Fittings for use with Tube and Pipe

Section Code 1180 : Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

Back To Directory Sections

#1904700

‘Tectite 316’ range of push-fit fittings with stainless steel bodies incorporating EPDM ‘O’-rings for use with stainless steel tube (Grade 316 manufactured to EN 10312). Maximum working pressure and operating temperatures: Fittings up to and including 28mm: 20.0 bar @ 30°C, 16.0 bar @ 65°C, 10.0 bar @ 100°C. Fittings over 35mm: 16.0 bar @ 30°C, 10.0 bar @ 65°C, 6.0 bar @ 100°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1904700
Expiry date:
30/04/2024
Size:
15mm – 54mm
Marking:
Tectite 316 & size on 15mm-28mm. Tectite 316, USA & size on 35mm-54mm.
Installation Requirements:
R001
Model:
TS1/TS270 - 15mm to 54mm. TS1 slip /TS270S - 15mm to 28mm. TS2/TS270G - 15mm x ½” BSP (F) to 54mm x 2” BSP (F). TS3/TS243G - 15mm x ½” BSP (M) to 54mm x 2” BSP (M). TS6/TS243 - 18mm x 15mm to 54mm x 42mm. TS12/TS090 - 15mm to 54mm. TS12S/TS092 - 15mm to 28mm. TS13/TS092G- 15mm x ½” BSP (M) to 28mm x 1” BSP (M). TS14/TS090G - 15mm x ½” BSP (F) to 22mm x 1” BSP (F). TS15/TS471G - 15mm x ½” BSP (F) to 22mm x ¾” BSP (F). TS18/TS002A - 15mm to 54mm. TS18S/TS001 - 15mm to 28mm. TS21/TS041 - 15mm to 54mm. TS21S/TX040 - 15mm to 54mm. TS24/TS130 - 15mm to 54mm. TS25/TS130 - 18mm x 18mm x 15mm to 54mm x 54mm x 42mm. TS30/TS130G - 15mm x 15mm x ½” BSP (F) to 42mm x 42mm x ½” BSP (F). TS61/TS301 - 15mm to 54mm.
Manufacturer:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
01302 560560

View All Listings by this Company

Print This Approval


#1904070

Range of brass push-fit fittings incorporating EDPM O-rings. For use with Irish copper pipe Maximum working pressure 16.0 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1904070
Expiry date:
30/04/2024
Marking:
IDC logo: E mark (~E~ within circle) & size on body
Installation Requirements:
R001
Model:
Elbow fitting: 2PAB014, 2PAB021. Pushfit fiting End: 2PAD014, 2PAD021. Pushfit straight fitting: 2PAA014, 2PAA021. Pushfit Straight Pushfit x Pipe: 2PPA142. Pushfit straight reduced Fitting: 2PAA121. Pushfit Tee Fitting: 2PAC014, 2PAC021. Pushfit Tee reduced: 2PAC221, 2PAC212, 2PAC211 Max.
Factor:
IDC Plumbing & Heating Technology (Beijing) Ltd
Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100016
Country
China

View All Listings by this Company
Manufacturer:
IDC FLUID CONTROL CO., LTD
Company Name
IDC FLUID CONTROL CO., LTD
Address
Mechanical & Electronic Industrial Area. C, Yuhuan, Taizhou
Country
Zhejiang,

View All Listings by this Company

Print This Approval


#1904906

Range of Twistloc push-fit fittings with PEX or polysulphone bodies incorporating EPDM ‘O’-rings. The fittings are supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part part 2) and copper pipe. Maximum working pressure and operating temperature: 3.0 bar@92°C, 4.0 bar@82°C & 12.5 bar@20°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1904906
Expiry date:
30/04/2024
Size:
10mm, 15mm, 22mm, 28mm
Marking:
Twisloc logo, TLC & size on body.
Installation Requirements:
R001
Model:
TWISTLOC FITTINGS: SRDE6764M-15mmX1/2"BSP DROP EAR ELBOW SRF6764M- 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M - 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M - 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M - 28mmX1"BSP FEMALE ADAPTOR SPU6711M -10mmX10mm UNION CONNECTOR SPU6766M - 15mmX15mm UNION CONNECTOR SPU6744M - 22mmX22mm UNION CONNECTOR SPU6700M - 28mmX28mm UNION CONNECTOR SPU6761M - 15mmX10mm REDUCING UNION CONNECTOR SPU6746M - 22mmX15mm REDUCING UNION CONNECTOR SRSE6714M - 10mmX1/2"BSP SWIVEL ELBOW UNION (HAND TIGHTEN) SRSE6764M -15mmX1/2"BSP SWIVEL ELBOW UNION (HAND TIGHTEN) SRSE6765M -15mmX3/4"BSP SWIVEL ELBOW UNION (HAND TIGHTEN) SRSE6714BM - 10mmX1/2"BSP SWIVEL ELBOW UNION (BRASS NUT) SRSE6764BM - 15mmX1/2"BSP SWIVEL ELBOW UNION (BRASS NUT) SRSE6765BM -15mmX3/4"BSP SWIVEL ELBOW UNION (BRASS NUT) SPSU6714M - 10mmX1/2"BSP SWIVEL UNION CONNECTOR (HAND TIGHTEN) SRSU6764M - 15mmX1/2"BSP SWIVEL UNION CONNECTOR (HAND TIGHTEN) SRSU6765M - 15mmX3/4"BSP SWIVEL UNION CONNECTOR (HAND TIGHTEN) SPSU6745M - 22mmX3/4"BSP SWIVEL UNION CONNECTOR (HAND TIGHTEN) SPSU6714BM -10mmX1/2"BSP SWIVEL UNION CONNECTOR (BRASS NUT) SRSU6764BM - 15mmX1/2"BSP SWIVEL UNION CONNECTOR (BRASS NUT) SRSU6765BM - 15mmX3/4"BSP SWIVEL UNION CONNECTOR (BRASS NUT) SPSU6745BM - 22mmX3/4"BSP SWIVEL UNION CONNECTOR (BRASS NUT) SPST671M - 10mm TUBE END STOP SPST676M - 15mm TUBE END STOP SPST674M - 22mm TUBE END STOP SRST670M - 28mm TUBE END STOP SPE6711M - 10mmX10mm ELBOW UNION SPE6766M -15mmX15mm ELBOW UNION SPE6744M- 22mmX22mm ELBOW UNION SPE6700M -28mmX28mm ELBOW UNION SPE6761M - 15mmX10mm ELBOW UNION SPE6746M -22mmX15mm ELBOW UNION SPATE6766M -15mm x 15mm 135degree STEM ELBOW SPATE6744M - 22mm x 22mm 135degree STEM ELBOW SPR6716M - 10mmX15mm REDUCING CONNECTOR SPR6764M - 15mmX22mm REDUCING CONNECTOR SPR6760M - 15mmX28mm REDUCING CONNECTOR SPR6740M - 22mmX28mm REDUCING CONNECTOR SPT67111M - 10mmX10mmX10mm TEE UNION SPT67666M - 15mmX15mmX15mm TEE UNION SPT67444M - 22mmX22mmX22mm TEE UNION SPT67000M - 28mmX28mmX28mm TEE UNION SPT67611M - 15mmX10mmX10mm REDUCING TEE UNION SPT67661M - 15mmX15mmX10mm REDUCING TEE UNION SPT67664M -15mmX15mmX22mm REDUCING TEE UNION SPT67466M - 22mmX15mmX15mm REDUCING TEE UNION SPT67464M - 22mmx15mmx22mm REDUCING TEE UNION SPT67441M - 22mmx22mmx10mm REDUCING TEE UNION SPT67446M - 22mmX22mmX15mm REDUCING TEE UNION SPT67044M - 28mmX22mmX22mm REDUCING TEE UNION SPT67040M -28mmX22mmX28mm REDUCING TEE UNION SPT67001M - 28mmX28mmX10mm REDUCING TEE UNION SPT67006M - 28mmX28mmX15mm REDUCING TEE UNION SPT67004M - 28mmX28mmX22mm REDUCING TEE UNION SPTT67441M -22mX22mmX10mm TUBE TEE UNION SPTT67446M - 22mX22mmX15mm TUBE TEE UNION SPTE6711M - 10mmX10mm TUBE ELBOW UNION SPTE6716M - 10mmX15mm TUBE ELBOW UNION SPTE6766M - 15mmX15mm TUBE ELBOW UNION SPTE6744M - 22mmX22mm TUBE ELBOW UNION SRMC6764M -15mmX1/2"BSPT MALE CONNECTOR SRME6764M - 15mmX1/2"BSPT MALE ELBOW SRFWC6741M - 22mmX10mm 4WAY MANIFOLD SRU6766SM - 15mmX15mm SLIP UNION COUPLING SRU6744SM - 22mmX22mm SLIP UNION COUPLING STS10M - 10mm PIPE INSERT STS15M -15mm PIPE INSERT STS22M - 22mm PIPE INSERT STS28M - 28mm PIPE INSERT
Factor:
SNC Corporation
Company Name
SNC Corporation
Address
Chungcheonmacha-Ro Bupyeong-Gu 21301
Country
South Korea

View All Listings by this Company

Print This Approval


#1905333

‘VSH SudoPress’ range of copper or gunmetal press-fit fittings with EPDM ‘O’ rings for use with copper pipe. Joints are achieved by the use of a press fitting tool. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1905333
Expiry date:
31/05/2024
Size:
15mm – 54mm
Marking:
SudoPress on body.
Installation Requirements:
R001
Model:
‘VSH SudoPress’ range
Factor:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
01302 560560

View All Listings by this Company

Print This Approval


#1905363

>B< Sonic range of Brass & Copper push fit fittings incorporating EPDM rubber ‘O’-rings for use with copper pipe. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1905363
Expiry date:
31/05/2024
Size:
See model.
Marking:
>B< and size on fitting body.
Installation Requirements:
R001
Model:
90° elbow (S090): 12 - 22mm. Equal tee (S130): 12x12x12mm - 22x22x22mm. Reducer branch tee (S130): 22x22x15mm. Straight coupler (S270): 12 - 22mm. Models added May 2019: Coupler 10mm - 28mm. Elbow 10mm - 28mm. Street Elbow 15mm. Equal Tee 10mm - 28mm. Tee - Reduced branch 22x22x15, 14x14x12, 16x16x12, 16x16x14 & 18x18x14. Tee - Reduced End & Branch 22x15x15. Tee - Reduced End 22x15x22. Tee - Reduced branch 28x28x22. Reduced Coupler 12x10mm, 14x12mm, 16x12mm & 16x14mm. Fitting Reducer 18x15mm, 22x18mm, 15x12mm, 15x10mm, 22x15mm & 28x22mm. Telescopic Connector - single leg 15mm, 18mm, 22mm & 28mm. Straight Connector – Male 15x1/2", 22x3/4", 28x1.1/4" & 28x1". Straight Connector – Female 15x1/2", 28x1.1/4", 22x3/4" & 28x1". Bent Tap Connector 15x1/2". Straight Tap Connector 15x1/2" Straight Tap Connector 22x3/4" Tee - With Female Branch 15x1/2"x15. Stop End 10mm, 15mm, 18mm & 22mm. Wall Plate Elbow 15x1/2". Models added November 2019: Straight Connector - Female 18x1/2 Straight Connector - Male 18x1/2 Street Elbow - 18mm, 22mm Male Elbow - 15x1/2 Female Elbow - 15x1/2 Reduced Coupler - 18x15, 22x15
Factor:
Conex Universal Ltd
Company Name
Conex Universal Ltd
Address
Global House 95 Vantage Point The Pensnett Estate Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 121 5772831
General Email
salesuk@ibpgroup.com

View All Listings by this Company

Print This Approval


#1905364

“B Profile SS” range of 316L & 304 stainless steel press fittings with EPDM ‘O’-rings for use with stainless steel pipe manufactured to EN 10312. Joints are achieved by the use of a press fitting tool. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1905364
Expiry date:
31/05/2024
Size:
See model
Marking:
IDC & Banninger on body
Installation Requirements:
R001
Model:
BEND: 2SBA011 PS13 15X1/2 2SBA021 PS13 18X1/2 2SBA022 PS13 18X3/4 2SBA032 PS13 22X3/4 2SBA043 PS13 28X1 2SBA054 PS13 35X1.1/4 2SBA065 PS13 42X1.1/2 2SBA077 PS13 54X2 2SBB011 PS14 15X1/2 2SBB021 PS14 18X1/2 2SBB022 PS14 18X3/4 2SBB032 PS14 22X3/4 2SBB043 PS14 28X1 2SBB054 PS14 35X1.1/4 2SBB065 PS14 42X1.1/2 2SBB077 PS14 54X2 2SBN011 PS12 15MM 2SBN022 PS12 18MM 2SBN033 PS12 22MM 2SBN044 PS12 28MM 2SBN055 PS12 35MM 2SBN066 PS12 42MM 2SBN077 PS12 54MM ELBOW: 2SBC011 PS14 15X1/2 2SBC021 PS14 18X1/2 2SBC031 PS14 22X1/2 2SBC032 PS14 22X3/4 2SBC043 PS14 28X1 2SBC054 PS14 35X1.1/4 2SBD011 90 SS 15x1/2MI CRIMP 2SBD021 90 SS 18x1/2MI CRIMP TEE: 2SBE111 PS30 15X15X1/2 2SBE212 PS30 18X18X1/2 2SBE222 PS30 18X18X3/4 2SBE313 PS30 22X22X1/2 2SBE323 PS30 22X22X3/4 2SBE414 PS30 28X28X1/2 2SBE424 PS30 28X28X3/4 2SBE434 PS30 28X28X1 2SBE515 PS30 35X35X1/2 2SBE525 PS30 35X35X3/4 2SBE545 PS30 35X35X1.1/4 2SBE616 PS30 42X42X1/2 2SBE626 PS30 42X42X3/4 2SBE656 PS30 42X42X1.1/2 2SBE717 PS30 54X54X1/2 2SBE727 PS30 54X54X3/4 2SBE777 PS30 54X54X2 STRAIGHT CONNECTOR: 2SBF011 PS3 15X1/2 2SBF021 PS3 18X1/2 2SBF022 PS3 18X3/4 2SBF031 PS3 22X1/2 2SBF032 PS3 22X3/4 2SBF033 PS3 22X1 2SBF042 PS3 28x3/4 2SBF043 PS3 28X1 2SBF054 PS3 35X1.1/4 2SBF065 PS3 42X1.1/2 2SBF077 PS3 54X2 2SBG011 PS2 15X1/2 2SBG021 PS2 18X1/2 2SBG022 PS2 18X3/4 2SBG031 PS2 22X1/2 2SBG032 PS2 22X3/4 2SBG033 PS2 22X1 2SBG042 PS2 28X3/4 2SBG043 PS2 28X1 2SBG054 PS2 35X1.1/4 2SBG065 PS2 42X1.1/2 2SBG077 PS2 54X2 2SBI011 PS69F 15X1/2 2SBI012 PS69F 15X3/4 2SBI021 PS69F 18X1/2 2SBI022 PS69F 18X3/4 2SBI032 PS69F 22X3/4F 2SBI033 PS69F 22X1 2SBI043 PS69F 28X1 2SBI054 PS69F 35X1.1/4 2SBI065 PS69F 42X1.1/2 2SBI077 PS69F 54X2 2SBJ011 PS69 15X1/2 2SBJ021 PS69 18X1/2 2SBJ032 PS69 22X3/4 2SBJ043 PS69 28X1 2SBJ054 PS69 35X1.1/4 2SBJ065 PS69 42X1.1/2 2SBJ077 PS69 54X2 SLIP COUPLER 2SBH011 PS1S 15MM 2SBH022 PS1S 18MM 2SBH033 PS1S 22MM 2SBH044 PS1S 28MM 2SBH055 PS1S 35MM 2SBH066 PS1S 42MM 2SBH077 PS1S 54MM FLAT FACE UNION: 2SBK012 PS43 15x3/4 2SBK022 PS43 18x3/4 2SBK032 PS43 22x3/4 2SBK033 PS43 22x1 2SBK043 PS43 28x1 2SBK044 PS43 28x1.1/4 2SBK055 PS43 35x1.1/2 WALL PLATE ELBOW 2SBL011 PS44 15x1/2 2SBL021 PS44 18x1/2 2SBL032 PS44 22x3/4 2SBL043 PS44 28x1 STREET BEND: 2SBM011 P12S 15MM 2SBM022 P12S 18MM 2SBM033 P12S 22MM 2SBM044 P12S 28MM 2SBM055 P12S 35MM 2SBM066 P12S 42MM 2SBM077 P12S 54MM 90DEG STREET BEND: 2SC7011 PS50 15MM 2SC7022 PS50 18MM 2SC7033 PS50 22MM 2SC7044 PS50 28MM 2SC7055 PS50 35MM 2SC7066 PS50 42MM 2SC7077 PS50 54MM 45DEG ST BEND: 2SBO011 PS21S 15MM 2SBO022 PS21S 18MM 2SBO033 PS21S 22MM 2SBO044 PS21S 28MM 2SBO055 PS21S 35MM 2SBO066 PS21S 42MM 2SBO077 PS21S 54MM OBTUSE BEND: 2SBP011 PS21 15MM 2SBP022 PS21 18MM 2SBP033 PS21 22MM 2SBP044 PS21 28MM 2SBP055 PS21 35MM 2SBP066 PS21 42MM 2SBP077 PS21 54MM CROSS SHORT: 2SC8011 PS51 15MM 2SC8022 PS51 18MM 2SC8033 PS51 22MM 2SC8044 PS51 28MM 2SC9011 PS52 15MM 2SC9022 PS52 18MM 2SC9033 PS52 22MM 2SC9044 PS52 28MM EQUAL TEE: 2SBQ111 PS24 15MM 2SBQ222 PS24 18MM 2SBQ333 PS24 22MM 2SBQ444 PS24 28MM 2SBQ555 PS24 35MM 2SBQ666 PS24 42MM 2SBQ777 PS24 54MM RB TEE 2SBQ212 PS25 18X18X15 2SBQ313 PS25 22X22X15 2SBQ323 PS25 22X22X18 2SBQ414 PS25 28X28X15 2SBQ424 PS25 28X28X18 2SBQ434 PS25 28X28X22 2SBQ515 PS25 35X35X15 2SBQ525 PS25 35X35X18 2SBQ535 PS25 35X35X22 2SBQ545 PS25 35X35X28 2SBQ636 PS25 42X42X22 2SBQ646 PS25 42X42X28 2SBQ656 PS25 42X42X35 2SBQ737 PS25 54X54X22 2SBQ747 PS25 54X54X28 2SBQ757 PS25 54X54X35 2SBQ767 PS25 54X54X42 FITTED REDUCER: 2SBR021 PS6 18X15 2SBR031 PS6 22X15 2SBR032 PS6 22X18 2SBR041 PS6 28X15 2SBR042 PS6 28X18 2SBR043 PS6 28X22 2SBR052 PS6 35X18 2SBR053 PS6 35X22 2SBR054 PS6 35X28 2SBR064 PS6 42X28 2SBR065 PS6 42X35 2SBR074 PS6 54X28 2SBR075 PS6 54X35 2SBR076 PS6 54X42 COUPLER: 2SBS011 PS1 15MM 2SBS022 PS1 18MM 2SBS033 PS1 22MM 2SBS044 PS1 28MM 2SBS055 PS1 35MM 2SBS066 PS1 42MM 2SBS077 PS1 54MM STOP END: 2SBT011 PS61 15MM 2SBT022 PS61 18MM 2SBT033 PS61 22MM 2SBT044 PS61 28MM 2SBT055 PS61 35MM 2SBT066 PS61 42MM 2SBT077 PS61 54MM Models added May 2022: STRAIGHT CONNECTOR: 2SBF010L - 15mmx3/8"M 2SBF010 - 15mmx3/8"M 2SBF012L - 15mmx3/4"M 2SBF012 - 15mmx3/4"M 2SBF044L - 28mmx11/4"M 2SBF044 - 28mmx11/4"M 2SBF051L - 35mmx1/2"M 2SBF051 - 35mmx1/2"M 2SBF053L - 35mmx1"M 2SBF053 - 35mmx1"M 2SBF055L - 35mmx1.1/2"M 2SBF055 - 35mmx1.1/2"M 2SBF064L - 42mmx11/4"M 2SBF064 - 42mmx11/4"M 2SBF075L - 54mmx1.1/2"M 2SBF075 - 54mmx1.1/2"M 2SBG010L - 15mmx3/8"F 2SBG010 - 15mmx3/8"F 2SBG041L - 28mmx1/2"F 2SBG041 - 28mmx1/2"F 2SBG044L - 28mmx1.1/4"F 2SBG044 - 28mmx1.1/4"F 2SBG053L - 35mmx1"F 2SBG053 - 35mmx1"F 2SBG055L - 35mmx1.1/2"F 2SBG055 - 35mmX1.1/2"F 2SBG064L - 42mmX1.1/4"F 2SBG064 - 42mmX1.1/4"F 2SBG075L - 54mmx1.1/2"F 2SBG075 - 54mmx1.1/2"F 2SBR051L - 35mmx15mm 2SBR051 - 35mmX15mm 2SBR061L - 42mmx15mm 2SBR061 - 42mmx15mm 2SBR063L - 42mmx22mm 2SBR063 - 42mmx22mm 2SBR071L - 54mmx15mm 2SBR071 - 54mmx15mm 2SBR072L - 54mmx22mm 2SBR072 - 54mmx22mm CROSS TWO LEVELS: 2SBV011L - 15mm 2SBV011 - 15mm 2SBV021L - 18mmx15mm 2SBV021 - 18mmx15mm 2SBV031L - 22mmx15mm 2SBV031 - 22mmx15mm 2SBV032L - 22mmx18mm 2SBV032 - 22mmx18mm 2SBV041L - 28mmx15mm 2SBV041 - 28mmx15mm 2SBV042L - 28mmx18mm 2SBV042 - 28mmx18mm REDUCED COUPLER: 2SBS021L - 18x15mm 2SBS021 - 18x15mm 2SBS031L - 22x15mm 2SBS031 - 22x15mm 2SBS032L - 22x18mm 2SBS032 - 22x18mm 2SBS041L - 28x15mm 2SBS041 - 28x15mm 2SBS042L - 28x18mm 2SBS042 - 28x18mm 2SBS043L - 28x22mm 2SBS043 - 28x22mm 2SBS053L - 35x22mm 2SBS053 - 35x22mm 2SBS054L - 35x28mm 2SBS054 - 35x28mm 2SBS063L - 42x22mm 2SBS063 - 42x22mm 2SBS064L - 42x28mm 2SBS064 - 42x28mm 2SBS065L - 42x35mm 2SBS065 - 42x35mm 2SBS074L - 54x28mm 2SBS074 - 54x28mm 2SBS075L - 54x35mm 2SBS075 - 54x35mm 2SBS076L - 54x42mm 2SBS076 - 54x42mm Models ending L = SS316L stainless steel, models without L suffix = SS304 stainless steel. SS316L stainless steel models are for use with SS316L stainless steel pipe manufactured to EN 10312, with dimension of pipe: O.D. x wall thickness 15mmx1mm 18mmx1mm 22mmx1.2mm 28mmx1.2mm 35mmx1.5mm 42mmx1.5mm 54mmx1.5mm SS304 stainless steel models are for use with SS304 stainless steel pipe manufactured to EN 10312, with dimension of pipe: O.D. x wall thickness 15mmx1mm 18mmx1mm 22mmx1.2mm 28mmx1.2mm 35mmx1.5mm 42mmx1.5mm 54mmx1.5mm
Factor:
Ningbo IDC International Trading Co. Ltd.
Company Name
Ningbo IDC International Trading Co. Ltd.
Address
Floor 43, Building A, International Trade Center, Ningbo Chamber of Commerce, No. 558 of Taikangzhong Road, Yinzhou District, Ningbo
Country
China

View All Listings by this Company
Manufacturer:
Zhejiang Banninger Piping System Ltd.
Company Name
Zhejiang Banninger Piping System Ltd.
Address
Bingang INUSTRIAL CITY YUHUAN ZHEJIANG

View All Listings by this Company

Print This Approval


#1904911

Range of Flomasta push-fit fittings with PEX or polysulphone bodies incorporating EPDM ‘O’-rings. The fittings are supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part part 2) and copper pipe. Maximum working pressure and operating temperature: 3.0 bar@92°C, 4.0 bar@82°C & 12.5 bar@20°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1904911
Expiry date:
30/04/2024
Size:
10mm, 15mm, 22mm, 28mm
Marking:
Twisloc logo, TLC & size on body.
Installation Requirements:
R001
Model:
Flomasta FITTINGS: SRDE6764M-15mmX1/2"BSP DROP EAR ELBOW SRF6764M- 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M - 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M - 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M - 28mmX1"BSP FEMALE ADAPTOR SPU6711M -10mmX10mm UNION CONNECTOR SPU6766M - 15mmX15mm UNION CONNECTOR SPU6744M - 22mmX22mm UNION CONNECTOR SPU6700M - 28mmX28mm UNION CONNECTOR SPU6761M - 15mmX10mm REDUCING UNION CONNECTOR SPU6746M - 22mmX15mm REDUCING UNION CONNECTOR SRSE6714M - 10mmX1/2"BSP SWIVEL ELBOW UNION (HAND TIGHTEN) SRSE6764M -15mmX1/2"BSP SWIVEL ELBOW UNION (HAND TIGHTEN) SRSE6765M -15mmX3/4"BSP SWIVEL ELBOW UNION (HAND TIGHTEN) SRSE6714BM - 10mmX1/2"BSP SWIVEL ELBOW UNION (BRASS NUT) SRSE6764BM - 15mmX1/2"BSP SWIVEL ELBOW UNION (BRASS NUT) SRSE6765BM -15mmX3/4"BSP SWIVEL ELBOW UNION (BRASS NUT) SPSU6714M - 10mmX1/2"BSP SWIVEL UNION CONNECTOR (HAND TIGHTEN) SRSU6764M - 15mmX1/2"BSP SWIVEL UNION CONNECTOR (HAND TIGHTEN) SRSU6765M - 15mmX3/4"BSP SWIVEL UNION CONNECTOR (HAND TIGHTEN) SPSU6745M - 22mmX3/4"BSP SWIVEL UNION CONNECTOR (HAND TIGHTEN) SPSU6714BM -10mmX1/2"BSP SWIVEL UNION CONNECTOR (BRASS NUT) SRSU6764BM - 15mmX1/2"BSP SWIVEL UNION CONNECTOR (BRASS NUT) SRSU6765BM - 15mmX3/4"BSP SWIVEL UNION CONNECTOR (BRASS NUT) SPSU6745BM - 22mmX3/4"BSP SWIVEL UNION CONNECTOR (BRASS NUT) SPST671M - 10mm TUBE END STOP SPST676M - 15mm TUBE END STOP SPST674M - 22mm TUBE END STOP SRST670M - 28mm TUBE END STOP SPE6711M - 10mmX10mm ELBOW UNION SPE6766M -15mmX15mm ELBOW UNION SPE6744M- 22mmX22mm ELBOW UNION SPE6700M -28mmX28mm ELBOW UNION SPE6761M - 15mmX10mm ELBOW UNION SPE6746M -22mmX15mm ELBOW UNION SPATE6766M -15mm x 15mm 135degree STEM ELBOW SPATE6744M - 22mm x 22mm 135degree STEM ELBOW SPR6716M - 10mmX15mm REDUCING CONNECTOR SPR6764M - 15mmX22mm REDUCING CONNECTOR SPR6760M - 15mmX28mm REDUCING CONNECTOR SPR6740M - 22mmX28mm REDUCING CONNECTOR SPT67111M - 10mmX10mmX10mm TEE UNION SPT67666M - 15mmX15mmX15mm TEE UNION SPT67444M - 22mmX22mmX22mm TEE UNION SPT67000M - 28mmX28mmX28mm TEE UNION SPT67611M - 15mmX10mmX10mm REDUCING TEE UNION SPT67661M - 15mmX15mmX10mm REDUCING TEE UNION SPT67664M -15mmX15mmX22mm REDUCING TEE UNION SPT67466M - 22mmX15mmX15mm REDUCING TEE UNION SPT67464M - 22mmx15mmx22mm REDUCING TEE UNION SPT67441M - 22mmx22mmx10mm REDUCING TEE UNION SPT67446M - 22mmX22mmX15mm REDUCING TEE UNION SPT67044M - 28mmX22mmX22mm REDUCING TEE UNION SPT67040M -28mmX22mmX28mm REDUCING TEE UNION SPT67001M - 28mmX28mmX10mm REDUCING TEE UNION SPT67006M - 28mmX28mmX15mm REDUCING TEE UNION SPT67004M - 28mmX28mmX22mm REDUCING TEE UNION SPTT67441M -22mX22mmX10mm TUBE TEE UNION SPTT67446M - 22mX22mmX15mm TUBE TEE UNION SPTE6711M - 10mmX10mm TUBE ELBOW UNION SPTE6716M - 10mmX15mm TUBE ELBOW UNION SPTE6766M - 15mmX15mm TUBE ELBOW UNION SPTE6744M - 22mmX22mm TUBE ELBOW UNION SRMC6764M -15mmX1/2"BSPT MALE CONNECTOR SRME6764M - 15mmX1/2"BSPT MALE ELBOW SRFWC6741M - 22mmX10mm 4WAY MANIFOLD SRU6766SM - 15mmX15mm SLIP UNION COUPLING SRU6744SM - 22mmX22mm SLIP UNION COUPLING STS10M - 10mm PIPE INSERT STS15M -15mm PIPE INSERT STS22M - 22mm PIPE INSERT STS28M - 28mm PIPE INSERT
Factor:
Kingfisher Plc.
Company Name
Kingfisher Plc.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX
Phone
+44 (0) 20 7372 8008

View All Listings by this Company
Manufacturer:
SNC Corporation
Company Name
SNC Corporation
Address
Chungcheonmacha-Ro Bupyeong-Gu 21301
Country
South Korea

View All Listings by this Company

Print This Approval


#1906106

Tectite Classic and Tectite Pro ranges of DZR brass push-fit fittings The Tectite Classic range is for use with copper tube (manufactured to BS 2871) and PEX & polybutylene tube (manufactured to BS 2871). The fittings are supplied with plastic inserts. The Tectite Pro range is for use with copper tube (manufactured to BS 2871). Maximum working pressures & operating temperatures: Tectite Classic fittings with copper pipe: 16.0 bar @ 30°C, 10.0 bar @ 65°C & 6.0 bar @ 95°C. Tectite Classic fittings with PEX & Polybutylene: 12.0 bar @ 20°C, 6.0 bar @ 65°C & 3.0 bar @ 92°C. Tectite Pro fittings (15mm - 28mm): 20.0 bar @ 30°C, 16.0 bar @ 65°C & 10.0 bar 114°C. Tectite Pro fittings (32mm - 54mm): 16.0 @ 30°C, 10.0 bar 65°C & 6.0 bar @ 90°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1906106
Expiry date:
30/06/2024
Size:
10mm – 54mm
Marking:
Tectite, size & CR on fitting body.
Installation Requirements:
R001
Model:
Tectite Classic and Tectite Pro ranges
Factor:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
01302 560560

View All Listings by this Company

Print This Approval


#1906080

Profipress & Sanpress ranges of gunmetal, copper or bronze (press-fit) fittings, with EPDM `O` rings. For use with copper tube (manufactured to BS EN 1057). Sizes 64mm – 108mm incorporate a stainless-steel grab ring. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1906080
Expiry date:
30/06/2024
Size:
12,15,18, 22, 28, 35, 42, 54mm XL sizes 64, 66.7, 76.1, 88.9, 108 mm.
Marking:
Viega, size, DVGW on body
Installation Requirements:
R001
Model:
Profipress & Sanpress ranges consisting of: Elbows: 2416, 2416XL, 2416.1, 2416.1XL, 2426, 2426XL, 2426.1, 2426.1XL, 2427, 2428. T-pieces: 2418, 2418.1, 2418XL, 2417.2XL. Adapter pieces: 2411XL,2412XL Couplings: 2415, 2415XL, 2415.3, 2415.5XL Reductions: 2415.1, 2415.1XL, 2415.2, 2416.2, 2426.2. Caps & plugs: 2456, 2456XL, 2456.1XL, 2457. Flanges: 2459.5XL. Gunmetal CC499K or CC246E/CuSi4Zn9MnP Elbows: 2216, 2216.1, 2226, 2226.1. T-pieces: 2218, 2217.1, 2217.2, 2217.4. Adapter pieces: 2211, 2211.1, 2211.2, 2211.4, 2212, 2212.1, 2212.2, 2212.3, 2214, 2214.1, 2214.2, 2214.3, 2215.6. Couplings: 2215, 2215.5, 2215.4. Reductions: 2215.1. Screw fittings: 2260, 2262, 2265, 2255, 2263, 2264, 2267. Flanges: 2259.5. Wall plates: 2225, 2225.5, 2225.6, 2228.7, 2217.3. Wall lead-ins: 2232.1, 2232.3. Cross pieces: 2244, 2247, 2248. Mounting units: 2221, 2221.1, 2222, 2222.6EX, 2222.05, 2222.2, 2229. Compensator: 2251.
Factor:
Viega GmbH & Co KG
Company Name
Viega GmbH & Co KG
Address
Viega Platz 1, D-57439 Attendorn
Country
Germany

View All Listings by this Company

Print This Approval


#1907009

Press-Inox range of stainless-steel crimped fittings with EPDM ‘O’ rings for use with stainless steel pipe (manufactured to EN10204). For above ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1907009
Expiry date:
31/07/2024
Size:
15mm - 108mm
Marking:
PI (abbreviation of Press-Inox) on body of fitting
Installation Requirements:
R001
Model:
Press-Inox range of fittings
Factor:
Anpro Pressfit PTE. Ltd
Company Name
Anpro Pressfit PTE. Ltd
Address
130 Second Lok Yang Road Singapore

View All Listings by this Company

Print This Approval


#1907036

Range of R-154 stainless steel pressed collars incorporating stainless steel bodies and are only to be used with stainless steel pipe. Maximum working pressure for sizes up to DN150 is 25.0 bar. Maximum working pressure for size DN200 is 16.0 bar. Maximum operating temperature 99°C

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1907036
Expiry date:
31/07/2024
Size:
DN 40 to DN 200
Marking:
Model, NORDS, size, material grading and pressure rating on fitting body
Installation Requirements:
R001
Model:
FCM0604420DHS. FCM0404420DHS. FCM0605420DHS. FCM0405420DHS. FCM0606920DHS. FCM0406920DHS. FCM0608420DHS. FCM0408420DHS. FCM0610630SPE. FCM0410630SPE. FCM0613130DHS. FCM0413130DHS. FCM0615630SPE. FCM0415630SPE. FCI0604820DHS. FCI0404820DHS. FCI0606020DHS. FCI0406020DHS. FCI0607620DHS. FCI0407620DHS. FCI0608820DHS. FCI0408820DHS. FCI0611430SPE. FCI0411430SPE. FCI0613930DHS. FCI0413930DHS. FCM0620630DHS. FCM0420630DHS. FCI0616826DHS. FCI0416826DHS. FCI0621930DHS. FCI0421930DHS.
Manufacturer:
Nords International AB
Company Name
Nords International AB
Address
Prostgaardsvagen 2 SE 655 60 MOLKOLM Sweden

View All Listings by this Company

Print This Approval


#1907050

Range of metric black, white or grey DMFit plastic pushfit fittings with EPDM ‘O’-rings for use with metric PEX barrier pipe manufactured to BS7291-2. Supplied with grey pipe inserts. Maximum operating parameters: 12.0 bar @cold water use only and 7.0 bar @ 65°C

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1907050
Expiry date:
31/07/2024
Note:
R008 applies to the white fittings only. The pipe inserts must be used when installing this system to maintain the validity of the approval
Size:
10, 15 & 22mm.
Marking:
DM and size on the fittings
Installation Requirements:
R001 R008
Model:
AFWC2210M: 22mm tube x 10mm tube, AMC1004M: 10mm tube x ¼” BSPT, AMC1006M: 10mm tube x ⅜” BSPT, AMC1007M: 10mm tube x ½” BSPT, AMC1506M: 15mm tube x ⅜” BSPT, AMC1507M: 15mm tube x ½” BSPT, AMC2209M: 22mm tube x ¾” BSPT, AEU1010M: 10mm tube x 10mm tube, AEU1515M: 15mm tube x 15mm tube, AEU2215M: 22mm tube x 15mm tube, AEU2222M: 22mm tube x 22mm tube, AME1004M: 10mm tube x ¼” BSPT, AME1006M: 10mm tube x ⅜” BSPT, AME1506M: 15mm tube x ⅜” BSPT, AME1507M: 15mm tube x ½” BSPT, AMES1004M: 10mm tube x ¼” BSPT, AMES1006M: 10mm tube x ⅜” BSPT, ARD1015M: 10mm tube x 15mm stem, ARD1522M: 15mm tube x 22mm stem, ATEU1010M: 10mm tube x 10mm stem, ATEU1515M: 15mm tube x 15mm tube, SATEU6766B: 15mm tube x 15mm tube (Long), ATEU2222M: 22mm tube x 22mm tube, AFA1004M: 10mm x ¼” BSPT, AFA1507M: 15mm x ½” BSPT, AFA1509M: 15mm x ¾” BSPT, AFA2209M: 22mm x ¾” BSPT, AFAUN101/2VM: 10mm x 1/2-16 UN, AMRS1004M: 10mm tube x ¼” BSPT, AMRS1006M: 10mm tube x ⅜” BSPT, AMRS1007M: 10mm tube x ½” BSPT, AMTS1004M: 10mm tube x ¼” BSPT, AMTS1006M: 10mm tube x ⅜” BSPT, AMTS1007M: 10mm tube x ½” BSPT, ASA1004M: 10mm stem x ¼” BSPT, ASA1006M: 10mm stem x ⅜” BSPT, ASA1007M: 10mm stem x ½” BSPT, ACR1010M: 10mm tube, ATU101010M: 10mm tube, ATU151010M: 15mm run x 10mm run x 10mm branch, ATU151510M: 15mm run x 15mm run x 10mm branch, ATU151515M: 15mm tube, ATU151522M: 15mm run x 15mm run x 22mm branch, ATU221515M: 22mm run x 15mm run x 15mm branch, ATU222210M: 22mm run x 22mm run x 10mm branch, ATU222215M: 22mm run x 22mm run x 15mm branch, ATU221522M: 22mm run x 15mm run x 22mm branch, ATU222222M: 22mm tube, AUB1010M: 10mm tube, AUB1515M: 15mm tube, AUB2222M: 22mm tube, AUC1010M: 10mm tube x 10mm tube, AUC1510M: 15mm tube x 10mm tube, AUC1515M: 15mm tube x 15mm tube, AUC2215M: 22mm tube x 15mm tube, AUC2222M: 22mm tube x 22mm tube, ATWD1010M: 10mm in & out, ATWD1515M: 15mm in & out, ATES10M: 10mm tube, ATES15M: 15mm tube, ATES22M: 22mm tube, APL10M: 10mm plug, APL15M: 15mm plug, APL22M: 22mm plug, AEL1510M: 10mm stem - 15mm tube, AEL2215M: 15mm stem - 22mm tube, ABU1010M: 10mm tube x 10mm tube, ABBC1507M: 15mm tube x ½" barb, ABBC2207M: 22mm tube x ½" barb, ABBC2209M: 22mm tube x ¾" barb, ABBC1510M: 15mm tube x 10mm barb, ABBC15M09: 15mm tube x 9mm barb, ABBC15M10: 15mm tube x 10mm barb, ABBC15M13: 15mm tube x 13mm barb, AEL15M07: ½" stem x 15mm tube, ASSA15M06: 15mm stem x ⅜" stem, ATBC15M06: 15mm stem x ⅜" barb, ATBC15M07: 15mm stem x ½" barb, ATC15M: 15mm tube, ATC22M: 22mm tube, Grey pipe Inserts: ATS10M: 10mm x 7mm, ATS15M: 15mm x 11.4mm, ATS22M: 22mm x 17.6mm. Models Added July 2020: AMC1002M: 10mm tube x ⅛” BSPT AEU2216M: 22mm tube x 16mm tube ARD1012M: 10mm tube x 12mm stem ARD1518M: 15mm tube x 18mm stem AMCB1004M: 10mm tube x ¼” BSP(P) AMCB1006M: 10mm tube x ⅜” BSP(P) AMCB1007M: 10mm tube x ½” BSP(P) AMCB1507M: 15mm tube x ½” BSP(P) AMCB1509M: 15mm tube x ¾” BSP(P) AMCB2209M: 22mm tube x ¾” BSP(P) AMESB1004M: 10mm tube x ¼” BSP(P) AMESB1006M: 10mm tube x ⅜” BSP(P) AMESB1007M: 10mm tube x ½” BSP(P) ATEU1012M: 10mm tube x 12mm stem AFA1002M: 10mm x 1/8” BSPT AFA2211M: 22mm x 1” BSPT AFAUN121/2VM: 12mm x 1/2-16 UN AFAUF107/16CM: 10mm x 7/16-20UNF-Cone Type AFAU107/16CM: 10mm x 7/16-24 UNS AFAB1006CM: 10mm tube x ⅜” BSP(P) Cone Type AFAB1007CM: 10mm tube x ½” BSP(P) Cone Type AFAB1008CM: 10mm tube x 5/8” BSP(P) Cone Type AFAB1004FM: 10mm tube x ¼” BSP(P) Flat Type AFAB1009FM: 10mm tube x ¾” BSP(P) Flat Type AFAB1209FM: 12mm tube x ¾” BSP(P) Flat Type AFAB1007FM: 10mm tube x ½” BSP(P) Flat Type AFAB1008FM: 10mm tube x 5/8” BSP(P) Flat Type AFAB1009FM: 10mm tube x ¾” BSP(P) Flat Type AFAB1507M: 15mm tube x ½” BSP(P) AFAB1509M: 15mm tube x ¾” BSP(P) AFAB2209M: 22mm tube x ¾” BSP(P) AFAUF107/16VM: 10mm x 7/16-20UNF-V Type AFAUF105/8VM: 10mm x 5/8-18UNF-V Type AMRSB1004M: 10mm tube x ¼” BSP(P) AMRSB1006M: 10mm tube x ⅜” BSP(P) AMRSB1007M: 10mm tube x ½” BSP(P) AMTSB1206M: 12mm tube x ⅜” BSP(P) AMTSB1207M: 12mm tube x ½” BSP(P) AOC1006M: 10mm tube x 6mm tube AMTS1004M: 10mm tube x ¼” BSPT AMTS1006M: 10mm tube x ⅜” BSPT AMTS1007M: 10mm tube x ½” BSPT ASAB1004M: 10mm stem x ¼” BSP(P) ASAB1006M: 10mm stem x ⅜” BSP(P) ASAB1007M: 10mm stem x ½” BSP(P) ASAB1506M: 15mm stem x ⅜” BSP(P) ASAB1507M: 15mm stem x ½" BSP(P) ASAB2207M: 22mm stem x ½" BSP(P) ASAB2209M: 22mm stem x ¾” BSP(P) ACR1212M: 12mm tube ATHWD1210M: 12mm tube x 10mm tube ATU151512M: 15mm run x 15mm run x 12mm branch ATU221616M: 22mm run x 16mm run x 16mm branch ATU222216M: 22mm run x 22mm run x 16mm branch AUC1512M: 15mm tube x 12mm tube AUC2216M: 22mm tube x 16mm tube ATWD1012M: 10mm in & 12mm out AEL1510M: 10mm stem - 15mm tube AEL1610M: 10mm stem - 16mm tube ABU1212M: 12mm tube ABBC1607M: 16mm tube x ½" barb ABBC1201M: 12mm tube x 10mm barb ABBC1610M: 16mm tube x 10mm barb ACM15M06: 15mm x ⅜" x ⅜" manifold APSUC15M07: 15mm power x ½" tube ARD0615M: 15mm stem x ⅜" tube ARD1512M: 15mm stem x 12mm tube AEL16M07: 16mm x ½" tube AEL18M07: ½" stem x 18mm tube ATU15M0606: 15mm tube x ⅜" tube x ⅜" tube ATU1515M06: 15mm tube x 15mm tube x ⅜" tube ATU1616M07: 16mm tube x 16mm tube x ½" tube ATU18M0606: 18mm run x ⅜" run x ⅜" branch AUC12M06: 12mm tube x ⅜" tube AUC15M04: 15mm tube x ¼" tube AUC15M07: 15mm tube x ½" tube ASEU1507M: 15mm tube x 1/2"BSP(P) ASEU1509M: 15mm tube x 3/4"BSP(P) ASUC1507M: 15mm tube x 1/2"BSP(P) ASUC1509M: 15mm tube x 3/4"BSP(P) ASUC2209M: 22mm tube x 3/4"BSP(P) AEFCB1507M: 15mm tube x 1/2"BSP(P) ASFCB1507M: 15mm tube x 1/2"BSP(P) ASFCB1509M: 15mm tube x 3/4"BSP(P) ASFCB2209M: 22mm tube x 3/4"BSP(P)
Factor:
The Fluidconnections Co. (UK) Ltd
Company Name
The Fluidconnections Co. (UK) Ltd
Address
Rufford House, Darwin Drive, Sherwood Energy Village
Postcode
NG22 9GW
Country
New Ollerton,
Phone
+44 (0) 1623 836 814

View All Listings by this Company
Manufacturer:
DMT
Company Name
DMT
Address
143B-3L Namdong-Gu Incheon
Country
Korea

View All Listings by this Company

Print This Approval


#1909015

Range of copper crimped fittings with EPDM ‘O’-rings (except for 149ENM, 303ENM and 304ENM models) for use with copper pipe. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1909015
Expiry date:
30/09/2024
Size:
12mm - 108mm.
Marking:
Zhuji City Howhi Air Conditioners Made Co., Ltd. Logo and size on body.
Installation Requirements:
R001
Model:
100ENM - Copper Press Straight Coupling PxP: 100ENM12AB - 12mm 100ENM15AB - 15mm 100ENM18AB - 18mm 100ENM22AB - 22mm 100ENM28AB - 28mm 100ENM35AB - 35mm 100ENM42AB - 42mm 100ENM54AB - 54mm 100ENM67AB - 66.7mm 100ENM76AB - 76.1mm 100ENM89AB - 88.9mm 100ENM108AB - 108mm 101ENM - Copper Press Reducing Coupling PxP: 101ENM1512AB - 15mm×12mm 101ENM1514AB - 15mm×14mm 101ENM1615AB - 16mm×15mm 101ENM1812AB - 18mm×12mm 101ENM1815AB - 18mm×15mm 101ENM1817AB - 18mm×17mm 101ENM2215AB - 22mm×15mm 101ENM2218AB - 22mm×18mm 101ENM2815AB - 28mm×15mm 101ENM2818AB - 28mm×18mm 101ENM2822AB - 28mm×22mm 101ENM3522AB - 35mm×22mm 101ENM3528AB - 35mm×28mm 101ENM4222AB - 42mm×22mm 101ENM4228AB - 42mm×28mm 101ENM4235AB - 42mm×35mm 101ENM5428AB - 54mm×28mm 101ENM5435AB - 54mm×35mm 101ENM5442AB - 54mm×42mm 102ENM - Copper Press Fitting Reducer FTGxP: 102ENM1512AB - 15mm×12mm 102ENM1812AB - 18mm×12 mm 102ENM1815AB - 18mm×15mm 102ENM2215AB - 22mm×15mm 102ENM2218AB - 22mm×18mm 102ENM2815AB - 28mm×15mm 102ENM2818AB - 28mm×18mm 102ENM2822AB - 28mm×22mm 102ENM3522AB - 35mm×22 mm 102ENM3528AB - 35mm×28 mm 102ENM4222AB - 42mm×22mm 102ENM4228AB - 42mm×28mm 102ENM4235AB - 42mm×35mm 102ENM5428AB - 54mm×28mm 102ENM5435AB - 54mm×35mm 102ENM5442AB - 54mm×42mm 102ENM6728AB - 66.7mm×28mm 102ENM6735AB - 66.7mm×35mm 102ENM6742AB - 66.7mm×42mm 102ENM6754AB - 66.7mm×54mm 102ENM7635AB - 76.1mm×35mm 102ENM7642AB - 76.1mm×42mm 102ENM7654AB - 76.1mm×54mm 102ENM7667AB - 76.1mm×66.7mm 102ENM8954AB - 88.9mm×54mm 102ENM8976AB - 88.9mm×76.1mm 102ENM10842AB - 108mm×42mm 102ENM10854AB - 108mm×54mm 102ENM10867AB - 108mm×66.7mm 102ENM10876AB - 108mm×76.1mm 102ENM10889AB - 108mm×88.9mm 103ENM - Copper Press Elbow - 90°PxP: 103ENM12AB - 12mm 103ENM15AB - 15mm 103ENM18AB - 18mm 103ENM22AB - 22mm 103ENM28AB - 28mm 103ENM35AB - 35mm 103ENM42AB - 42mm 103ENM54AB - 54mm 103ENM67AB - 66.7mm 103ENM76AB - 76.1mm 103ENM89AB - 88.9mm 103ENM108AB - 108mm 104ENM - Copper Press Elbow - 90°(Male / Female) FTGxP: 104ENM12AB - 12mm 104ENM15AB - 15mm 104ENM18AB - 18mm 104ENM22AB - 22mm 104ENM28AB - 28mm 104ENM35AB - 35mm 104ENM42AB - 42mm 104ENM54AB - 54mm 104ENM67AB - 66.7mm 104ENM76AB - 76.1mm 104ENM89AB - 88.9mm 104ENM108AB - 108mm 107ENM - Copper Press Elbow - 45°PxP: 107ENM12AB - 12mm 107ENM15AB - 15mm 107ENM18AB - 18mm 107ENM22AB - 22mm 107ENM28AB - 28mm 107ENM35AB - 35mm 107ENM42AB - 42mm 107ENM54AB - 54mm 107ENM67AB - 66.7mm 107ENM76AB - 76.1mm 107ENM89AB - 88.9mm 107ENM108AB - 108mm 108ENM - Copper Press Elbow - 45°(Male / Female) FTGxP: 108ENM12AB - 12mm 108ENM15AB - 15mm 108ENM18AB - 18mm 108ENM22AB - 22mm 108ENM28AB - 28mm 108ENM35AB - 35mm 108ENM42AB - 42mm 108ENM54AB - 54mm 108ENM67AB - 66.7mm 108ENM76AB - 76.1mm 108ENM89AB - 88.9mm 108ENM108AB - 108mm 111ENM - Copper Press Slip Extended Coupling PxP: 111ENM12AL - 12mm 111ENM15AL - 15mm 111ENM18AL - 18mm 111ENM22AL - 22mm 111ENM28AL - 28mm 111ENM35AL - 35mm 111ENM42AL - 42mm 111ENM54AL - 54mm 111ENM67AL - 66.7mm 111ENM76AL - 76.1mm 111ENM89AL - 88.9mm 111ENM108AL - 108mm 112ENM - Copper Press Equal Tee PxPxP: 112ENM12AB - 12mm 112ENM15AB - 15mm 112ENM18AB - 18mm 112ENM22AB - 22mm 112ENM28AB - 28mm 112ENM35AB - 35mm 112ENM42AB - 42mm 112ENM54AB - 54mm 112ENM67AB - 66.7mm 112ENM76AB - 76.1mm 112ENM89AB - 88.9mm 112ENM108AB - 108mm 113ENM - Copper Press Unequal Tee PxPxP: 113ENM151512AB - 15mm×15mm×12mm 113ENM181812AB - 18mm×18mm×12mm 113ENM181815AB - 18mm×18mm×15mm 113ENM222212AB - 22mm×22mm×12mm 113ENM222215AB - 22mm×22mm×15mm 113ENM222218AB - 22mm×22mm×18mm 113ENM282815AB - 28mm×28mm×15mm 113ENM282818AB - 28mm×28mm×18mm 113ENM282822AB - 28mm×28mm×22mm 113ENM353515AB - 35mm×35mm×15mm 113ENM353522AB - 35mm×35mm×22mm 113ENM353528AB - 35mm×35mm×28mm 113ENM424215AB - 42mm×42mm×15mm 113ENM424222AB - 42mm×42mm×22mm 113ENM424228AB - 42mm×42mm×28mm 113ENM424235AB - 42mm×42mm×35mm 113ENM545415AB - 54mm×54mm×15mm 113ENM545422AB - 54mm×54mm×22mm 113ENM545428AB - 54mm×54mm×28mm 113ENM545435AB - 54mm×54mm×35mm 113ENM545442AB - 54mm×54mm×42mm 113ENM676728AB - 66.7mm×66.7mm×28mm 113ENM676735AB - 66.7mm×66.7mm×35mm 113ENM676742AB - 66.7mm×66.7mm×42mm 113ENM676754AB - 66.7mm×66.7mm×54mm 113ENM767622AB - 76.1mm×76.1mm×22mm 113ENM767628AB - 76.1mm×76.1mm×28mm 113ENM767635AB - 76.1mm×76.1mm×35mm 113ENM767642AB - 76.1mm×76.1mm×42mm 113ENM767654AB - 76.1mm×76.1mm×54mm 113ENM767667AB - 76.1mm×76.1mm×66.7mm 113ENM898954AB - 88.9mm×88.9mm×54mm 113ENM898976AB - 88.9mm×88.9mm×76.1mm 113ENM10810854AB - 108mm×108mm×54mm 113ENM10810867AB - 108mm×108mm×66.7mm 113ENM10810876AB - 108mm×108mm×76.1mm 113ENM10810889AB - 108mm×108mm×89mm 114ENM151212AB - 15mm×12mm×12mm 114ENM151215AB - 15mm×12mm×15mm 114ENM181515AB - 18mm×15mm×15mm 114ENM181518AB - 18mm×15mm×18mm 114ENM221515AB - 22mm×15mm×15mm 114ENM221518AB - 22mm×15mm×18mm 114ENM221522AB - 22mm×15mm×22mm 114ENM221818AB - 22mm×18mm×18mm 114ENM221822AB - 22mm×18mm×22mm 114ENM281528AB - 28mm×15mm×28mm 114ENM282215AB - 28mm×22mm×15mm 114ENM282222AB - 28mm×22mm×22mm 114ENM282228AB - 28mm×22mm×28mm 114ENM352822AB - 35mm×28mm×22mm 114ENM352828AB - 35mm×28mm×28mm 114ENM423542AB - 42mm×35mm×42mm 114ENM542854AB - 54mm×28mm×54mm 115ENM - Copper Press Unequal Tee PxPxP: 115ENM151522AB - 15mm×15mm×22mm 121ENM - Copper Press Reducing Elbow - 90°PxP: 121ENM2215AB - 22mm×15mm 137ENM - Copper Press End Cap P: 137ENM12AB - 12mm 137ENM15AB - 15mm 137ENM18AB - 18mm 137ENM22AB - 22mm 137ENM28AB - 28mm 137ENM35AB - 35mm 137ENM42AB - 42mm 137ENM54AB - 54mm 137ENM67AB - 66.7mm 137ENM76AB - 76.1mm 137ENM89AB - 88.9mm 137ENM108AB - 108mm 138ENM - Copper Press Full crossover P x P: 138ENM15AB - 15mm 138ENM18AB - 18mm 138ENM22AB - 22mm 148ENM - Copper Press Partial crossover FTGxP: 148ENM12AB - 12mm 148ENM15AB - 15mm 148ENM18AB - 18mm 148ENM22AB - 22mm 149ENM - Copper Press Street crossover FTGxFTG: 149ENM15AB - 15mm 149ENM18AB - 18mm 149ENM22AB - 22mm 301ENM - Copper Press Adapter - male thread P x R: 301ENM1210AB - 12mm×3/8" 301ENM1213AB - 12mm×1/2" 301ENM1510AB - 15mm×3/8" 301ENM1513AB - 15mm×1/2" 301ENM1519AB - 15mm×3/4" 301ENM1813AB - 18mm×1/2" 301ENM1819AB - 18mm×3/4" 301ENM2213AB - 22mm×1/2" 301ENM2219AB - 22mm×3/4" 301ENM2225AB - 22mm×1" 301ENM2819AB - 28mm×3/4" 301ENM2825AB - 28mm×1" 301ENM2832AB - 28mm×1-1/4" 301ENM3525AB - 35mm×1" 301ENM3532AB - 35mm×1-1/4" 301ENM4232AB - 42mm×1-1/4" 301ENM4238AB - 42mm×1-1/2" 301ENM5451AB - 54mm×2" 301ENM6764AB - 66.7mm×2-1/2" 301ENM7664AB - 76.1mm×2-1/2" 301ENM7676AB - 76.1mm×3" 301ENM8976AB - 88.9mm×3" 301ENM108102AB - 108mm×4" 302ENM - Copper Press Adapter - Female thread P x Rp: 302ENM1210AB - 12mm×3/8" 302ENM1213AB - 12mm×1/2" 302ENM1510AB - 15mm×3/8" 302ENM1513AB - 15mm×1/2" 302ENM1519AB - 15mm×3/4" 302ENM1819AB - 18mm×3/4" 302ENM2213AB - 22mm×1/2" 302ENM2219AB - 22mm×3/4" 302ENM2225AB - 22mm×1" 302ENM2819AB - 28mm×3/4" 302ENM2825AB - 28mm×1" 302ENM3532AB - 35mm×1-1/4" 302ENM4238AB - 42mm×1-1/2" 302ENM5451AB - 54mm×2" 302ENM6764AB - 66.7mm×2-1/2" 302ENM7664AB - 76.1mm×2-1/2" 302ENM7676AB - 76.1mm×3" 302ENM8976AB - 88.9mm×3" 302ENM108102AB - 108mm×4" 303ENM - Copper Press Adapter - male thread FTG x R: 303ENM1513AB - 15mm×1/2" 303ENM2213AB - 22mm×1/2" 303ENM2219AB - 22mm×3/4" 304ENM - Copper Press Adapter - Female thread FTG x Rp: 304ENM1513AB - 15mm×1/2" 304ENM2213AB - 22mm×1/2" 304ENM2219AB - 22mm×3/4" 304ENM3525AB - 35mm×1" 304ENM5451AB - 54mm×2" 313ENM - Copper Press Adapter Tee - female thread on branch P x P x Rp: 313ENM121213AB - 12mm×12mm×1/2" 313ENM151513AB - 15mm×15mm×1/2" 313ENM181813AB - 18mm×18mm×1/2" 313ENM222213AB - 22mm×22mm×1/2" 313ENM222219AB - 22mm×22mm×3/4" 313ENM282813AB - 28mm×28mm×1/2" 313ENM282819AB - 28mm×28mm×3/4" 313ENM353513AB - 35mm×35mm×1/2" 313ENM424213AB - 42mm×42mm×1/2" 313ENM545413AB - 54mm×54mm×1/2" 314ENM - Copper Press Adapter 90° Elbow - male thread P x R: 314ENM1513AB - 15mm×1/2" 314ENM1813AB - 18mm×1/2" 314ENM2219AB - 22mm×3/4" 314ENM2825AB - 28mm×1" 315ENM1513AB - 15mm×1/2" 315ENM1813AB - 18mm×1/2" 315ENM2219AB - 22mm×3/4" 315ENM2825AB - 28mm×1"
Manufacturer:
Zhuji City Howhi Air Conditioners Made Co Ltd
Company Name
Zhuji City Howhi Air Conditioners Made Co Ltd
Address
Donggong Village, Yangmeiqiao Community, Diankou Diankou Town, Zhuji City, Shaoxing City, Zhejiang Province, China

View All Listings by this Company

Print This Approval


#1909382

Range of push-fit fittings with polypropylene bodies and NBR seals for use with copper, BS7291 polybutylene and PEX pipe. Cold water use only. Maximum working pressure 16.0 bar.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1909382
Expiry date:
30/09/2024
Note:
Above ground use only
Size:
See Model
Marking:
Plasson and size on body
Installation Requirements:
R001
Model:
1001CU - Copper coupler: 20mm x 15mm - 32mm x 28mm. 1001M - Metric/imperial coupler: 20mm x ½” - 32mm x 1”. 1001U - Coupling: 20mm x 20mm - 63mm x 63mm. 1002C - Copper pipe male adaptor: - 15mm x ¾” - 28mm x 1”. 1002G - Male meter adaptor: 15mm - ¾”. 1002U - Male adaptor: 20mm x ½” - 63mm x 2”. 1003C - Female copper adaptor: 15mm x ¾” - 22mm x ¾”. 1003U - Male adaptor: 20mm x ½” - 63mm x 2”. 1004U - Tee: 20mm x 20mm x 20mm - 63mm x 63mm x 63mm. 1005M - Metric/Imperial elbow: 25mm x ½” - 25mm x ¾”. 1005U - Elbow: 20mm x 20mm - 63mm x 63mm. 1011U - Reducing coupler: 25mm x 20mm - 63mm x 50mm. 1012 - End plug: 20mm - 32mm. 1012U - End plug: 40mm - 63mm. 1014U - Female tee: 25mm x ¾” x 25mm - 32mm x 1” x 32mm. 1015U - Female elbow: 20mm x ½” - 32mm x 1”. 1034U - Reducing tee: 25mm x 20mm x 25mm - 32mm x 25mm x 32mm. 1051U - Reducing elbow 25mm x 20mm. 1075U - Wall plate elbow: 20mm x ½” - 25mm x ¾”. 1085U - Male elbow: 20mm x ½” - 63mm x 2”. 8
Factor:
Plasson UK Ltd
Company Name
Plasson UK Ltd
Address
Plasson House 27 Albert Drive Burgess Hill
Postcode
RH15 9TN
Country
West Sussex
Phone
+44 (0) 1444 244 446
General Email
sales@plasson.co.uk

View All Listings by this Company

Print This Approval


#1904077

Range of brass Pushtite fittings incorporating EDPM O-rings. For use with Irish copper pipe Maximum working pressure 16.0 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1904077
Expiry date:
30/04/2024
Marking:
EXCEL IND & SIZE ON COLLAR/BODY
Installation Requirements:
R001
Model:
PUSHTITE ELBOW: PT1512, PT1534. PUSHTITE STOP END: PT5112, PT5134. PUSHTITE STRAIGHT COUPLING: PT1012, PT1034. PUSHTITE REDUCER x Pipe: PT483412. PUSHTITE EQUAL TEE: PT1812, PT1834. PUSHTITE REDUCING TEE: PT183412, PT18341234 & PT18341212.
Factor:
Excel Industries Ltd
Company Name
Excel Industries Ltd
Address
Coolmine Industrial Estate Clonsilla Road Dublin 15
Postcode
D15N704
Country
Ireland
Phone
+35 31811 8701
General Email
stephen.hope@excel-industries.com

View All Listings by this Company

Print This Approval


#1912019

Fluidfit range of black, grey and white push-fit fittings with plastic bodies, incorporating EPDM ‘O’ rings. For use with LLDPE tube (manufactured to DIN 8072). Maximum working pressures: 4 - 8mm & 5/32” - 5/16” models = 16.0 bar. 10 – 12mm & ⅜” – ½” = 10.0 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1912019
Expiry date:
31/12/2024
Note:
R008 applies to the white fittings only
Size:
4mm, 5mm, 6mm, 8mm, 10mm & 12mm. 5/32”, 3/16”, 1/4”, 5/16”, 3/8” & ½”.
Marking:
CDC & size on collet
Installation Requirements:
R001 R008
Model:
Fluidfit range
Manufacturer:
CDC Pneumatics Corp.
Company Name
CDC Pneumatics Corp.
Address
30, 1-Gil, Secheon-no, Dasa-eup, Dalseong-gun, Daegu (Saecheon-ri) 42921
Country
South Korea
Phone
+82 533547501

View All Listings by this Company

Print This Approval


#1912026

Archung series, ‘N.U’ range of S30408 & S31603 stainless steel crimp fit fittings with EPDM ‘O’-rings, for use with stainless steel pipe manufactured to EN10312. Joints are achieved by the use of a press fitting tool. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1912026
Expiry date:
31/12/2024
Size:
Crimp and flange connections: 18mm - 108mm. BSP connections: ½” - 2”.
Marking:
N.U. (trademark of Shenzhen Archung Technology Co., Ltd.), size and material type on fitting body.
Installation Requirements:
R001
Model:
Archung series - “N.U” range (S304/S316L08 s/steel fittings end in S304/S316L, S31603 fittings end in S316L): Straight coupling: N.U00S018S304/S316L/S316L: 18mm, N.U00S022S304/S316L: 22mm, N.U00S028S304/S316L: 28mm, N.U00S035S304/S316L: 35mm, N.U00S042S304/S316L: 42mm, N.U00S054S304/S316L: 54mm, N.U00S076S304/S316L: 76.1mm, N.U00S089S304/S316L: 88.9mm, N.U00S108S304/S316L: 108mm. Reducing coupling: N.U0SR2218S304/S316L: 22x18mm, N.U0SR2822S304/S316L: 28x22mm, N.U0SR3528S304/S316L: 35x28mm, N.U0SR4235S304/S316L: 42X35mm, N.U0SR5442S304/S316L: 54X42mm, N.U0SR7654S304/S316L: 76.1X54mm, N.U0SR8954S304/S316L: 88.9X54mm, N.U0SR8976S304/S316L: 88.9X76.1mm, N.U0SR10876S304/S316L: 108X76.1mm, N.U0SR10889S304/S316L: 108X88.9mm. Female thread Straight coupling: N.U0SF18050S304/S316L: 18mmX1/2” BSP (F), N.U0SF22075S304/S316L: 22mmX3/4” BSP (F), N.U0SF28100S304/S316L: 28mmX1” BSP (F), N.U0SF35125S304/S316L: 35mmX11/4” BSP (F), N.U0SF42150S304/S316L: 42mmX11/2” BSP (F), N.U0SF54200S304/S316L: 54mmX2” BSP (F). Female thread Reducing Straight coupling: N.USRF22050S304/S316L: 22mmX1/2” BSP (F), N.USRF28075S304/S316L: 28mmX3/4” BSP (F), N.USRF35100S304/S316L: 35mmX1” BSP (F), N.USRF42125S304/S316L: 42mmX11/4” BSP (F), N.USRF54150S304/S316L: 54mmX11/2” BSP (F). Male thread Straight coupling A: N.U0SM18050S304/S316L: 18mmX1/2” BSP (M), N.U0SM22075S304/S316L: 22mmX3/4” BSP (M), N.U0SM28100S304/S316L: 28mmX1” BSP (M). Male thread Reducing coupling A: N.USRM22050S304/S316L: 22mmX1/2” BSP (M), N.USRM28075S304/S316L: 28mmX3/4” BSP (M). Male thread Straight coupling B: N.U0SM35125S304/S316L: 35mmX11/4” BSP (M), N.U0SM42150S304/S316L: 42mmX11/2” BSP (M), N.U0SM54200S304/S316L: 54mmX2” BSP (M). Male thread Reducing coupling B: N.USRM42125S304/S316L: 42mmX11/4” BSP (M), N.USRM54150S304/S316L: 54mmX11/2” BSP (M). Flange coupling: N.U0SL018S304/S316L: 18mm, N.U0SL022S304/S316L: 22mm, N.U0SL028S304/S316L: 28mm, N.U0SL035S304/S316L: 35mm, N.U0SL042S304/S316L: 42mm, N.U0SL054S304/S316L: 54mm, N.U0SL076S304/S316L: 76.1mm, N.U0SL089S304/S316L: 88.9mm, N.U0SL108S304/S316L: 108mm. 90° Elbow: N.U90E018S304/S316L: 18mm, N.U90E022S304/S316L: 22mm, N.U90E028S304/S316L: 28mm, N.U90E035S304/S316L: 35mm, N.U90E042S304/S316L: 42mm, N.U90E054S304/S316L: 54mm, N.U90E076S304/S316L: 76.1mm, N.U90E089S304/S316L: 88.9mm, N.U90E108S304/S316L: 108mm. 90° ER reducing Elbow: N.U90ER2218S304/S316L: 22X18mm, N.U90ER2822S304/S316L: 28X22mm, N.U90ER3528S304/S316L: 35X28mm, N.U90ER4235S304/S316L: 42X35mm, N.U90ER5442S304/S316L: 54X42mm. 90° ED One-way Elbow: N.U90ED018S304/S316L: 18mm, N.U90ED022S304/S316L: 22mm, N.U90ED028S304/S316L: 28mm, N.U90ED035S304/S316L: 35mm, N.U90ED042S304/S316L: 42mm, N.U90ED054S304/S316L: 54mm. 90° EFZ Female thread short Elbow: N.U90EFZ18050S304/S316L: 18mmX1/2” BSP (F), N.U90EFZ22075S304/S316L: 22mmX3/4” BSP (F), N.U90EFZ28100S304/S316L: 28mmX1” BSP (F). ERFZ Female thread short reducing Elbow: N.U90ERFZ22050S304/S316L: 22mmX1/2” BSP (F), N.U90ERFZ28075S304/S316L: 28mmX3/4” BSP (F). 90° EF Female thread Elbow: N.U90EF18050S304/S316L: 18mmX1/2” BSP (F), N.U90EF22075S304/S316L: 22mmX3/4” BSP (F), N.U90EF28100S304/S316L: 28mmX1” BSP (F), N.U90EF35125S304/S316L: 35mmX11/4” BSP (F), N.U90EF42150S304/S316L: 42mmX11/2” BSP (F), N.U90EF54200S304/S316L: 54mmX2” BSP (F). 90° ERF Female thread reducing Elbow: N.U90ERF22050S304/S316L: 22mmX1/2” BSP (F), N.U90ERF28075S304/S316L: 28mmX3/4” BSP (F), N.U90ERF35100S304/S316L: 35mmX1” BSP (F), N.U90ERF42125S304/S316L: 42mmX11/4” BSP (F), N.U90ERF54150S304/S316L: 54mmX11/2” BSP (F). 90° EM Male thread Elbow: N.U90EM18050S304/S316L: 18mmX1/2” BSP (M), N.U90EM22075S304/S316L: 22mmX3/4” BSP (M), N.U90EM28100S304/S316L: 28mmX1” BSP (M), N.U90EM35125S304/S316L: 35mmX11/4” BSP (M), N.U90EM42150S304/S316L: 42mmX11/2” BSP (M), N.U90EM54200S304/S316L: 54mmX2” BSP (M). 90° ERM Male thread reducing Elbow: N.U90ERM22050S304/S316L: 22mmX1/2” BSP (M), N.U90ERM28075S304/S316L: 28mmX3/4” BSP (M), N.U90ERM35100S304/S316L: 35mmX1” BSP (M), N.U90ERM42125S304/S316L: 42mmX11/4” BSP (M), N.U90ERM54150S304/S316L: 54mmX11/2” BSP (M). 45° Elbow: N.U45E018S304/S316L: 18mm, N.U45E022S304/S316L: 22mm, N.U45E028S304/S316L: 28mm, N.U45E035S304/S316L: 35mm, N.U45E042S304/S316L: 42mm, N.U45E054S304/S316L: 54mm, N.U45E076S304/S316L: 76.1mm, N.U45E089S304/S316L: 88.9mm, N.U45E108S304/S316L: 108mm. 45° ED one-way Elbow: N.U45ED018S304/S316L: 18mm, N.U45ED022S304/S316L: 22mm, N.U45ED028S304/S316L: 28mm, N.U45ED035S304/S316L: 35mm, N.U45ED042S304/S316L: 42mm, N.U45ED054S304/S316L: 54mm. Equal tee: N.U03T018S304/S316L: 18mm, N.U03T022S304/S316L: 22mm, N.U03T028S304/S316L: 28mm, N.U03T035S304/S316L: 35mm, N.U03T042S304/S316L: 42mm, N.U03T054S304/S316L: 54mm, N.U03T076S304/S316L: 76.1mm, N.U03T089S304/S316L: 88.9mm, N.U03T108S304/S316L: 108mm. Reducing tee: N.U3TR2218S304/S316L: 22X18mm, N.U3TR2818S304/S316L: 28X18mm, N.U3TR2822S304/S316L: 28X22mm, N.U3TR3528S304/S316L: 35X28mm, N.U3TR4235S304/S316L: 42X35mm, N.U3TR5442S304/S316L: 54X42mm, N.U3TR7654S304/S316L: 76.1X54mm, N.U3TR8954S304/S316L: 88.9X54mm, N.U3TR8976S304/S316L: 88.9X76.1mm, N.U3TR10876S304/S316L: 108X76.1mm, N.U3TR10889S304/S316L: 108X88.9mm. Female thread Tee: N.U3TF18050S304/S316L: 18mmX1/2” BSP (F), N.U3TF22075S304/S316L: 22mmX3/4” BSP (F), N.U3TF28100S304/S316L: 28mmX1” BSP (F), N.U3TF35125S304/S316L: 35mmX11/4” BSP (F), N.U3TF42150S304/S316L: 42mmX11/2” BSP (F), N.U3TF54200S304/S316L: 54mmX2” BSP (F). Female thread reducing Tee: N.U3TRF22050S304/S316L: 22mmX1/2” BSP (F), N.U3TRF28075S304/S316L: 28mmX3/4” BSP (F), N.U3TRF35100S304/S316L: 35mmX1” BSP (F), N.U3TRF42125S304/S316L: 42mmX11/4” BSP (F), N.U3TRF54150S304/S316L: 54mmX11/2” BSP (F). Male thread Tee: N.U3TM18050S304/S316L: 18mmX1/2” BSP (M), N.U3TM22075S304/S316L: 22mmX3/4” BSP (M), N.U3TM28100S304/S316L: 28mmX1” BSP (M), N.U3TM35125S304/S316L: 35mmX11/4” BSP (M), N.U3TM42150S304/S316L: 42mmX11/2” BSP (M), N.U3TM54200S304/S316L: 54mmX2” BSP (M). Male thread reducing Tee: N.U3TRM22050S304/S316L: 22mmX1/2” BSP (M), N.U3TRM28075S304/S316L: 28mmX3/4” BSP (M), N.U3TRM35100S304/S316L: 35mmX1” BSP (M), N.U3TRM42125S304/S316L: 42mmX11/4” BSP (M), N.U3TRM54150S304/S316L: 54mmX11/2” BSP (M). Adjustable straight: N.U0SK018S304/S316L: 18mm, N.U0SK022S304/S316L: 22mm, N.U0SK028S304/S316L: 28mm, N.U0SK035S304/S316L: 35mm, N.U0SK042S304/S316L: 42mm, N.U0SK054S304/S316L: 54mm, N.U0SK076S304/S316L: 76.1mm, N.U0SK089S304/S316L: 88.9mm, N.U0SK108S304/S316L: 108mm. Hex adaptor: N.U0SD050S304/S316L: 1/2” BSP (F)X1/2” BSP (M), N.U0SD075S304/S316L: 3/4” BSP (F)X3/4” BSP (M), N.U0SD100S304/S316L: 1” BSP (F)X1” BSP (M), N.U0SD125S304/S316L: 11/4” BSP (F)X11/4” BSP (M), N.U0SD150S304/S316L: 11/2” BSP (F)X11/2” BSP (M), N.U0SD200S304/S316L: 2” BSP (F)X2” BSP (M). Short adaptor: N.U0FM075050S304/S316L: 3/4” BSP (M)X1/2” BSP (F), N.U0FM100050S304/S316L: 1” BSP (M)X1/2” BSP (F), N.U0FM100075S304/S316L: 1” BSP (M)X3/4” BSP (F), N.U0FM125100S304/S316L: 11/4” BSP (M)X1” BSP (F), N.U0FM150125S304/S316L: 11/2” BSP (M)X11/4” BSP (F), N.U0FM200150S304/S316L: 2” BSP (M)X11/2 BSP (F). Bridge: N.U00Q018S304/S316L: 18mm, N.U00Q022S304/S316L: 22mm, N.U00Q028S304/S316L: 28mm. Cap: N.U00C018S304/S316L: 18mm, N.U00C022S304/S316L: 22mm, N.U00C028S304/S316L: 28mm, N.U00C035S304/S316L: 35mm, N.U00C042S304/S316L: 42mm, N.U00C054S304/S316L: 54mm.
Manufacturer:
Shenzhen Archung Technology Co. Ltd.
Company Name
Shenzhen Archung Technology Co. Ltd.
Address
A1401 Happy City Commercial Building HePing East Road QingHua Community
Country
Longhua District

View All Listings by this Company

Print This Approval


#1912034

Range of Victaulic clamps with EPDM rubber gaskets. Products in ‘Style 905’ are for use with plain end HDPE pipe and products in ‘Style 907’ are for use with HDPE and steel pipe (EN 10217-1). For above and below ground use. Pressure ratings SDR 7.4(PN25), SDR 11(PN16), & SDR17(PN10). Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1912034
Expiry date:
31/12/2024
Size:
See models.
Marking:
Victaulic logo, model, size and material on body.
Installation Requirements:
R001
Model:
Style 905 Coupling for Plain End HDPE Pipe - sizes 63, 75, 90, 110, 125, 140, 160, 180, 200, 225mm Style 907 Transition Coupling for HDPE to Steel Pipe - sizes 63, 75, 90, 110, 125, 140, 160, 180, 200, 225mm HDPE Plain End Fittings: No. H10, 90° Elbow - 63, 75, 90, 110, 125, 140, 160, 180, 200 & 225mm; Pressure ratings SDR 7.4(PN25), SDR 11(PN16), & SDR17(PN10) No. H11, 45° Elbow - 63, 75, 90, 110, 125, 140, 160, 180, 200 & 225mm; Pressure ratings SDR 7.4(PN25), SDR 11(PN16), & SDR17(PN10) No. H20, Tee Straight - 63, 75, 90, 110, 125, 140, 160, 180, 200 & 225mm; Pressure ratings SDR 7.4(PN25), SDR 11(PN16), & SDR17(PN10) No. H50, Concentric Reducer - 90x63mm, 110x63mm, 110x90mm, 160x90mm & 160x110mm; Pressure ratings SDR 7.4(PN25), SDR 11(PN16), & SDR17(PN10) Models added April 2021: Style 905 Coupling for Plain End HDPE Pipe -sizes 250mm, 280mm, 315mm: Style 907 Transition Coupling for HDPE to Steel Pipe - sizes 250mm, 280mm: Pressure ratings: SDR 7.4 (PN25), SDR 11 (PN16), & SDR 17 (PN10)
Factor:
Victaulic Europe BVBA
Company Name
Victaulic Europe BVBA
Address
Prijkelstraat 36, B-9810 Nazareth
Country
Belgium

View All Listings by this Company

Print This Approval


#1911305

Range of fittings for use with pressure gauges, having nickel plated brass bodies and EPDM ‘o’ rings where applicable. Maximum working pressure: Kee Push fit – 10.0 bar, Kee 050 plug, Kee T Piece, Kee 050 coupler – 35.0 bar. Cold water use only.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
1911305
Expiry date:
30/11/2024
Note:
IRN R008 applies to Kee Push fit ¼” BSPP.
Size:
See model.
Marking:
Kee Push fit – Kee-PF on body Kee 050 plug – Kee-P on body Kee T Piece – Kee T on body Kee 050 coupler – Kee-050 series on body
Installation Requirements:
R001 R008
Model:
Kee Push fit: ¼” BSPP x 6mm tube (for use with John Guest blue LLDPE pipe) Kee 050 plug: ¼” BSPP x 9mm plug OD Kee T Piece: 3/8” x 3/8” x 3/8” Kee 050 coupler: ¼” BSPP x 9mm coupler OD
Manufacturer:
Kee Connections LTD
Company Name
Kee Connections LTD
Address
Unit A1 Villiers Court Villiers Road Knowsley Business Park
Postcode
L34 9ET
Country
Prescot

View All Listings by this Company

Print This Approval


#2005036

Range of press-fit fittings with brass bodies and EPDM `O`-rings for use with copper pipe manufactured in accordance with EN1057. Maximum working pressure 16.0 bar (sizes 12mm to 34mm). Maximum working pressure 10.0 bar (sizes 35mm to 54mm). Maximum operating temperature 90°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2005036
Expiry date:
31/05/2025
Marking:
DBW, CR and size on body
Installation Requirements:
R001
Model:
S6243 (15mm press-fit x 1/2” BSP (M)) S6243 (15mm press-fit x 3/4” BSP (M)) S6243 (18mm press-fit x 1/2” BSP (M)) S6243 (18mm press-fit x 3/4” BSP (M)) S6243 (22mm press-fit x 1/2” BSP (M)) S6243 (22mm press-fit x 3/4” BSP (M)) S6243 (22mm press-fit x 1” BSP (M)) S6243 (28mm press-fit x 3/4” BSP (M)) S6243 (28mm press-fit x 1” BSP (M)) S6243 (35mm press-fit x 1” BSP (M)) S6243 (35mm press-fit x 1.1/4” BSP (M)) S6243 (42mm press-fit x 1.1/2” BSP (M)) S6243 (54mm press-fit x 2” BSP (M)) S6270 (15mm press-fit x 1/2” BSP (F)) S6270 (15mm press-fit x 3/4” BSP (F)) S6270 (18mm press-fit x 1/2” BSP (F)) S6270 (18mm press-fit x 3/4” BSP (F)) S6270 (22mm press-fit x 1/2” BSP (F)) S6270 (22mm press-fit x 3/4” BSP (F)) S6270 (22mm press-fit x 1” BSP (F)) S6270 (28mm press-fit x 3/4” BSP (F)) S6270 (28mm press-fit x 1” BSP (F)) S6270 (35mm press-fit x 1” BSP (F)) S6270 (35mm press-fit x 1.1/4” BSP (F)) S6270 (42mm press-fit x 1.1/2” BSP (F)) S6270 (54mm press-fit x 2” BSP (F)) S6359 (15mm press-fit x 1/2” BSP (F)) S6359 (22mm press-fit x 3/4” BSP (F)) S6359 (15mm press-fit x 3/4” BSP (F)) S6359 (22mm press-fit x 1” BSP (F)) S6359 (28mm press-fit x 1.1/4” BSP (F)) S6092 (15mm press-fit x 1/2” BSP (M)) S6092 (22mm press-fit x 3/4” BSP (M)) S6092 (28mm press-fit x 1” BSP (M)) S6090 (15mm press-fit x 1/2” BSP (F)) S6090 (22mm press-fit x 3/4” BSP (F)) S6090 (28mm press-fit x 1” BSP (F)) S6472 (15mm press-fit x 1/2” BSP (F)) S6472 (22mm press-fit x 3/4” BSP (F)) S6130 (15mm press-fit x 1/2” BSP (F)) S6130 (18mm press-fit x 1/2” BSP (F)) S6130 (22mm press-fit x 1/2” BSP (F)) S6130 (22mm press-fit x 3/4” BSP (F)) S6130 (28mm press-fit x 1/2” BSP (F)) S6130 (28mm press-fit x 3/4” BSP (F)) S6130 (28mm press-fit x 1” BSP (F)) S6130 (35mm press-fit x 1/2” BSP (F)) S6130 (35mm press-fit x 3/4” BSP (F)) S6130 (35mm press-fit x 1” BSP (F)) S6130 (35mm press-fit x 1.1/4” BSP (F)) S6130 (42mm press-fit x 1/2” BSP (F)) S6130 (42mm press-fit x 3/4” BSP (F)) S6130 (42mm press-fit x 1” BSP (F)) S6130 (42mm press-fit x 1.1/2” BSP (F)) S6130 (54mm press-fit x 1/2” BSP (F)) S6130 (54mm press-fit x 1” BSP (F)) S6130 (54mm press-fit x 2” BSP (F)) S6246 (15mm press-fit x 1/2” BSP (F)) S6246 (22mm press-fit x 3/4” BSP (F)) S6341 (15mm press-fit x 1/2” BSP (M)) S6341 (18mm press-fit x 1/2” BSP (M)) S6341 (22mm press-fit x 3/4” BSP (M)) S6341 (28mm press-fit x 1” BSP (M))
Manufacturer:
Taizhou Double Winners Copper Co Ltd
Company Name
Taizhou Double Winners Copper Co Ltd
Address
#2‐902, Z Center, No. 185 Wenxue Road, Jiaojiang, Taizhou, 31800, Zhejiang, China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 5

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.