Automated fire sprinkler system, consisting of an in-line water filter, a solenoid valve (activated by Smartscan (IR Sensor) once alarm confirms a fire), a pump assembly, various connecting hoses, a quick connect fitting (with test port) and a spray head outlet. The product is also supplied with a non-verifiable single check valve assembly (suitable for backflow prevention up to Fluid Category 2), intended for installation at the inlet. Maximum working pressure: 10.0 Bar. Cold water use only.

Section:

1070 Fire Protection

Section Subtitle:

Products used within fire protection systems. Products listed in this section are for non-wholesome water use only.

WRAS Approval Number:

1904057

Expiry date:

30/04/2024

Note:

No hose is supplied for connection between the control unit and spray head outlet. The single check valve supplied with this product must be installed to maintain the validity of the WRAS approval. This product has been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed.

Size:

¾” BSP (F)

Marking:

Automist on control unit. Plumis on adhesive label on control unit.

Installation Requirements:

R001 R040 R415

Model:

Automist SmartScan Hydra System.

Manufacturer:

Plumis Ltd

Company Name

Plumis Ltd

Address

HMS President (1918), Victoria Embankment, London

Postcode

EC4Y 0HJ

Phone

+44 (0) 208 133 8775

View All Listings by this Company

Range of pump systems for use in fixed installation fire sprinkler systems. Having black polymer coated cast iron bodies, pressure gauge and pressure switch and electronic controller installed within a cabinet. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1070 Fire Protection

Section Subtitle:

Products used within fire protection systems. Products listed in this section are for non-wholesome water use only.

WRAS Approval Number:

1907331

Expiry date:

31/07/2024

Note:

IRN R150 is required on the supply to this fitting because it is for a non-wholesome water application and the materials of construction have not been fully assessed against the requirements of the Regulations. Additional backflow protection may be required depending on the type of sprinkler system or arrangement this unit is employed within.

Size:

See model.

Marking:

Grundfos logo on front of casing. Grundfos logo, serial no, part no, date of manufacture YYWW and technical information on adhesive label on pump.

Installation Requirements:

R001 R150 R415

Model:

98916439 – 1” suction x 1” discharge 98916440 – 1” suction x 1” discharge 98916461 – 1¼” suction x 1” discharge 98916462 – 1¼” suction x 1” discharge 99282914 – 1¼” suction x 1” discharge 98916463 – 1½” suction x 1½” discharge 98916464 – 1½” suction x 1½” discharge All connections are BSP (F)

Manufacturer:

Grundfos Manufacturing Ltd.

Company Name

Grundfos Manufacturing Ltd.

Address

Ferryboat Lane Castletown Sunderland

Postcode

SR5 3JL

Phone

0191 549 5555

View All Listings by this Company

SD 200` pressure augmenting fire sprinkler device comprising of an end suction fire pump with a non-return valve on its outlet, multistage jockey pump with a lever operated spherical valve and non-return valve on its outlet, galvanised steel and copper pipework, pressure switches and gauges, pump sensing unit and two stainless steel braided EPDM lined hoses. Maximum working pressure 11.0 bar. Cold water use only.

Section:

1070 Fire Protection

Section Subtitle:

Products used within fire protection systems. Products listed in this section are for non-wholesome water use only.

WRAS Approval Number:

2310095

Expiry date:

31/10/2028

Note:

Additional backflow protection may be required depending on the category of risk of the fire sprinkler system.

Size:

Electric fire pump: DN100 flanged. Jockey pump: DN32 PJE.

Marking:

Triple P Products logo, SD200 and website on body.

Installation Requirements:

R001 R150 R415

Model:

SD200

Factor:

Triple P projects Ltd.

Company Name

Triple P projects Ltd.

Address

Old County Police Station, 15 Neath Road, Resolven

Postcode

SA11 4AA

Country

Neath

View All Listings by this Company