-Profile) 27833 35mm Copper-Press 45° F/F Bend (M-Profile) 27834 42mm Copper-Press 45° F/F Bend (M-Profile) 27835 54mm Copper-Press 45° F/F Bend (M-Profile) 27836 67mm Copper-Press 45° F/F Bend (M-Profile) 27837 76mm Copper-Press 45° F/F Bend (M-Profile) 27839 108mm Copper-Press 45° F/F Bend (M-Profile) 27840 15mm Copper-Press Full Crossover (M-Profile) 27841 22mm Copper-Press Full Crossover (M-Profile) 27845 15mm Copper-Press Partial Crossover (M-Profile) 27846 22mm Copper-Press Partial Crossover (M-Profile) 27850 15mm Copper-Press Equal Tee (M-Profile) 27851 22mm Copper-Press Equal Tee (M-Profile) 27852 28mm Copper-Press Equal Tee (M-Profile) 27853 35mm Copper-Press Equal Tee (M-Profile) 27854 42mm Copper-Press Equal Tee (M-Profile) 27855 54mm Copper-Press Equal Tee (M-Profile) 27856 67mm Copper-Press Equal Tee (M-Profile) 27857 76mm Copper-Press Equal Tee (M-Profile) 27859 108mm Copper-Press Equal Tee (M-Profile) 27860 15 x 22 x 15mm Copper-Press Reducing Tee ExBxE (M-Profile) 27861 22 x 15 x 15mm Copper-Press Reducing Tee ExBxE (M-Profile) 27862 22 x 15 x 22mm Copper-Press Reducing Tee ExBxE (M-Profile) 27863 22 x 22 x 15mm Copper-Press Reducing Tee ExBxE (M-Profile) 27865 28 x 15 x 22mm Copper-Press Reducing Tee ExBxE (M-Profile) 27866 28 x 15 x 28mm Copper-Press Reducing Tee ExBxE (M-Profile) 27867 28 x 22 x 22mm Copper-Press Reducing Tee ExBxE (M-Profile) 27868 28 x 22 x 28mm Copper-Press Reducing Tee ExBxE (M-Profile) 27869 28 x 28 x 15mm Copper-Press Reducing Tee ExBxE (M-Profile) 27870 28 x 28 x 22mm Copper-Press Reducing Tee ExBxE (M-Profile) 27872 35 x 15 x 35mm Copper-Press Reducing Tee ExBxE (M-Profile) 27874 35 x 22 x 28mm Copper-Press Reducing Tee ExBxE (M-Profile) 27875 35 x 22 x 35mm Copper-Press Reducing Tee ExBxE (M-Profile) 27876 35 x 28 x 28mm Copper-Press Reducing Tee ExBxE (M-Profile) 27877 35 x 28 x 35mm Copper-Press Reducing Tee ExBxE (M-Profile) 27880 42 x 15 x 42mm Copper-Press Reducing Tee ExBxE (M-Profile) 27881 42 x 22 x 42mm Copper-Press Reducing Tee ExBxE (M-Profile) 27882 42 x 28 x 42mm Copper-Press Reducing Tee ExBxE (M-Profile) 27884 42 x 35 x 42mm Copper-Press Reducing Tee ExBxE (M-Profile) 27885 54 x 22 x 54mm Copper-Press Reducing Tee ExBxE (M-Profile) 27886 54 x 28 x 54mm Copper-Press Reducing Tee ExBxE (M-Profile) 27887 54 x 35 x 54mm Copper-Press Reducing Tee ExBxE (M-Profile) 27888 54 x 42 x 54mm Copper-Press Reducing Tee ExBxE (M-Profile) 28255 67 x 28 x 67mm Copper-Press Reducing Tee ExBxE (M-Profile) 27889 67 x 54 x 67mm Copper-Press Reducing Tee ExBxE (M-Profile) 28260 76 x 35 x 76mm Copper-Press Reducing Tee ExBxE (M-Profile) 27890 76 x 54 x 76mm Copper-Press Reducing Tee ExBxE (M-Profile) 27893 108 x 54 x 108mm Copper-Press Reducing Tee ExBxE (M-Profile) 27896 42 x 42 x 35mm Copper-Press Reducing Tee ExBxE (M-Profile) 27900 22 x 15mm Copper-Press Reducing Coupling (M-Profile) 27901 28 x 15mm Copper-Press Reducing Coupling (M-Profile) 27902 28 x 22mm Copper-Press Reducing Coupling (M-Profile) 27903 35 x 22mm Copper-Press Reducing Coupling (M-Profile) 27904 35 x 28mm Copper-Press Reducing Coupling (M-Profile) 27905 42 x 22mm Copper-Press Reducing Coupling (M-Profile) 27906 42 x 28mm Copper-Press Reducing Coupling (M-Profile) 27907 42 x 35mm Copper-Press Reducing Coupling (M-Profile) 27908 54 x 28mm Copper-Press Reducing Coupling (M-Profile) 27909 54 x 35mm Copper-Press Reducing Coupling (M-Profile) 27910 54 x 42mm Copper-Press Reducing Coupling (M-Profile) 27915 22 x 15mm Copper-Press Reducer (M-Profile) 27916 28 x 15mm Copper-Press Reducer (M-Profile) 27917 28 x 22mm Copper-Press Reducer (M-Profile) 27918 35 x 22mm Copper-Press Reducer (M-Profile) 27919 35 x 28mm Copper-Press Reducer (M-Profile) 27920 42 x 22mm Copper-Press Reducer (M-Profile) 27921 42 x 28mm Copper-Press Reducer (M-Profile) 27922 42 x 35mm Copper-Press Reducer (M-Profile) 27923 54 x 35mm Copper-Press Reducer (M-Profile) 27924 54 x 42mm Copper-Press Reducer (M-Profile) 28231 67 x 28mm Copper-Press Reducer (M-Profile) 28232 67 x 35mm Copper-Press Reducer (M-Profile) 28233 67 x 42mm Copper-Press Reducer (M-Profile) 27925 67 x 54mm Copper-Press Reducer (M-Profile) 28234 76 x 35mm Copper-Press Reducer (M-Profile) 27926 76 x 54mm Copper-Press Reducer (M-Profile) 28236 76 x 67mm Copper-Press Reducer (M-Profile) 28237 108 x42mm Copper-Press Reducer (M-Profile) 27929 108 x54mm Copper-Press Reducer (M-Profile) 28238 108 x67mm Copper-Press Reducer (M-Profile) 27930 108 x76mm Copper-Press Reducer (M-Profile) 27932 54 x 28mm Copper-Press Reducer (M-Profile) 27940 15mm Copper-Press Coupling (M-Profile) 27941 22mm Copper-Press Coupling (M-Profile) 27942 28mm Copper-Press Coupling (M-Profile) 27943 35mm Copper-Press Coupling (M-Profile) 27944 42mm Copper-Press Coupling (M-Profile) 27945 54mm Copper-Press Coupling (M-Profile) 27946 67mm Copper-Press Coupling (M-Profile) 27947 76mm Copper-Press Coupling (M-Profile) 27949 108mm Copper-Press Coupling (M-Profile) 27950 15mm Copper-Press Slip Coupling (M-Profile) 27951 22mm Copper-Press Slip Coupling (M-Profile) 27952 28mm Copper-Press Slip Coupling (M-Profile) 27953 35mm Copper-Press Slip Coupling (M-Profile) 27954 42mm Copper-Press Slip Coupling (M-Profile) 27955 54mm Copper-Press Slip Coupling (M-Profile) 27956 67mm Copper-Press Slip Coupling (M-Profile) 27957 76mm Copper-Press Slip Coupling (M-Profile) 27960 15mm Copper-Press End Cap (M-Profile) 27961 22mm Copper-Press End Cap (M-Profile) 27962 28mm Copper-Press End Cap (M-Profile) 27963 35mm Copper-Press End Cap (M-Profile) 27964 42mm Copper-Press End Cap (M-Profile) 27965 54mm Copper-Press End Cap (M-Profile) 27966 67mm Copper-Press End Cap (M-Profile) 27967 76mm Copper-Press End Cap (M-Profile) 28071 15mm x1/2" Copper-Press Female Iron 90° Elbow (M-Profile) 28074 22mm x3/4" Copper-Press Female Iron 90° Elbow (M-Profile) 28081 15mm x1/2" Copper-Press Male Iron 90° Elbow (M-Profile) 28101 15mm x1/2" x 15mm Copper-Press Female Branch Reducing Tee 28102 22mm x1/2" x 22mm Copper-Press Female Branch Reducing Tee 28104 28mm x1/2" x 28mm Copper-Press Female Branch Reducing Tee 28106 35mm x1/2" x 35mm Copper-Press Female Branch Reducing Tee 28108 42mm x1/2" x 42mm Copper-Press Female Branch Reducing Tee 28110 54mm x1/2" x 54mm Copper-Press Female Branch Reducing Tee 28115 15mm x 3/8" Copper-Press Male Iron Adapter (M-Profile) 28116 15mm x 1/2" Copper-Press Male Iron Adapter (M-Profile) 28117 15mm x 3/4" Copper-Press Male Iron Adapter (M-Profile) 28118 22mm x 1/2" Copper-Press Male Iron Adapter (M-Profile) 28119 22mm x 3/4" Copper-Press Male Iron Adapter (M-Profile) 28120 22mm x 1" Copper-Press Male Iron Adapter (M-Profile) 28121 28mm x 3/4" Copper-Press Male Iron Adapter (M-Profile) 28122 28mm x 1" Copper-Press Male Iron Adapter (M-Profile) 28125 35mm x 1 1/4" Copper-Press Male Iron Adapter (M-Profile) 28128 42mm x 1 1/2" Copper-Press Male Iron Adapter (M-Profile) 28130 54mm x 2" Copper-Press Male Iron Adapter (M-Profile) 28131 67mm x 2 1/2" Copper-Press Male Iron Adapter (M-Profile) 28133 76mm x 3" Copper-Press Male Iron Adapter (M-Profile) 28141 15mm x 1/2" Copper-Press Plug- In Female Adapter (M-Profile) 28142 22mm x 1/2" Copper-Press Plug- In Female Adapter (M-Profile) 28143 22mm x 3/4" Copper-Press Plug- In Female Adapter (M-Profile) 28145 28mm x 1" Copper-Press Plug- In Female Adapter (M-Profile) 28148 54mm x 2" Copper-Press Plug- In Female Adapter (M-Profile) 28149 35mm x 1" Copper-Press Plug- In Female Adapter (M-Profile) 28151 15mm x 1/2" Copper-Press Female Adapter (M-Profile) 28153 22mm x 1/2" Copper-Press Female Adapter (M-Profile) 28154 22mm x 3/4" Copper-Press Female Adapter (M-Profile) 28157 28mm x 1" Copper-Press Female Adapter (M-Profile) 28160 35mm x 1 1/4" Copper-Press Female Adapter (M-Profile) 28163 42mm x 1 1/2" Copper-Press Female Adapter (M-Profile) 28165 54mm x 2" Copper-Press Female Adapter (M-Profile) 28166 67mm x 2 1/2" Copper-Press Female Adapter (M-Profile) 28169 76mm x 3" Copper-Press Female Adapter (M-Profile) 28171 15mm x 1/2" Copper-Press Plug- In Male Adapter (M-Profile) 28173 22mm x 3/4" Copper-Press Plug- In Male Adapter (M-Profile) 28190 15mm x 1/2" Copper-Press Female Union - Conical Seat 28192 22mm x 3/4" Copper-Press Female Union - Conical Seat 28195 28mm x 1" Copper-Press Female Union - Conical Seat 28196 35mm x 1 1/4" Copper-Press Female Union - Conical Seat 28197 42mm x 1 1/2" Copper-Press Female Union - Conical Seat 28198 54mm x 2" Copper-Press Female Union - Conical Seat 28200 15mm x 1/2" Copper-Press Male Union - Conical Seat 28203 22mm x 3/4" Copper-Press Male Union - Conical Seat 28206 28mm x 1" Copper-Press Male Union - Conical Seat 28207 35mm x 1 1/4" Copper-Press Male Union - Conical Seat 28208 42mm x 1 1/2" Copper-Press Male Union - Conical Seat 28209 54mm x 2" Copper-Press Male Union - Conical Seat Models added April 2022: 27897 54mm x 22mm x 54mm - Press manifold tee 27898 54mm x 28mm x 54mm - Press manifold tee
Factor:
Brymec Ltd
Company Name
Brymec Ltd
Address
Unit C Redlands Centre, Coulsdon, Surrey
Postcode
CR5 2HT

View All Listings by this Company

Print This Approval


#2101334

Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2101334
Expiry date:
31/01/2026
Size:
see model
Marking:
Dunshan Press and size on body.
Installation Requirements:
R001
Model:
DS2001‐15 Equal coupling 15mm DS2001‐18 Equal coupling 18mm DS2001‐22 Equal coupling 22mm DS2001‐28 Equal coupling 28mm DS2001‐35 Equal coupling 35mm DS2001‐42 Equal coupling 42mm DS2001‐54 Equal coupling 54mm DS2002‐15 Adjustable coupling 15mm DS2002‐18 Adjustable coupling 18mm DS2002‐22 Adjustable coupling 22mm DS2002‐28 Adjustable coupling 28mm DS2002‐35 Adjustable coupling 35mm DS2002‐42 Adjustable coupling 42mm DS2002‐54 Adjustable coupling 54mm DS2003‐15 90° equal elbow 15mm DS2003‐18 90° equal elbow 18mm DS2003‐22 90° equal elbow 22mm DS2003‐28 90° equal elbow 28mm DS2003‐35 90° equal elbow 35mm DS2003‐42 90° equal elbow 42mm DS2003‐54 90° equal elbow 54mm DS2004‐15 90° plain elbow‐B 15mm DS2004‐18 90° plain elbow‐B 18mm DS2004‐22 90° plain elbow‐B 22mm DS2004‐28 90° plain elbow‐B 28mm DS2004‐35 90° plain elbow‐B 35mm DS2004‐42 90° plain elbow‐B 42mm DS2004‐54 90° plain elbow‐B 54mm DS2005‐15 45° equal elbow 15mm DS2005‐18 45° equal elbow 18mm DS2005‐22 45° equal elbow 22mm DS2005‐28 45° equal elbow 28mm DS2005‐35 45° equal elbow 35mm DS2005‐42 45° equal elbow 42mm DS2005‐54 45° equal elbow 54mm DS2006‐15 45° plain elbow‐B 15mm DS2006‐18 45° plain elbow‐B 18mm DS2006‐22 45° plain elbow‐B 22mm DS2006‐28 45° plain elbow‐B 28mm DS2006‐35 45° plain elbow‐B 35mm DS2006‐42 45° plain elbow‐B 42mm DS2006‐54 45° plain elbow‐B 54mm DS2007‐15 Equal tee 15mm DS2007‐18 Equal tee 18mm DS2007‐22 Equal tee 22mm DS2007‐28 Equal tee 28mm DS2007‐35 Equal tee 35mm DS2007‐42 Equal tee 42mm DS2007‐54 Equal tee 54mm DS2008‐18*15 Reducing tee 18mm×15mm DS2008‐22*15 Reducing tee 22mm×15mm DS2008‐22*18 Reducing tee 22mm×18mm DS2008‐28*15 Reducing tee 28mm×15mm DS2008‐28*18 Reducing tee 28mm×18mm DS2008‐28*22 Reducing tee 28mm×22mm DS2008‐35*15 Reducing tee 35mm×15mm DS2008‐35*18 Reducing tee 35mm×18mm DS2008‐35*22 Reducing tee 35mm×22mm DS2008‐35*28 Reducing tee 35mm×28mm DS2008‐42*15 Reducing tee 42mm×15mm DS2008‐42*18 Reducing tee 42mm×18mm DS2008‐42*22 Reducing tee 42mm×22mm DS2008‐42*28 Reducing tee 42mm×28mm DS2008‐42*35 Reducing tee 42mm×35mm DS2008‐54*15 Reducing tee 54mm×15mm DS2008‐54*18 Reducing tee 54mm×18mm DS2008‐54*22 Reducing tee 54mm×22mm DS2008‐54*28 Reducing tee 54mm×28mm DS2008‐54*35 Reducing tee 54mm×35mm DS2008‐54*42 Reducing tee 54mm×42mm DS2009‐15*Rp1/2 Female coupling 15mm×Rp1/2’’ DS2009‐22*Rp3/4 Female coupling 22mm×Rp3/4” DS2009‐28*Rp1 Female coupling 28mm×Rp1” DS2009‐35*Rp1 1/4 Female coupling 35mm×Rp1‐“1/4” DS2009‐42*Rp1 1/2 Female coupling 42mm×Rp1‐1/2” DS2009‐54*Rp2 Female coupling 54mm×Rp2” DS2010‐15*G1/2 Rotatable coupling 15mm×G1/2” DS2010‐18*G1/2 Rotatable coupling 18mm×G1/2” DS2010‐22*G3/4 Rotatable coupling 22mm×G3/4” DS2010‐28*G1 Rotatable coupling 28mm×G1” DS2010‐35*G1 1/4 Rotatable coupling 35mm×G1‐1/4” DS2010‐42*G1 1/2 Rotatable coupling 42mm×G1‐1/2” DS2010‐54*G2 Rotatable coupling 54mm×G2” DS2011‐15*R1/2 Male coupling 15mm×R1/2” DS2011‐18*R1/2 Male coupling 18mm×R1/2” DS2011‐22*R3/4 Male coupling 22mm×R3/4” DS2011‐28*R1 Male coupling 28mm×R1” DS2011‐35*R1 1/4 Male coupling 35mm×R1‐1/4” DS2011‐42*R1 1/2 Male coupling 42mm×R1‐1/2” DS2011‐54*R2 Male coupling 54mm×R2” DS2012‐15*Rp1/2 Female elbow 15mm×Rp1/2” DS2012‐18*Rp1/2 Female elbow 18mm×Rp1/2” DS2012‐22*Rp3/4 Female elbow 22mm×Rp3/4” DS2012‐28*Rp1 Female elbow 28mm×Rp1” DS2012‐35*Rp1 1/4 Female elbow 35mm×Rp1‐1/4” DS2012‐42*Rp1 1/2 Female elbow 42mm×Rp1‐1/2” DS2012‐54*Rp2 Female elbow 54mm×Rp2” DS2013‐15*R1/2 Male elbow 15mm×R1/2” DS2013‐18*R1/2 Male elbow 18mm×R1/2” DS2013‐22*R1/2 Male elbow 22mm×R1/2” DS2013‐22*R3/4 Male elbow 22mm×R3/4” DS2013‐28*R1 Male elbow 28mm×R1” DS2013‐35*R1 1/4 Male elbow 35mm×R1‐1/4” DS2013‐42*R1 1/2 Male elbow 42mm×R1‐1/2” DS2013‐54*R2 Male elbow 54mm×R2” DS2014‐15*Rp1/2 Female tee 15mm×Rp1/2” DS2014‐18*Rp1/2 Female tee 18mm×Rp1/2” DS2014‐22*Rp3/4 Female tee 22mm×Rp3/4” DS2014‐28*Rp1/2 Female tee 28mm×Rp1/2 DS2014‐28*Rp1 Female tee 28mm×Rp1” DS2014‐35*Rp1 1/4 Female tee 35mm×Rp1‐1/4” DS2014‐42*Rp1 1/2 Female tee 42mm×Rp1‐1/2” DS2014‐54*Rp2 Female tee 54mm×Rp2” DS2015‐15*R1/2 Male tee 15mm×R1/2” DS2015‐18*R1/2 Male tee 18mm×R1/2” DS2015‐22*R3/4 Male tee 22mm×R3/4” DS2015‐28*R1/2 Male tee 28 mm×R1/2’’ DS2015‐28*R1 Male tee 28mm×R1” DS2015‐35*R1 1/4 Male tee 35mm×R1‐1/4” DS2015‐42*R1 1/2 Male tee 42mm×R1‐1/2” DS2015‐54*R2 Male tee 54mm×R2” DS2016‐18*15 Reducer‐A 18mm×15mm DS2016‐22*15 Reducer‐A 22mm×15mm DS2016‐22*18 Reducer‐A 22mm×18mm DS2016‐28*15 Reducer‐A 28mm×15mm DS2016‐28*18 Reducer‐A 28mm×18mm DS2016‐28*22 Reducer‐A 28mm×22mm DS2016‐35*15 Reducer‐A 35mm×15mm DS2016‐35*18 Reducer‐A 35mm×18mm DS2016‐35*22 Reducer‐A 35mm×22mm DS2016‐35*28 Reducer‐A 35mm×28mm DS2016‐42*15 Reducer‐A 42mm×15mm DS2016‐42*18 Reducer‐A 42mm×18mm DS2016‐42*22 Reducer‐A 42mm×22mm DS2016‐42*28 Reducer‐A 42mm×28mm DS2016‐42*35 Reducer‐A 42mm×35mm DS2016‐54*42 Reducer‐A 54mm×42mm DS20107‐18*15 Reducer Coupling‐B 18mm×15mm DS20107‐22*15 Reducer Coupling‐B 22mm×15mm DS20107‐22*18 Reducer Coupling‐B 22mm×18mm DS20107‐28*15 Reducer Coupling‐B 28mm×15mm DS20107‐28*18 Reducer Coupling‐B 28mm×18mm DS20107‐28*22 Reducer Coupling‐B 28mm×22mm DS20107‐35*15 Reducer Coupling‐B 35mm×15mm DS20107‐35*18 Reducer Coupling‐B 35mm×18mm DS20107‐35*22 Reducer Coupling‐B 35mm×22mm DS20107‐35*28 Reducer Coupling‐B 35mm×28mm DS20107‐42*15 Reducer Coupling‐B 42mm×15mm DS20107‐42*18 Reducer Coupling‐B 42mm×18mm DS20107‐42*22 Reducer Coupling‐B 42mm×22mm DS20107‐42*28 Reducer Coupling‐B 42mm×28mm DS20107‐42*35 Reducer Coupling‐B 42mm×35mm DS20107‐54*15 Reducer Coupling‐B 54mm×15mm DS20107‐54*18 Reducer Coupling‐B 54mm×18mm DS20107‐54*22 Reducer Coupling‐B 54mm×22mm DS20107‐54*28 Reducer Coupling‐B 54mm×28mm DS20107‐54*35 Reducer Coupling‐B 54mm×35mm DS20107‐54*42 Reducer Coupling‐B 54mm×42mm
Manufacturer:
Wenzhou Dunshan EPT Co.,Ltd.
Company Name
Wenzhou Dunshan EPT Co.,Ltd.
Address
Building B, No. 500, Lingde Road, Kunpeng Street, Oujiangkou Industrial Cluster, Wenzhou City, Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval


#2101004

Range of polypropylene push-fit fittings and inserts for use with MDPE pipe (manufactured to BS EN 12201). For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2101004
Expiry date:
31/01/2026
Size:
20mm & 25mm
Marking:
PN, JG and size on body
Installation Requirements:
R001
Model:
UG101B - 20 x 1/2" BSP MALE ADAPTOR UG102B - 25 x 3/4" BSP MALE ADAPTOR UG201B - 20mm EQUAL TEE UG202B - 25mm EQUAL TEE UG222025B - 20 x 25mm STEM ELBOW UG222525B - 25 x 25mm STEM ELBOW UG301B - 20mm EQUAL ELBOW UG302B - 25mm EQUAL ELBOW UG401B - 20mm EQUAL STRAIGHT CONNECTOR UG402B - 25mm EQUAL STRAIGHT CONNECTOR UG4501B - 20 x 1/2" FEMALE ADAPTOR UG4502B - 25 X 3/4" FEMALE ADAPTOR UG4620B - 20mm STOP END UG4625B - 25mm STOP END UG501B - 25 x 20mm REDUCING STRAIGHT CONNECTOR UG801E - 20mm PLUG UG802E - 25mm PLUG UGPWB1514 - 15 x 1/2" WING BACK ELBOW UGPWB2014 - 20 x 1/2" BACK PLATE ELBOW UGPWB2514 - 25 x 1/2" BACK PLATE ELBOW UGPWB2516 - 25 x 3/4" BACK PLATE ELBOW UTS147-DB - 20MM PIPE INSERT UTS197-DB- 25MM PIPE INSERT
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2101045

Range of polypropylene push-fit fittings with inserts for use with MDPE Pipe (manufactured to BS EN 12201-2) on one side of the fitting and PB (BS 7291), PEX (BS 7291) or Copper (BS EN 1057) on the other. Models UTS147-DB, UTS197-DB & UTS251-DB are for above and below ground use. All other models are for above ground use only. Maximum working pressure when using 20mm pipe is 16.0 bar. Maximum working pressure when using 25mm & 32mm pipe is 12.5 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2101045
Expiry date:
31/01/2026
Marking:
PN, JG & size on protective cap.
Installation Requirements:
R001
Model:
Above ground use only. UG601B - 20 x 15MM PE-COPPER COUPLER. UG602B - 25 x 22MM PE-COPPER COUPLER. UG603B - 25 x 15MM PE-COPPER COUPLER. UG604B - 32 x 28MM PE-COPPER COUPLER. UG063228B - 32 X 28MM REDUCER. Above and below ground use. UTS147-DB - 20MM PIPE INSERT UTS197-DB - 25MM PIPE INSERT UTS251-DB - 32MM PIPE INSERT
Factor:
Reliance Worldwide Corporation (UK) Ltd.
Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 (0)1895 449233

View All Listings by this Company

Print This Approval


#2012038

Range of brass press fittings with EPDM ‘O’-rings for use with EN ISO 21003 pipe. Maximum working pressure 10.0 bar. For cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2012038
Expiry date:
31/12/2025
Size:
Please refer to model.
Marking:
RIFENG & Crimp Profiles (U-TH-H) on crimp sleeve.
Installation Requirements:
R001
Model:
Equal Straight Union: F17-S1216x1216, F17-S1620x1620 F17-S2025x2025, F17-S2026x2026, F17-S2632x2632. Unequal Straight Union: F17-S1620x1216 F17-S2025x1216 F17-S2025x1620 F17-S2026x1216 F17-S2026x1620 F17-S2632x1216 F17-S2632x1620 F17-S2632x2025 F17-S2632x2026 Male Straight Union: F17-S1216x3/8 F17-S1216x1/2 F17-S1216x3/4 F17-S1620x1/2 F17-S1620x3/4 F17-S1620x1 F17-S2025x3/4 F17-S2025x1 F17-S2026x3/4 F17-S2026x1 F17-S2632x1 Female Straight Union: F17-S1216x3/8F F17-S1216x1/2F F17-S1216x3/4F F17-S1620x1/2F F17-S1620x3/4F F17-S1620x1F F17-S2025x3/4F F17-S2025x1F F17-S2026x3/4F F17-S2026x1F F17-S2632x1F Equal Elbows: F17-L1216x1216 F17-L1620x1620 F17-L2025x2025 F17-L2026x2026 F17-L2632x2632 Unequal Elbows: F17-L1620*1216 F17-L2025*1216 F17-L2025*1620 F17-L2632*2025 Male Elbows: F17-L1216x3/8 F17-L1216x1/2 F17-L1216x3/4 F17-L1620x1/2 F17-L1620x3/4 F17-L1620x1 F17-L2025x3/4 F17-L2025x1 F17-L2026x3/4 F17-L2026x1 F17-L2632x1 Female Elbows: F17-L1216x3/8F F17-L1216x1/2F F17-L1216x3/4F F17-L1620x1/2F F17-L1620x3/4F F17-L2025x3/4F F17-L2026x3/4F F17-L2025x1F F17-L2632x1F Equal Tees: F17-T1216x1216x1216 F17-T1620x1620x1620 F17-T2025x2025x2025 F17-T2026x2026x2026 F17-T2632x2632x2632 Unequal Tees: F17-T1216x1620x1216 F17-T1216x2025x1216 F17-T1620x1216x1216 F17-T2025x1216x1216 F17-T2026x1216x1216 F17-T2026x1216x1620 F17-T1620x1216x1620 F17-T1620x1620x1216 F17-T1620x2025x1620 F17-T1620x2026x1620 F17-T2025x1216x2025 F17-T2025x1620x1620 F17-T2025x2025x1620 F17-T2025x1620x2025 F17-T2026x1216x2026 F17-T2026x1620x1620 F17-T2026x1620x2026 F17-T2026x2026x1620 F17-T2632x1216x2632 F17-T2632x1620x2632 F17-T2632x2026x2026 F17-T2632x2025x2632 F17-T2632x2026x2632 Female Tee: F17-T1216x3/8Fx1216 F17-T1216x1/2Fx1216 F17-T1620x1/2Fx1620 F17-T1620x3/4Fx1620 F17-T2025x1/2Fx2025 F17-T2025x3/4Fx2025 F17-T2026x1/2Fx2026 F17-T2026x3/4Fx2026 F17-T2632x3/4Fx2632 F17-T2632x1Fx2632 Male tee: F17-T1216x3/8x1216 F17-T1216x1/2x1216 F17-T1620x1/2x1620 F17-T1620x3/4x1620 F17-T2025x1/2x2025 F17-T2025x3/4x2025 Wall-plated female elbow: F17-L1216x3/8F (Z) F17-L1216x1/2F (Z) F17-L1620x1/2F (Z) F17-L1620x3/4F (Z) F17-L2025x3/4F (Z) F17-L2026x3/4F (Z) Demountable female straight union: F17-S1216x3/8F (H) F17-S1216x1/2F (H) F17-S1216x3/4F (H) F17-S1620x1/2F (H) F17-S1620x3/4F (H) F17-S2025x3/4F (H) F17-S2026x3/4F (H) F17-S2632x1F (H) End cap: F17-D1216 F17-D1620 F17-D2025 F17-D2026 F17-D2632
Manufacturer:
Rifeng Enterprise (Foshan) Co. Ltd.
Company Name
Rifeng Enterprise (Foshan) Co. Ltd.
Address
F1 - F14 Building No. 1, Rifeng Road, Leping Town, Sanshui District, Foshan City, Guangdong Province 528318
Country
China

View All Listings by this Company

Print This Approval


#2106010

Range of crimp fittings with a bronze body incorporating EPDM O-rings. For use with copper pipe manufactured to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2106010
Expiry date:
30/06/2026
Size:
See model.
Marking:
Conex Universal Limited logo: >B<, WRAS and size on fitting body.
Installation Requirements:
R001
Model:
HZ Valve adaptor: HZC625101: 15mm crimp joint X ½” BSP (M). HZC625102: 22mm crimp joint X ¾” BSP (M). HZC625103: 28mm crimp joint X 1” BSP (M). HZC625104: 35mm crimp joint X 1 ¼” BSP (M). HZC625105: 42mm crimp joint X 1 ½” BSP (M). HZC625106: 54mm crimp joint X 2” BSP (M).
Factor:
Conex Universal Ltd
Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 121 5772831
General Email
salesuk@ibpgroup.com

View All Listings by this Company
Manufacturer:
IBP Instalfittings sp ZOO
Company Name
IBP Instalfittings sp ZOO
Address
General Email

View All Listings by this Company

Print This Approval


#2107090

Range of SUS316L & SUS304 stainless steel press fittings for use with stainless steel pipe manufactured to EN 10312. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2107090
Expiry date:
31/07/2026
Size:
15mm - 108mm press-fit connections. ½” BSP (F) to 2” BSP (F). ½” BSP (M) to 2” BSP (M).
Marking:
SUMWIN, EN10312 and DN on body
Installation Requirements:
R001
Model:
Straight coupling (press fit) 4111111O, 1111111O, 4111221O, 1111221O, 4111331O, 1111331O, 4111441O, 1111441O, 4111551O, 1111551O, 4111661O, 1111661O, 4111881O, 1111881O, 4111991O, 1111991O, 4111AA1O, 1111AA1O. Reducing coupling (press fit) 4111211O, 1111211O, 4111321O, 1111321O, 4111431O, 1111431O, 4111541O, 1111541O, 4111651O, 1111651O, 4111861O, 1111861O, 4111961O, 1111961O, 4111981O, 1111981O, 4111A81O, 1111A81O, 4111A91O, 1111A91O. Female thread straight coupling (Press fit x BSP (F)) 4113111O, 1113111O, 4113221O, 1113221O, 4113331O, 1113331O, 4113441O, 1113441O, 4113551O, 1113551O, 4113661O, 1113661O, 4113211O, 1113211O, 4113321O, 1113321O, 4113431O, 1113431O, 4113541O, 1113541O, 4113651O, 1113651O. Male thread straight coupling (Press fit x BSP (M)) 4112111O, 1112111O, 4112221O, 1112221O, 4112331O, 1112331O, 4112211O, 1112211O, 4112321O, 1112321O, 4112441O, 1112441O, 4112551O, 1112551O, 4112661O, 1112661O, 4112541O, 1112541O, 4112651O, 1112651O. Flange coupling (Press fit) 41I4111O, 11I4111O, 41I4221O, 11I4221O, 41I4331O, 11I4331O, 41I4441O, 11I4441O, 41I4551O, 11I4551O, 41I4661O, 11I4661O, 41I4881O, 11I4881O, 41I4991O, 11I4991O, 41I4AA1O, 11I4AA1O. 90° elbow (Press fit) 4121111O, 1121111O, 4121221O, 1121221O, 4121331O, 1121331O, 4121441O, 1121441O, 4121551O, 1121551O, 4121661O, 1121661O, 4121881O, 1121881O, 4121991O, 1121991O, 4121AA1O, 1121AA1O. 90° ER reducing elbow (Press fit) 4121211O, 1121211O, 4121321O, 1121321O, 4121431O, 1121431O, 4121541O, 1121541O, 4121651O, 1121651O. 90° ED one-way elbow (Press fit) 4120111O, 1120111O, 4120221O, 1120221O, 4120331O, 1120331O, 4120441O, 1120441O, 4120551O, 1120551O, 4120661O, 1120661O. 90° EFZ Female thread short Elbow (Press fit x BSP (F)) 4124111O, 1124111O, 4124221O, 1124221O, 4124331O, 1124331O, 4124211O, 1124211O, 4124321O, 1124321O. 90° EF Female thread Elbow (Press fit x BSP (F)) 4123111O, 1123111O, 4123221O, 1123221O, 4123331O, 1123331O, 4123441O, 1123441O, 4123551O, 1123551O, 4123661O, 1123661O, 4123211O, 1123211O, 4123321O, 1123321O, 4123431O, 1123431O, 4123541O, 1123541O, 4123651O, 1123651O. EM Male thread Elbow (Press fit x BSP (M)) 4122111O, 1122111O, 4122221O, 1122221O, 4122331O, 1122331O, 4122441O, 1122441O, 4122551O, 1122551O, 4122661O, 1122661O, 4122211O, 1122211O, 4122321O, 1122321O, 4122431O, 1122431O, 4122541O, 1122541O, 4122651O, 1122651O. 45° Elbow (Press fit) 4141111O, 1141111O, 4141221O, 1141221O, 4141331O, 1141331O, 4141441O, 1141441O, 4141551O, 1141551O, 4141661O, 1141661O, 4141881O, 1141881O, 4141991O, 1141991O, 4141AA1O, 1141AA1O. 45° ED one-way Elbow (Press fit) 4140111O, 1140111O, 4140221O, 1140221O, 4140331O, 1140331O, 4140441O, 1140441O, 4140551O, 1140551O, 4140661O, 1140661O. Equal tee (Press fit) 4131111O, 1131111O, 4131221O, 1131221O, 4131331O, 1131331O, 4131441O, 1131441O, 4131551O, 1131551O, 4131661O, 1131661O, 4131881O, 1131881O, 4131991O, 1131991O, 4131AA1O, 1131AA1O. Reducing tee (Press fit) 4131211O, 1131211O, 4131311O, 1131311O, 4131321O, 1131321O, 4131431O, 1131431O, 4131541O, 1131541O, 4131651O, 1131651O, 4131861O, 1131861O, 4131961O, 1131961O, 4131981O, 1131981O, 4131A81O, 1131A81O, 4131A91O, 1131A91O. Female thread Tee (Press fit x BSP (F)) 4133111O, 1133111O, 4133221O, 1133221O, 4133331O, 1133331O, 4133441O, 1133441O, 4133551O, 1133551O, 4133661O, 1133661O, 4133211O, 1133211O, 4133321O, 1133321O, 4133431O, 1133431O, 4133541O, 1133541O, 4133651O, 1133651O. Male thread Tee (Press fit x BSP (M)) 4132111O, 1132111O, 4132221O, 1132221O, 4132331O, 1132331O, 4132441O, 1132441O, 4132551O, 1132551O, 4132661O, 1132661O, 4132211O, 1132211O, 4132321O, 1132321O, 4132431O, 1132431O, 4132541O, 1132541O, 4132651O, 1132651O. Adjustable straight (Press fit) 4116111O, 1116111O, 4116221O, 1116221O, 4116331O, 1116331O, 4116441O, 1116441O, 4116551O, 1116551O, 4116661O, 1116661O, 4116881O, 1116881O, 4116991O, 1116991O, 4116AA1O, 1116AA1O. Hex adaptor (BSP (F) 411L111O, 111L111O, 411L221O, 111L221O, 411L331O, 111L331O, 411L441O, 111L441O, 411L551O, 111L551O, 411L661O, 111L661O. Bridge (Press fit) 411Q111O, 111Q111O, 411Q221O, 111Q221O, 411Q331O, 111Q331O. Cap (Press fit) 4115111O, 1115111O, 4115221O, 1115221O, 4115331O, 1115331O, 4115441O, 1115441O, 4115551O, 1115551O, 4115661O, 1115661O.
Manufacturer:
Guangdong Sumwin New Material Group Co., Ltd.
Company Name
Guangdong Sumwin New Material Group Co., Ltd.
Address
Duichuan Industrial Zone, Yanghe Town, Gaoming Region, Foshan City, Guangdong
Country
China

View All Listings by this Company

Print This Approval


#2106017

Range of press fit fittings incorporating copper (GP5 models) or bronze (GP4 models) bodies and EPDM `O`-rings, for use with copper tube to EN 1057. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2106017
Expiry date:
30/06/2026
Marking:
Taizhou Double Winner logo (dbw in a box) and size on body.
Installation Requirements:
R001
Model:
GP5002 Bend 90: 12 - 54mm. GP5001 Bend 90 i/a: 12 - 54mm. GP5041 Bend 45: 12 - 54mm. GP5040 Bend 45 i/a: 12 - 54mm. GP5270 Straight Coupling: 12 - 54mm. GP5271 Straight Coupling: 12 - 54mm. GP5270S Sleeve Coupling: 12 - 54mm. GP5240 Reducing Coupling: 12 - 54mm. GP5243 Fitting Reducer: 12 - 54mm. GP5130 Equal Tee: 12 - 54mm. GP5301 Cap End: 12 - 54mm. GP5130 Reducing Tee: 12 - 54mm. GP5085 Full Crossover: 15 - 22mm. GP5086 Part Crossover: 15 - 22mm. GP4090 Elbow 90 Female: 15mm x 1/2” BSP (F) - 54mm x 2” BSP (F). GP4471 Wallplate Elbow: 15mm x 1/2” BSP (M) - 22mm x 3/4” BSP (M) GP4092 Elbow 90 Male: 15mm x 1/2” BSP (M) - 54mm x 2” BSP (M). GP4355 Tap Connector: 15mm x 1/2” BSP Captive Nut - 28mm x 1 1/4” BSP Captive Nut. GP4270 Female Adaptor: 15mm x 1/2” BSP (F) - 54mm x 2” BSP (F). GP4243 Male Adaptor: 15mm x 1/2” BSP (M) - 54mm (Crimp Joint) x 2” BSP (M). GP4130 Threaded Tee: 15mm x 1/2” BSP (M) x 15mm - 54mm x 1/2” BSP (M) x 54mm. GP4331 Straight Union: 15mm x 1/2” BSP (M) - 28mm x 1” BSP (M). GP4281 Female Adaptor: 15mm x 1/2” BSP (F) - 22mm x 3/4” BSP (F).
Factor:
Taizhou Double Winners Copper Co Ltd
Company Name
Taizhou Double Winners Copper Co Ltd
Address
Unit B1605 Joyance Tower, Jiaojiang, Taizhou
Country
Zhejiang,

View All Listings by this Company

Print This Approval


#2111701

Unidelta range of compression fittings with polypropylene bodies with EPDM ‘O’ rings for use with PE100 polyethylene pipe (manufactured to EN12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2111701
Expiry date:
30/11/2026
Note:
For above and below ground use
Size:
20mm, 25mm, 32mm, 40mm, 50mm, 63mm
Marking:
Unidelta, pressure rating & size on the compression nut
Installation Requirements:
R001
Model:
Straight coupler (1001) Reducing coupler (1002) Male adapter (1003) Female adapter (1004) 90° Tee (1005) 90° Elbow (1006) 90° Tee with female threaded take off (1007) 90° Elbow with threaded male take off (1008) 90° Elbow with threaded female take off (1009) 90° Tee with threaded male take off (1010) End plug (1012) 90° reducing tee (1013) Repair slip coupler (1014) Female tee with peg fitting (1012) 90° Elbow with lateral thread take off (1023) 90° Tee with increased take off (1029) Wall plate elbow (1034)
Manufacturer:
Unidelta SpA
Company Name
Unidelta SpA
Address
Via Capparola Sotto 4, 25078 Vestone (Brescia)
Country
Italy

View All Listings by this Company

Print This Approval


#2106009

Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2106009
Expiry date:
30/06/2026
Size:
12mm - 108mm.
Marking:
Taizhou Double Winner logo (dbw in a box) and size on body.
Installation Requirements:
R001
Model:
6270 & 6270CP Copper Press Coupling: 12 - 108mm. 6271 & 6271CP Copper Press Coupling: 12 - 54mm. 6240 & 6240CP Reducer press x press: 15mmx12mm - 54mmx42mm. 6243 & 6243CP Reducer x press: 15mmx12mm - 108mm x 88.9mm. 6001& 6001CP Bend 90° x press: 12-108mm. 6002 & 6002CP Bend 90° press x press: 12 - 108mm. 6130 & 6130CP Equal Tee 3 x press: 12 - 108mm. 6040 & 6040CP Bend 45° x press: 12 - 108mm. 6041& 6041CP Bend 45° press x press: 12 - 108mm. 6301 & 6301CP Endcap press: 12 - 108mm. 6131 & 6131CP Reducing Tee 3 x press: 15mmx15mmx12mm - 108mm x 76.1mm x 108mm. 6085 & 6085CP Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 & 6086CP Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 & 6510CP Flange PN16: 76.1mm. Chrome plated models added 02/06/2023
Factor:
Taizhou Double Winners Copper Co Ltd
Company Name
Taizhou Double Winners Copper Co Ltd
Address
Unit B1605 Joyance Tower, Jiaojiang, Taizhou
Country
Zhejiang,

View All Listings by this Company

Print This Approval


#2110321

Range of M type press fittings with TP2 copper bodies and EPDM ‘O’-rings, for use with TP2 copper pipe to EN1057. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2110321
Expiry date:
31/10/2026
Size:
See model.
Marking:
Hailiang and size on body.
Installation Requirements:
R001
Model:
EKYH0000, STRAIGHT COUPLING WITH GROOVE CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0002, SLIP COUPLING CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0003, REDUCING COUPLING CXC: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0004, FITTING REDUCER FXC: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0005, COPPER FEMALE ADAPTOR: S15*1/2FC‐G S22*3/4FC‐G S28*1FC‐G S35*1 1/4FC‐G S42*1 1/2FC‐G S54*2FC‐G Note: FC‐G is female BSPP EKYH0006, COPPER MALE ADAPTOR: S15*1/2MC‐ZG S15*3/4MC‐ZG S22*3/4MC‐ZG S22*1MC‐ZG S28*1MC‐ZG S35*1 1/4MC‐ZG S42*1 1/2MC‐ZG S54*2MC‐ZG Note: MC‐ZG is male BSPT EKYH0012, EXTENDED SLIP COUPLING CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0100, 90DEG ELBOW CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0101, 90DEG STREET ELBOW FTGXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0104, REDUCER ELBOW: 22mm*15mm 28mm*15mm 28mm*22mm EKYH0130, 45DEG ELBOW CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0131, 45DEG STREET ELBOW FTGXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0166, CROSSOVER CXC:15mm, 22mm, 28mm EKYH0167, PART CROSSOVER FTGXC: 15mm, 22mm, 28mm EKYH0201, EQUAL TEE CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0202, REDUCING TEE: 22mm*22mm*15mm 28mm*28mm*15mm 28mm*22mm*15mm 35mm*35mm*15mm 35mm*35mm*22mm 35mm*35mm*28mm 42mm*42mm*15mm 42mm*42mm*22mm 42mm*42mm*28mm 42mm*42mm*35mm 54mm*54mm*15mm 54mm*54mm*22mm 54mm*54mm*28mm 54mm*54mm*35mm 54mm*54mm*42mm 22mm*15mm*15mm 22mm*15mm*22mm 28mm*15mm*15mm 28mm*15mm*22mm 28mm*15mm*28mm 28mm*22mm*15mm 28mm*22mm*22mm 28mm*22mm*28mm 15mm*15mm*22mm 22mm*22mm*28mm EKYH0301, CAP CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Models added September 2023: EKYH0001 STRAIGHT COUPLING WITH DOT CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. EKYH0202 REDUCING TEE: 35mm*22mm*22mm, 35mm*22mm*35mm, 35mm*28mm*35mm, 35mm*28mm*22mm, 35mm*28mm*35mm, 42mm*35mm*35mm. EKYH0005 COPPER FEMALE ADAPTOR: 15mm*3/4", 22mm*1/2", 22mm*1", 28mm*3/4", 35mm*1". EKYH0006 COPPER MALE ADAPTOR: 22mm*1/2", 28mm*3/4", 35mm*1".
Manufacturer:
Zhejiang Hailiang Co Ltd
Company Name
Zhejiang Hailiang Co Ltd
Address
Diankou Zhuji Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2112039

Range of press-fit end connectors (gunmetal bodies) for use with copper pipe manufactured to BS EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2112039
Expiry date:
31/12/2026
Size:
15mm – 54mm compression.
Marking:
Pegler Yorkshire, size and xpress on body.
Installation Requirements:
R001
Model:
‘X press’ range comprising of models: 04305131. 04305132. 04305133. 04305141. 04305146. 04305151. 04305161.
Factor:
Pegler Yorkshire Ltd
Company Name
Pegler Yorkshire Ltd
Address
St Catherines Avenue, Balby Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+44 (0) 844 243 4400

View All Listings by this Company

Print This Approval


#2112337

Range of brass tee fittings for use with copper pipe to EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2112337
Expiry date:
31/12/2026
Size:
See model
Marking:
Aquamatic Products Limited logo (APL) on body.
Installation Requirements:
R001
Model:
B840-1 - 15mm compression x 15mm spigot x 15mm spigot. B841-1 - 22mm compression x 22mm spigot x 22mm spigot.
Factor:
Aquamatic Products Limited
Company Name
Aquamatic Products Limited
Address
Hydestile Stud Hambeldon Road Godalming Surrey
Postcode
GU8 4DE
Country
United Kingdom
Phone
01483 861559
General Email
steve@aquamatic.co.uk

View All Listings by this Company

Print This Approval


#2109058

‘HE-705X & HE-715X’ ranges of brass crimp fit fittings incorporating EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057-2006). HE-7052/7053/7058/7059 & HE-7152/7153/7158/7159 models also incorporate a NBR gasket. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2109058
Expiry date:
30/09/2026
Size:
See model
Marking:
HONGEN, WRAS and size on crimp connection.
Installation Requirements:
R001
Model:
M-type connection: HE-7050 - straight connector - pressfit x BSP (M): 15-54mm x ½”-2”. HE-7051 - straight connector - pressfit x BSP (F): 15-54mm x ½”-2”. HE-7052 - straight connector (with central captive nut and washer) - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7053 - straight connector (with central captive nut and washer) - pressfit x pressfit: 15x15-28x28mm. HE-7054 - 90° elbow - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7055 - 90° elbow - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7056 - 90° wall plate elbow - pressfit x BSP (F): 15-22mm x ½”-¾”. HE-7057 - tee - pressfit x BSP (F) x pressfit: 15-54mm x ½” & 22-28 x ¾”. HE-7058 - straight connector (with central captive nut and washer) - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7059 - straight connector - pressfit x captive nut and washer: 15-28mm x ¾”-1¼”. V-type connection: HE-7150 - straight connector - pressfit x BSP (M): 15-54mm x ½”-2”. HE-7151 - straight connector - pressfit x BSP (F): 15-54mm x ½”-2”. HE-7152 - straight connector (with central captive nut and washer) - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7153 - straight connector (with central captive nut and washer) - pressfit x pressfit: 15x15-28x28mm. HE-7154 - 90° elbow - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7155 - 90° elbow - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7156 - 90° wall plate elbow - pressfit x BSP (F): 15-22mm x ½”-¾”. HE-7157 - tee - pressfit x BSP (F) x pressfit: 15-54mm x ½” & 22-28 x ¾”. HE-7158 - straight connector (with central captive nut and washer) - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7159 - straight connector - pressfit x captive nut and washer: 15-28mm x ¾”-1¼”.
Manufacturer:
YUHUAN HONGEN VALVE CO., LTD
Company Name
YUHUAN HONGEN VALVE CO., LTD
Address
Sanliancun, 317605, Yuhuan, Zhejiang, China

View All Listings by this Company

Print This Approval


#2106049

VSH XPRESS Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2106049
Expiry date:
30/06/2026
Size:
12mm - 108mm.
Marking:
DVGW, XPRESS & SIZE ON BODY
Installation Requirements:
R001
Model:
7001 22, 7002 22, 7001 15, 7002 15, 7040 22, 7130 15 & 7130 22 PRESS FITTINGS 6270 Copper Press Coupling: 12 - 108mm. 6271 Copper Press Coupling: 12 - 54mm. 6240 Reducer press x press: 15mmx12mm - 54mmx42mm. 6243 Reducer x press: 15mmx12mm - 108mm x 88.9mm. 6001 Bend 90° x press: 12-108mm. 6002 Bend 90° press x press: 12 - 108mm. 6130 Equal Tee 3 x press: 12 - 108mm. 6040 Bend 45° x press: 12 - 108mm. 6041 Bend 45° press x press: 12 - 108mm. 6301 Endcap press: 12 - 108mm. 6131 Reducing Tee 3 x press: 15mmx15mmx12mm - 108mm x 76.1mm x 108mm. 6085 Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 Flange PN16: 76.1mm.
Factor:
Aalberts Integrated Piping Systems BV
Company Name
Aalberts Integrated Piping Systems BV
Address
OUDE AMERSFOORTSEWEG 99 1212 AA HILVERSUM PO BOX 498
Country
Netherlands

View All Listings by this Company

Print This Approval


#2201016

Range of PVC-u solvent weld and threaded union fittings incorporating an EPDM ‘O’-ring. For use with PVC-u pipe manufactured to ISO 1452 and DIN 8063. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2201016
Expiry date:
31/01/2027
Note:
This approval does not include solvent cement.
Size:
See model.
Marking:
ERA® (registered trademark of Yonggao Co. Ltd.), size and PN on nut.
Installation Requirements:
R001
Model:
Union UU001: 20mm-110mm Male Union UU002: 20mm-63mm x ¼”-2” BSP (F)
Manufacturer:
ERA Piping (Zhejiang) Co.,Ltd.
Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2201304

‘Xpress’ range of press fit fittings with copper or brass bodies and EPDM ‘O’-rings. For use with copper tube manufactured to EN1057. For above ground ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2201304
Expiry date:
31/01/2027
Size:
see model
Marking:
Brass fittings: Xpress and size on body. Copper fittings: Xpress, size and Kitemark logo on body.
Installation Requirements:
R001
Model:
Code Sl/7270 Sl/72705 SlR/7240 56/7243 S12/7002A S12S/7001A S2/6270G S3/6243G S7/6246G S8/6280G Description Straight coupling Straight coupling slip pattern Straight reducing coupling Reducer Elbow Street elbow Straight female connector Straight male connector Female adaptor Male Adaptor Sizes 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -64mm 15mm -108mm 15mm -54mm 15mm-42mm Copper/ Copper Copper Copper Copper Copper Copper Gunmetal Gunmetal Gunmetal Gunmetal S11/6330 S13/6092G S14/6090G Union coupling Male elbow Female elbow 15mm -54mm 15mm -54mm 15mm -54mm Gunmetal Gunmetal Gunmetal S15/6472G Backplate elbow 15mm - 22mm Gunmetal SlFMF/7510 Composite female metric flange 67mm -108mm Copper SlFMM/7520 Composite female metric flange 67mm -108mm Copper S12R/7002A S15L/6472L Reducing Elbow Elbow 22mm x 15mm ½” and 3/4" Copper Gunmetal 519/7005 Bend 15mm-28mm Copper 521/7041 Obtuse Elbow 12mm-108mm Copper 5215/7040 Obtuse Street Elbow 12mm-108mm Copper 522/7086 Partial Crossover 15, 18 and 22mm Copper 5225/7087 Crossover 15, 18 and 22mm Copper 523/7085 Full Crossover 15, 18 and 22mm Copper 524/7130 Equal Tee 12mm-108mm Copper 525/7130 Tee Reducer Branch 15mm-108mm Copper 526/7130 Tee One End Reducer 15mm-35mm Copper 526/7130 Tee One End And Branch Reducer 15mm-54mm Copper 528/7130 S30/130G 560/7301 Tee Both Ends Reducer Female Branch Tee Stop End 12mm-28mm 12mm-108mm 35mm-54mm Copper Gunmetal Copper 561/7301 Stop End 12mm-108mm Copper S65F/6096G Elbow 12mm-54mm Gunmetal S68FF/6359 S69/6331G S69F/6330G Union Straight Male Union Connector Straight Female Union Connector 15mm-54mm 12mm-54mm 12mm-54mm Gunmetal Gunmetal Gunmetal
Factor:
Aalberts Integrated Piping Systems BV
Company Name
Aalberts Integrated Piping Systems BV
Address
OUDE AMERSFOORTSEWEG 99 1212 AA HILVERSUM PO BOX 498
Country
Netherlands

View All Listings by this Company

Print This Approval


#2203337

Pexal range of brass press fittings with EPDM ‘O’-rings for use with copper pipe EN1057. Model VS0171373 incorporates 90° copper elbow (chrome plated) Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2203337
Expiry date:
31/03/2027
Size:
16mm, 20mm, 26mm
Marking:
Valsir on fitting body
Installation Requirements:
R001
Model:
VS0171311 VS0171312 VS0171313 VS0171107UK VS0171119UK VS0171111UK VS0171117UK VS0171005 VS0171021 VS0171025 VS0171051 VS0171373 VS0171205 VS0171105 VS0171115
Factor:
Valsir Spa
Company Name
Valsir Spa
Address
Localita Merlaro 2, 2507 Vestone (Brescia)
Country
Italy
Phone
+39 365 877011

View All Listings by this Company

Print This Approval


#2201312

>B< Press range of stainless-steel SUS316L fittings for use with 316L stainless steel tube manufactured to EN10312. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2201312
Expiry date:
31/01/2027
Size:
Please refer to model.
Marking:
Conex logo (B) and size on body
Installation Requirements:
R001
Model:
PS4001G – Male Bend PS4001G0150400 – 15 x ½” PS4001G0180400 – 18 x ½” PS4001G0180600 – 18 x ¾” PS4001G0220600 – 22 x ¾” PS4001G0280800 – 28 x 1” PS4001G0351000 – 35 x 1-1/4” PS4001G0421200 – 42 x 1-1/2” PS4001G0541600 – 54 x 2” PS4002G – Female Bend PS4002G0150400 – 15 x ½” PS4002G0180400 – 18 x ½” PS4002G0180600 – 18 X ¾” PS4002G0220600 – 22 x ¾” PS4002G0280800 – 28 x 1” PS4002G0351000 – 35 x 1-1/4” PS4002G0421200 – 42 x 1-1/2” PS4002G0541600 – 54 x 2” PS4090G – Female Street Elbow PS4090G0150400 – 15 x ½” PS4090G0180400 – 18 x ½” PS4090G0220400 – 22 x ½” PS4090G0220600 – 22 x ¾” PS4090G0280800 – 28 x 1” PS4090G0351000 – 35 x 1-1/4” PS4092G – Male Elbow 90° PS4092G0150400 – 15 x ½” PS4092G0180400 – 18 x ½” PS4130G – Female Tee PS4130G0150415 – 15 x 15 x ½” PS4130G0180418 – 18 x 18 x ½” PS4130G0180618 – 18 x 18 x ¾” PS4130G0220422 – 22 x 22 x ½” PS4130G0220622 – 22 x 22 x ¾” PS4130G0280428 – 28 x 28 x ½” PS4130G0280628 – 28 x 28 x ¾” PS4130G0280828 – 28 x 28 x 1” PS4130G0350435 – 35 x 35 x ½” PS4130G0350635 – 35 x 35 x ¾” PS4130G0351035 – 35 x 35 x 1-1/4” PS4130G0420442 – 42 x 42 x ½” PS4130G0420642 – 42 x 42 x ¾” PS4130G0540454 – 54 x 54 x ½” PS4130G0540654 – 54 x 54 x ¾” PS4130G0541654 – 54 x 54 x 2” PS4130G0760676 – 76 x 76 x ¾” PS4130G0761676 – 76 x 76 x 2” PS4130G0890689 – 89 x 89 x ¾” PS4130G0891689 – 89 x 89 x 2” PS4130G10806108 – 108 x 108 x ¾” PS4130G10816108 – 108 x 108 x 2” PS4243G – Male Straight Connector PS4243G0150400 – 15 x ½” PS4243G0180400 – 18 x ½” PS4243G0180600 – 18 x ¾” PS4243G0220400 – 22 x ½” PS4243G0220600 – 22 x ¾” PS4243G0220800 – 22 x 1” PS4243G0280600 – 28 x ¾” PS4243G0280800 – 28 x 1” PS4243G0351000 – 35 x 1-1/4” PS4243G0421200 – 42 x 1-1/2” PS4243G0541600 – 54 x 2” PS4243G0762000 – 76 x 2-1/2” PS4243G0892400 – 89 x 3” PS4243G1083200 – 108 – 4” PS4270G – Female Straight Connector PS4270G0150400 – 15 x ½” PS4270G0180400 – 18 x ½” PS4270G0180600 – 18 x ¾” PS4270G0220400 – 22 x ½” PS4270G0220600 – 22 x ¾” PS4270G0220800 – 22 x 1” PS4270G0280600 – 28 x ¾” PS4270G0280800 – 28 x 1” PS4270G0351000 – 35 x 1-1/4” PS4270G0421200 – 42 x 1-1/2” PS4270G0541600 – 54 x 2” PS4270G0762000 – 76 x 2-1/2” PS4270G0892400 – 89 x 3” PS4275 – Slip Coupler PS4275 0150000 – 15MM PS4275 0180000 – 18MM PS4275 0220000 – 22MM PS4275 0280000 – 28MM PS4275 0350000 – 35MM PS4275 0420000 – 42MM PS4275 0540000 – 54MM PS4275 0760000 – 76MM PS4275 0890000 – 89MM PS4275 1080000 – 108MM PS4330G – Female Straight Adaptor PS4330G0150400 – 15 x ½” PS4330G0150600 – 15 x ¾” PS4330G0180400 – 18 x ½” PS4330G0180600 – 18 x ¾” PS4330G0220600 – 22 x ¾” PS4330G0220800 – 22 x 1” PS4330G0280800 – 28 x 1” PS4330G0351000 – 35 x 1-1/4” PS4330G0421200 – 42 x 1-1/2” PS4330G0541600 – 54 x 2” PS4331G – Male Straight Adaptor PS4331G0150400 – 15 x ½” PS4331G0180400 – 18 x ½” PS4331G0220600 – 22 x ¾” PS4331G0280800 – 28 x 1! PS4331G0351000 – 35 x 1-1/4” PS4331G0421200 – 42 x 1-1/2” PS4331G0541600 – 54 x 2” PS4355 – Flat Face Union PS4355 0150600 – 15 x ¾” PS4355 0180600 – 18 x ¾” PS4355 0220600 – 22 x ¾” PS4355 0220800 – 22 x 1” PS4355 0280800 – 28 x 1” PS4355 0281000 – 28 x 1-1/4” PS4355 0351200 – 35 x 1-1/2” PS4471G – Wallplate Elbow PS4471G0150400 – 15 x ½” PS4471G0180400 – 18 x ½” PS4471G0220600 – 22 x ¾” PS4471G0280800 – 28 x 1” PS5001 – Street Bend PS5001 0150000 – 15MM PS5001 0180000 – 18MM PS5001 0220000 – 22MM PS5001 0280000 – 28MM PS5001 0350000 – 35MM PS5001 0420000 – 42MM PS5001 0540000 – 54MM PS5001 0760000 – 76MM PS5001 0890000 – 89MM PS5002 – Bend PS5002 0150000 – 15MM PS5002 0180000 – 18MM PS5002 0220000 – 22MM PS5002 0280000 – 28MM PS5002 0350000 – 35MM PS5002 0420000 – 42MM PS5002 0540000 – 54MM PS5002 0760000 – 76MM PS5002 0890000 – 89MM PS5002 1080000 – 108MM PS5030 – 90 Street Bend PS5030 0150000 – 15MM PS5030 0180000 – 18MM PS5030 0220000 – 22MM PS5030 0280000 – 28MM PS5030 0350000 – 35MM PS5030 0420000 – 42MM PS5030 0540000 – 54MM PS5040 – 45 Street Bend PS5040 0150000 – 15MM PS5040 0180000 – 18MM PS5040 0220000 – 22MM PS5040 0280000 – 28MM PS5040 0350000 – 35MM PS5040 0420000 – 42MM PS5040 0540000 – 54MM PS5040 0760000 – 76MM PS5040 0890000 – 89MM PS5040 1080000 – 108MM PS5041 – Obtuse Bend PS5041 0150000 – 15MM PS5041 0180000 – 18MM PS5041 0220000 – 22MM PS5041 0280000 – 28MM PS5041 0350000 – 35MM PS5041 0420000 – 42MM PS5041 0540000 – 54MM PS5041 0760000 – 76MM PS5041 0890000 – 89MM PS5041 1080000 – 108MM PS5087 – Cross Short PS5087 0150000 – 15MM PS5087 0180000 – 18MM PS5087 0220000 – 22MM PS5087 0280000 – 28MM PS5130 – Equal Tee PS5130 0151515 – 15MM PS5130 0181818 – 18MM PS5130 0222222 – 22MM PS5130 0282828 – 28MM PS5130 0353535 – 35MM PS5130 0424242 – 42MM PS5130 0545454 – 54MM PS5130 0767676 – 76MM PS5130 0898989 – 89MM PS5130 10800EQ – 108MM PS5130 – Reduced Branch Tee PS5130 0181518 – 18 x 15 x 18 PS5130 0221522 – 22 x 15 x 22 PS5130 0221822 – 22 x 18 x 22 PS5130 0281528 – 28 x 15 x 28 PS5130 0281828 – 28 x 18 x 28 PS5130 0282228 – 28 x 22 x 28 PS5130 0351535 – 35 x 15 x 35 PS5130 0351835 – 35 x 18 x 35 PS5130 0352235 – 35 x 22 x 35 PS5130 0352835 – 35 x 28 x 35 PS5130 0422242 – 42 x 22 x 42 PS5130 0422842 – 42 x 28 x 42 PS5130 0423542 – 42 x 35 x 42 PS5130 0542254 – 54 x 22 x 54 PS5130 0542854 – 54 x 28 x 54 PS5130 0543554 – 54 x 35 x 54 PS5130 0544254 – 54 x 42 x 54 PS5130 0762276 – 76 x 22 x 76 PS5130 0762876 – 76 x 28 x 76 PS5130 0763576 – 76 x 35 x 76 PS5130 0764276 – 76 x 42 x 76 PS5130 0765476 – 76 x 54 x 76 PS5130 0892289 – 89 x 22 x 89 PS5130 0892889 – 89 x 28 x 89 PS5130 0893589 – 89 x 35 x 89 PS5130 0894289 – 89 x 42 x 89 PS5130 0895489 – 89 x 54 x 89 PS5130 0897689 – 89 x 76 x 89 PS5130 10822108 – 108 x 22 x 108 PS5130 10828108 – 108 x 28 x 108 PS5130 10835108 – 108 x 35 x 108 PS5130 10842108 – 108 x 42 x 108 PS5130 10854108 – 108 x 54 x 108 PS5130 10876108 – 108 x 76 x 108 PS5130 10889108 – 108 x 89 x 108 PS5230D – Flange Adapter PS5230D0760000 – 76MM PS5230D0890000 – 89MM PS5230D1080000 – 108MM PS5243 – Fitting Reducer PS5243 0181500 – 18 x 15 PS5243 0221500 – 22 x 15 PS5243 0221800 – 22 x 18 PS5243 0281500 – 28 x 15 PS5243 0281800 – 28 x 18 PS5243 0282200 – 28 x 22 PS5243 0351800 – 35 x 18 PS5243 0352200 – 35 x 22 PS5243 0352800 – 35 x 28 PS5243 0422800 – 42 x 28 PS5243 0423500 – 42 x 35 PS5243 0542800 – 54 x 28 PS5243 0543500 – 54 x 35 PS5243 0544200 – 54 x 42 PS5243 0764200 – 76 x 42 PS5243 0765400 – 76 x 54 PS5243 0894200 – 89 x 42 PS5243 0895400 – 89 x 54 PS5243 0897600 – 89 x 76 PS5243 1085400 – 108 x 54 PS5243 1087600 – 108 x 76 PS5243 1088900 – 108 x 89 PS5270 – Coupler PS5270 0150000 – 15MM PS5270 0180000 – 18MM PS5270 0220000 – 22MM PS5270 0280000 – 28MM PS5270 0350000 – 35MM PS5270 0420000 – 42MM PS5270 0540000 – 54MM PS5270 0760000 – 76MM PS5270 0890000 – 89MM PS5270 1080000 – 108MM PS5301 – Stop End PS5301 0150000 – 15MM PS5301 0180000 – 18MM PS5301 0220000 – 22MM PS5301 0280000 – 28MM PS5301 0350000 – 35MM PS5301 0420000 – 42MM PS5301 0540000 – 54MM PS5301 0760000 – 76MM PS5301 0890000 – 89MM PS5301 1080000 – 108MM
Factor:
Conex Universal Ltd
Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 121 5772831
General Email
salesuk@ibpgroup.com

View All Listings by this Company
Manufacturer:
ZK International Group
Company Name
ZK International Group
Address
NO.678 Dingxiang Road, Binhai Garden,Economic and Technological Development Zone, Wenzhou, Zhejiang
Country
China
General Email

View All Listings by this Company

Print This Approval


#2204071

‘AF’ range of compression fittings with brass or chrome plated brass bodies for use with copper pipe (manufactured to EN1057). The AF14 and AF15 tap connector models incorporate an EPDM washer. Maximum working pressure 16.0 bar. Maximum working temperature 85˚C

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2204071
Expiry date:
30/04/2027
Size:
see model
Marking:
“DOZ” and Size on fitting body
Installation Requirements:
R001
Model:
AF01 couplings-cxc: 6 - 54mm compression. AF01B repair couplings-cxc: 6 - 54mm compression. AF01R reducing couplings cxc: 10 x 8mm compression, 12 x 8mm compression, 15 x 8mm compression, 12 x 10mm compression, 15 x 10mm compression, 15 x 12mm compression, 18 x 12mm compression, 16 x 15mm compression, 22 x 15mm compression, 28 x 15mm compression, 28 x 22mm compression, 35 x 28mm compression, 42 x 35mm compression, 54 x 42mm compression. AF02P female adaptors-parallel: 6mm compression, x ¼" BSP (F), 6mm compression, x ⅜" BSP (F), 8mm compression, x ⅜" BSP (F), 8mm compression, x ¼" BSP (F), 10mm compression, x ¼" BSP (F), 10mm compression, x ⅜" BSP (F), 10mm compression, x ½" BSP (F), 12mm compression, x ¼" BSP (F), 12mm compression, x ⅜" BSP (F), 12mm compression, x ½" BSP (F), 15mm compression, x ¼" BSP (F), 15mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 18mm compression, x ½" BSP (F), 22mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F), 28mm compression, x 1" BSP (F), 28mm compression, x ¾” BSP (F), 35mm compression, x 1-¼" BSP (F), 42mm compression, x 1-½" BSP (F), 54mm compression, x 2" BSP (F). AF03T male adaptors-CxMI taper: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 8mm compression, x ½" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). AF03P male adaptors-CxMI parallel: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 8mm compression, x ½" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). AF03P extended male adaptors-CxMI: 10mm compression, x ⅜" BSP (M), 12mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M). AF04 tank connectors-lug style: 10 - 54mm compression. AF04N tank connectors-nut style: 10 - 54mm compression. AF05 elbows 90 degree-CxC: 6 - 54mm compression. 8 x 6mm compression, 10 x 8mm compression, 12 x 10mm compression, 15 x 12mm compression, 18 x 15mm compression, 22 x 15mm compression, 22 x 18mm compression, 28 x 22mm compression, 35 x 28mm compression, 42 x 35mm compression, 54 x 42mm compression, AF06T male elbows-CxMI taper: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1¼" BSP (M), 42mm compression, x 1½" BSP (M), 54mm compression, x 2" BSP (M). AF06P male elbows-CxMI parallel: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 28mm compression, x 1-¼" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). AF07 female elbows-CxFI parallel: 6mm compression, x ¼" BSP (F), 6mm compression, x ⅜" BSP (F), 8mm compression, x ¼" BSP (F), 8mm compression, x ⅜" BSP (F), 10mm compression, x ¼" BSP (F), 10mm compression, x ½" BSP (F), 10mm compression, x ⅜" BSP (F), 12mm compression, x ¼" BSP (F), 12mm compression, x ⅜" BSP (F), 12mm compression, x ½" BSP (F), 15mm compression, x ¼" BSP (F), 15mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 18mm compression, x ½" BSP (F), 22mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F), 28mm compression, x ¾" BSP (F), 28mm compression, x 1" BSP (F), 28mm compression, x 1-¼" BSP (F), 35mm compression, x 1-¼" BSP (F), 42mm compression, x 1-½" BSP (F), 54mm compression, x 2" BSP (F). AF08 wallplate elbows-CxFI: 12mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x ½" BSP (F), 28mm compression, x 1" BSP (F). AF08 equal tees-CxCxC: 6 - 54mm compression. AF08R reducing tees-CxCxC: 15 x 15 x 10mm compression, 15 x 15 x 22mm compression, 22 x 15 x 15mm compression, 22 x 15 x 22mm compression, 22 x 22 x 15mm compression, 22 x 22 x 28mm compression, 28 x 15 x 28mm compression, 28 x 22 x 28mm compression, 28 x 22 x 22mm compression, 28 x 28 x 15mm compression, 28 x 28 x 22mm compression, 35 x 35 x 15mm compression, 35 x 35 x 22mm compression, AF09 threaded centre teesCxCxFI: 15mm compression, x 15mm compression, x ¼" BSP (F), 15mm compression, x 15mm compression, x ½" BSP (F), 22mm compression, x 22mm compression, x ½" BSP (F), 22mm compression, x 22mm compression, x ¾" BSP (F), 28mm compression, x 28mm compression, x ¾" BSP (F), 28mm compression, x 28mm compression, x 1" BSP (F). AF10 threaded end tees CxFIxC: 15mm compression, x ½" BSP (F) x 15mm compression, 22mm compression, x ¾" BSP (F) x 22mm compression, AF12 stopends-C: 6 - 54mm compression. AF14 straight tap connectors: 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F). AF15 bent tap connectors: 15mm compression, x ½" BSP (F).
Manufacturer:
Hangzhou DOZ Import & Export Co., Ltd
Company Name
Hangzhou DOZ Import & Export Co., Ltd
Address
Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053
Country
China
Phone
86 571 28180555

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.