Filters and Housings

Section Code 1050 :

Back To Directory Sections

#1903327

Inline, disposable, shower or tap outlet filters. Models QJC212 & QJC22 are the tap/jet outlet and models QRC212 & QRC22 are the shower rose outlet. Maximum operating temperature 60°C. Open outlet use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
1903327
Expiry date:
31/03/2024
Size:
10.78mm spigot inlet
Marking:
Pall & model on body.
Installation Requirements:
R001 R150 R170 R040
Model:
QJC212 & QRC212 Models added April 2021: QJC22 QRC22
Factor:
Pall Medical
Company Name
Pall Medical
Address

View All Listings by this Company
Manufacturer:
Pall Newquay
Company Name
Pall Newquay
Address

View All Listings by this Company

Print This Approval


#1905340

Filters, intended to connect to tap outlets, incorporating plastic bodies and hollow fibre filter membrane. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1050 Filters and Housings
WRAS Approval Number:
1905340
Expiry date:
31/05/2024
Size:
20.21mm clip retainer
Marking:
T-Safe on body.
Installation Requirements:
R001 R120 R170 R040
Model:
T-Safe Tap Safe medical filter 02-831003, 02-831015, 02-831200, 02-831201, 02-831202, 02-831203, 02-831204, 02-831205, 02-831206 & 02-831207
Manufacturer:
Johs. Tandrup A/S
Company Name
Johs. Tandrup A/S
Address
Gydevang 1, DK - 3450 Allerod, Denmark

View All Listings by this Company

Print This Approval


#1907030

In-line water filter and housing with polypropylene body and NBR ‘O’ rings. Maximum working pressure 8.6 bar. Cold water use only

Section:
1050 Filters and Housings
WRAS Approval Number:
1907030
Expiry date:
31/07/2024
Size:
¼” push-fit (F)
Marking:
Aqua Cure Ltd. model and technical information on adhesive label on body
Installation Requirements:
R001 R008 R120 R150 R170
Model:
ACFF88PF
Factor:
Aqua Cure Limited
Company Name
Aqua Cure Limited
Address
3A & 3B Dakota business park Dakota way Burscough Lancashire
Postcode
L408AF
Country
United Kingdom
Phone
01704 516916
General Email
Phill.mayer@aquacure.co.uk

View All Listings by this Company

Print This Approval


#1907070

PROBOIL RANGE OF In-line water filter and housing with polypropylene body and NBR ‘O’ rings. Maximum working pressure 8.6 bar. Cold water use only

Section:
1050 Filters and Housings
WRAS Approval Number:
1907070
Expiry date:
31/07/2024
Size:
¼” push-fit (F)
Marking:
PROBOIL, model and technical information on adhesive label on body
Installation Requirements:
R001 R008 R120 R150 R170
Model:
PT1201RMC, PT1204, PT1206, HK1076 & HK1077
Factor:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road
Postcode
S75 1HT
Country
Barnsley
Phone
01226 283434
General Email
pillingworth@abodedesigns.co.uk

View All Listings by this Company

Print This Approval


#2001922

Range of inline filter housings with plastic bodies. The unit incorporates a DZR brass manual bleed valve button and plunger. Maximum working pressure 6.0 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2001922
Expiry date:
31/01/2025
Note:
This approval does not include a filter cartridge
Size:
1½” BSP (M)
Marking:
Aquacheck Safeguard Boundary Box Filter on body
Installation Requirements:
R001 R008 R120 R150 R170
Model:
Safeguard Boundary Box Filter
Manufacturer:
Aquacheck Engineering Ltd.
Company Name
Aquacheck Engineering Ltd.
Postcode
OL11 3DT
Phone
01706 344 997

View All Listings by this Company

Print This Approval


#2003063

Range of plastic manifold bodies and filter cartridges with EPDM ‘O’-rings incorporating a isolation valve on the inlet and outlet. Maximum working pressure 8.6 bar.

Section:
1050 Filters and Housings
WRAS Approval Number:
2003063
Expiry date:
31/03/2025
Note:
Cold water use only.
Size:
¾” NPT (F) x ¾” NPT (F)
Marking:
HOSHIZAKI, max pressure and max working temperature on manifold. HOSHIZAKI, PENTAIR and other technical info on filter.
Installation Requirements:
R001 R120 R150 R170
Model:
Hoshizaki 4HC-H Twin, product no EV932052, Hoshizaki 4HC-H Triple, product no EV932053 operational in combination with Filter cartridge (differing only in amount), Hoshizaki 4HC-H Cartridge, product number EV965511 that can be substituted by optional - Plug EV311511.
Factor:
Pentair International
Company Name
Pentair International
Address
Avenue de Sevelin 18 1004 Lausanne Switzerland

View All Listings by this Company

Print This Approval


#2005031

Range of water filters comprising of plastic filter cartridges with carbon blocks and plastic filter heads for use with 'John Guest LLDPE' pipe. Maximum working pressure 8.6 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2005031
Expiry date:
31/05/2025
Size:
8mm push-fits inlets and outlets
Marking:
Brita, model, pressure, temperature and product information on label on filter body. Brita, pressure, temperature and flow arrow on label on body of filter head
Installation Requirements:
R001 R120 R150 R170
Model:
CLARITY Taste 50. CLARITY Taste 100. CLARITY Filter head. Model added November 2020 CLARITY Protect 100.
Manufacturer:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Country
Germany
Phone
+49 6128 746 0

View All Listings by this Company

Print This Approval


#2006002

Range of water filters comprising of polypropylene housings and caps. The filter head incorporates an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 7.0 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2006002
Expiry date:
30/06/2025
Size:
8mm push-fit inlet & outlet.
Marking:
Water Care Filters on side of filter body
Installation Requirements:
R001 R008 R120 R150 R170
Model:
Activated Carbon Filters: R11079.2 – Refiner RS250. R11078.2 – Refiner RS 350. R11080.2 – Refiner RS 500. Activated Carbon Filters with Silver Ions: R11940 – Refiner RS250 AG. R11941 – Refiner RS 350 AG. R11942 – Refiner RS 500 AG.
Manufacturer:
WATER CARE FILTERS SRL
Company Name
WATER CARE FILTERS SRL

View All Listings by this Company

Print This Approval


#2005024

Range of in-line water filters (cartridge and head) with plastic bodies and EPDM ‘O’ rings. The A 1000 model incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.6 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2005024
Expiry date:
31/05/2025
Size:
3/8” BSP (M)
Marking:
BRITA, PN, model and product information on body
Installation Requirements:
R001 R120 R150 R170
Model:
A 1000 & C1000 AC
Manufacturer:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Country
Germany
Phone
+49 6128 746 0

View All Listings by this Company

Print This Approval


#2010309

‘Purity’ range of plastic filter heads with EPDM ‘O’-rings. Maximum working pressure 8.6 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2010309
Expiry date:
31/10/2025
Size:
See model
Marking:
Brita, PN, model, product information and contact details on adhesive label on body.
Installation Requirements:
R001 R120 R150 R170
Model:
Purity C IQ: ⅜” BSP (M) Purity C IQ: 8mm push fit connection
Factor:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Country
Germany
Phone
+49 6128 746 0
General Email
info@brita.net

View All Listings by this Company

Print This Approval


#2012034

Range of water filter systems with optional distributor heads. The inlets incorporate a non-return valve. Maximum working pressure 6.9 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2012034
Expiry date:
31/12/2025
Size:
¾” BSP male inlet and outlet
Marking:
BRITA, WRAS and technical information on adhesive label on body.
Installation Requirements:
R001 R120 R150 R170
Model:
Professional water filter system (B2B) "Purity Steam":- Purity 450 Steam including cartridge assembly Purity 450 and lid assembly MDU 450 or optional lid assembly DH 450. Purity 600 Steam including cartridge assembly Purity 600 Steam and lid assembly MDU 600 or optional lid assembly DH 600. Purity 1200 Steam including cartridge assembly 1200 and lid assembly MDU 1200 or optional lid assembly DH 1200 The models are available with two different distributor heads (MDU and DH), the MDU (measurement display unit) has an electronic display to show the filtered volume, the DH (distributor head) has no electronic display.
Manufacturer:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Country
Germany
Phone
+49 6128 746 0

View All Listings by this Company

Print This Approval


#2012361

Range of complete water filter heads and compatible filter cartirdges with plastic bodies and EPDM ‘O’-rings. The FX filters are carbon block based and the VH-IEN filters use an ion exchange resin. Maximum working pressure 8.6 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2012361
Expiry date:
31/12/2025
Note:
Please note that the product is marked with ‘38°C’ which the manufacturer states is the ambient air temperature and not water temperature. The WRAS Approval is for cold water use only.
Size:
10mm push fit (to filter head).
Marking:
Microfilter logo and technical information on adhesive label on body.
Installation Requirements:
R001 R008 R120 R150 R170
Model:
FX10, FX15 & FX17. VH-IEN 1500, VH-IEN 3000, VH-IEN 6000 & VH-IEN 9000
Manufacturer:
Microfilter Co., Ltd
Company Name
Microfilter Co., Ltd
Address
162-1 SANSU-RI DEOKSAN-MYEON JINCHEONKUN CHUNGBUK 365-842
Phone
+82-43-531-7024

View All Listings by this Company

Print This Approval


#2009056

Range of water filters comprising of plastic filter heads and plastic filter cartridges with granular activated carbon (Purity C50 fresh only), calcium carbonate (Purity Fresh C50 only) or granular activated carbon and ion exchange resin (all other models). The push-fit models are for use with John Guest LLDPE tube. Maximum working pressure 8.6 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2009056
Expiry date:
30/09/2025
Note:
Discharge from the rinsing tube must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:
G3/8” filter heads: ⅜” BSP (M) inlets and outlets. JG/8 filter heads: 8mm push-fit inlets and outlets.
Marking:
BRITA, model number, maximum temperature, maximum pressure and other technical information on adhesive label on body and filter head.
Installation Requirements:
R001 R120 R150 R170
Model:
Filter Cartridges: Purity C25 Quell ST, Purity C50 Quell ST, Purity C150 Quell ST, Purity C300 Quell ST, Purity C500 Quell ST, Purity C1100 Quell ST. Purity C150 Finest, Purity C300 Finest, Purity C500 Finest, Purity C1100 Finest. Purity Fresh C50. PURITY C300 DISPENSER, PURITY C500 DISPENSER, PURITY C1100 DISPENSER. PURITY C500 MinUp. P1000, P3000. Filter Heads: 0-70% G3/8” (1013637), 0-70% JG/8 (1013636), 0% G3/8” (1002949), 0% JG/8 (1002942), 30% G3/8” (1002952) & 30% JG8 (1002945).
Manufacturer:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Country
Germany
Phone
+49 6128 746 0

View All Listings by this Company

Print This Approval


#2107305

‘Profine’ plastic bodied filter head incorporating EPDM ‘O’-rings for use with filter cartridges (not supplied).For use with LLDPE tube (manufactured to DIN 8072). All models can be specified with or without an integral bracket. Maximum working pressure 6.0 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2107305
Expiry date:
31/07/2026
Note:
Intended for use with 33.65mm OD: Cartridge Profine Blue, Silver, Violet, Lilac and Ocra. Approved separately.
Size:
All models: ¼” pushfit inlet/outlet. ⅜” pushfit inlet/outlet. 8mm pushfit inlet/outlet. 10mm pushfit inlet/outlet.
Marking:
Profine by Think Water on body.
Installation Requirements:
R001 R008 R150
Model:
1100322 (parallel flow), 1100323 (in series flow), 1100324 (one side flow), 1100325 (in series reverse flow).
Manufacturer:
Think Water Srl
Company Name
Think Water Srl
Address
Via Delle Pezze 35-35013 Cittadella Padova
Country
Italy
Phone
+39 49 9403792

View All Listings by this Company

Print This Approval


#2111014

Range of carbon block water filters and housings. Maximum working pressure 10.5 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2111014
Expiry date:
30/11/2026
Size:
¾” BSP male inlet and outlet
Marking:
Spectrum and technical information on adhesive label on side of body.
Installation Requirements:
R001 R120 R150 R170 R290
Model:
Spectrum PV-CTU range comprising of models: PV-CTU-517-(3) PV-CTU-613-(4) PV-CTU-717-(7) PV-CTU-730-(13) PV-CTU-817-(8) PV-CTU-835-(19) PV-CTU-1035-(31) PV-CTU-1054-(49)
Factor:
Fileder Filter Systems Ltd.
Company Name
Fileder Filter Systems Ltd.
Address
20/20 BUSINESS PARK, MAIDSTONE, KENT ME16 0LS

View All Listings by this Company

Print This Approval


#2111021

Range of water filter housings with plastic heads and bodies (various colours - see model), incorporating NBR ‘O’-rings (158087/088/207/208/218/219/261 models only) or with EPDM ‘O’-rings (all other models). Big Blue for Cartridges - Maximum working pressure 6.9 bar (10” filter housings) and 6.2 bar (20” filter housings). Maximum working temp 38°C. All other models - Maximum working pressure 8.62 bar. Maximum working temp 52°C.

Section:
1050 Filters and Housings
WRAS Approval Number:
2111021
Expiry date:
30/11/2026
Note:
IRN R008 applies to products with “CLEAR” or “CL” in model code only. This approval does not include the filter media intended for use with this product.
Size:
Standard Housings & 3G Standard models: ¾” BSP (F) Big Blue for cartridges 150253/254/257/258 models: 1½” BSP (F). Big Blue for cartridges 150262/263/272/273 models: 1” BSP (F). Slim Line models: ½” BSP (F), except for; Slim Line 158085/086/158087/087/121/122/261 models: ⅜” BSP (F). 3G Slim Line models: ½” BSP (F), except for; 3G Slim Line 158632 model: ⅜” BSP (F). Black Housings 150670/674 models: ¾” BSP (F). Big Blue for Cartridges (Black) Housings 150675/676 models: 1” BSP (F).
Marking:
PENTAIR on adhesive label on body
Installation Requirements:
R001 R008 R120 R150 R170 R290
Model:
Product Family: Standard Housings (Black filter head and blue filter housing). 150102: #10 BL W/PR,BT,MB CAP(EX) 12/C. 150103: #10 BL WO/PR,BT,MB CAP(EX) 12/C. 150104: #20 BL W/PR,BT,MB CAP(EX) 8/C. 150105: #20 BL WO/PR,BT,MB CAP(EX) 8/C. Product Family: Black Housings (Black filter head and black filter housing). 150670: #10 BK&BK MB BSP CAP. 150674: #20 STD BK/BK MB BSP W/PR 8/C. Product Family: 3G Standard (Black filter head and blue filter housing). 150543: #10 3G-ST BK/BL 3/4"BT MB W/PR. 150545: #20 3G-ST BK/BL 3/4"BT MB W/PR. 150549: #20 3G-ST BK/BL 3/4"BT MB. 150551: #10 3G-ST BK/BL 3/4"BT IB W/PR. 150553: #20 3G-ST BK/BL 3/4"BT IB W/PR. Product Family: Big Blue for Cartridges (Black filter head and blue filter housing). 150253: 20"BIG BL,BTHFPP W/PR,1.5" 4/C. 150254: 20"BIG BL,BTHFPP WO/PR,1.5" 4/C. 150257: BIG BL,BT HFPP W/PR,1-1/2" 6/C. 150258: BIG BL,BT HFPP WO/PR,1-1/2" 6/C. 150262: #10 BB BK/BL 1" BT W/PR 6/C. 150263: BIG BL,BT HFPP WO/PR,1"(EX) 6/C. 150273: 20"BIG BL,BT HFPP W/PR,1" 4/C. 150274: 20"BIG BL,BT HFPP WO/PR,1" 4/C. Product Family: Big Blue for Cartridges (Black) (Black filter head and black filter housing). 150675: #20 BB BK/BK 1" BSP W/PR 4/C. 150676: #10 BB BK/BK 1" BSP W/PR 6/C*O. Product family: Slim Line BL/CL 5” (Blue filter head and clear filter housing). 158121: 3/8"#5 CLEAR W/PR,BT (EX) 12/C. 158122: 3/8"#5 CL WO/PR,BT (EX) 12/C. 158240: 1/2"#5 CLEAR W/PR,BT (EX) 12/C. 158241: 1/2"#5 CL WO/PR,BT (EX) 12/C. Product family: Slim Line BL/CL 10” (Blue filter head and clear filter housing). 158218: 1/2''SL CLEAR W/PR;BT (EX) 12/C. 158219: 1/2''SL CL WO/PR;BT (EX) 12/C. Product family: Slim Line BK/BL (Black filter head and blue filter housing). 158085: #5 BLUE W/PR BT (EX) 12/C. 158086: #5 BLUE WO/PR BT (EX) 12/C. 158087: #10 SL BK/BL 3/8' W/PR BT 12/C. 158088: #10 SL BLUE WO/PR;BT(EX) 12/C. 158207: 1/2"#10 SL BL W/PR,BT(EX) 12/C. 158208: 1/2"SL BLUE WO/PR,BT (EX) 12/C. 158210: 1/2" #5 BLUE W/PR BT (EX) 12/C. 158211: 1/2"#5 BLUE WO/PR BT (EX) 12/C. Product family: Slim Line White (White filter head and white filter housing). 158261: #10 SL WH/WH 3/8' W/O PR BT12/C. Product Family: 3G Slim Line BK/BL (Black filter head and blue filter housing). 158588: #10 3G-SL BK/BL 1/2"BT MB W/PR. 158589: #10 3G-SL BK/BL 1/2" BT MB. 158628: #10 3G-SL BK/BL 1/2"BT IB W/PR. 158632: #10 3G-SL BK/BL 3/8"BT IB W/PR. Product Family: 3G Slim Line BL/CL (Blue filter head and clear filter housing). 158590: #10 3G-SL BL/CL 1/2"BT MB W/PR. 158630: #10 3G-SL BL/CL 1/2'BT IB W/PR. 158631: #10 3G-SL BL/CL 1/2"BT IB 12/C.
Manufacturer:
Pentair International Sarl
Company Name
Pentair International Sarl
Address
Pentair International Sarl Avenue de Sévelin, 18 1004 Lausanne Switzerland

View All Listings by this Company

Print This Approval


#2204075

Range of water filter heads and housings (sumps). The HIS/IN4 models have a chrome plated stainless steel filter head and housing, all other models have a plastic filter head and housing. Ecofast/IN3/QT models incorporate an integral quick turn shut off valve within the filter head to allow the filter housing to be removed. All models are for use with John Guest LLDPE pipe. Maximum working pressure 6.0 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2204075
Expiry date:
30/04/2027
Note:
R008 does not apply to the HIS/IN4 models.
Size:
⅜" push fit inlet and outlet.
Marking:
Filter heads and housings: Ecofast/IN3/QT: Doulton on filter head. All other models: Doulton on adhesive label on filter sump. Cartridges: Doulton or British Berkefeld (brand of Doulton Water Filters) (see model section) and filter model on top of filter/treatment cartridge.
Installation Requirements:
R001 R008 R120 R150 R170
Proviso:
* The product(s) listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
Ecofast/IN3/QT. HIP DUO/IN2. HIP/IN1. HIS/IN4. The models can be supplied with any of the filter cartridges as listed below. Except the HIP DUO/IN2 housing which always includes the Ultracarb Filter Candle in one housing and the limescale reduction/ ONINFL cartridge in the other. British Berkefeld brands: Standard Filter Candle*, Sterasyl Filter Candle*, Super Sterasyl Filter Candle*, Ultra Sterasyl Filter Candle*, ATC Supersterasyl*. Doulton brands: Standard Filter Candle*, GOFgravity1*, Super Sterasyl Filter Candle*, Ultra Sterasyl Filter Candle*, GOFgravity2*, Ultra Fluoride Filter Candle*, GOFgravity3*, Ultracarb Filter Candle*, Biotect Ultra Filter Candle*, Ultracarb SI Filter Candle*, Biotect Ultra SI Filter Candle*, ONINFE*, Fluoride Reduction Water Treatment Cartridge, ONINFF, Nitrate Reduction Water Treatment Cartridge, ONINFN, Limescale Reduction Water Treatment Cartridge, ONINFL, Chlorine Reduction Water Treatment Cartridge, ONINFC, Sediment Reduction Water Treatment Cartridge, ONINFS.
Manufacturer:
Doulton Water Filters
Company Name
Doulton Water Filters
Address
Lymedale Cross, Lower Milehouse Lane, Newcastle-under-Lyme, Staffordshire
Postcode
ST5 9BT
Country
United Kingdom
Phone
01782 664420

View All Listings by this Company

Print This Approval


#2204023

A range of blue epoxy coated steel reverse rinsing fine filters with a stainless-steel sieve and an EDPM O-ring. Supplied with two pressure gauges and metal ball valve on the drain. Maximum working pressure 16 bar. Maximum operating temperature 40°C.

Section:
1050 Filters and Housings
WRAS Approval Number:
2204023
Expiry date:
30/04/2027
Size:
DN65, DN80 or DN100 Flanged (Replaces XX in the model code).
Marking:
Resideo, Braukmann, Model name, PN, DN and other technical information on adhesive label on body.
Installation Requirements:
R001 R110 R150 R170 R511
Model:
F78TS-XXFY Y denotes the mesh size of the filter and can be replaced with any of the following: A = 100μm, B = 20μm, C = 50μm, D = 200μm.
Factor:
Pittway Sarl
Company Name
Pittway Sarl
Address
A3 - ZA La Pièce 6 1180 Rolle
Country
Switzerland

View All Listings by this Company
Manufacturer:
Ademco 1 GmbH
Company Name
Ademco 1 GmbH
Address
Hardhofweg 40, 7481 Mosbach
Country
Germany

View All Listings by this Company

Print This Approval


#2205057

Range of medical sterilised water filter cartridges with plastic bodies and EPDM ‘O’-Rings. Models MTFW-SLSS / MTFD-SLSS incorporate a check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum Working Temperature: 50°C.

Section:
1050 Filters and Housings
WRAS Approval Number:
2205057
Expiry date:
31/05/2027
Note:
Open Outlet Use Only. Claims made by the manufacturer have not been tested and are not considered part of the approval listing.
Marking:
Pentair, model code and technical information on adhesive label located on body.
Installation Requirements:
R001 R120 R150 R170
Model:
MSF-SLSS: Medical Shower Filter Sterilised Starter Set (Connection 1/2" BSP/NPT M) MSF-SLRC: Medical Shower Filter Sterilised Replacement Cartridge (Connection Quick Release) MTFW-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT) MTFD-SLRC: Medical Tap Filter Drinking Sterilised Replacement Cartridge (Connection Quick Release) MTFD-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT) MTFD-SLRC: Medical Tap Filter Drinking Sterilised Replacement Cartridge (13.68mm Connection Quick Release)
Factor:
Fileder Filter Systems Ltd.
Company Name
Fileder Filter Systems Ltd.
Address
20/20 BUSINESS PARK, MAIDSTONE, KENT ME16 0LS

View All Listings by this Company

Print This Approval


#2006086

Range of water filters comprising of polypropylene housings and caps. The filter head incorporates an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 7.0 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2006086
Expiry date:
30/06/2025
Size:
8mm push-fit inlet & outlet.
Marking:
BILT SRL on adhesive label on bottom of filter
Installation Requirements:
R001 R008 R120 R150 R170
Model:
AQUAMICRO 250, AQUAMICRO 350 & AQAUMICRO 500 ACTIVATED CARBON FILTERS WITH SILVER IONS
Factor:
BILT SRL
Company Name
BILT SRL
Address
44019 VOGHENZA Fraz Voghiera Via Provinciale 97/A
Country
Italy

View All Listings by this Company

Print This Approval


#2206333

Range of tap outlets with plastic bodies incorporating a filter within the body, incorporating a hollow fibre filter membrane. The inlet of the filter incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The filters are supplied with (and must be used with) a chrome plated brass adapter which incorporates a pastic flow regulator. Maximum operating temperature 60°C.

Section:
1050 Filters and Housings
WRAS Approval Number:
2206333
Expiry date:
30/06/2027
Note:
Open outlet use only.
Size:
90-001861: M22 (M) 90-001862: M22 (F)
Marking:
T-Safe (brand of Johs. Tandrup A/S) on body.
Installation Requirements:
R001 R040
Model:
02-831401 Medical Tap Filter Fixed Position 31 Day. 02-831402 Medical Tap Filter Fixed Position 31 Day, Sterile. 02-831403 Medical Tap Filter Fixed Position 62 Day. 02-831404 Medical Tap Filter Fixed Position 62 Day, Sterile. 02-831405 Medical Tap Filter Fixed Position 92 Day. 02-831406 Medical Tap Filter Fixed Position 92 Day, Sterile. Filters are to be installed with 90-001861 Fixed Position Tap Adapter, Gasket seal & 90-001862 Fixed Position Tap Adapter, O-ring seal.
Manufacturer:
Johs. Tandrup A/S
Company Name
Johs. Tandrup A/S
Address
Gydevang 1, DK - 3450 Allerod, Denmark

View All Listings by this Company

Print This Approval


#2207340

In-line carbon block water filter with polypropylene body. Maximum working pressure 6.8 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2207340
Expiry date:
31/07/2027
Size:
8mm pushfit
Marking:
E – Tec and model on adhesive label on body.
Installation Requirements:
R001 R008 R120 R150 R170
Model:
ETEC – 8016A
Manufacturer:
Xiamen E-Tec Electric Shower Co. Ltd.
Company Name
Xiamen E-Tec Electric Shower Co. Ltd.
Address
No. 8 XinGuang Road, Haicang District, Xiamen Fujuan
Country
China,

View All Listings by this Company

Print This Approval


#2209051

In-line water filter system comprising of a head and replaceable carbon block cartridge (within a fixed housing) for use with John Guest LLDPE pipe. Maximum working pressure 8.6 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2209051
Expiry date:
30/09/2027
Size:
3/8” pushfit
Marking:
Insinkerator, model, and product information on label on body
Installation Requirements:
R001 R120 R150 R170
Model:
F-701R
Factor:
InSinkErator
Company Name
InSinkErator
Address
4700 21st Street, Racine, WI 53406-5093
Country
USA

View All Listings by this Company
Manufacturer:
3M Wroclaw Sp. zoo
Company Name
3M Wroclaw Sp. zoo
Address
Ul. Kowalska 143 51-424 Wroclaw Poland

View All Listings by this Company

Print This Approval


#2211025

Range of filter heads with plastic bodies. Models with push-fit connections are for use with John Guest LLDPE pipes. Maximum working pressure 8.6 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2211025
Expiry date:
30/11/2027
Size:
Please refer to model.
Marking:
Pentair and model on adhesive label on body.
Installation Requirements:
R001 R120 R150 R170
Model:
4252-16 QL2B Filter Head 3/8” NPT. 4252-18 QL2 Filter Head 3/8” NPT. EV925618 QL1 Filter Head 3/8” NPT. EV925620 QL1 Filter Head with ¼” JG push-fit fitting. EV925617 QL1 Filter Head with 3/8” JG push-fit fitting.
Factor:
Pentair International S.a.r.l.
Company Name
Pentair International S.a.r.l.
Address
Avenue de Sévelin 20, CH - 1004 Lausanne
Country
Switzerland

View All Listings by this Company

Print This Approval


#2301308

Range of water filters comprising of plastic filter heads and plastic filter cartridges. Maximum working pressure 5.0 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2301308
Expiry date:
31/01/2028
Size:
3/8" push-fit.
Marking:
Mizitec logo on body.
Installation Requirements:
R001 R008 R120 R150 R170 R290
Model:
SINGLE Anti-scale carbon water filter with double filters, SINGLEFH Anti-scale carbon water filter with single filter, LS5004051 Anti-scale carbon water filter.
Manufacturer:
XiaMen Mizi Water Purification Technology Co., Ltd.
Company Name
XiaMen Mizi Water Purification Technology Co., Ltd.
Address
4th Floor No.286, Zhaogang Road, Neicuo, Xiang’an District, Xiamen
Country
China
Phone
+86 15860778772

View All Listings by this Company

Print This Approval


#2301366

Range of water filters comprising of plastic filter heads and plastic filter cartridges. Maximum working pressure 5.0 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2301366
Expiry date:
31/01/2028
Size:
3/8" push-fit.
Marking:
Lilin Tech & model number on body
Installation Requirements:
R001 R008 R120 R150 R170 R290
Model:
LS5003051 Anti-scale carbon water filter with double filters, LS5001051 Anti-scale carbon water filter with single filter, LS5004051 Anti-scale carbon water filter.
Factor:
Xiamen Lilin Technology Co., Ltd.
Company Name
Xiamen Lilin Technology Co., Ltd.
Address
Unit 201 Building 5Haiyi Industrial Park No. 7, Kengping Road Xiamen Fujian
Country
China

View All Listings by this Company

Print This Approval


#2305001

Range of in-line water filters with polypropylene bodies. Maximum working pressure 8.5 bar. Cold water use only.

Non-metallic materials and components comply with BS6920 at cold water use only°C

Section:
1050 Filters and Housings
WRAS Approval Number:
2305001
Expiry date:
31/05/2028
Note:
IRN R290 applies to models with the scale inhibitor function The push-fit fittings are for use with use with John Guest LLDPE tubing (not included on the approval).
Size:
Refer to models
Marking:
Hydro, WRAS, pressure & temp on adhesive label on body.
Installation Requirements:
R001 R008 R150 R170 R290
Model:
Hydro+ range comprising of models: GAC models: H10FA 10”: ¼” NPT female H10FB 10”: 3/8” BSP female H10PA 10”: ¼” push fit H10PB 10”: 3/8” push fit H10SB 10”:3/8” plain spigot GAC/Scale inhibitor models: H11FA 10”: ¼” NPT female H11FB 10”: 3/8” BSP female H11PA 10”: ¼” push fit H11PB 10”: 3/8” push fit H11MC 10”: 3/4” BSP male H11SB 10”: 3/8” plain spigot Dirt/Sediment models: H12FA 10” 5 micron: ¼” NPT female H12FB 10” 5 micron: 3/8” BSP female H12PA 10” 5 micron: ¼” push fit H12PB 10” 5 micron: 3/8” push fit H12SB 10” 5 micron: 3/8” plain spigot Carbon Block models: H14FA 10” 1 micron: ¼” NPT female H14FB 10” 1 micron: 3/8” BSP female H14PA 10” 1 micron: ¼” push fit H14PB 10” 1 micron: 3/8” push fit H14SB 10” 1 micron: 3/8” plain spigot Carbon Block/Scale Inhibitor models: H15FA 10” 1 micron: ¼” NPT female H15FB 10” 1 micron: 3/8” BSP female H15PA 10” 1 micron: ¼” push fit H15PB 10” 1 micron: 3/8” push fit H15SB 10” 1 micron: 3/8” plain spigot GAC models: H60FA 6”: ¼” NPT female H60FB 6”: 3/8” BSP female H60PA 6”: ¼” push fit H60PB 6”: 3/8” push fit H60SB 6”: 3/8” plain spigot GAC/Scale inhibitor models: H61FA 6”: ¼” NPT female H61FB 6”: /8” BSP female H61PA 6”: ¼” push fit H61PB 6”: 8” push fit H61SB 6”: 3/8” plain spigot
Manufacturer:
Aqua Cure Limited
Company Name
Aqua Cure Limited
Address
3a + 3b, Dakota Business Park, Dakota Way, Burscough, West Lancashire
Postcode
L40 8AF
Country
United Kingdom
Phone
01704 516 916

View All Listings by this Company

Print This Approval


#2305075

Range of in-line water filters with polypropylene bodies. Maximum working pressure 8.5 bar. Cold water use only.

Non-metallic materials and components comply with BS6920 at cold water use only°C

Section:
1050 Filters and Housings
WRAS Approval Number:
2305075
Expiry date:
31/05/2028
Note:
IRN R290 applies to models with the scale inhibitor function The push-fit fittings are for use with use with John Guest LLDPE tubing (not included on the approval).
Size:
Refer to models
Marking:
BRISTAN & EMPURA on adhesive label on body.
Installation Requirements:
R001 R008 R150 R170 R290
Model:
ECART (EMPURA E CART WATER FILTER) 10”: 3/8” plain spigot SCALE INHIBITOR
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Country
Tamworth
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2305079

Range of in-line water filters with polypropylene bodies. Maximum working pressure 8.5 bar. Cold water use only.

Non-metallic materials and components comply with BS6920 at cold water use only°C

Section:
1050 Filters and Housings
WRAS Approval Number:
2305079
Expiry date:
31/05/2028
Note:
IRN R290 applies to models with the scale inhibitor function The push-fit fittings are for use with use with John Guest LLDPE tubing (not included on the approval).
Size:
Refer to models
Marking:
Aqua Cure, WRAS, pressure & temp on adhesive label on body.
Installation Requirements:
R001 R008 R150 R170 R290
Model:
GAC/Scale inhibitor 10”: 3/8” plain spigot WG03 WG06 Water Gem
Factor:
Aqua Cure Limited
Company Name
Aqua Cure Limited
Address
3a + 3b, Dakota Business Park, Dakota Way, Burscough, West Lancashire
Postcode
L40 8AF
Country
United Kingdom
Phone
01704 516 916
General Email
sales@aquacure.co.uk

View All Listings by this Company

Print This Approval


#2305080

Range of in-line water filters with polypropylene bodies. Maximum working pressure 8.5 bar. Cold water use only.

Non-metallic materials and components comply with BS6920 at cold water use only°C

Section:
1050 Filters and Housings
WRAS Approval Number:
2305080
Expiry date:
31/05/2028
Note:
IRN R290 applies to models with the scale inhibitor function The push-fit fittings are for use with use with John Guest LLDPE tubing (not included on the approval).
Size:
Refer to model
Marking:
PURITI1, WRAS, pressure & temp on adhesive label on body.
Installation Requirements:
R001 R008 R150 R170 R290
Model:
GAC/Scale inhibitor: PURITI1 10”: 3/8” plain spigot
Factor:
Maurice Lay Distributors Ltd
Company Name
Maurice Lay Distributors Ltd
Address
Fourth Way Avonmouth Bristol
Postcode
BS11 8DW
Phone
0117 938 1900
General Email
info@caple.co.uk

View All Listings by this Company

Print This Approval


#2305081

Range of in-line water filters with polypropylene bodies. Maximum working pressure 8.5 bar. Cold water use only.

Non-metallic materials and components comply with BS6920 at cold water use only°C

Section:
1050 Filters and Housings
WRAS Approval Number:
2305081
Expiry date:
31/05/2028
Note:
IRN R290 applies to models with the scale inhibitor function The push-fit fittings are for use with use with John Guest LLDPE tubing (not included on the approval).
Size:
Refer to models
Marking:
Deva, WRAS, pressure & temp on adhesive label on body.
Installation Requirements:
R001 R008 R150 R170 R290
Model:
Carbon Block/Scale Inhibitor models: FILTER 001 10” 1 micron: ¼” push fit
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2107340

‘Blutron’ plastic bodied filter head incorporating EPDM ‘O’-rings for use with filter cartridges (not supplied).For use with LLDPE tube (manufactured to DIN 8072). All models can be specified with or without an integral bracket. Maximum working pressure 6.0 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2107340
Expiry date:
31/07/2026
Size:
All models: ¼” pushfit inlet/outlet. ⅜” pushfit inlet/outlet. 8mm pushfit inlet/outlet. 10mm pushfit inlet/outlet.
Marking:
Blutron & Model on body.
Installation Requirements:
R001 R008 R150
Model:
BLUTRON HEAD (parallel flow) BLUTRON IONIC HEAD (in series flow) BLUTRON HEAD BUILT IN (one side flow) BLUTRON IONIC HEAD BUILT IN (in series reverse flow).
Factor:
Blupura Srl
Company Name
Blupura Srl
Address

View All Listings by this Company

Print This Approval


#2305086

Range of in-line water filters with polypropylene bodies. Maximum working pressure 8.5 bar. Cold water use only.

Non-metallic materials and components comply with BS6920 at cold water use only°C

Section:
1050 Filters and Housings
WRAS Approval Number:
2305086
Expiry date:
31/05/2028
Note:
IRN R290 applies to models with the scale inhibitor function The push-fit fittings are for use with use with John Guest LLDPE tubing (not included on the approval).
Size:
Refer to models
Marking:
BWT, pressure & temp on adhesive label on body.
Installation Requirements:
R001 R008 R150 R170 R290
Model:
Carbon Block models: NCILC 10” 1 micron: ¼” push fit Carbon Block/Scale Inhibitor models: NCILH 10” 1 micron: ¼” push fit
Factor:
BWT UK LIMITED
Company Name
BWT UK LIMITED
Address
BWT HOUSE THE GATEWAY CENTRE CORONATION RD BUCKS
Postcode
HP12 3SU

View All Listings by this Company

Print This Approval


#240204707

Range of in-line carbon block water filters and housings with polypropylene bodies. Maximum working pressure 8.0 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
240204707
Expiry date:
28/02/2029
Size:
¼” pushfit or 3/8” pushfit inlet connection.
Marking:
Waterdrop, model & technical info on adhesive label on body
Installation Requirements:
R001 R008 R120 R150 R170
Model:
¼” pushfit inlet connection: EFF-6011A WD-F11B WD-F11F EFF-6013A WD-F13 EFF-6027A WD-F27 EFF-6026B EWF-8007A EWF-8002A EWF-8016S EWF-8016SW 3/8” pushfit inlet connection: EWF-8001A WD-W01 EWF-8005A
Manufacturer:
Qingdao Ecopure filter Co., Ltd
Company Name
Qingdao Ecopure filter Co., Ltd
Address
No. 13, Yishengbai Rd. Environmental Protection Industry Zone, Jimo
Country
Qingdao,

View All Listings by this Company

Print This Approval


#240202073

Range of filter cartridges and housings with plastic bodies (various finishes, see models), EPDM O-rings and PSF membrane. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating pressure 6 bar. Maximum operating temperature 50.0°C.

Section:
1050 Filters and Housings
WRAS Approval Number:
240202073
Expiry date:
28/02/2029
Size:
½” BSP (F)
Marking:
Safe water products website on body
Installation Requirements:
R001 R040 R150 R170
Model:
SS-881 - Inline-Safe Max (Chrome or White), SS-883 - Inline-Safe (Chrome or White), SS-883 Plus - Inline-Safe Plus (Chrome or White). Replacement filters: SS-2 Chrome (SS-883) SS-2 White (SS-883) SS-2+ (SS-883 Plus) SS-3 (SS-881)
Factor:
Safe Water Products bvba
Company Name
Safe Water Products bvba
Address
Schaperstraat 12 Sheldewindeke 9860
Postcode
Belgium

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.