Section Code 1106 : Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
Back To Directory SectionsTectite Pro and Classic range of de-mountable push-fit fittings (DZR brass bodies, gunmetal elbows on Pro range) with EPDM ‘O’-rings and stainless steel grab rings. For use with Tectite standard multi-layered pipe (PE–xc/AL/PE-xc). Supplied with TectSEAL™ 3PS (TMLCP 3PS) plastic inserts. Maximum working pressure 6.0 bar @ 95°C. Maximum working pressure 16.0 bar @ 20°C.
‘System KAN-therm Press LBP’ consisting of brass or (black) plastic press fittings for use with ‘KAN-therm’ PERT/AL/PERT pipe. The press fitting is achieved by use of a press fitting tool. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
‘Prineto’ sliding sleeve system consisting of brass fittings for use with ‘Prineto Stabil Multilayer Pipe' (white coloured PE-X inner layer, aluminium middle layer & white coloured PE-X outer layer). The connection is achieved by a sleeve over the pipe and fitting with the use of a sliding tool. Maximum working pressure 10.0 Bar. Maximum working temperature 90°C.
‘EL’ range of compression fittings and ‘EJ’ range of press fittings (brass bodies) for use with ‘EA’ range of PEX/AL/PEX multiplayer pipe. Maximum working pressure & temperature: 10.0 Bar @ 95°C.
‘Safety` range of compression fittings with (PPSU bodies) and from June 2022 (PPS bodies) for use ‘Multicalor’ multi-layered PEX/Al/PEX pipe. For above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.
SP range of press fittings (brass bodies) for use with SP range of PEX/AL/PEX multiplayer pipe. Maximum working pressure & temperature: 10.0 Bar @ 95°C.
Unipress range of press fittings (brass bodies) for use with Unipress PEX/AL/PEX multiplayer pipe. Maximum working pressure & temperature: 10.0 Bar @ 95°C.
Wavin range of Tigris K1 (plastic bodies) and M1 (brass bodies) press-fit fittings for use with Tigris PEX/AL/PE HD (50mm & 63mm) and Tigris PERT/AL/PERT WT (75mm) barrier pipes. Maximum working pressure 6.0 bar. Maximum operating temperature 95°C.
‘ZL' range of compression fittings and press fittings (brass bodies) for use with ‘ZL range of PEX/AL/PEX multiplayer pipe. Maximum working pressure & temperature: 10.0 Bar @ 95°C.
Range of compression fittings and press fittings (brass bodies) for use with ‘NP1’ range of PEX/AL/PEX multiplayer pipe. Maximum working pressure & temperature: 10.0 Bar @ 95°C.
Range of Protecta-line multilayer pipes manufactured to BS EN8588, PE100 63mm to 355mm and PE80 25mm to 32mm. For use with : Mechanical compression fittings: 25-32mm (PE80 pipe), 63mm (PE100 multi pipe) Electrofusion fittings: 63-355mm (PE100pipe) Mechanical clamp-on fittings: 63-180mm (PE100pipe) PE to Copper Pipe Coupler transition fittings are for use with copper pipe (BS EN 1057) For below ground use. Maximum working pressure: 10 bar when used with SDR17 PE100 Protecta-Line pipes 12.5 bar when used with SDR11 PE80 Protecta-Line pipes 16 bar when used with SDR11 PE100 Protecta-Line pipes 12.5bar when used with copper pipe.
Range of 'PF Press' TH Profile Brass Press Fittings for use with 'PF Press' Pert-al-Pert Multilayer pipe manufactured to EN ISO 21003 in sizes 16mm, 20mm, 26mm and 32mm. Maximum working pressure 10 bar. Maximum operating temperature: 16mm & 32mm - 95°C. 20mm & 26mm - 23°C between May 2023 to November 2023 and 95°C December 2023 onwards.
Range of MM and MC press fit fittings with PPSU bodies incorporating stainless steel crimp sleeves and EPDM O-Rings for use with AIS XPERT multi-layer pipes. Maximum working pressure is 10.0 bar. Maximum operating temperature is 70°C.
QUAL-Press ML PRO range of compression fittings and ‘EJ’ range of press fittings (brass bodies) for use with QUAL-Press ML PRO multiplayer pipe. Maximum working pressure & temperature: 10.0 Bar @ 95°C.
Range of press fit fittings with PPSU bodies incorporating stainless steel crimp sleeves and EPDM O-Rings for use with Multitubo multi-layer pipes. Maximum working pressure is 10.0 bar. Maximum operating temperature is 70°C.
‘Tweetop system’ consisting of brass bodied nickel plated, compression or press fit (‘U’ crimping profile) fittings for use with ‘Tweetop multilayer pipe’ PERT/AL/PERT. Maximum working pressure 10.0 Bar. Maximum working temperature 95°C.
‘Hetta system’ consisting of brass bodied nickel plated, compression or press fit (‘U’ crimping profile) fittings for use with multilayer pipe PERT/AL/PERT. Maximum working pressure 10.0 Bar. Maximum working temperature 95°C.
Page of 1
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.