Combination Tap Assemblies

Section Code 0684 : Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.

Back To Directory Sections

#2111704

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (either stainless steel or brass bodies in a variety of finishes). Flow is controlled via two solenoid valves (housed in a control box) activated via an infra-red sensor, the inlets to the control box incorporate stainless steel strainers. The temperature is controlled independently via a ceramic cartridge with a dome type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2111704
Expiry date:
30/11/2026
Size:
Control box: ⅜” BSP (M). Tap: Braided stainless steel braided, PEX lined hoses with 10mm spigot end connections
Marking:
VOLA on operating member
Installation Requirements:
R001 R006 R007 R010
Model:
VOLA HV1E-XX Stainless steel. Where XX denotes the surface finish: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold, 71 = Brushed Dark Copper. VOLA HV1E-XX Brass. Where XX denotes the surface finish: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2, 8700 Horsens
Country
Denmark

View All Listings by this Company

Print This Approval


#1906702

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated via infra-red sensor. The products are supplied with a stainless steel braided PEX lined flexible hose assembly to connect between the tap body and the solenoid valve. The spout outlets incorporate plastic aerators and the solenoid inlet incorporates a stainless steel strainer. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1906702
Expiry date:
30/06/2024
Size:
10mm spigot end connection.
Marking:
Stern on body.
Installation Requirements:
R001 R006 R007
Model:
Touch Free B AB1953 (battery powered) Touch Free E AB1953 (transformer powered)
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#1903039

‘DS100 Series’ of wall mounted, electronically operated tap assemblies (brass bodies - in various finishes). The flow is controlled by a solenoid valve that is actuated via an infra-red sensor on the spout. Products are supplied with metal backnuts and the spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 60ºC.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1903039
Expiry date:
31/03/2024
Note:
IRN R007 only applies to models incorporating a clear connecting hose located between the solenoid and the spout outlet.
Size:
½” BSP (M)
Marking:
Dolphin (logo) on tap body
Installation Requirements:
R001 R007 R040
Model:
DSxxx.yyy.z - DS100 Series InForm SMART taps. Where ‘xxx’ denotes the style type, the following options are available: DS101 - 90° bent spout, DS102 - 90° bent spout with wall plate fixing kit, DS103 - 55° bent spout or DS104 - 55° bent spout with wall plate fixing kit. Where ‘yyy’ denotes the projection of the spout from wall to spout outlet in mm. Range 107mm - 330mm. Where ‘z’ denotes the material finish, the following options are available: 1 - brushed satin, 2 - mirror polished, 3 - PVD satin, 4 - PVD mirror polished or 5 - powder coated. Models will also end with a numerical code (between 00-99) which denotes the colour of the finished surface. Models may include an additional R suffix which denotes that the tap is supplied without the rosette.
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#1903095

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve that is activated via an infrared sensor. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The mixer housing can be single feed (cold/mixed) ‘without mixer’ models or dual feed (hot and cold) ‘with mixer’ models. The mixer housing whether dual feed or single feed incorporates an approved single check valve cartridge on each inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The mixer housing also incorporates the solenoid valve, as well as plastic strainers and spherical valves on the inlets. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1903095
Expiry date:
31/03/2024
Note:
R010 applies to the ‘with mixer’ models.
Size:
½” BSP (M).
Marking:
Geberit on spout wall plate. Geberit on control box body.
Installation Requirements:
R001 R007 R010 R040
Model:
BATTERY OPERATED WITH MIXER: 116.264.21.1 PIAVE 17CM, 116.284.21.1 PIAVE 22CM, 116.274.21.1 BRENTA 17CM, 116.294.21.1 BRENTA 22CM. BATTERY OPERATED WITHOUT MIXER: 116.263.21.1 PIAVE 17CM, 116.283.21.1 PIAVE 22CM, 116.273.21.1 BRENTA 17CM, 116.293.21.1 BRENTA 22CM. MAINS OPERATED WITH MIXER: 116.262.21.1 PIAVE 17CM, 116.282.21.1 PIAVE 22CM, 116.272.21.1 BRENTA 17CM, 116.292.21.1 BRENTA 22CM. MAINS OPERATED WITHOUT MIXER: 116.261.21.1 PIAVE 17CM, 116.281.21.1 PIAVE 22CM, 116.271.21.1 BRENTA 17CM, 116.291.21.1 BRENTA 22CM.
Manufacturer:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Country
CV34 6NH
Phone
01926 516815

View All Listings by this Company

Print This Approval


#1904340

Range of wall mounted, two hole, single outlet (Swivel or Fixed) electronically operated tap assemblies (chromium plated brass). The products incorporate a solenoid valve controlling the flow which is actuated via an infrared sensor. Temperature is controlled independently via a thermostatic cartridge using a dome type operating member which incorporates a manual override button. Both inlets incorporate stainless steel strainers and an approved single check valve cartridge, however, the complete assemblies have not been fully tested to demonstrate that they provide adequate backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1904340
Expiry date:
30/04/2024
Size:
¾” BSP (F)
Marking:
FM Mattsson on body
Installation Requirements:
R001 R010 R040
Model:
FMM 1660-2500 WMS & FMM 1661-2500 WMS.
Manufacturer:
FMM Mora
Company Name
FMM Mora
Address
PO Box 480 SE-792 27 Mora Sverige

View All Listings by this Company

Print This Approval


#1906388

‘Classic’ range of single hole, single outlet (fixed) electronically operated, tap assemblies (chromium plated DZR brass). Flow is controlled via solenoid valve, actuated by an infra-red sensor. The spout outlet incorporates a plastic aerator. AT05-001 & AT05-11 models have a stainless steel braided PEX lined flexible inlet hose assembly with 15mm spigot end connection. AT05-002 & AT05-012 models have a 10mm copper tail. AT05-003 & AT05-013 models have a 10mm stainless steel tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1906388
Expiry date:
30/06/2024
Note:
The products are not supplied with anything to connect between the solenoid valves (15mm compression) and the copper tail (10mm), or the stainless steel tail (10mm), or the flexible inlet hose (15mm spigot) this must be sourced by the installer. R007 applies only to models that are supplied with PEX lined connecting hose assemblies.
Size:
15mm compression (solenoid - all models). AT05-001 & AT05-11 models have a stainless steel braided PEX lined flexible inlet hose assembly with 15mm spigot end connection. AT05-002 & AT05-012 models have a 10mm copper tail. AT05-003 & AT05-013 models have a 10mm stainless steel tail.
Marking:
DVS and NDF on spout body
Installation Requirements:
R001 R006 R007
Model:
Classic Range: AT05-001, AT05-002 & AT05-003. Classic Range (Swan Spout): AT05-011, AT05-012 & AT05-013.
Factor:
Dart Valley Systems Ltd.
Company Name
Dart Valley Systems Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Country
United Kingdom

View All Listings by this Company

Print This Approval


#1906389

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies - various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Depending on model the products are supplied with either a stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection or 10mm copper tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1906389
Expiry date:
30/06/2024
Note:
The products are not supplied with anything to connect between the solenoid valve (15mm compression) and the copper tail (10mm), or the flexible inlet hose (15mm spigot) this must be sourced by the installer. R007 applies only to models that are supplied with PEX lined connecting hose assemblies.
Size:
15mm compression (solenoid - all models). The following is model dependent - see model section: Stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection. 10mm copper tail.
Marking:
DVS and NDF on spout body
Installation Requirements:
R001 R006 R007
Model:
AT05-061 Aquarius DM A32 tap spout only in s/steel with PEX tails, AT05-062 Aquarius DM A32 tap spout only in s/steel copper tails, AT05-063 Aquarius DM A32 tap spout only in polish s/steel with PEX tails, AT05-064 Aquarius DM A32 tap spout only in polish s/steel with copper tails. AT05-070 Aquarius DM A45 tap spout only in s/steel with PEX tails, AT05-071 Aquarius DM A45 tap spout only in s/steel copper tails, AT05-072 Aquarius DM A45 tap spout only in polish s/steel with PEX tails, AT05-073 Aquarius DM A45 tap spout only in polish s/steel with copper tails. AT05-074 Aquarius DM A45 Doc M tap spout only in s/steel with pex tails, AT05-075 Aquarius DM A45 Doc M tap spout only in s/steel copper tails, AT05-076 Aquarius DM A45 Doc M tap spout only in polish s/steel with pex tails, AT05-077 Aquarius DM A45 Doc M tap spout only in polish s/steel with copper tails. AT05-080 Aquarius DM Short neck tap spout only in s/steel with PEX tails, AT05-081 Aquarius DM Short neck tap spout only in s/steel copper tails, AT05-082 Aquarius DM Short neck tap spout only in polish s/steel with PEX tails, AT05-083 Aquarius DM short neck tap spout only in polish s/steel with copper tails. AT05-084 Aquarius DM high neck tap spout in s/steel with PEX tails, AT05-085 Aquarius DM high neck tap spout in polish s/steel with PEX tails. AT05-086 Aquarius DM short pillar tap in chrome spout only with PEX tails, AT05-087 Aquarius DM tall pillar tap in chrome spout only with PEX tails.
Factor:
Dart Valley Systems Ltd.
Company Name
Dart Valley Systems Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Country
United Kingdom

View All Listings by this Company

Print This Approval


#1906390

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies - various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. The AT05-056, AT05-057 & AT05-058 spouts are intended to accommodate a filter on the outlet. No filter is supplied with the product and is not considered part of the approval. Depending on model the products are supplied with either a stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection, 10mm copper tail or 10mm stainless steel tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1906390
Expiry date:
30/06/2024
Note:
AT05-056, AT05-057 & AT05-058 models: No filter is supplied with the product and is not considered part of the approval. The products are not supplied with anything to connect between the solenoid valve (15mm compression) and the copper tail (10mm), or the stainless steel tail (10mm), or the flexible inlet hose (15mm spigot) this must be sourced by the installer. R007 applies only to models that are supplied with PEX lined connecting hose assemblies.
Size:
15mm compression (solenoid - all models). The following is model dependent - see model section: Stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection. 10mm copper tail. 10mm stainless steel tail.
Marking:
DVS and NDF on spout body
Installation Requirements:
R001 R007 R040
Model:
AT05-021 Aquarius WM straight tap spout only in s/steel 150mm with PEX tails, AT05-022 Aquarius WM straight tap spout only in s/steel 150mm copper tails, AT05-023 Aquarius WM straight tap spout only in s/steel 150mm stainless tails, AT05-024 Aquarius WM straight tap spout only in polish s/steel 150mm with PEX tails, AT05-025 Aquarius WM straight tap spout only in polish s/steel 150mm with copper tails, AT05-031 Aquarius WM straight tap spout only in s/steel 200mm with PEX tails, AT05-032 Aquarius WM straight tap spout only in s/steel 200mm copper tails, AT05-033 Aquarius WM straight tap spout only in s/steel 200mm stainless tails, AT05-034 Aquarius WM straight tap spout only in polish s/steel 200mm with PEX tails, AT05-035 Aquarius WM straight tap spout only in polish s/steel 200mm with copper tails, AT05-041 Aquarius WM straight tap spout only in s/steel 250mm with PEX tails, AT05-042 Aquarius WM straight tap spout only in s/steel 250mm copper tails, AT05-043 Aquarius WM straight tap spout only in s/steel 250mm stainless tails, AT05-044 Aquarius WM straight tap spout only in polish s/steel 250mm with PEX tails, AT05-045 Aquarius WM straight tap spout only in polish s/steel 250mm with copper tails, AT05-051 Aquarius WM straight tap spout only in s/steel 150mm filter with PEX tails - No Flange C/W ½ inch BSP, AT05-052 Aquarius WM straight tap spout only in s/steel 200mm no flange, AT05-053 Aquarius WM Straight tap spout only in s/steel 150mm Surgeons Scrub PEX tails, AT05-054 Aquarius WM Straight tap spout only in s/steel 200mm Surgeons Scrub PEX tails, AT05-055 Aquarius WM Straight tap spout only in s/steel 250mm Surgeons Scrub PEX tails, AT05-056 Aquarius WM straight tap spout only in s/steel 150mm with PEX tails (for use with filter - not supplied), AT05-057 Aquarius WM straight tap spout only in s/steel 200mm with PEX tails (for use with filter - not supplied), AT05-058 Aquarius WM straight tap spout only in s/steel 250mm with PEX tails (for use with filter - not supplied).
Factor:
Dart Valley Systems Ltd.
Company Name
Dart Valley Systems Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Country
United Kingdom

View All Listings by this Company

Print This Approval


#1906710

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated via infra-red sensor. The products are supplied with a stainless steel braided PEX lined flexible hose assembly to connect between the tap body and the solenoid valve. The spout outlets incorporate plastic aerators and the solenoid inlet incorporates a stainless steel strainer. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1906710
Expiry date:
30/06/2024
Size:
10mm spigot end connection.
Marking:
DUDLEY ON BASE OF TAP
Installation Requirements:
R001 R006 R007
Model:
Electroflo Avanti (battery powered) Electroflo Avanti (transformer powered)
Factor:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Address
Dauntless Works, PO Box 28, New Birmingham Road
Postcode
DY1 4SN
Country
Dudley,

View All Listings by this Company

Print This Approval


#1906348

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies - various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. The AT02-004, AT02-014 & AT02-024 spouts are intended to accommodate a filter on the outlet. No filter is supplied with the product and is not considered part of the approval. Depending on model the products are supplied with either a stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection, 10mm copper tail or 10mm stainless steel tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1906348
Expiry date:
30/06/2024
Note:
This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation. AT02-004, AT02-014 & AT02-024 models: No filter is supplied with the product and is not considered part of the approval. The products are not supplied with anything to connect between the solenoid valve (15mm compression) and the copper tail (10mm), or the stainless steel tail (10mm), or the flexible inlet hose (15mm spigot) this must be sourced by the installer. R007 applies only to models that are supplied with PEX lined connecting hose assemblies.
Size:
15mm compression (solenoid - all models). The following is model dependent - see model section: Stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection. 10mm copper tail. 10mm stainless steel tail.
Marking:
DVS on spout body
Installation Requirements:
R001 R007 R040 R570
Model:
AT02-001 Aquarius WM straight tap spout only in s/steel 150mm with PEX tails, AT02-002 Aquarius WM straight tap spout only in s/steel 150mm copper tails, AT02-003 Aquarius WM straight tap spout only in s/steel 150mm stainless tails, AT02-005 Aquarius WM straight tap spout only in polish s/steel 150mm with PEX tails, AT02-006 Aquarius WM straight tap spout only in polish s/steel 150mm with copper tails, AT02-011 Aquarius WM straight tap spout only in s/steel 200mm with PEX tails, AT02-012 Aquarius WM straight tap spout only in s/steel 200mm copper tails, AT02-013 Aquarius WM straight tap spout only in s/steel 200mm stainless tails, AT02-015 Aquarius WM straight tap spout only in polish s/steel 200mm with PEX tails, AT02-016 Aquarius WM straight tap spout only in polish s/steel 200mm with copper tails, AT02-021 Aquarius WM straight tap spout only in s/steel 250mm with PEX tails, AT02-022 Aquarius WM straight tap spout only in s/steel 250mm copper tails, AT02-023 Aquarius WM straight tap spout only in s/steel 250mm stainless tails, AT02-025 Aquarius WM straight tap spout only in polish s/steel 250mm with PEX tails, AT02-026 Aquarius WM straight tap spout only in polish s/steel 250mm with copper tails, AT99-087 Aquarius WM straight tap spout only in s/steel 150mm filter with PEX tails - No Flange C/W ½ inch BSP, AT99-076 Aquarius WM straight tap spout only in s/steel 200mm no flange, AT02-052 Aquarius WM Straight tap spout only in s/steel 150mm Surgeons Scrub PEX tails, AT02-053 Aquarius WM Straight tap spout only in s/steel 200mm Surgeons Scrub PEX tails, AT02-054 Aquarius WM Straight tap spout only in s/steel 250mm Surgeons Scrub PEX tails, AT02-004 Aquarius WM straight tap spout only in s/steel 150mm with PEX tails (for use with filter - not supplied), AT02-014 Aquarius WM straight tap spout only in s/steel 200mm with PEX tails (for use with filter - not supplied), AT02-024 Aquarius WM straight tap spout only in s/steel 250mm with PEX tails (for use with filter - not supplied).
Factor:
Dart Valley Systems Ltd.
Company Name
Dart Valley Systems Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Country
United Kingdom

View All Listings by this Company

Print This Approval


#1906347

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies - various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Depending on model the products are supplied with either a stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection or 10mm copper tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1906347
Expiry date:
30/06/2024
Note:
This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation. The products are not supplied with anything to connect between the solenoid valve (15mm compression) and the copper tail (10mm), or the flexible inlet hose (15mm spigot) this must be sourced by the installer. R007 applies only to models that are supplied with PEX lined connecting hose assemblies.
Size:
15mm compression (solenoid - all models). The following is model dependent - see model section: Stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection. 10mm copper tail.
Marking:
DVS on spout body
Installation Requirements:
R001 R006 R007 R570
Model:
AT03-001 Aquarius DM A32 tap spout only in s/steel with PEX tails, AT03-002 Aquarius DM A32 tap spout only in s/steel copper tails, AT03-003 Aquarius DM A32 tap spout only in polish s/steel with PEX tails, AT03-004 Aquarius DM A32 tap spout only in polish s/steel with copper tails. AT03-011 Aquarius DM A45 tap spout only in s/steel with PEX tails, AT03-012 Aquarius DM A45 tap spout only in s/steel copper tails, AT03-013 Aquarius DM A45 tap spout only in polish s/steel with PEX tails, AT03-014 Aquarius DM A45 tap spout only in polish s/steel with copper tails. AT03-021 Aquarius DM A45 Doc M tap spout only in s/steel with pex tails, AT03-022 Aquarius DM A45 Doc M tap spout only in s/steel copper tails, AT03-023 Aquarius DM A45 Doc M tap spout only in polish s/steel with pex tails, AT03-024 Aquarius DM A45 Doc M tap spout only in polish s/steel with copper tails. AT03-031 Aquarius DM Short neck tap spout only in s/steel with PEX tails, AT03-032 Aquarius DM Short neck tap spout only in s/steel copper tails, AT03-033 Aquarius DM Short neck tap spout only in polish s/steel with PEX tails, AT03-034 Aquarius DM short neck tap spout only in polish s/steel with copper tails. AT03-041 Aquarius DM high neck tap spout in s/steel with PEX tails, AT03-043 Aquarius DM high neck tap spout in polish s/steel with PEX tails. AT03-051 Aquarius DM short pillar tap in chrome spout only with PEX tails, AT03-061 Aquarius DM tall pillar tap in chrome spout only with PEX tails.
Factor:
Dart Valley Systems Ltd.
Company Name
Dart Valley Systems Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Country
United Kingdom

View All Listings by this Company

Print This Approval


#1906346

‘Classic’ range of single hole, single outlet (fixed) electronically operated, tap assemblies (chromium plated DZR brass). Flow is controlled via solenoid valve, actuated by an infra-red sensor. The spout outlet incorporates a plastic aerator. AT01-001 & AT01-11 models have a stainless steel braided PEX lined flexible inlet hose assembly with 15mm spigot end connection. AT01-002 & AT01-012 models have a 10mm copper tail. AT01-003 & AT01-013 models have a 10mm stainless steel tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1906346
Expiry date:
30/06/2024
Note:
This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation. The products are not supplied with anything to connect between the solenoid valves (15mm compression) and the copper tail (10mm), or the stainless steel tail (10mm), or the flexible inlet hose (15mm spigot) this must be sourced by the installer. R007 applies only to models that are supplied with PEX lined connecting hose assemblies.
Size:
15mm compression (solenoid - all models). AT01-001 & AT01-11 models have a stainless steel braided PEX lined flexible inlet hose assembly with 15mm spigot end connection. AT01-002 & AT01-012 models have a 10mm copper tail. AT01-003 & AT01-013 models have a 10mm stainless steel tail.
Marking:
DVS on spout body
Installation Requirements:
R001 R006 R007 R570
Model:
Classic Range: AT01-001, AT01-002 & AT01-003. Classic Range (Swan Spout): AT01-011, AT01-012 & AT01-013.
Factor:
Dart Valley Systems Ltd.
Company Name
Dart Valley Systems Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Country
United Kingdom

View All Listings by this Company

Print This Approval


#1912319

Sensor control unit, flow is controlled using a solenoid valve assembly and is activated via infra-red non touch operation. The Art 30622 model has an in-line spherical valve on each inlet, as well as an approved check valve cartridge, however the complete assemblies have not been fully tested to demonstrate that they provide backflow protection The Art 30629 & 33725 model is supplied with two angled isolation valves and two stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections, which are intended to connect to the tee piece installed prior to the solenoid valve. The tee piece inlets incorporate a combined washer and stainless steel strainer and an approved check valve cartridge, however the complete assemblies have not been fully tested to demonstrate that they provide backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1912319
Expiry date:
31/12/2024
Note:
R009 applies to the Art 30629 & 33725 model only.
Size:
See model
Marking:
Gessi logo on sensor plate.
Installation Requirements:
R001 R009 R010 R040
Model:
Art 30622 (sensor control unit) - ½” BSP (M). Art 30629 & 33725 (wall mounted sensor control unit) - ½” BSP (F).
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#1907319

Range of single hole, single outlet, fixed electronically controlled tap assemblies (chromium plated brass), incorporating a solenoid valve controlling the flow which is actuated via infrared sensor. The spouts incorporate adjustable combined plastic and rubber aerators and the inlets incorporate plastic strainers. Temperature can be set via an access point on the side of the valve. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1907319
Expiry date:
31/07/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” end connections.
Marking:
HEWI logo on body.
Installation Requirements:
R001 R006 R009 R010 R570
Model:
HEWI SENSROIC Range: HEWI AQ 800 – AQ1.12S20040 (240v supply) HEWI AQ 800 – AQ1.12S20140 (battery) HEWI AQ 950 – AQ1.12S21040 (240v supply) HEWI AQ 950 – AQ1.12S21140 (battery) Model codes have changed from June 2021: AQ1.12S200yy AQ1.12S20060-Fc. AQ1.12S201yy AQ1.12S20160-Fc. AQ1.12S210yy AQ1.12S21060-Fc. AQ1.12S211yy AQ1.12S21160-Fc. yy denotes surface finish of faucet 40 = chrome 60 = powder coating (colour options defined under -Fc.) XA = stainless steel finish -Fc. Denotes optional powder-coated surface finishes in combination with different lever options e.g. DC = matt black coloured.
Manufacturer:
Hewi Heinrich Wilke GmbH
Company Name
Hewi Heinrich Wilke GmbH
Address
Prof.-Bier-Straße 1-5 34454 Bad Arolsen
Country
Germany

View All Listings by this Company

Print This Approval


#1907320

Range of single hole, single outlet, fixed electronically controlled tap assemblies (chromium plated brass), incorporating a solenoid valve controlling the flow which is actuated via infrared sensor. The spouts incorporate plastic aerators and the inlets incorporate plastic strainers. Temperature can be set via an access point on the side of the valve. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1907320
Expiry date:
31/07/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” end connections.
Marking:
HEWI logo on body.
Installation Requirements:
R001 R006 R009 R010 R570
Model:
HEWI SENSROIC Range: HEWI AQ 477/801 – AQ1.12S22040 (240v supply) HEWI AQ 477/801 – AQ1.12S22140 (battery) HEWI AQ 162 – AQ1.12S23040 (240v supply) HEWI AQ 162 – AQ1.12S23140 (battery) Product will change to the following codes June 2021: AQ1.12S220yy AQ1.12S22060-Fc AQ1.12S221yy AQ1.12S22160-Fc AQ1.12S230yy AQ1.12S23060-Fc AQ1.12S231yy AQ1.12S23160-Fc yy defines surface finish and can be replaced with: 40 - Chrome 60 - Powder coating (colour options defined under - Fc) XA - Stainless steel finish Fc denotes optional powder coated surface finishes in combination with different lever options, e.g. DC - matt black coloured.
Manufacturer:
Hewi Heinrich Wilke GmbH
Company Name
Hewi Heinrich Wilke GmbH
Address
Prof.-Bier-Straße 1-5 34454 Bad Arolsen
Country
Germany

View All Listings by this Company

Print This Approval


#1910020

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated stainless steel body). Flow is controlled by a solenoid valve that is activated via an infrared sensor. The spout outlets incorporate plastic aerators. Models with two inlets are supplied with hoses that incorporate stainless steel strainers and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models with single inlets incorporate stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1910020
Expiry date:
31/10/2024
Note:
R010 only applies to models Extreme 1000LFB, Extreme 1000LFE, Extreme 1000LFB AISI316 & Extreme 1000LFE AISI316 models.
Size:
Models with one inlet: 10mm spigot connection. Models with two inlets: stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜” BSP captive nut.
Marking:
Stern logo on top of tap body
Installation Requirements:
R001 R006 R009 R010
Model:
Models with one inlet: Extreme LFB, Extreme LFE, Extreme LFB AISI316 & Extreme LFE AISI316. Models with two inlets: Extreme 1000LFB, Extreme 1000LFE, Extreme 1000LFB AISI316 & Extreme 1000LFE AISI316.
Factor:
Y Stern Engineering (1989) Ltd
Company Name
Y Stern Engineering (1989) Ltd
Address
15 Gan Rave Blud 8122217 Yavne Israel

View All Listings by this Company

Print This Approval


#2003049

Range of deck mounted, single hole, single outlet (fixed) electronically controlled combination tap assembly (chromium plated brass). The flow is controlled via solenoid valve which is actuated by an infra-red sensor and the temperature is controlled independently via a single lever operating member (388MCHLH15, 398MCHLH15, 488MCHLH15 & 498MCHLH15). The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2003049
Expiry date:
31/03/2025
Note:
R010 only applies to models 388MCHLH15, 398MCHLH15, 488MCHLH15 & 498MCHLH15
Size:
15mm compression adapter.
Marking:
DELABIE on end of spout and flow straightener housing.
Installation Requirements:
R001 R006 R009 R010
Model:
38801515, 39801515, 48801515, 49801515, 388MCHLH15, 398MCHLH15, 488MCHLH15, 498MCHLH15.
Factor:
Delabie Ltd.
Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Country
Oxfordshire
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval


#1911337

Range of deck mounted single hole, single outlet (fixed) single feed electronically controlled tap assemblies (chromium plated brass). Flow is controlled via a solenoid valve (housed within a control unit) activated via an infra-red sensor. The inlet to the control unit incorporates a plastic flow regulator. The spout outlet incorporates a plastic or metal aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1911337
Expiry date:
30/11/2024
Size:
⅜” BSP (M) (to control unit)
Marking:
TOTO on spout and cover of control unit
Installation Requirements:
R001 R006 R007
Model:
DLE124DHE4 (control unit) To be used in conjunction with the following tap spouts: TENA40AWV105 (114mm height spout), DLE110ANE4 (169mm height spout), DLE110A2NE4 (332mm height spout).
Manufacturer:
TOTO Europe GmbH
Company Name
TOTO Europe GmbH
Address
Zollhof 2 40211 Düsseldorf Germany
Phone
+49 211 273080

View All Listings by this Company

Print This Approval


#2003302

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2003302
Expiry date:
31/03/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
TCK on body.
Installation Requirements:
R001 R006 R010
Model:
TK-201LT1 TK-201LT3 TK-201LT22 TK-201LT24
Manufacturer:
Xiamen OLT Co Ltd
Company Name
Xiamen OLT Co Ltd
Address
No 155 Dutian Road Jimei District
Country
Xiamen

View All Listings by this Company

Print This Approval


#1912055

Range of single hole, single outlet (fixed) electronically operated tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve which is actuated via an infrared sensor on the spout. The spout incorporates a plastic flow straightener. Adjustable manual temperature control via a lever type operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1912055
Expiry date:
31/12/2024
Size:
15mm compression
Marking:
Delabie on spout.
Installation Requirements:
R001 R006 R010
Model:
Binoptic Mix 378MCH15 & Binoptic 37801515
Factor:
Delabie Ltd.
Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Country
Oxfordshire
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval


#1910041

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve that is activated via an infrared sensor. Certain models incorporate a mixer spout which incorporates a manual temperature control by a single lever on the side of the body. The models are also supplied with stainless steel braided PEX lined flexible hose connectors and the spout outlets also incorporate a plastic flow straighter. Models are also supplied with stainless steel strainers located on the inlet of the solenoid. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1910041
Expiry date:
31/10/2024
Note:
R010 only applies to models with one inlet
Size:
15mm Compression or ½” BSP (M)
Marking:
Delabie on electric box.
Installation Requirements:
R001 R007 R010 R040
Model:
379MCH15 379ENC15 379DER15 379D1315 379112 Models added 08/01/2023 379MCHB 379ENCB 379DERB
Factor:
Delabie Ltd.
Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Country
Oxfordshire
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval


#1912035

Range of single hole, single outlet, electronically operated tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve and activated via an infra-red sensor. The inlet hoses incorporate a stainless-steel strainer and an isolation valve and the spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1912035
Expiry date:
31/12/2024
Size:
Stainless steel braided, PEX lined hose assemblies with 15mm compression end connections
Marking:
Cistermiser on base of spout, battery housing and label on coil.
Installation Requirements:
R001 R006 R009
Model:
VT - Vectatap, VT - LT Vectatap LT, VT - LT2 Vectatap.
Manufacturer:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate 59/69 Reading Road
Postcode
RG5 3AN
Country
Woodley
Phone
+44 118 969 1611 Fax: 0118 944 1426

View All Listings by this Company

Print This Approval


#2003383

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2003383
Expiry date:
31/03/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
BRISTAN ON TAP BODY
Installation Requirements:
R001 R006 R010
Model:
IRBS2-CP COMBINATION TAP ASSEMBLIES
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Country
Tamworth
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2007011

Single hole, single outlet, fixed electronically controlled tap assembly with brass bodies (various finishes), incorporating a solenoid valve controlling the flow which is activated via an infrared sensor. The spout outlet incorporates a plastic aerator. The product is supplied with a stainless steel braided PEX lined flexible hose assembly and a metal backnut. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2007011
Expiry date:
31/07/2025
Size:
½” BSP (M) (to solenoid)
Marking:
+TSL on body
Installation Requirements:
R001 R006 R009
Model:
TSL.R020 Ribbon Tap (mains or battery) Finishes available: Polished chrome. Brushed stainless steel PVD in copper, brass, bronze, black or satin.
Manufacturer:
The Splash Lab
Company Name
The Splash Lab
Postcode
SK7 6DA
Phone
0161 482 7000

View All Listings by this Company

Print This Approval


#1910069

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated stainless steel body). Flow is controlled by a solenoid valve that is activated via an infrared sensor. The spout outlets incorporate plastic aerators. Models with two inlets are supplied with hoses that incorporate stainless steel strainers and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models with single inlets incorporate stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1910069
Expiry date:
31/10/2024
Note:
R010 only applies to models DB186x-y, DB181x-y, DB180x-y, DB181-316 & DB186-316
Size:
Models with one inlet: 10mm spigot connection. Models with two inlets: stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜” BSP captive nut.
Marking:
DOLPHIN LOGO ON tap body
Installation Requirements:
R001 R006 R009 R010
Model:
Models with one inlet: DOLPHIN BLUE DB180x-y, DOLPHIN BLUE DB185x-y, DOLPHIN BLUE DB180-316 & DOLPHIN BLUE DB185-316. Models with two inlets: DOLPHIN BLUE DB181x-y, DOLPHIN BLUE DB186x-y, dolphin blue DB181-316 & DOLPHIN BLUE DB186-316.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2003387

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2003387
Expiry date:
31/03/2025
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
DTC & DEVA on body.
Installation Requirements:
R001 R006 R010
Model:
SENSOR7/D
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2009315

Single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass), flow is controlled by a solenoid valve activated via an infra-red sensor. The tap connects to the solenoid valve via a copper tail with a ½” BSP (F) captive nut and a fibre washer. The product is supplied with a combined TPE washer and stainless steel strainer to be installed on the inlet to the solenoid. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2009315
Expiry date:
30/09/2025
Note:
The solenoid valve is to be installed where light is excluded.
Size:
½” BSP (M) (to solenoid valve)
Marking:
INTA, date of manufacture (WW/YY) and model on body.
Installation Requirements:
R001 R006
Model:
IR120CP.1 (battery operated) & IR121CP.1 (mains operated)
Factor:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Country
United Kingdom
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2009342

Single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass), flow is controlled by a solenoid valve activated via an infra-red sensor. The tap connects to the solenoid valve via a copper tail with a ½” BSP (F) captive nut and a fibre washer. The product is supplied with a combined TPE washer and stainless steel strainer to be installed on the inlet to the solenoid. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2009342
Expiry date:
30/09/2025
Note:
The solenoid valve is to be installed where light is excluded.
Size:
½” BSP (M) (to solenoid valve)
Marking:
INTA, date of manufacture (WW/YY) and model on body.
Installation Requirements:
R001 R006
Model:
SF2610CP (BATTERY OPERATED) & SF2611CP (MAINS OPERATED) ELECTRONICALLY CONTROLLED TAP ASSEMBLIES
Factor:
Twyford Bathrooms Ltd
Company Name
Twyford Bathrooms Ltd
Address
Lawton Road Alsager Stoke On Trent
Postcode
ST7 2DF

View All Listings by this Company
Manufacturer:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Country
United Kingdom
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2009346

Single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass), flow is controlled by a solenoid valve activated via an infra-red sensor. The tap connects to the solenoid valve via a copper tail with a ½” BSP (F) captive nut and a fibre washer. The product is supplied with a combined TPE washer and stainless steel strainer to be installed on the inlet to the solenoid. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2009346
Expiry date:
30/09/2025
Note:
The solenoid valve is to be installed where light is excluded.
Size:
½” BSP (M) (to solenoid valve)
Marking:
INTA, date of manufacture (WW/YY) and model on body.
Installation Requirements:
R001 R006
Model:
SCBW119 (BATTERY OPERATED) ELECTRONICALLY CONTROLLED TAP ASSEMBLIES
Factor:
The Sanitaryware Company
Company Name
The Sanitaryware Company
Address
Montagu Court Kettering Venture Park Kettering Parkway
Postcode
NN15 6XR
Country
Kettering

View All Listings by this Company
Manufacturer:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Country
United Kingdom
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2011060

Range of single hole, single outlet (fixed) electronically operated, tap assemblies (chromium plated brass). Flow is controlled via solenoid valve and actuated by a touch sensor. The spout outlets incorporate a plastic aerator, supplied with stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2011060
Expiry date:
30/11/2025
Size:
Stainless steel braided flexible hose assembly incorporating polyethylene liner with 3/8” BSP captive nut.
Marking:
Stern logo on top of tap.
Installation Requirements:
R001 R006 R009 R010
Model:
Battery powered: Extreme Touch B & Sensor Touch B. Transformer powered: Sensor Touch E & Extreme Touch E.
Manufacturer:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2011311

Single hole, single outlet (fixed) combination tap assembly (stainless steel). The flow is controlled by a solenoid valve that is actuated via an infra-red sensor on the spout. The inlet to the solenoid valve incorporates a stainless steel strainer. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2011311
Expiry date:
30/11/2025
Size:
Stainless steel braided EPDM lined flexible hose assembly incorporating ½” captive nut end connection.
Marking:
Bestware on body.
Installation Requirements:
R001 R006
Model:
HMST
Factor:
Bestware Hardware Production Co. Ltd.
Company Name
Bestware Hardware Production Co. Ltd.

View All Listings by this Company

Print This Approval


#2011069

Range of wall mounted, two hole, single outlet (fixed) mains electric or battery controlled tap assemblies (chromium plated brass) incorporating approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection . The flow is controlled via a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The tap is supplied with spherical valves for both hot and cold inlets. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2011069
Expiry date:
30/11/2025
Size:
½” Male BSP.
Marking:
Model number and date (WW/YY) on underside of tap. INTA on operating member.
Installation Requirements:
R001 R010 R040
Model:
Mains Operated: HTMWMMCP HTMWMMRS - Removable Spout Battery Operated: HTMWMBRS – Removable Spout HTMWMBCP
Manufacturer:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Country
United Kingdom
Phone
+44 1889 272 199

View All Listings by this Company

Print This Approval


#2012008

Single hole, single outlet, fixed electronically controlled tap assemblies with brass bodies (chrome plated), incorporating a solenoid valve controlling the flow which is activated via an infrared sensor. The spout outlet incorporates a plastic aerator, and the product is supplied with a metal backnut. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2012008
Expiry date:
31/12/2025
Size:
½” BSP (M)
Marking:
MCM and product code on rear of tap body
Installation Requirements:
R001 R006 R008
Model:
Code 7035B – Electronic basin tap powered by battery Code 7035C – Electronic basin tap powered by electricity Models added June 2023 703500 CR - Electronic basin tap powered by electricity 703500 BM - Electronic basin tap powered by electricity 703500 NM - Electronic basin tap powered by electricity 703500 PG - Electronic basin tap powered by electricity 703500 PC - Electronic basin tap powered by electricity 703500 PM - Electronic basin tap powered by electricity 703501 CR - Electronic basin tap powered by battery 703501 BM - Electronic basin tap powered by battery 703501 NM - Electronic basin tap powered by battery 703501 PG - Electronic basin tap powered by battery 703501 PC - Electronic basin tap powered by battery 703501 PM - Electronic basin tap powered by battery
Manufacturer:
Rubinetterie MCM Intl. Srl.
Company Name
Rubinetterie MCM Intl. Srl.
Address
Via Dell'Acacia 54 I-28021 Borgomanero Italy

View All Listings by this Company

Print This Approval


#2102801

Range of wall mounted, electronically controlled spout outlets with stainless steel bodies. Flow is controlled via a solenoid valve activated via an infra-red sensor. Models AT07-102 and AT07-103 are supplied with a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2102801
Expiry date:
28/02/2026
Size:
15mm compression
Marking:
AT07-101 and AT07104: DVS on underside of spout. AT07-102 and AT103: DVS on end of spout.
Installation Requirements:
R001 R040
Model:
AT07-101 AT07-102 AT07-103 AT07-104
Manufacturer:
Dart Valley Systems Ltd.
Company Name
Dart Valley Systems Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2012304

Range of single hole, single outlet (fixed) electronically operated tap assemblies incorporating brass bodies (various finishes). Flow is controlled via solenoid valve and actuated by a touch sensor. The hose inlet incorporates a flow restrictor and the spout outlets incorporate a plastic aerator. Maximum working pressure 7.5 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2012304
Expiry date:
31/12/2025
Size:
½” BSP (M).
Marking:
+TSL (company logo) on body Models added December 2023: +TSL logo on spout.
Installation Requirements:
R001 R006 R009 R008
Model:
TSL.960, TSL.990. Models added December 2023: TSL.940, TSL.980. All models are available in the following finishes: Brushed stainless-steel finish or Brushed PVD Coated finishes in black, brass, bronze or copper. The TSL 940 & 980 models added December 2023 are also available in the following finish: Chromium plated brass.
Manufacturer:
The Splash Lab
Company Name
The Splash Lab
Postcode
SK7 6DA
Phone
0161 482 7000

View All Listings by this Company

Print This Approval


#2012069

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with a pull-out spray mechanism. Flow is controlled via a ceramic cartridge headwork with a single lever operating member incorporating an infra-red sensor on the swivel arm which operates a solenoid valve. The spout outlet incorporates a plastic aerator and a hand spray mechanism, and the product is supplied with metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2012069
Expiry date:
31/12/2025
Size:
Stainless steel braided PE-X lined flexible hose assemblies with 1/2" BSP captive nut.
Marking:
LOTA on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
63198-0201 Kitchen Mixer Chrome 63198-0204 Kitchen Mixer Brushed Nickel 63198-026801 Kitchen Mixer Matt Black 63198-024408 Kitchen Mixer Brushed Brass
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022
Country
China

View All Listings by this Company

Print This Approval


#2010067

Range of deck mounted, electronically operated combination tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve which is actuated via an infrared sensor on the spout. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2010067
Expiry date:
31/10/2025
Size:
10mm spigot
Marking:
Stern logo and WRAS on base of tap
Installation Requirements:
R001 R006
Model:
Csaba B (powered by battery) Csaba E (powered by transformer)
Factor:
Y Stern Engineering (1989) Ltd
Company Name
Y Stern Engineering (1989) Ltd
Address
15 Gan Rave Blud 8122217 Yavne Israel

View All Listings by this Company

Print This Approval


#2012096

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with a pull-out spray mechanism. Flow is controlled via a ceramic cartridge headwork with a single lever operating member incorporating an infra-red sensor on the swivel arm which operates a solenoid valve. The spout outlet incorporates a plastic aerator and a hand spray mechanism, and the product is supplied with metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2012096
Expiry date:
31/12/2025
Size:
Stainless steel braided PE-X lined flexible hose assemblies with 1/2" BSP captive nut.
Marking:
CLEARWATER ON TAP BASE
Installation Requirements:
R001 R006 R009 R010
Model:
GAL10CP, GAL10BN, GAL10MB & GAL10BB COMBINATION TAP ASSEMBLIES
Factor:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955

View All Listings by this Company

Print This Approval


#2104025

Single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The product is supplied with a stainless-steel braided EPDM lined flexible hose assembly for installation between the solenoid valve and the tap body. The spout outlet incorporates a plastic aerator with built in flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2104025
Expiry date:
30/04/2026
Size:
½” BSP (M)
Marking:
Top-Rinse (brand of Zhejiang Sunmixer Sanitary Ware Co.,Ltd) and WRAS on base of spout.
Installation Requirements:
R001 R006
Model:
MS42D
Manufacturer:
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company

Print This Approval


#2012100

single hole, single outlet (swivel) combination tap assemblies (various finishes) with a pull-out spray mechanism. Flow is controlled via a ceramic cartridge headwork with a single lever operating member incorporating an infra-red sensor on the swivel arm which operates a solenoid valve. The spout outlet incorporates a plastic aerator and a hand spray mechanism, and the product is supplied with metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2012100
Expiry date:
31/12/2025
Size:
Stainless steel braided PE-X lined flexible hose assemblies with 1/2" BSP captive nut.
Marking:
"A" Aqualla logo on body
Installation Requirements:
R001 R006 R009 R010
Model:
SEN-KM COMBINATION TAP ASSEMBLIES Chrome
Factor:
Aqualla Brassware Ltd
Company Name
Aqualla Brassware Ltd
Address
Unit 3 & 4 16 Crawfordsburn Road Newtownards
Postcode
BT234EA
Country
Co Down
General Email
stuart@aquallabrassware.com

View All Listings by this Company

Print This Approval


#2110310

Deck mounted single hole, single outlet (fixed) electronically controlled tap assembly (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Tempearture is controlled from a separate control unit incorporating a thermostatic cartridge, which is operated by a single lever on the side of the unit. The spout connects to the unit via a (transparent) PEX-b pipe. The inlets of the control unit incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet of the unit incorporates a plastic flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2110310
Expiry date:
31/10/2026
Size:
½” BSP (M) (to control unit).
Marking:
Toto on spout. Toto and model on adhesive label on control unit.
Installation Requirements:
R001 R006 R007 R010
Model:
TLP01701G (Spout with IR sensor) TLP01702E1 (Control unit with thermostatic mixer)
Factor:
TOTO Europe GmbH
Company Name
TOTO Europe GmbH
Address
Zollhof 2 40211 Düsseldorf Germany
Phone
+49 211 273080

View All Listings by this Company

Print This Approval


#1910070

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated stainless steel body). Flow is controlled by a solenoid valve that is activated via an infrared sensor. The spout outlets incorporate plastic aerators. Models with two inlets are supplied with hoses that incorporate stainless steel strainers and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models with single inlets incorporate stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1910070
Expiry date:
31/10/2024
Note:
R010 only applies to models R311_BAT & R311_SEC models.
Size:
Models with one inlet: 10mm spigot connection. Models with two inlets: stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜” BSP captive nut.
Marking:
Duten on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
Models with one inlet: R310_BAT, R310_SEC Models with two inlets: R311_BAT, R311_SEC
Factor:
Duten
Company Name
Duten
Postcode
France

View All Listings by this Company

Print This Approval


#2111312

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (brass body - various finishes, see model). Flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The inlet hose incorporates an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2111312
Expiry date:
30/11/2026
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ⅜” captive nut end connection.
Marking:
KEUCO on body
Installation Requirements:
R001 R006 R009
Model:
51613xx01zz - Elegance Where: xx = finish: 01 - chrome plated. 02 - polished bronze. 03 - brushed bronze. 04 - polished nickel. 05 - brushed nickel. 07 - stainless steel finish. 12 - polished black chrome. 13 - brushed black chrome. 17 - aluminium finish. zz = power supply: 00 - with battery 6V supply. 01 - with mains supply 230V (230V/6V).
Manufacturer:
KEUCO GmbH
Company Name
KEUCO GmbH
Address
Oesestr 36, 58675 Hemer
Country
Germany

View All Listings by this Company

Print This Approval


#2111313

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (brass body - various finishes, see model). Flow is controlled by a solenoid valve activated via an infra-red sensor. The product incorporates a manual temperature control operated by a single lever on the side of the body. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2111313
Expiry date:
30/11/2026
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
KEUCO on body
Installation Requirements:
R001 R006 R009 R010
Model:
51611xxyyzz - Elegenace Where: xx = finish: 01 - chrome plated. 02 - polished bronze. 03 - brushed bronze. 04 - polished nickel. 05 - brushed nickel. 07 - stainless steel finish. 12 - polished black chrome. 13 - brushed black chrome. 17 - aluminium finish. yy = pop-up waste: 00 - supplied with pop-up waste. 01 - without pop-up waste. zz = power supply: 00 - with battery 6V supply. 01 - with mains supply 230V (230V/6V).
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Country
Germany
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2110026

A range of wall mounted two hole single outlet (fixed) electronically controlled tap assemblies with brass bodies (various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor on the underside of the tap. The inlets of the function block incorporate stainless steel strainers, plastic silencers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2110026
Expiry date:
31/10/2026
Note:
The 16 180 180 Axor Basic set is not approved in its own right.
Size:
¾” BSP (F) to basic set
Marking:
AXOR (brand of Hansgrohe SE) on face plate.
Installation Requirements:
R001 R010 R040 R570
Model:
Concealed Valve: 16 180 180 Axor Basic set. Which must be installed with one of the following trim sets: 39 117 xxx Axor Citterio with spout 160 mm. 39 118 xxx Axor Citterio with spout 220 mm. 38 119 xxx Axor Uno with spout 165 mm. 38 120 xxx Axor Uno with spout 225 mm. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval


#2110374

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies comprising of a concealed brass body and a separate spout and trim set (chromium plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The inlets (within the) concealed body incorporate a plastic filter and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2110374
Expiry date:
31/10/2026
Note:
The 44665 concealed body is not approved in its own right.
Size:
½” BSP (F)
Marking:
Gessi on backplate
Installation Requirements:
R001 R010 R040
Model:
44665 (concealed body) Which must be used in conjunction with the following spout trim sets: 54014, 54114, 54214, 54314, 54414, 54015, 54115, 54215, 54315, 54415.
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2111016

Wall mounted, single hole, single outlet (fixed) electronically controlled tap assembly (various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2111016
Expiry date:
30/11/2026
Size:
½” BSP (M)
Marking:
Zhong Rui Yi Sheng on wall plate
Installation Requirements:
R001 R009 R040 R570
Model:
WJ0513XX XX denotes the finish and can be replaced with any of the following: No Code = Chrome BBR = Brushed Brass BBL = Brushed Black MB = Matt Black SS = Stainless Steel
Manufacturer:
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Company Name
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Address
Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company

Print This Approval


#2111017

Deck mounted, single hole, single outlet (fixed) electronically controlled tap assembly (various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Product supplied with metal backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2111017
Expiry date:
30/11/2026
Size:
½” BSP (M)
Marking:
Zhong Rui Yi Sheng on spout
Installation Requirements:
R001 R006 R009 R570
Model:
WJ0149XX XX denotes the finish and can be replaced with any of the following: No Code = Chrome BBR = Brushed Brass BBL = Brushed Black MB = Matt Black SS = Stainless Steel
Manufacturer:
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Company Name
Zhejiang Zhong Rui Yi Sheng Trading Co. Ltd
Address
Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave., JiaojiangDistrict, Taizhou City, Zhejiang Province, China.(318000)

View All Listings by this Company

Print This Approval


#2111053

Deck mounted, single hole, single outlet (fixed) electronically controlled tap assembly (various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Product supplied with metal backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2111053
Expiry date:
30/11/2026
Size:
½” BSP (M)
Marking:
JTP on spout
Installation Requirements:
R001 R006 R009 R570
Model:
20149, 230149BBR, 270149BBL, 280149MB & IX0149 COMBINATION TAP ASSEMBLIES
Factor:
Just Taps Plus UK Ltd
Company Name
Just Taps Plus UK Ltd
Address
Unit 3, Tomo Industrial Estate, Packet Boat Lane, Cowley.
Postcode
UB8 2JP
Country
Uxbridge.
Phone
01895 44 22 11
General Email
info@jtpuk.co.uk

View All Listings by this Company

Print This Approval


#2111054

Wall mounted, single hole, single outlet (fixed) electronically controlled tap assembly (various finishes). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2111054
Expiry date:
30/11/2026
Size:
½” BSP (M)
Marking:
JTP on wall plate
Installation Requirements:
R001 R009 R040 R570
Model:
20513, 230513BBR, 270513BBL, 280513MB & IX0513 COMBINATION TAP ASSEMBLIES
Factor:
Just Taps Plus UK Ltd
Company Name
Just Taps Plus UK Ltd
Address
Unit 3, Tomo Industrial Estate, Packet Boat Lane, Cowley.
Postcode
UB8 2JP
Country
Uxbridge.
Phone
01895 44 22 11
General Email
info@jtpuk.co.uk

View All Listings by this Company

Print This Approval


#2112048

A range of single-hole, single outlet (fixed (model 62816) or swivel (models 63407)) electronically controlled tap assemblies with brass bodies in various finishes (see models). Flow is controlled by a solenoid valve activated via an infra-red sensor and a ceramic cartridge with a single lever operating members controlling both the flow and temperature for all models excluding 62816, which uses a mixer to control the temperature only with a single lever operating member. The spout outlets incorporate plastic aerators. All models (excluding 63407) incorporate a separate approved check valve cartridge on the inlet, verified by test (suitable for backflow protection against Fluid Category 2), The inlets of all models incorporate stainless steel strainers. Maximum working pressure 5.0 bar Maximum working temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2112048
Expiry date:
31/12/2026
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection (63407 models only) Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection attached to check valve bodies with 1/2" BSP female inlets (62816 models only)
Marking:
Lota on operating member (all models excluding 62816) Lota on body (model 62816 only)
Installation Requirements:
R001 R006 R009 R010
Model:
63407-01X 63389-51X 62816-51X X Denotes the difference in surface finish; 01 - Chrome 6801 - Matt Black 4408 - Brushed Brass 0402 - Brushed Nickel PVD 5804 - Heirloom Silver 08 - Stainless Steel 04 - Brushed Nickel
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022
Country
China

View All Listings by this Company

Print This Approval


#2112049

Single-hole, single outlet, swivel electronically controlled tap assembly with a brass body in various finishes (see model). Flow is controlled by a solenoid valve activated via an infra-red sensor and a ceramic cartridge with a single lever operating member controlling both the flow and temperature. The spout outlet incorporates a pull-out spray with a plastic aerator. The inlets incorporate approved check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2), and a stainless-steel strainer Maximum working pressure 5 bar. Maximum working temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2112049
Expiry date:
31/12/2026
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection attached to check valve bodies with 1/2" BSP female inlets
Marking:
Lota on operating member
Installation Requirements:
R001 R009 R090
Model:
63391-01X X Denotes the difference in surface finish; 01 - Chrome 6801 - Matt Black 4408 - Brushed Brass 0402 - Brushed Nickel PVD 5804 - Heirloom Silver 08 - Stainless Steel 04 - Brushed Nickel
Manufacturer:
Xiamen Lota International Co Ltd
Company Name
Xiamen Lota International Co Ltd
Address
No. 61 Xing Nan Road Jimei District Xiamen, 361022
Country
China

View All Listings by this Company

Print This Approval


#2201325

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass or stainless steel bodies). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2201325
Expiry date:
31/01/2027
Size:
½” BSP (M)
Marking:
Dolphin Solutions logo (a Dolphin) on body.
Installation Requirements:
R001 R040
Model:
DS120 Series InForm SMART taps DSaaa.bbb.c.dd Where ‘aaa’ denotes the mounting type and can be replaced with: DS121 - thru panel mounted DS122 - wall plate mounted Where ‘bbb’ denotes the projection of the spout from wall to spout outlet in mm: Range 100mm - 275mm in 25mm increments Where ‘c’ denotes the material finish and can be replace with: 1 - brushed/satin 2 - mirror polished 3 - PVD on brushed/satin 4 - PVD on mirror polished 5 - powder coated (PC) Where ‘dd’ is a numerical code between .00-.99 which denotes the colour of the finished surface. This is only present and applicable on PVD (where ‘d’ is 3 or 4) or PC (where ‘d’ is 5) material finish options. Models may include an additional .R suffix which denotes that the tap is supplied without the rosette.
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2203010

Range of single hole, single outlet, fixed, electronically controlled tap assemblies with brass bodies (various finishes), incorporating an electronic cartridge controlling the flow which is activated via an infrared sensor (either battery or mains powered). Models 31 171 xxx & 31 173 xxx incorporates a manually operated temperature control. The inlet adapters incorporate stainless steel filters and single check valve cartridges verified by test (suitable for backflow protection against Fluid Category 2 ). The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2203010
Expiry date:
31/03/2027
Size:
Stainless steel braided, PEX lined flexible hose assemblies with 3/8” BSP captive nuts with a check valve adapter which has a 3/8” BSP (F) inlet.
Marking:
Hansgrohe on front of body.
Installation Requirements:
R001 R006 R009 R010 R570
Model:
Hansgrohe Focus Electronic basin mixer with temperature control: 31 171 xxx - battery-operated 31 173 xxx - 230 V mains connection Hansgrohe Focus Electronic basin mixer with temperature pre-adjustment: 31 172 xxx - battery-operated 31 174 xxx - 230 V mains connection Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval


#2203324

Wall mounted, single hole, single outlet (fixed) electronically controlled tap assembly with stainless steel body. The flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet incorporates a flow regulator and the spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2203324
Expiry date:
31/03/2027
Size:
Control box: ½” BSP (M). Tap: Stainless steel braided PEX lined hose with ½” BSP captive nut end connections
Marking:
“Initial” on front of control unit Company name, address, year of manufacturer (YYYY) and other technical information on rear of control unit.
Installation Requirements:
R001 R007 R040 R557
Model:
573671
Factor:
Rentokil Initial 1927 plc
Company Name
Rentokil Initial 1927 plc
Address
Compass House Manor Royal Crawley West Sussex
Postcode
RH10 9PY
Country
United Kingdom

View All Listings by this Company
Manufacturer:
Dudley Industries Ltd
Company Name
Dudley Industries Ltd
Address
Preston Road Lytham Lancashire
Postcode
FY8 5AT

View All Listings by this Company

Print This Approval


#2203351

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies with brass bodies (various finishes). Flow is controlled by a solenoid valve activated via an infra-red sensor either battery or power supply. The product incorporates a manual temperature control operated by a single lever on the side of the body. The inlet hoses incorporate an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2203351
Expiry date:
31/03/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Keuco on body
Installation Requirements:
R001 R006 R009 R010 R570
Model:
59511 xx1100 59512 xx1100 Where: xx = finish: 01 - chrome plated. 02 - polished bronze. 03 - brushed bronze. 04 - polished nickel. 05 - brushed nickel. 07 - stainless steel finish. 12 - polished black chrome. 13 - brushed black chrome. 17 - aluminium finish. 37 – black matt
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Country
Germany
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2203352

Deck mounted, single hole, single outlet (fixed) electronically controlled tap assembly with stainless steel body. The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2203352
Expiry date:
31/03/2027
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection.
Marking:
“Initial” on front of control unit Company name, address, year of manufacturer (YYYY), contry of manufacturer, Model number and CE marking on rear of control unit.
Installation Requirements:
R001 R006 R009 R557
Model:
573672
Factor:
Rentokil Initial 1927 plc
Company Name
Rentokil Initial 1927 plc
Address
Compass House Manor Royal Crawley West Sussex
Postcode
RH10 9PY
Country
United Kingdom

View All Listings by this Company
Manufacturer:
Dudley Industries Ltd
Company Name
Dudley Industries Ltd
Address
Preston Road Lytham Lancashire
Postcode
FY8 5AT

View All Listings by this Company

Print This Approval


#2011108

Range of wall mounted, two hole, single outlet (fixed) battery controlled tap assemblies (chromium plated brass) incorporating approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection .The flow is controlled via a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The tap is supplied with spherical valves for both hot and cold inlets. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2011108
Expiry date:
30/11/2025
Size:
½” Male BSP.
Marking:
TWYFORD on operating member.
Installation Requirements:
R001 R010 R040
Model:
Battery Operated: SF1130CP – Removable Spout SF1129CP

Print This Approval


#2204330

Single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The solenoid is supplied by an isolation valve that incorporates a stainless steel strainer. The spout outlet incorporates a plastic aerator. The product is also supplied with stainless steel braided PEX lined flexible hose assembly for connection to the solenoid valve with ¾” BSP (F) captive nut end connection. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2204330
Expiry date:
30/04/2027
Size:
15mm to ¾ BSP (M) compression isolation valve
Marking:
Cistermiser on body
Installation Requirements:
R001 R006 R007
Model:
NT-EX
Manufacturer:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate 59/69 Reading Road
Postcode
RG5 3AN
Country
Woodley
Phone
+44 118 969 1611 Fax: 0118 944 1426

View All Listings by this Company

Print This Approval


#2110031

Range of deck mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies (brushed stainless steel). The flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The spout outlet incorporates a plastic aerator. The products are supplied with plastic backnuts and a stainless steel braided PEX lined flexible hose assembly for installation between the tap and the solenoid valve. The HK-Rib model is supplied with a plastic flow regulator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2110031
Expiry date:
31/10/2026
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ½ captive nut end connection.
Marking:
Fastdry (trademark of Hokwang Industries Co., Ltd.) on spout.
Installation Requirements:
R001 R006 R007 R009
Model:
ECOTAP-D FA01, ECOTAP-D FA02, ECOTAP-D FA03, HK-Rib.
Manufacturer:
Hokwang Industries Co., Ltd.
Company Name
Hokwang Industries Co., Ltd.
Address
131 Dingping Rd., Ruifang District, New Taipei City, 22452
Country
Taiwan
Phone
+886-2-2496-6425

View All Listings by this Company

Print This Approval


#2110032

Range of wall mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies (brushed stainless steel). The flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The spout outlet incorporates a plastic aerator. The products are supplied with plastic backnuts and a stainless steel braided PEX lined flexible hose assembly for installation between the tap and the solenoid valve. The HK-Cha models added September are also supplied with a plastic flow regulator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2110032
Expiry date:
31/10/2026
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ½ captive nut end connection.
Marking:
Fastdry (trademark of Hokwang Industries Co., Ltd.) on spout
Installation Requirements:
R001 R007 R009 R040
Model:
ECOTAP-W FA01, ECOTAP-W FA02, InnoWash FA. Models added Sept 2022: HK-Cha, HK-Cha Shorter Ver..
Manufacturer:
Hokwang Industries Co., Ltd.
Company Name
Hokwang Industries Co., Ltd.
Address
131 Dingping Rd., Ruifang District, New Taipei City, 22452
Country
Taiwan
Phone
+886-2-2496-6425

View All Listings by this Company

Print This Approval


#2203321

Range of deck mounted, single hole, single outlet (fixed) electronically operated tap assemblies (Chromium plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The products are supplied with a tee piece for installation prior to the solenoid valve. The inlets of the tee piece incorporate a combined NBR gasket and stainless steel filter and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are also supplied with stainless steel braided PEX lined flexible (connecting) hose assemblies and angled spherical valves incorporating a stainless steel strainer for installation on each inlet. Temperature is controlled by adjusting the opening of each angled spherical valve. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2203321
Expiry date:
31/03/2027
Size:
½” BSP (M) (to isolation valves).
Marking:
Gessi logo on spout backplate
Installation Requirements:
R001 R006 R007 R010 R557
Model:
54081 ELECTRONIC BASIN MIXER (flessa decoration), 54181 ELECTRONIC BASIN MIXER (intreccio decoration), 54281 ELECTRONIC BASIN MIXER (meccanica decoration), 54381 ELECTRONIC BASIN MIXER (trame decoration), 54481 ELECTRONIC BASIN MIXER (cesello decoration).
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111

View All Listings by this Company

Print This Approval


#2205062

A range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Models A7552AA and A7553AA are supplied with an inline servicing valve integrated with a strainer and single check valve assemblies that has been verified by test for back flow prevention level 2. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2205062
Expiry date:
31/05/2027
Size:
A7551AA – ½” BSP A7552AA & A7553AA -Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection.
Marking:
Armitage Shanks on body
Installation Requirements:
R001 R009 R040
Model:
A7551AA Sensorflow Basin mixer wall mounted No Mix Battery. A7552AA Sensorflow Basin mixer panel mounted No Mix Battery. A7553AA Sensorflow Basin mixer panel mounted No Mix Mains.
Factor:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Country
Staffordshire,
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2205063

A range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a single lever operating member. The spout outlet incorporates a plastic aerator. These products are supplied with an inline servicing valve integrated with a strainer and single check valve assemblies that has been verified by test for back flow prevention level 2. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2205063
Expiry date:
31/05/2027
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection.
Marking:
Armitage Shanks on body
Installation Requirements:
R001 R009 R010 R040
Model:
A7554AA Sensorflow Basin mixer panel mounted Mix Battery. A7555AA Sensorflow Basin mixer panel mounted Mix Mains.
Factor:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Country
Staffordshire,
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2205064

A range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a single lever operating member. The spout outlet incorporates a plastic aerator. These products are supplied with an inline servicing valve integrated with a strainer and single check valve assemblies that has been verified by test for back flow prevention level 2. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2205064
Expiry date:
31/05/2027
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut with a check valve integrated strainer, servicing valve assembly with a 15mm compression inlet
Marking:
Armitage Shanks on body
Installation Requirements:
R001 R006 R009 R010
Model:
A7549AA Sensorflow BASIN EL SPT Rim-Mounted MIX MAINS. A7550AA Sensorflow BASIN EL SPT Rim-Mounted MIX BATTERY.
Factor:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Country
Staffordshire,
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2112063

Single-hole, single outlet, swivel electronically controlled tap assembly with a brass body in various finishes (see model). Flow is controlled by a solenoid valve activated via an infra-red sensor and a ceramic cartridge with a single lever operating member controlling both the flow and temperature. The spout outlet incorporates a pull-out spray with a plastic aerator. The inlets incorporate approved check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 2), and a stainless-steel strainer Maximum working pressure 5 bar. Maximum working temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2112063
Expiry date:
31/12/2026
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection attached to check valve bodies with 1/2" BSP female inlets
Marking:
Clearwater on tap body
Installation Requirements:
R001 R009 R090
Model:
AML10CP, AML10BN, AML10MB & AML10BB COMBINATION TAP ASSEMBLIES
Factor:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955

View All Listings by this Company

Print This Approval


#2205328

Range of deck mounted sensor taps. The flow is controlled via a solenoid valve and activated by an infra-red sensor on the front of the spout. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C (models 1070021 and 1070025). Maximum operating temperature 60°C (model 1070024).

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2205328
Expiry date:
31/05/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Frascio on body
Installation Requirements:
R001 R006 R009
Model:
1070021 1070024 1070025
Manufacturer:
Frascio (Guangdong) Co., Ltd
Company Name
Frascio (Guangdong) Co., Ltd
Address
288 JIN'OU ROAD #07-03 HUOJU MANSION JIANGHAI DIST JIANGMEN GUANGDONG 929040
Country
China

View All Listings by this Company

Print This Approval


#2205329

Wall mounted infra-red single hole, single outlet electronically controlled combination tap assemblies with brass body (chrome plated), incorporating a solenoid valve controlling the flow. The spout outlets incorporate a plastic aerator.Stainless steel strainer on inlet Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2205329
Expiry date:
31/05/2027
Size:
½” BSP (M)
Marking:
Frascio on body
Installation Requirements:
R001 R040
Model:
1070029
Manufacturer:
Frascio (Guangdong) Co., Ltd
Company Name
Frascio (Guangdong) Co., Ltd
Address
288 JIN'OU ROAD #07-03 HUOJU MANSION JIANGHAI DIST JIANGMEN GUANGDONG 929040
Country
China

View All Listings by this Company

Print This Approval


#2204039

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (various finishes, see models). Flow is controlled by a solenoid valve activated via an infra-red sensor. The products incorporate a hand dryer feature that are activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The products are supplied with a metal backnut. Maximum working pressure 8.0 bar. Cold water use only.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2204039
Expiry date:
30/04/2027
Size:
Stainless steel braided, PEX lined flexible hose assembly with ½" captive nut end connection
Marking:
AIKE on dryer unit (Model AK7120 only) AIKE on end of tap and AIKE on dryer unit (Models AK7130 & AK7131)
Installation Requirements:
R001 R006
Model:
AK7120 AIR TAP (Chrome) AK7130 AIR TAP (brushed steel) AK7131 AIR TAP (brushed steel)
Factor:
Zhejiang AIKE Appliances Co., Ltd.
Company Name
Zhejiang AIKE Appliances Co., Ltd.
Address
Yong'an Industry Zone Xianju City 317306 Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2204045

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlets incorporate plastic flow straightener, and the inlet incorporates a plastic filter. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2204045
Expiry date:
30/04/2027
Size:
½” BSP (M)
Marking:
Delabie on end of spout
Installation Requirements:
R001 R040 R570
Model:
443006, Tempomatic 3 443506, Tempomatic 4 443406, Tempomatic 4
Factor:
Delabie Ltd.
Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Country
Oxfordshire
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval


#2110122

Range of deck mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies (brushed stainless steel). The flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The spout outlet incorporates a plastic aerator. The products are supplied with plastic backnuts and a stainless steel braided PEX lined flexible hose assembly for installation between the tap and the solenoid valve. Supplied with a plastic flow regulator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2110122
Expiry date:
31/10/2026
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ½ captive nut end connection.
Marking:
+TSL on body
Installation Requirements:
R001 R006 R007 R009
Model:
TSL.R.020, TSL.R021.CS, TSL.R021C, TSL.R021.BLK, INFRA-TSL.R021.BR, TLS.R021.CP & TSL.R021.BZ INFA RED COMBINATION TAP ASSEMBLIES
Factor:
The Splash Lab
Company Name
The Splash Lab
Postcode
SK7 6DA
Phone
0161 482 7000
General Email
info@thesplashlab.com

View All Listings by this Company

Print This Approval


#2205350

Wall mounted infra-red single hole, single outlet electronically controlled combination tap assemblies with brass body (chrome plated), incorporating a solenoid valve controlling the flow. The spout outlets incorporate a plastic aerator.Stainless steel strainer on inlet Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2205350
Expiry date:
31/05/2027
Size:
½” BSP (M)
Marking:
Metlex (Brand of Croydex) on body
Installation Requirements:
R001 R040
Model:
TB 330141 electronically controlled combination tap assemblies
Factor:
Croydex DBA Metlex
Company Name
Croydex DBA Metlex
Address
Central Way Andover Hampshire
Postcode
SP10 5AW

View All Listings by this Company

Print This Approval


#2205351

Range of deck mounted sensor taps. The flow is controlled via a solenoid valve and activated by an infra-red sensor on the front of the spout. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2205351
Expiry date:
31/05/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Metlex (Brand of Croydex) on body
Installation Requirements:
R001 R006 R009
Model:
TB 330041MTE deck mounted sensor taps
Factor:
Croydex DBA Metlex
Company Name
Croydex DBA Metlex
Address
Central Way Andover Hampshire
Postcode
SP10 5AW

View All Listings by this Company

Print This Approval


#2112064

A range of single-hole, single outlet fixed or swivel electronically controlled tap assemblies with brass bodies in various finishes (see models). Flow is controlled by a solenoid valve activated via an infra-red sensor and a ceramic cartridge with a single lever operating members controlling both the flow and temperature for all models excluding 62816, which uses a mixer to control the temperature only with a single lever operating member. The spout outlets incorporate plastic aerators. All models (excluding AZL10range) incorporate a separate approved check valve cartridge on the inlet, verified by test (suitable for backflow protection against Fluid Category 2), The inlets of all models incorporate stainless steel strainers. Maximum working pressure 5.0 bar Maximum working temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2112064
Expiry date:
31/12/2026
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection (AZL10 models only) Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection a
Marking:
Sterling on body
Installation Requirements:
R001 R006 R009 R010
Model:
ESL10CP, AZL10CP, AZL10BN, AZL10MB & AZL10BB COMBINATION TAP ASSEMBLIES
Factor:
Clearwater Products Limited t/a Sterling
Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955

View All Listings by this Company

Print This Approval


#2206354

Range of wall mounted mirrored units incorporating an electronically controlled combination tap assemblies. Flow is controlled via solenoid valve which is actuated by an infra-red sensor. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2206354
Expiry date:
30/06/2027
Note:
R008 applies to the solenoid valve and its housing. This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation.
Size:
½” BSP (M).
Marking:
Dolphin Solutions Ltd. logo (letter D with integral dolphin silhouette) on underside of mounting bracket. Products with the Alavo behind mirror baseplate mounting option are marked Dolphinsolutions.co.uk on the underside of the base plate.
Installation Requirements:
R001 R007 R008 R040 R570
Model:
DS191.xx - Dolphin Alavo behind mirror inform (SMART) tap. Where xx denotes the size and shape of the mounting bracket and can be any combination of letters and/or numbers.
Manufacturer:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2205061

A range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. These products are supplied with an inline servicing valve integrated with a strainer and single check valve assemblies that has been verified by test for back flow prevention level 2. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2205061
Expiry date:
31/05/2027
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating 1/2" BSP captive nut end connection.
Marking:
Armitage Shanks on body
Installation Requirements:
R001 R006
Model:
A7547AA- Battery operated A7548AA- Mains operated
Factor:
Armitage Shanks
Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Country
Staffordshire,
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Print This Approval


#2206040

Range of single hole, single outlet (fixed) electronically controlled combination tap assembles with brass bodies (various finishes). Flow is controlled via a solenoid valve activated via an infra -red sensor. The temperature is controlled via a ceramic cartridge and a single lever operating member. The inlet adaptor incorporates a single check valve cartridge (verified by test, suitable for backflow protection against fluid category 2). The outlet incorporates a stainless-steel strainer and an aerator. Maximum working pressure 5.0 bar Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2206040
Expiry date:
30/06/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connection with additional ½” M to F adaptor.
Marking:
Lota on front base of tap body.
Installation Requirements:
R001 R006 R009 R010
Model:
63407-02X 63407-05X Where X denotes finish and can be replace with: 01 - Chrome, 6801 - Matt Black, X408 - Brushed Brass, 0402 - Brushed Nickel PVD, 5804 - Heirloom Silver, 08 - Stainless Steel, 04 - Brushed Nickel.
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Country
China
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2206041

Range of single hole, single outlet (fixed) electronically controlled combination tap assembles with brass bodies (various finishes). Flow is controlled via a solenoid valve activated via an infra -red sensor. The temperature is controlled via a ceramic cartridge and a single lever operating member. The spout outlet incorporates a pull-out spray with a plastic aerator. The trigger on the pull-out controls optional spray. The inlet adaptor incorporates a single check valve cartridge (verified by test, suitable for backflow protection against fluid category 2). The outlet incorporates a stainless-steel strainer and an aerator. Maximum working pressure 5.0 bar Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2206041
Expiry date:
30/06/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connection attached to check valve bodies with ½” BSP female inlets.
Marking:
Lota on front base of tap body.
Installation Requirements:
R001 R009 R090
Model:
63547-00X 63547-03X Where X denotes finish and can be replace with: 01 - Chrome, 6801 - Matt Black, X408 - Brushed Brass, 0402 - Brushed Nickel PVD, 5804 - Heirloom Silver, 08 - Stainless Steel, 04 - Brushed Nickel.
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Country
China
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2209009

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass finish). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator and a stainless-steel strainer on the inlet. Maximum working pressure 8.0 Bar Maximum operating temperature 70.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2209009
Expiry date:
30/09/2027
Size:
Stainless steel braided polyethylene lined flexible hose with 3/8" BSP captive nut end connections
Marking:
Stern logo on top of tap
Installation Requirements:
R001 R006 R009 R010
Model:
235100 – Smart B 235200 - Smart E 235110 – Smart LB 235210 – Smart LE 235150 – Smart Plus B 235250 – Smart Plus E
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2209031

Range of electronically controlled taps (chromium plated brass). The assemblies incorporate a touch sensitive device and are supplied with a solenoid valve to control the flow. Spout outlet incorporates a plastic aerator and the product is supplied with stainless steel strainers. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2209031
Expiry date:
30/09/2027
Size:
Stainless steel braided polyethylene lined flexible hose assembly incorporating ½” BSP captive nut.
Marking:
Stern on top of tap or on front of tap body
Installation Requirements:
R001 R006 R009
Model:
220100 Perfect Time B 220250 Perfect Time BR E
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2209054

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass finish). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator and a stainless-steel strainer on the inlet. Maximum working pressure 8.0 Bar Maximum operating temperature 70.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2209054
Expiry date:
30/09/2027
Size:
Stainless steel braided polyethylene lined flexible hose with 3/8" BSP captive nut end connections
Marking:
Dolphin on tap body
Installation Requirements:
R001 R006 R009 R010
Model:
DB200-aa-bb,DB225-aa-bb, DB200- SSL-aa-bb, DB225-SSL-aa-bb, DBL200-aa-bb & DBL225-aa-bb COMBINATION TAP ASSEMBLIES
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2206061

Range of single hole, single outlet (fixed) electronically controlled combination tap assembles with brass bodies (various finishes). Flow is controlled via a solenoid valve activated via an infra -red sensor. The temperature is controlled via a ceramic cartridge and a single lever operating member. The spout outlet incorporates a pull-out spray with a plastic aerator. The trigger on the pull-out controls optional spray. The inlet adaptor incorporates a single check valve cartridge (verified by test, suitable for backflow protection against fluid category 2). The outlet incorporates a stainless-steel strainer and an aerator. Maximum working pressure 5.0 bar Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2206061
Expiry date:
30/06/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connection attached to check valve bodies with ½” BSP female inlets.
Marking:
Kingfisher Good Home Logo on body
Installation Requirements:
R001 R009 R090
Model:
5059340452524
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2012109

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with a pull-out spray mechanism. Flow is controlled via a ceramic cartridge headwork with a single lever operating member incorporating an infra-red sensor on the swivel arm which operates a solenoid valve. The spout outlet incorporates a plastic aerator and a hand spray mechanism, and the product is supplied with metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2012109
Expiry date:
31/12/2025
Size:
Stainless steel braided PE-X lined flexible hose assemblies with 1/2" BSP captive nut.
Marking:
Kingfisher good home logo on tap body
Installation Requirements:
R001 R006 R009 R010
Model:
5059340452555 Kitchen Mixer Chrome
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2110135

Range of wall mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies (brushed stainless steel). The flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The spout outlet incorporates a plastic aerator. The products are supplied with plastic backnuts and a stainless steel braided PEX lined flexible hose assembly for installation between the tap and the solenoid valve. The HK-Cha models added September are also supplied with a plastic flow regulator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2110135
Expiry date:
31/10/2026
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ½ captive nut end connection.
Marking:
+TSL on spout
Installation Requirements:
R001 R007 R009 R040
Model:
TSL.C051, TSL.C051.C, TSL.C051.CS, TSL.C051.CP, TSL.C051.BK, TSL.C051.BR, TSL.C051.BZ, TSL.C052, TSL.C052.C, TSL.C052.CS, TSL.C052.CS, TSL.C052.CP, TSL.C052.BK, TSL.C052.BR & TSL.C052.BZ INFRA-RED COMBINATION TAP ASSEMBLIES
Factor:
The Splash Lab UK
Company Name
The Splash Lab UK
Address
Unit 34 Meadow Industrial Estate Stockport
Postcode
SK1 2BU
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2210011

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. Models are either cold/premixed water only or hot and cold supply with a manually adjustable temperature lever. The product incorporates stainless steel strainers and the inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2210011
Expiry date:
31/10/2027
Size:
Stainless-steel braided PEX lined flexible hose assemblies with 3/8" BSP (F) captive nut end connections.
Marking:
Stern logo on end of tap body
Installation Requirements:
R001 R006 R009 R010
Model:
225901 Green AB1953 – Cold or premixed water 225951 Green B AB1953 – Cold or premixed water 225941 Green E AB1953 – Cold or premixed water 225801 Green 1000 AB1953 – Hot and cold water 225871 Green 1000B AB1953 – Hot and cold water 225821 Green 1000E AB1953 – Hot and cold water
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2210016

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator and the inlets incorporates stainless steel strainers. Models 351500 & 351510 incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models are either cold/premixed water only or hot and cold supply with a manually adjustable temperature lever. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2210016
Expiry date:
31/10/2027
Size:
Stainless steel braided flexible hose assemblies incorporating polyethylene liners and 3/8" BSP (F) captive nuts
Marking:
Stern of front base of tap body.
Installation Requirements:
R001 R006 R009 R010
Model:
351020 QUADRAT DM B 351010 QUADRAT DM E 351500 QUADRAT 1000 DMB 351510 QUADRAT 1000 DME
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2210017

‘Tubular’ range of wall mounted spout outlets (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The box assembly incorporates a solenoid valve, screwdriver operated spherical valve and the spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2210017
Expiry date:
31/10/2027
Size:
½” BSP (M)
Marking:
Stern on front face of spout.
Installation Requirements:
R001 R040
Model:
Tubular 2030B (model code 350300). Tubular 2030E (model code 350400). Tubular 2030 LB (model code 350310). Tubular 2030 LE (model code 350410).
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2210026

A range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a dome operating member. The spout outlet incorporates a plastic aerator. The inlets incorporate stainless steel strainers and single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 5.0 Bar Maximum operating temperature 65 °C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2210026
Expiry date:
31/10/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies with 3/8" BSP captive nut end connections.
Marking:
Stern base of tap
Installation Requirements:
R001 R006 R009 R010
Model:
236930 Trendy TB 236935 Trendy TE
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2210028

A range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assembly with chromium plated brass bodies. The flow is controlled by a solenoid valve activated via an infra-red sensor and a manually adjustable temperature lever. The inlet to the solenoid incorporates a stainless-steel strainer. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2210028
Expiry date:
31/10/2027
Size:
Stainless steel braided polyethylene lined flexible hose assembly incorporating ½” BSP male which connects to a solenoid with a 10mm spigot end connection.
Marking:
Stern on spout
Installation Requirements:
R001 R009 R010 R040
Model:
350805 tubular 1000B AB1953 350855 tubular 1000E AB1953 350815 tubular 1000LB AB1953 350865 tubular 1000LE AB1953
Manufacturer:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2211011

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer and check valve cartridge(s), verified by test (suitable for backflow protection against Fluid Category 2). The product incorporates a stainless steel braided PEX lined flexible connection hose, connecting the spout to the solenoid. The spout outlet incorporates a plastic aerator. Maximum working pressure - 10 Bar Maximum operating temperature - 60 °C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2211011
Expiry date:
30/11/2027
Note:
R008 applies to the sensor control boxes. R007 only applies to models with connecting hoses (44521660 Meta, 44521670 IMO, 44521782 MEM, 44521809 Vaia).
Size:
Stainless steel braided PEX lined flexible hose assembly, incorporating a ½” BSP (F) captive nut end connections. Models added December 2023: Stainless steel braided, PEX lined flexible hose assembly with 3/8" BSP (F) captive nut end connectors.
Marking:
Dornbracht logo on body
Installation Requirements:
R001 R006 R007 R008 R009
Model:
44521660 Meta 44521670 IMO 44521782 MEM 44521809 Vaia Meta and Vaia – round spout / IMO and MEM - rectangular spout Models added December 2023: 44521831 YAMOU, 44521832 YARRE.
Factor:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 D-58640 Iserlohn
Postcode
Germany

View All Listings by this Company

Print This Approval


#2211028

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 1.0 bar. Maximum operating temperature 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2211028
Expiry date:
30/11/2027
Size:
½” BSP (M)
Marking:
INTA on top of tap. Model on rear of body.
Installation Requirements:
R001 R006 R008 R570
Model:
IR500CP – Infrared basin tap battery operated IR501CP - Infrared basin tap mains operated
Factor:
Intatec Ltd
Company Name
Intatec Ltd
Address
Airfield Industrial Estate, Hixon, Staffs.
Postcode
ST18 0PF
Country
United Kingdom
Phone
+44 1889 272 199

View All Listings by this Company
Manufacturer:
Idral
Company Name
Idral
Address
Casella Postale 77, Ufficio Postal di Gozzano (No), 28024 (No)

View All Listings by this Company

Print This Approval


#2206324

Range of single hole, single outlet (swivel) electronically controlled tap assemblies. The flow and temperature is controlled by a ceramic cartridge headworks with single lever operating members. The flow is also controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The hose inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2206324
Expiry date:
30/06/2027
Size:
Stainless steel braided PEX lined flexible hoses with 3/8” BSP (F) captive nut end connections.
Marking:
Schell and company logo on body.
Installation Requirements:
R001 R006 R009 R010
Model:
002420699 002430699 002440699
Manufacturer:
Schell GmbH & Co KG Armaturentechnologie
Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 D-57462 Olpe
Country
Germany

View All Listings by this Company

Print This Approval


#2212004

Range of deck mounted taps for cold or premixed water with stainless steel bodies. Flow is controlled by a solenoid valve activated via an infra-red sensor, and the spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connection hose. Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212004
Expiry date:
31/12/2027
Size:
Solenoid with 10mm spigot.
Marking:
Stern on top of tap body.
Installation Requirements:
R001 R006 R007
Model:
239003 – Trendy B AISI316, 239103 – Trendy E AISI316, 239404 – Trendy LB AISI316, 239403 – Trendy LE AISI316, 235104 – Smart B AISI316, 235204 – Smart E AISI316, 235113 – Smart LB AISI316, 235213 – Smart LE AISI316.
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2212008

Range of wall mounted, single hole, single outlet (fixed) tap assemblies (chromium plated brass) with a solenoid valve controlling the flow and activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connecting hose. Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212008
Expiry date:
31/12/2027
Size:
½” BSP (M).
Marking:
Stern on spout body.
Installation Requirements:
R001 R007 R040
Model:
351110 - Quadrat B AB 1953, 351210 - Quadrat E AB 1953, 351115 - Quadrat LB AB 1953, 351215 - Quadrat LE AB 1953.
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2212021

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor and the temperature is controlled via a ceramic disc headwork with a dome type operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a single check valve assembly (verified by test suitable for backflow protection against Fluid Category 2) and the inlet incorporates a stainless-steel strainer. Maximum working pressure 10 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212021
Expiry date:
31/12/2027
Size:
Stainless-steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP (F) captive nut end connections.
Marking:
DORNBRACHT on body
Installation Requirements:
R001 R006 R009 R010
Model:
44511660 44515660 44511670 44515670
Factor:
Dornbracht AG & Co. KG
Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 D-58640 Iserlohn
Postcode
Germany

View All Listings by this Company

Print This Approval


#2212022

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The main body incorporates a stainless-steel strainer prior to the solenoid. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212022
Expiry date:
31/12/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies with 3/8” BSP captive nut end connections.
Marking:
Stern on operating member.
Installation Requirements:
R001 R006 R009
Model:
237250 Extreme Plus B, 237300 Extreme E, 237200 Extreme B, 237350 Extreme Plus E.
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2212024

Range of deck mounted taps for cold or premixed water (chromium plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet hoses have stainless steel strainers and incorporate approved check valve cartridges, however, the complete products have not been fully tested to demonstrate they provide backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212024
Expiry date:
31/12/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies with 3/8” BSP captive nut end connections.
Marking:
STERN on body.
Installation Requirements:
R001 R006 R009
Model:
239050 – Trendy Plus B, 239160 – Trendy Plus LE, 239051 – Trendy Plus B AB1953, 239161 – Trendy Plus LE AB1953.
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2212034

Range of wall mounted tap assemblies for cold or premixed water with chromium plated brass bodies. Flow is controlled by a solenoid valve activated via an infra-red sensor and the spout outlets have plastic aerators. Supplied with stainless steel braided PEX lined connection hoses. Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212034
Expiry date:
31/12/2027
Size:
10mm spigot.
Marking:
Stern logo on sensor plate.
Installation Requirements:
R001 R007 R040
Model:
340300 – Extreme WMB, 340200 – Extreme WME, 340400 – Extreme WM LB, 340500 – Extreme WM LE.
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2212038

Range of single hole, single outlet, electronically controlled tap assemblies (chrome plated brass body). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connection hose and a manual lever for controlling the temperature. Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212038
Expiry date:
31/12/2027
Size:
½” BSP male
Marking:
Stern on top of body.
Installation Requirements:
R001 R006 R009 R010
Model:
239200 - Trendy 1000B, 239300 - Trendy 1000E, 239600 - Trendy 1000LB, 239700 - Trendy 1000LE, 239201 - Trendy 1000B AB1953, 239301 - Trendy 1000E AB1953, 239601 - Trendy 1000LB AB1953, 239701 - Trendy 1000LE AB1953.
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2212069

Range of deck mounted single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel for models 236303 & 236404 only or chromium plated brass for all others). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. The inlets incorporate stainless steel strainers and the products are supplied with stainless steel braided PEX line connection hoses. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212069
Expiry date:
31/12/2027
Size:
10mm Spigot
Marking:
STERN on top of body.
Installation Requirements:
R001 R006 R009
Model:
235130 Smart XLB, 235220 Smart XLE, 236300 Elite B, 236400 Elite E, 236500 Elite LB, 236600 Elite LE, 236303 Elite B AISI316, 236404 Elite E AISI316.
Factor:
Y Stern Engineering (1989) Ltd
Company Name
Y Stern Engineering (1989) Ltd
Address
15 Gan Rave Blud 8122217 Yavne Israel

View All Listings by this Company

Print This Approval


#2212077

Range of single hole, single outlet, electronically controlled tap assemblies (chrome plated brass body). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connection hose. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212077
Expiry date:
31/12/2027
Size:
10mm spigot.
Marking:
Stern on tap body.
Installation Requirements:
R001 R006 R007
Model:
350700, 350750, 350700-DP, 350750-DP.
Manufacturer:
Y Stern Engineering (1989) Ltd
Company Name
Y Stern Engineering (1989) Ltd
Address
15 Gan Rave Blud 8122217 Yavne Israel

View All Listings by this Company

Print This Approval


#2210065

A range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assembly with chromium plated brass bodies. The flow is controlled by a solenoid valve activated via an infra-red sensor and a manually adjustable temperature lever. The inlet to the solenoid incorporates a stainless-steel strainer. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2210065
Expiry date:
31/10/2027
Size:
Stainless steel braided polyethylene lined flexible hose assembly incorporating ½” BSP male which connects to a solenoid with a 10mm spigot end connection.
Marking:
Dolphin on body
Installation Requirements:
R001 R009 R010 R040
Model:
Dolphin Blue DB450 Dolphin Blue DB475 Dolphin Blue DBL450 Dolphin Blue DBL475
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2301014

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass bodies). Flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled via a manual operating single lever on body. The inlets hose incorporates stainless steel strainer and an approved check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection). The spout outlet incorporates a plastic aerator and the product is supplied with metal backnuts. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2301014
Expiry date:
31/01/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies with 3/8" BSP captive nut end connections.
Marking:
Stern on top of tap body
Installation Requirements:
R001 R009 R006 R010
Model:
239250 – Trendy 1000 Plus B 239350 - Trendy 1000 Plus E 239260 - Trendy 1000 Plus LB 239360 - Trendy 1000 Plus LE 239251 - Trendy 1000 Plus B AB 1953 239351 - Trendy 1000 Plus E AB 1953 239261 - Trendy 1000 Plus LB AB 1953 239361 - Trendy 1000 Plus LE AB 1953
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2301312

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated). Flow is controlled by a solenoid valve activated via an infra-red sensor. The product incorporates a manual temperature control operated by a single lever on the side of the body. Spout outlet incorporates plastic aerator. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2301312
Expiry date:
31/01/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
Grohe on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
36.327.001, 36.325.001, 36.330.001.
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2301314

Range of single hole, single outlet, fixed, electronically controlled tap assemblies with brass bodies (chrome plated), The flow is controlled by a solenoid valve activated via an infra-red sensor. The product incorporates a manual temperature control operated by a single lever on the side of the body. Spout outlets incorporate plastic aerators. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2301314
Expiry date:
31/01/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
Grohe on top of body.
Installation Requirements:
R001 R006 R009 R010
Model:
36.421 (mains), 36.422 (battery).
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2301336

Range of deck mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies (chrome plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. There is no temperature control or operating member for these products. The spout outlet incorporates a plastic aerator. The products supplied with a plastic flow regulator. Maximum working pressure 6.0 bar.

Non-metallic materials and components comply with BS6920 at 40°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2301336
Expiry date:
31/01/2028
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Cistermiser on body.
Installation Requirements:
R001 R006 R009
Model:
VST.
Factor:
Cistermiser
Company Name
Cistermiser
Address
Unit 1, Woodley Park Estate 59-69 Reading Road Woodley
Postcode
RG5 3AN
Country
Reading
Phone
0118 921 5451

View All Listings by this Company

Print This Approval


#2301337

Wall mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies (brushed stainless steel). The flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. There is no temperature control or operating member for these products. The spout outlet incorporates a plastic aerator. The products supplied with a plastic flow regulator. Maximum working pressure 6.0 bar.

Non-metallic materials and components comply with BS6920 at 40°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2301337
Expiry date:
31/01/2028
Size:
½” BSP (M).
Marking:
Cistermiser on body.
Installation Requirements:
R001 R009 R040
Model:
VSS.
Factor:
Cistermiser
Company Name
Cistermiser
Address
Unit 1, Woodley Park Estate 59-69 Reading Road Woodley
Postcode
RG5 3AN
Country
Reading
Phone
0118 921 5451

View All Listings by this Company

Print This Approval


#2301331

Range of wall mounted single-hole, single outlet, fixed electronically controlled combination tap assemblies (chrome plated brass), incorporating a solenoid valve controlling the flow that is activated via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 10 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2301331
Expiry date:
31/01/2028
Size:
½” BSP (M).
Marking:
Schell logo and SCHELL on body.
Installation Requirements:
R001 R010 R040
Model:
01 953 06 99, 01 954 06 99.
Manufacturer:
Schell GmbH & Co KG Armaturentechnologie
Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 D-57462 Olpe
Country
Germany

View All Listings by this Company

Print This Approval


#2303350

Single hole, single outlet (fixed) electronically controlled combination tap assemblies (chromium plated). The flow is controlled by a solenoid valve activated via an infra-red sensor. Spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2303350
Expiry date:
31/03/2028
Size:
Polyamide (PA) braided PEX lined flexible hose with brass 3/8” BSP captive nut end connector.
Marking:
Grohe on body.
Installation Requirements:
R001 R006 R009
Model:
36.439.
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2212029

Range of single hole, single outlet (fixed) electronically controlled combination tap assemblies (various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor and the temperature set via a manual lever. The inlet adaptor to the hoses incorporates a check valve cartridge verified by test (suitable for backflow protection against Fluid Category 2 or 3) with a built-in strainer, and the outlet incorporates an aerator. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212029
Expiry date:
31/12/2027
Size:
Stainless steel braided, PEX lined flexible hoses with 3/8" BSP captive nuts with a 3/8" BSP (M) x 3/8" BSP (F) adaptor
Marking:
Hansgrohe on front base of body
Installation Requirements:
R001 R006
Model:
15 170 XXX 15 172 XXX
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval


#2212093

Range of single hole, single outlet, electronically controlled tap assemblies (chrome plated brass body). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connection hose and a manual lever for controlling the temperature. Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212093
Expiry date:
31/12/2027
Size:
½” BSP male
Marking:
+TSL on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
L981, L982, L983 & L984
Factor:
The Splash Lab UK
Company Name
The Splash Lab UK
Address
Unit 34 Meadow Industrial Estate Stockport
Postcode
SK1 2BU
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2304069

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated – brass bodies). Flow is controlled via a solenoid which is actuated via an infrared sensor and the temperature is controlled by a manual lever. The spout outlets incorporate plastic aerators. The inlet hoses incorporate stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2304069
Expiry date:
30/04/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
Axor on body
Installation Requirements:
R001 R006 R009 R010
Model:
10 145 000 Axor Stark electronic basin mixer with temp pre adjustment with 230 V mains connection. 10 101 000 Axor Stark electronic basin mixer with temp control battery operated. 10 106 000 Axor Stark Electronic basin mixer with temp pre-adjustment battery-operated. 10 140 000 Axor Stark Electronic basin mixer with temp control with 230 V Mains connection. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach
Country
Germany

View All Listings by this Company

Print This Approval


#2303340

Range of single hole, single outlet, electronically controlled tap assemblies (brass body – various finishes). The flow is controlled via a solenoid valve and activated by an infra-red sensor on the front of the spout. The spout outlet incorporates a plastic aerator. Models xxx.yyy.170E/W are supplied with a click clack waste. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2303340
Expiry date:
31/03/2028
Size:
Stainless steel braided, EPDM lined hose assembly with ½” BSP (F) end connections.
Marking:
THG on rear of body
Installation Requirements:
R001 R006 R008
Model:
xxx.yyy.170IRB/W Electronic tap for washbasin with infra-red presence detection, without pop-up waste (supplied with 6 v battery). xxx.yyy.170IRS/W Electronic tap for washbasin with infra-red presence detection, without pop-up waste (mains powered) . xxx.yyy.170E/W Electronic tap with capacitive electronic detection, with waste (supplied with 6x1.5v batteries) xxx indicates series & yyy indicates finish. Series (xxx) xxx.yyy.170E/W G4P collection o - U7G icon x - U7H icon à manettes - U7J Icon x insert metal - U7K icon x à manettes, insert metal - U7L icon x titane - U7M icon x à manette, titane - U7S icon x carbone or - U7T icon x à manettes, carbone or xxx.yyy.170IRS/W – xxx.yyy.170IRB/W A2N mossi cristal clair - A33 bambou cristal noir - A34 bambou cristal ambre - A35 bambou cristal clair - A7A ithaque décor or - G1T beluga - G29 charleston - G5E soho - G6A metamorphose - G79 cubica - G7A beaubourg - G7C saint germain - G7E dean - G8A les ondes - G9A system métal lisse - G9C system métal diamant - G9E system métal quadrille - G9G system howlite - G9J system cristal U93 malmaison metal - U9A west coast croisillon metal - U9K grand central croisillon metal - A54 art déco - A55 art déco à manettes - A56 art déco cristal - A57 tradition – A58 tradition à manettes – A59 tradition cristal – G3R Montaigne marbre grand antique - G3S Montaigne marbre grand antique à manettes - G3T Montaigne marbre Leonardo grey - G3U Montaigne à manettes Leonardo grey - G3V Montaigne marbre blanc vénus - G3W Montaigne marbre blanc à manettes vénus - U2A le 11 by alberto pinto - U2B le 11 by alberto pinto à manettes Finishes: A01 Poli A02 Chromé B01 Nickel brillant C01 Nickel mat C02 Chromé mat C03 Chromé satiné C05 Nickel satiné C47 Nickel fumé D01 Bronze clair D05 Bronze clair mat D13 Carbon D24 Aranja F01 Doré brillant F03 Doré satiné F07 Doré mat non vernis F18 Argent rhodié F19 Argent mat rhodié F27 Or rose F30 Or pâle F31 Or pâle MAT F32 Or pâle satiné F33 PVD couleur bronze brown F34 PVD couleur bronze brown mat H03 Veil argent brillant H06 Cuivre rouge mat H07 Vieux cuivre rouge mat H17 Aranja mat H21 cuivre rouge non verni H24 Vieux cuivre rouge brillant H27 Bronze satiné H28 Vieux nickel H30 Veil argent mat non verni H49 PVD couleur laiton H50 PVD couleur laiton mat H52 PVD couleur doré H53 PVD couleur doré mat H55 PVD couleur nickel H56 PVD couleur nickel mat H60 PVD couleur blush mat H62 PVD couleur blush H64 PVD couleur graphite H65 PVD couleur graphite mat H66 PVD couleur umber H67 PVD couleur umber mat
Manufacturer:
THG
Company Name
THG
Address
35, rue Tournière - BP 80212 Béthencourt sur Mer 80535 Friville cedex
Country
France
Phone
+33 3.22.60.20.80

View All Listings by this Company

Print This Approval


#2206067

Range of single hole, single outlet (fixed) electronically controlled combination tap assembles with brass bodies (various finishes). Flow is controlled via a solenoid valve activated via an infra -red sensor. The temperature is controlled via a ceramic cartridge and a single lever operating member. The inlet adaptor incorporates a single check valve cartridge (verified by test, suitable for backflow protection against fluid category 2). The outlet incorporates a stainless-steel strainer and an aerator. Maximum working pressure 5.0 bar Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2206067
Expiry date:
30/06/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connection with additional ½” M to F adaptor.
Marking:
Kingfisher Good Home Logo & date of manufacture MM/YY on tap body.
Installation Requirements:
R001 R006 R009 R010
Model:
5059340452531 & 5059340452548
Factor:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square, Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#2303051

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor and a manual lever to control the outlet temperature. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar. Temperature:60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2303051
Expiry date:
31/03/2028
Size:
10mm copper tails or stainless steel braided PEX lined flexible hose assemblies with 3/8” captive nut end connections. Supplied with a servicing valve for all inlet connections.
Marking:
Delabie on body.
Installation Requirements:
R001 R006 R009 R010
Model:
490006 - Tempomatic mix 4 (SS Braided), 49000615 - Tempomatic mix 4 (Copper Tail), 49000115 - Tempomatic mix 4 (Copper Tail), 49200615 - Tempomatic 3 mix electronic basin mixers (SS Braided). 440006 - Tempomatic 4 (SS Braided), 44000615 - Tempomatic 4 (Copper Tail), 44000115 - Tempomatic 4 (Copper Tail), 440001HK - Tempomatic 4 (SS Braided), 44200615 - Tempomatic 3 electronic basin mixers (SS Braided). Tempomatic mix are dual feed, tempomatic are single feed.
Manufacturer:
Delabie Ltd.
Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Country
Oxfordshire
Phone
+44 1491 824 449

View All Listings by this Company

Print This Approval


#2304020

Range of wall mounted, single-hole, single outlet (fixed) electronically controlled combination tap assemblies (chrome plated brass bodies). Flow is controlled via a solenoid, activated via an infra-red sensor. The outlets incorporate plastic aerators. Maximum working pressure 8.0 bar Maximum operating temperature 70°C

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2304020
Expiry date:
30/04/2028
Size:
15 mm Spigot
Marking:
STERN logo on wall plate
Installation Requirements:
R001 R010 R040
Model:
237801 – Extreme CS B 237800 – Extreme CS E 237801-316 – Extreme CS B AISI316 237800-316 – Extreme CS E AISI316 237802 – Extreme CS DPB 237803 – Extreme CS DPE 237802-316 – Extreme CS DPB AISI316 237803-316 – Extreme CS DPE AISI316
Manufacturer:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2305303

Range of wall mounted, electronically operated, combination tap assemblies (stainless steel body, various finishes - see model), comprising of a Premix control unit and a spout. The flow is controlled by a solenoid valve, (Premix control unit), which is actuated via an infrared sensor. The central section of the valve incorporates a plastic strainer. Both inlets of the Premix control unit incorporate an approved single check valve cartridge, however the complete assembly has not been tested for backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2305303
Expiry date:
31/05/2028
Note:
This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation. R008 applies to the Premix control unit. The product is not supplied with any connecting hoses/pipework between the Premix control unit and the spout.
Size:
½” BSP (M) (to hot and cold inlets of solenoid).
Marking:
QTOO (brand of D Line) on spout trim.
Installation Requirements:
R001 R008 R010 R040 R570
Model:
QST3190xxx (190mm spout), QST3290xxx (250mm spout). Where xxx denotes the surface finish (which is a non-water contact part). It can be 1 to 3 digits, which can be any combination of numbers and/or letters. As examples: M = brushed stainless steel finish, PP1 = polished PVD gunmetal finish.
Factor:
D Line
Company Name
D Line
Address
Roskildevej 22 2620 Albertslund
Country
Denmark
Phone
+4572170138
General Email
service@dline.com

View All Listings by this Company

Print This Approval


#2305324

Range of wall mounted, electronically operated combination tap assembly (chrome plated brass body). The flow is controlled by a solenoid valve which is actuated via an infrared sensor. The spout outlets incorporate a plastic aerator. The solenoid valve inlet incorporates a plastic and stainless steel filter. The products are supplied with a triple layered connecting hose (PVC inner and outer layer and nylon braided middle layer). Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2305324
Expiry date:
31/05/2028
Note:
R008 applies to the solenoid and solenoid housing.
Size:
½” BSP (M)
Marking:
DTC28 & DEVA on body
Installation Requirements:
R001 R007 R008 R010
Model:
SENSOR9/W
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2305325

Electronically operated combination tap assembly, (chrome plated brass body). The flow is controlled by a solenoid valve which is actuated via an infrared sensor on the spout. The spout outlet incorporates a plastic aerator. The product is supplied with a stainless steel braided (EPDM or PEX lined) flexible connecting hose. Maximum working pressure 8.0 bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2305325
Expiry date:
31/05/2028
Note:
R008 applies to the solenoid and solenoid housing.
Size:
½” BSP (M)
Marking:
DTC28 & DEVA on body
Installation Requirements:
R001 R006 R007 R008 R010
Model:
SENSOR4/D
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2304087

Range of wall mounted, single-hole, single outlet (fixed) electronically controlled combination tap assemblies (chrome plated brass bodies). Flow is controlled via a solenoid, activated via an infra-red sensor. The outlets incorporate plastic aerators. Maximum working pressure 8.0 bar Maximum operating temperature 70°C

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2304087
Expiry date:
30/04/2028
Size:
15 mm Spigot
Marking:
Duten on wall plate
Installation Requirements:
R001 R010 R040
Model:
R335-S/B/N_BAT, R335-S/B/N_SEC, R335-TR-S/B/N_BAT & R335-TR-S/B/N_SEC
Factor:
Duten
Company Name
Duten
Postcode
France

View All Listings by this Company

Print This Approval


#2212101

Range of single hole, single outlet, electronically controlled tap assemblies (chrome plated brass body). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connection hose. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212101
Expiry date:
31/12/2027
Size:
10mm spigot.
Marking:
Dudley Logo on tap body.
Installation Requirements:
R001 R006 R007
Model:
Linear Battery Linear Mains
Factor:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000
General Email
sales@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2307301

Range of wall mounted, concealed, electronically controlled combination tap asselmblies (various finishes). The flow is controlled by a solenoid valve that is activated via an infra-red sensor which can be single or dual feed and incorporates lever operated isolation valves with stainless steel strainers. The spout outlet incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2307301
Expiry date:
31/07/2028
Note:
Models must be installed with either of these concealed installation boxes. 36.336.001 or 36.337.001
Size:
Stainless steel braided silicon lined flexible hose assemblies with 3/8” BSP captive nut.
Marking:
Grohe on face plate
Installation Requirements:
R001 R009 R010 R040
Model:
36.273.000 36.334.SD0 36.335.SD0
Factor:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Country
Germany
Phone
02372 930
General Email
info@grohe.com

View All Listings by this Company

Print This Approval


#2309045

Range of single hole, single outlet, electronic touch free, deck mounted taps (chromium plated brass) for cold or premixed water. Flow is controlled via solenoid valves, actuated by infra-red sensors. Power is supplied by externally mounted 9V battery pack or 9V transformer. The inlet hoses have a stainless-steel strainer and the spout outlets incorporate plastic aerators. Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2309045
Expiry date:
30/09/2028
Size:
Stainless steel braided, PEX lined hose with 3/8” BSP captive nut.
Marking:
Stern on operating member.
Installation Requirements:
R001 R006 R009
Model:
231000 Sensor B Standart 231100 Sensor E Standart 231530 Sensor LB Standart (extended spout) 231520 Sensor LE Standart (extended spout).
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2309056

Range of wall mounted, single-hole, single outlet (fixed) electronically controlled combination tap assemblies (chrome plated brass or stainless-steel bodies) which are supplied with pre-mixed water. Flow is controlled via an infra-red activated solenoid valve and the spout outlets incorporate plastic aerators. Maximum working pressure 8.0 bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2309056
Expiry date:
30/09/2028
Size:
10mm spigot connection
Marking:
Stern on body
Installation Requirements:
R001 R040
Model:
350207 Tubular Perth B 350107 Tubular Perth E 350209 Tubular DPB 350103 Tubular DPE 350214 Tubular DP LB 350123 Tubular DP LE 350224 Tubular XL DPB 350223 Tubular XL DPE 350218 Tubular DPB AISI316 350128 Tubular DPE AISI316 350217 Tubular DP LB AISI316 350126 Tubular DP LE AISI316
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2309057

Range of single hole, single outlet, fixed, electronically controlled tap assemblies (chrome plated brass bodies). Flow is controlled via an infra-red activated solenoid valve and the spout outlets incorporate plastic aerators. The inlets incorporate a stainless-steel filter washer. Maximum working pressure 8.0 bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2309057
Expiry date:
30/09/2028
Size:
Stainless steel braided, PEX lined hose with 3/8” BSP captive nut
Marking:
Stern on body
Installation Requirements:
R001 R006 R009
Model:
236300 Elite B 236400 Elite E 236500 Elite LB 236600 Elite LE 236350 Elite Plus B 236450 Elite Plus E 236360 Elite Plus LB 236460 Elite Plus LE
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2309309

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (various finishes - see model). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The TK-201LT66 and TK-201LT95 models have a multi-layer PEX lined hose between the solenoid and the spout. The TK-201LT65 models have a stainless steel braided PEX lined flexible hose between the solenoid and the spout. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2309309
Expiry date:
30/09/2028
Note:
R008 applies to the solenoid
Size:
½” BSP (M)
Marking:
TCK (trade-mark of Xiamen OLT Co., Ltd) on body
Installation Requirements:
R001 R006 R007 R008
Model:
TK-201LT66 (Stainless steel body/finish), TK-201LT65-BZ, TK-201LT65-BN, TK-201LT65-CP, TK-201LT95 (Chome plated). Where: BZ: Bronze, BN: Brushed Nickel, CP: Chrome plated.
Manufacturer:
Xiamen OLT Co., Ltd.
Company Name
Xiamen OLT Co., Ltd.
Address
No.950, Tonglong 2nd Road, Xiamen Torch High-tech Zone (Xiang'an) Industrial Zone, Xiamen City
Country
China

View All Listings by this Company

Print This Approval


#2309368

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (various finishes - see model). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The IRBS5-CP models have a multi-layer PEX lined hose between the solenoid and the spout. The TK-201LT65 models have a stainless steel braided PEX lined flexible hose between the solenoid and the spout. The spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2309368
Expiry date:
30/09/2028
Note:
R008 applies to the solenoid
Size:
½” BSP (M)
Marking:
Bristan on body
Installation Requirements:
R001 R006 R007 R008
Model:
IRBS3-CP IRBS5-CP
Factor:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

Print This Approval


#2309073

Range of single hole, single outlet, fixed, electronically controlled tap assemblies (chrome plated brass bodies). Flow is controlled via an infra-red activated solenoid valve and the spout outlets incorporate plastic aerators. The inlets incorporate a stainless-steel filter washer. Maximum working pressure 8.0 bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2309073
Expiry date:
30/09/2028
Size:
Stainless steel braided, PEX lined hose with 3/8” BSP captive nut
Marking:
Dudley on body
Installation Requirements:
R001 R006 R009
Model:
Contemporary Battery with extended spout, Contemporary Mains Deck Mounted with Stainless Steel effect finish, Contemporary Mains Deck Mounted with Matt Black effect finish, Contemporary Mains Deck Mounted with Matt Black effect finish, 2.5LPM regulated Contemporary Mains, Contemporary Mains with extended height and spout Contemporary Battery
Factor:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000
General Email
sales@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2310033

Range of single-hole, single outlet, (fixed), electronically controlled tap assemblies (chrome plated brass or stainless steel bodies). Flow is controlled via solenoid valve activated via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2310033
Expiry date:
31/10/2028
Size:
Stainless-steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Stern logo on body
Installation Requirements:
R001 R006 R009
Model:
230000 230010 230020 230030
Factor:
Y Stern Engineering (1989) Ltd
Company Name
Y Stern Engineering (1989) Ltd
Address
15 Gan Rave Blud 8122217 Yavne Israel

View All Listings by this Company

Print This Approval


#2310034

Range of wall mounted, electronically controlled combination tap assemblies, (chrome plated brass or stainless steel bodies). The flow is controlled by a solenoid valve that is activated via an infra-red sensor The spout outlet incorporates a plastic aerator. The product incorporates a stainless steel braided PEX lined flexible connection hose assembly, connecting the spout to the solenoid valve. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2310034
Expiry date:
31/10/2028
Size:
1/2" BSP (M) X 10mm spigot solenoid valve
Marking:
Stern on body.
Installation Requirements:
R001 R009 R040
Model:
352000 D28 352100 D28E 352010 D28 LB 352110 D28 LE 352130 D28 AISI316 352120 D28E AISI316 352015 D28 LB AISI316 352125 D28 LE AISI316
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2310035

Range of electronically operated combination tap assemblies, (chrome plated brass bodies). The flow is controlled by a solenoid valve which is actuated via an infrared sensor. The spout outlet incorporates a plastic aerator. The product incorporates a stainless steel braided PEX lined flexible connection hose, connecting the tap to the solenoid valve. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2310035
Expiry date:
31/10/2028
Size:
½” BSP (M) x 10mm spigot.
Marking:
Stern on tap body
Installation Requirements:
R001 R006 R009
Model:
260100 Compact B 260200 Compact E 260300 Compact Basic
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2310092

Range of wall mounted, single-hole, single outlet, electronically controlled combination tap assemblies, (chrome plated brass or stainless steel bodies). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The products incorporate a stainless steel braided PEX lined flexible hose assembly, connecting the spout to the solenoid valve. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2310092
Expiry date:
31/10/2028
Size:
15mm Spigot
Marking:
Stern logo on spout.
Installation Requirements:
R001 R007 R040
Model:
350200 Tubular B 350100 Tubular E 350210 Tubular LB 350120 Tubular LE 350215 Tubular XLB 350415 Tubular XLE 350208 Tubular B AISI316 350109 Tubular E AISI316 350213 Tubular LB AISI316 350124 Tubular LE AISI316
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2309074

Range of single hole, single outlet, electronic touch free, deck mounted taps (chromium plated brass) for cold or premixed water. Flow is controlled via solenoid valves, actuated by infra-red sensors. Power is supplied by externally mounted 9V battery pack or 9V transformer. The inlet hoses have a stainless-steel strainer and the spout outlets incorporate plastic aerators. Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2309074
Expiry date:
30/09/2028
Size:
Stainless steel braided, PEX lined hose with 3/8” BSP captive nut.
Marking:
Dolphin Logo on body.
Installation Requirements:
R001 R006 R009
Model:
Dolphin Blue DB100-SHS Dolphin Blue DB125-SHS Dolphin Blue DB100-STL Dolphin Blue DB125-STL
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2212105

Range of deck mounted taps for cold or premixed water with stainless steel bodies. Flow is controlled by a solenoid valve activated via an infra-red sensor, and the spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connection hose. Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212105
Expiry date:
31/12/2027
Size:
Solenoid with 10mm spigot.
Marking:
Dolphin logo on tap body.
Installation Requirements:
R001 R006 R007
Model:
DB130S.316.dd.eee DB135S.316.dd.eee DB130.316.dd.eee DB135.316.dd.eee DB200.316.dd.eee DB225.316.dd.eee DB200.SSL.316.dd.eee DB225.SSL.316.dd.eee
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2212106

Range of single hole, single outlet, electronically controlled tap assemblies (chrome/satin plated brass body). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connection hose. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212106
Expiry date:
31/12/2027
Size:
10mm spigot.
Marking:
Lovair on tap body.
Installation Requirements:
R001 R006 R007
Model:
L192CS (Satin Finish) & L192C (Chrome Finish)
Factor:
Lovair The Splash Lab
Company Name
Lovair The Splash Lab
Address
Unit 34 Meadow Industrial Estate, Water Street Stockport
Postcode
SK1 2 BU

View All Listings by this Company

Print This Approval


#2212107

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The main body incorporates a stainless-steel strainer prior to the solenoid. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2212107
Expiry date:
31/12/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies with 3/8” BSP captive nut end connections.
Marking:
Lovair on operating member.
Installation Requirements:
R001 R006 R009
Model:
L.992CS & L992C
Factor:
Lovair The Splash Lab
Company Name
Lovair The Splash Lab
Address
Unit 34 Meadow Industrial Estate, Water Street Stockport
Postcode
SK1 2 BU

View All Listings by this Company

Print This Approval


#2310127

Range of wall mounted, single-hole, single outlet, electronically controlled combination tap assemblies, (chrome plated brass or stainless steel bodies). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The products incorporate a stainless steel braided PEX lined flexible hose assembly, connecting the spout to the solenoid valve. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2310127
Expiry date:
31/10/2028
Size:
15mm Spigot
Marking:
Dolphin logo on body.
Installation Requirements:
R001 R007 R040
Model:
Dolphin Blue DB400 Dolphin Blue DB425 Dolphin Blue DBL400 Dolphin Blue DBL425 Dolphin Blue DBXL400 Dolphin Blue DBXL425 Dolphin Blue DB400-316 Dolphin Blue DB425-316 Dolphin Blue DBL400-316 Dolphin Blue DBL425-316
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2310128

Range of wall mounted, electronically controlled combination tap assemblies, (chrome plated brass or stainless steel bodies). The flow is controlled by a solenoid valve that is activated via an infra-red sensor The spout outlet incorporates a plastic aerator. The product incorporates a stainless steel braided PEX lined flexible connection hose assembly, connecting the spout to the solenoid valve. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2310128
Expiry date:
31/10/2028
Size:
1/2" BSP (M) X 10mm spigot solenoid valve
Marking:
Dolphin logo on body.
Installation Requirements:
R001 R009 R040
Model:
DB1400, DB1425, DBL1400, DBL1425, DB1400-316, DB1425-316, DBL1400-316 & DBL1425-316 COMBINATION TAP ASSEMBLIES.
Factor:
Dolphin Solutions Ltd
Company Name
Dolphin Solutions Ltd
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2310352

Wall mounted, metal, single outlet, fixed combination tap assemblies. Flow is controlled by a solenoid valve activated by via an infra-red sensor and temperature adjusted via a single lever operating member. The Inlets incorporate stainless steel strainers & approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2310352
Expiry date:
31/10/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8" captive nut end connections.
Marking:
Grohe logo on body.
Installation Requirements:
R001 R009 R040
Model:
Grohe “Eurosmart CE” - 36.376. Grohe “Eurosmart CE” - 36.315, Grohe “Eurosmart CE” - 36.412. To be installed with installation set 36.339.001.
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg 58675 Hemer
Country
Germany
Phone
02372 930

View All Listings by this Company

Print This Approval


#2311001

Range of wall mounted, single hole, single outlet, fixed, electronically controlled tap assemblies (chrome plated brass bodies). Flow is controlled via an infra-red activated solenoid valve and the spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2311001
Expiry date:
30/11/2028
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating a ½” BSP captive nut end connection x 10mm push fit spigot.
Marking:
Stern on body
Installation Requirements:
R001 R009 R040
Model:
Tubular Touch B Tubular Touch E
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2311010

Range of single hole, single outlet (fixed) electronically controlled tap assemblies in (chrome plated brass bodies). Flow is controlled with a solenoid valve activated via an infra-red sensor. The temperature is controlled via a single lever operating member on the body. The inlets incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic aerator. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2311010
Expiry date:
30/11/2028
Size:
Stainless Steel braided PEX lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections.
Marking:
Y Stern logo on body
Installation Requirements:
R001 R006 R009 R010
Model:
231200 231400 231210 231410
Factor:
Y Stern Engineering (1989) Ltd
Company Name
Y Stern Engineering (1989) Ltd
Address
15 Gan Rave Blud 8122217 Yavne Israel

View All Listings by this Company

Print This Approval


#2311021

Range of single hole, single outlet, fixed, electronically controlled combination tap assemblies, (chrome plated brass bodies). Flow is controlled via an infra-red activated solenoid valve and the spout outlets incorporate plastic aerators. A stainless steel braided PEX lined flexible hose connects the components. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 45°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2311021
Expiry date:
30/11/2028
Size:
½” BSP (M)
Marking:
Saitong log on tap body
Installation Requirements:
R001 R006 R007
Model:
AF1001 AF1002 AF1003 AF1004 AF1005 AF1007
Manufacturer:
Wenzhou Saitong Intelligent Technology Co., Ltd
Company Name
Wenzhou Saitong Intelligent Technology Co., Ltd
Address
No.41,Jinshan Road,Haicheng Street Longwan District,Wenzhou, Zhejiang,China

View All Listings by this Company

Print This Approval


#2311300

Single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlets incorporate a plastic aerator and flow regulator. The tap incorporates a soap dispenser with separate dispensing nozzle. Maximum working pressure 8.0 Bar. Maximum operating temperature 55°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2311300
Expiry date:
30/11/2028
Size:
½” BSP (M)
Marking:
MEDICLINICS Logo on front body
Installation Requirements:
R001 R006 R009
Model:
GAJ002AC Sensor operated water + soap dispenser tap
Factor:
Mediclinics S.A.
Company Name
Mediclinics S.A.
Address
Industria, 54 * E‐08025 BARCELONA (
Country
Spain

View All Listings by this Company

Print This Approval


#2311070

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel or brass bodies – various finishes). Flow is controlled via solenoid valve (housed in a control box) actuated via an infra-red sensor, the inlets to the control box incorporate stainless steel strainers. The spout outlets incorporates plastic aerators. The products incorporate a stainless steel PEX lined flexible hose assembly, connecting the tap to the solenoid valve. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2311070
Expiry date:
30/11/2028
Size:
3/8” BSP (M)
Marking:
Vola logo on body
Installation Requirements:
R001 R006 R007
Model:
VOLA RB1E-XX Brass VOLA RB1E-XX Stainless Steel Where XX denotes the surface finish (Stainless Steel Versions): 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold, 71 = Brushed Dark Copper. Where XX denotes the surface finish (Brass Versions): 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2, 8700 Horsens
Country
Denmark

View All Listings by this Company

Print This Approval


#2311022

Range of wall mounted single hole, single outlet, fixed, electronically controlled tap assemblies (chrome plated brass bodies). Flow is controlled via an infra-red activated solenoid valve and model AF 1602 incorporates a plastic aerator in the spout outlet. Maximum working pressure 8.0 Bar Maximum operating temperature 45.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2311022
Expiry date:
30/11/2028
Size:
1/2" BSP (M)
Marking:
Saitong on tap body
Installation Requirements:
R001 R007 R010 R040
Model:
AF1601 AF1601-130 AF1602
Manufacturer:
Wenzhou Saitong Intelligent Technology Co., Ltd
Company Name
Wenzhou Saitong Intelligent Technology Co., Ltd
Address
No.41,Jinshan Road,Haicheng Street Longwan District,Wenzhou, Zhejiang,China

View All Listings by this Company

Print This Approval


#2311026

Single hole, single outlet (fixed) electronically controlled, combination tap assemblies (chromium plated brass). Flow is controlled via solenoid valves, actuated by infra-red sensors. Temperature is controlled independently using a single lever operating member on the side of the body. The spout outlets incorporate plastic aerators. Maximum working pressure 8 Bar Maximum operating temperature 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2311026
Expiry date:
30/11/2028
Size:
Stainless steel braided PEX lined flexible hoses incorporating ½” BSP (F) captive nut end connections.
Marking:
Solex on body
Installation Requirements:
R001 R006 R009 R010
Model:
A54084
Manufacturer:
Xiamen Solex High-tech Industries Co.,Ltd
Company Name
Xiamen Solex High-tech Industries Co.,Ltd
Address
2 F HSIN RONG BUILDING NO 54 HU LI BLVD HU-LI ZONE 361006

View All Listings by this Company

Print This Approval


#2310140

Range of wall mounted, electronically controlled combination tap assemblies, (chrome plated brass or stainless steel bodies). The flow is controlled by a solenoid valve that is activated via an infra-red sensor The spout outlet incorporates a plastic aerator. The product incorporates a stainless steel braided PEX lined flexible connection hose assembly, connecting the spout to the solenoid valve. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2310140
Expiry date:
31/10/2028
Size:
1/2" BSP (M) X 10mm spigot solenoid valve
Marking:
Dudley on base of tap body.
Installation Requirements:
R001 R009 R040
Model:
Electroflo Horizon Battery Electroflo Horizon Mains
Factor:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 557 7000
General Email
sales@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2312002

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (brass bodies - various finishes). Flow is controlled via a solenoid valve activated via an infra-red sensor. The temperature is controlled manually with a single lever operating member. The spout outlet incorporates a plastic aerator. The inlets incorporate single check valve cartridges, however, the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2312002
Expiry date:
31/12/2028
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Stern logo on body
Installation Requirements:
R001 R006 R009 R010
Model:
235500 235600 235510 235610 235550 235650 235551 235651
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#2312040

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies), incorporating a solenoid valve controlling the flow which is actuated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The product also incorporates an integral hand dryer. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 43°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2312040
Expiry date:
31/12/2028
Size:
½” BSP M
Marking:
Dyson and Model on top of tap body
Installation Requirements:
R001 R006 R007
Model:
WD04 WD05
Factor:
Dyson Manufacturing SDN BHD.
Company Name
Dyson Manufacturing SDN BHD.
Address
Plo 208 Jalan Cyber 14 Senai Industrial Etsate IV
Country
81400 Senai

View All Listings by this Company
Manufacturer:
Meiban Technologies (M) Sdn. Bhd.
Company Name
Meiban Technologies (M) Sdn. Bhd.
Address
NO 1A, 1B & 1C Jalan Istimewa 5 Taman Perindustrian Cmerlang
Country
81800 Ulu Tiram

View All Listings by this Company

Print This Approval


#2312041

Wall mounted single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies), incorporating a solenoid valve controlling the flow which is actuated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The product also incorporates an integral hand dryer. Maximum working pressure 8.0 Bar

Non-metallic materials and components comply with BS6920 at 43°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2312041
Expiry date:
31/12/2028
Size:
½” BSP M
Marking:
Dyson and Model on top of tap body
Installation Requirements:
R001 R007 R040
Model:
WD06
Factor:
Dyson Manufacturing SDN BHD.
Company Name
Dyson Manufacturing SDN BHD.
Address
Plo 208 Jalan Cyber 14 Senai Industrial Etsate IV
Country
81400 Senai

View All Listings by this Company
Manufacturer:
Meiban Technologies (M) Sdn. Bhd.
Company Name
Meiban Technologies (M) Sdn. Bhd.
Address
NO 1A, 1B & 1C Jalan Istimewa 5 Taman Perindustrian Cmerlang
Country
81800 Ulu Tiram

View All Listings by this Company

Print This Approval


#2312309

Range of wall mounted single hole, single outlet (fixed) electronically controlled tap assemblies, (chrome plated - brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlets incorporate a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2312309
Expiry date:
31/12/2028
Size:
½” BSP(M)
Marking:
TCK on body
Installation Requirements:
R001 R040
Model:
LT011B LT012A LT012C LT012D LT048C LT0048 LT0086
Manufacturer:
Xiamen OLT Co., Ltd.
Company Name
Xiamen OLT Co., Ltd.
Address
No.950, Tonglong 2nd Road, Xiamen Torch High-tech Zone (Xiang'an) Industrial Zone, Xiamen City
Country
China

View All Listings by this Company

Print This Approval


#2312310

Range of single hole, single outlet (fixed) electronically controlled tap assemblies, (Chrome plated - brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2312310
Expiry date:
31/12/2028
Size:
½” BSP (M)
Marking:
TCK on body
Installation Requirements:
R001 R006
Model:
LT0049 LT0082 LT0014 LT0015 LT0035 LT0042 LT0097 LT015B
Manufacturer:
Xiamen OLT Co., Ltd.
Company Name
Xiamen OLT Co., Ltd.
Address
No.950, Tonglong 2nd Road, Xiamen Torch High-tech Zone (Xiang'an) Industrial Zone, Xiamen City
Country
China

View All Listings by this Company

Print This Approval


#2312370

Range of single hole, single outlet (fixed) electronically controlled tap assemblies, (Chrome plated - brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2312370
Expiry date:
31/12/2028
Size:
½” BSP (M)
Marking:
Bristan on body
Installation Requirements:
R001 R006
Model:
IRBS1-CP & 3478J
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Country
Tamworth
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2312371

Range of wall mounted single hole, single outlet (fixed) electronically controlled tap assemblies, (chrome plated - brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlets incorporate a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2312371
Expiry date:
31/12/2028
Size:
½” BSP(M)
Marking:
Bristan on Spout.
Installation Requirements:
R001 R040
Model:
IRWS1-CP
Factor:
Bristan Group Limited
Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Country
Tamworth
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

Print This Approval


#2312372

Range of single hole, single outlet (fixed) electronically controlled tap assemblies, (Chrome plated - brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2312372
Expiry date:
31/12/2028
Size:
½” BSP (M)
Marking:
Saracen on body.
Installation Requirements:
R001 R006
Model:
C66102
Factor:
Wolseley UK
Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

Print This Approval


#2312373

Range of single hole, single outlet (fixed) electronically controlled tap assemblies, (Chrome plated - brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2312373
Expiry date:
31/12/2028
Size:
½” BSP (M)
Marking:
AQUAECO on body.
Installation Requirements:
R001 R006
Model:
AQE-ECO-I301-XX MONO TOUCHLESS BASIN TAP AQE-ECO-I302-XX DECK MOUNTED MINI TOUCHLESS TAP AQE-ECO-I302T-XX DECK MOUNTED TALL TOUCHLESS TAP XX’ denotes finish and is replaced with: Chrome Brushed Nickel Matt Black Anthracite Lacquered Zanzibar Gold PVD Gold Soft Bronze Santiago Oyster Burgundy
Factor:
AQUAZONE/BAGNODESIGN (SANIPEXGROUP)
Company Name
AQUAZONE/BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall
Postcode
WF17 9LU
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2312374

Range of wall mounted single hole, single outlet (fixed) electronically controlled tap assemblies, (chrome plated - brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlets incorporate a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2312374
Expiry date:
31/12/2028
Size:
½” BSP(M)
Marking:
AQUAECO on body
Installation Requirements:
R001 R040
Model:
AQE-ECO-I303-XX WALL MOUNTED TOUCHLESS BASIN TAP AQE-ECO-I307-XX WALL MOUNTED TOUCHLESS BASIN TAP AQE-SMO-I305-XX WALL MOUNTED TOUCHLESS BASIN TAP XX’ denotes finish and is replaced with: Chrome Brushed Nickel Matt Black Anthracite Lacquered Zanzibar Gold PVD Gold Soft Bronze Santiago Oyster Burgundy
Factor:
AQUAZONE/BAGNODESIGN (SANIPEXGROUP)
Company Name
AQUAZONE/BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall
Postcode
WF17 9LU
Country
United Kingdom

View All Listings by this Company

Print This Approval


#240102030

Single hole, single outlet (fixed) electronically controlled tap assemblies (either black finish or chromium plated brass bodies). Flow is controlled by a solenoid valve which is actuated via an infra-red sensor. The spout incorporates a stainless-steel strainer on the outlet. The product is supplied with a stainless steel braided PEX lined flexible hose assembly and a combination valve with a DZR brass body consisting of a servicing valve, a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2), a stainless-steel strainer and plastic flow regulator on the outlet. The combination valve has a compression inlet for use with copper pipe (manufactured to BS EN 1057). The tap incorporates a soap dispenser with a separate dispensing nozzle. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
240102030
Expiry date:
31/01/2029
Note:
R008 applies to the Premix control unit. The product is not supplied with any connecting hoses/pipework between the Premix control unit and the spout. R008 applies to the solenoid valve.
Size:
15mm compression (to combination valve).
Marking:
Ideal Standard on body.
Installation Requirements:
R001 R006 R007 R008 R570
Model:
A7512AA (chrome). A7512B3 (black finish).
Factor:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT

View All Listings by this Company

Print This Approval


#240102031

Wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (either black finish or chromium plated brass bodies). Flow is controlled by a solenoid valve which is actuated via an infra-red sensor. The spout incorporates a stainless-steel strainer on the outlet. The product is supplied with a stainless steel braided PEX lined flexible hose assembly and a combination valve with a DZR brass body consisting of a servicing valve, a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2), a stainless-steel strainer and plastic flow regulator on the outlet. The combination valve has a compression inlet for use with copper pipe (manufactured to BS EN 1057). The tap incorporates a soap dispenser with a separate dispensing nozzle. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
240102031
Expiry date:
31/01/2029
Note:
R008 applies to the Premix control unit. The product is not supplied with any connecting hoses/pipework between the Premix control unit and the spout. R008 applies to the solenoid valve.
Size:
15mm compression (to combination valve).
Marking:
Ideal Standard on body.
Installation Requirements:
R001 R007 R008 R040 R570
Model:
A7708AA (chrome). A7708B3 (black finish).
Factor:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT

View All Listings by this Company

Print This Approval


#240104016

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies comprising of a concealed brass body and a separate spout and trim set (chromium plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The inlets (within the) concealed body incorporate a plastic filter and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 5 bar. Maximum operating temperature 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
240104016
Expiry date:
31/01/2029
Size:
½” BSP (F)
Marking:
Gessi etched on face plate of spout
Installation Requirements:
R001 R040
Model:
44665 58105 (for use with 44665) 58107 (for use with 44665)
Factor:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company

Print This Approval


#2312375

Range of single hole, single outlet (fixed) electronically controlled tap assemblies, (Chrome plated - brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2312375
Expiry date:
31/12/2028
Size:
½” BSP (M)
Marking:
MP Company logo on body.
Installation Requirements:
R001 R006
Model:
MP111E
Factor:
Modular Products Ltd
Company Name
Modular Products Ltd
Address
Modular Products Ltd Unit 1, Modular Business Park Norton Road, Stevenage
Postcode
SG1 2FZ
Country
Stevenage
General Email
steven.lai@modular-products.co.uk

View All Listings by this Company

Print This Approval


#2312376

Range of single hole, single outlet (fixed) electronically controlled tap assemblies, (Chrome plated - brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2312376
Expiry date:
31/12/2028
Size:
½” BSP (M)
Marking:
MP Company Logo on body
Installation Requirements:
R001 R006
Model:
MP112E
Factor:
Modular Products Ltd
Company Name
Modular Products Ltd
Address
Modular Products Ltd Unit 1, Modular Business Park Norton Road, Stevenage
Postcode
SG1 2FZ
Country
Stevenage
General Email
steven.lai@modular-products.co.uk

View All Listings by this Company

Print This Approval


#2312377

Range of single hole, single outlet (fixed) electronically controlled tap assemblies, (Chrome plated - brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2312377
Expiry date:
31/12/2028
Size:
½” BSP (M)
Marking:
MP Company Logo on body.
Installation Requirements:
R001 R006
Model:
MP114E
Factor:
Modular Products Ltd
Company Name
Modular Products Ltd
Address
Modular Products Ltd Unit 1, Modular Business Park Norton Road, Stevenage
Postcode
SG1 2FZ
Country
Stevenage
General Email
steven.lai@modular-products.co.uk

View All Listings by this Company

Print This Approval


#2312378

Range of wall mounted single hole, single outlet (fixed) electronically controlled tap assemblies, (chrome plated - brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlets incorporate a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2312378
Expiry date:
31/12/2028
Size:
½” BSP(M)
Marking:
MP Company Logo on body
Installation Requirements:
R001 R040
Model:
MP105E
Factor:
Modular Products Ltd
Company Name
Modular Products Ltd
Address
Modular Products Ltd Unit 1, Modular Business Park Norton Road, Stevenage
Postcode
SG1 2FZ
Country
Stevenage
General Email
steven.lai@modular-products.co.uk

View All Listings by this Company

Print This Approval


#2312379

Range of wall mounted single hole, single outlet (fixed) electronically controlled tap assemblies, (chrome plated - brass bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlets incorporate a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2312379
Expiry date:
31/12/2028
Size:
½” BSP(M)
Marking:
MP Company Logo on tap base
Installation Requirements:
R001 R040
Model:
MP102E
Factor:
Modular Products Ltd
Company Name
Modular Products Ltd
Address
Modular Products Ltd Unit 1, Modular Business Park Norton Road, Stevenage
Postcode
SG1 2FZ
Country
Stevenage
General Email
steven.lai@modular-products.co.uk

View All Listings by this Company

Print This Approval


#240202025

Range of wall mounted, single hole, single outlet (fixed) electronically operated tap assemblies incorporating stainless-steel bodies (various finishes - see model). Flow is controlled via solenoid valve and actuated by a capacitive (TSL-881/883) or infra-red (TSL-882/884) sensor. The products can also be supplied with an additional plastic aerator (from a choice of two). Maximum working pressure 7.5 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
240202025
Expiry date:
28/02/2029
Note:
R008 applies to the solenoid valve.
Size:
½” BSP (M).
Marking:
+TSL on spout.
Installation Requirements:
R001 R007 R008 R040
Model:
TSL-881XX, TSL-882XX, TSL-883XX, TSL-884XX. Where XX denotes finish and can be replaced with: BK – brushed finish, PVD coated Black. BR – brushed finish, PVD coated Brass. BZ – brushed finish, PVD coated Bronze. CP – brushed finish, PVD coated Copper. CS – brushed finish Stainless Steel. C – Chromed Stainless Steel.
Factor:
The Splash Lab UK
Company Name
The Splash Lab UK
Address
Unit 34 Meadow Industrial Estate Stockport
Postcode
SK1 2BU
Country
United Kingdom

View All Listings by this Company

Print This Approval


#240202035

Range of single hole, single outlet, (fixed), electronically controlled combination tap assemblies (chrome plated brass or stainless steel bodies). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 Bar. Maximum operating temperature 70.0°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
240202035
Expiry date:
28/02/2029
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections.
Marking:
Stern logo on body
Installation Requirements:
R001 R006 R009 R010
Model:
236900 Trendy 1000 TB 236910 Trendy 1000 TE
Factor:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd 8122217 Yavne ISRAEL

View All Listings by this Company

Print This Approval


#240202041

Range of single-hole, single outlet (fixed) electronically controlled combination tap assemblies (brass bodies – chrome plated). The flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a single lever operating on the side of the body. The spout outlets incorporate plastic flow straighteners. The inlet hoses incorporate an approved single check valve cartridge, however, the complete assembly has not been tested to demonstrate it provides backflow protection. The products are supplied with single lever spherical valves. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
240202041
Expiry date:
28/02/2029
Size:
Stainless-steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Delabie on operating member
Installation Requirements:
R001 R006 R009 R040
Model:
44900015 44900115 44900615 49900015 49900115 49900615
Factor:
Delabie Ltd.
Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Country
Oxfordshire
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:
Delabie SAS
Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

Print This Approval


#2309342

Wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies, (chromium plated brass body). Flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The inlet adapters incorporate stainless steel filters and single check valve cartridges verified by test (suitable for backflow protection against Fluid Category 2 ). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2309342
Expiry date:
30/09/2028
Size:
3/8” BSP (F).
Marking:
Keuco on faceplate
Installation Requirements:
R001 R040
Model:
59517 xx11zz.
Manufacturer:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36, 58675 Hemer
Country
Germany
Phone
+49 (0)2372/904-0

View All Listings by this Company

Print This Approval


#2305356

Range of wall mounted, electronically operated combination tap assembly (chrome plated brass body). The flow is controlled by a solenoid valve which is actuated via an infrared sensor. The spout outlets incorporate a plastic aerator. The solenoid valve inlet incorporates a plastic and stainless steel filter. The products are supplied with a triple layered connecting hose (PVC inner and outer layer and nylon braided middle layer). Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2305356
Expiry date:
31/05/2028
Note:
R008 applies to the solenoid and solenoid housing.
Size:
½” BSP (M)
Marking:
Twyford on operative member and DTC28 on the rear.
Installation Requirements:
R001 R007 R008 R010
Model:
SF1249CP
Factor:
Twyford Bathrooms Geberit Service
Company Name
Twyford Bathrooms Geberit Service
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.