Combination Tap Assemblies

Section Code 0683 : Multiple Function Products listed in this section are supplied or intended for use with additional assemblies of fittings enabling the facility for chilled, boiling, carbonated or filtered water to be dispensed at the outlet. These taps may also dispense standard hot and ambient water, as will be specified in the description.

Back To Directory Sections

#2006070

Five-hole, single outlet (fixed) combination tap assembly with brass bodies (various finishes), incorporating a quarter turn ceramic disc headworks to control the flow and a manual diverter to shower outlet both with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0683 Combination Tap Assemblies
Section Subtitle:
Multiple Function Products listed in this section are supplied or intended for use with additional assemblies of fittings enabling the facility for chilled, boiling, carbonated or filtered water to be dispensed at the outlet. These taps may also dispense standard hot and ambient water, as will be specified in the description.
WRAS Approval Number:
2006070
Expiry date:
30/06/2025
Size:
¾” BSP (M)
Marking:
Coalbrook logo on hand set and on rear of hand set holster
Installation Requirements:
R001 R006 R020
Model:
XX2000YY XX denotes the trim and can be replaced with: DO – Domo DC – Decca Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass
Factor:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS

View All Listings by this Company

Print This Approval


#2304349

3-in1 single hole, single outlet (swivel) combination tap assembly (chromium plated or brushed stainless steel PVD brass). The cold//hot/mixed water circuit incorporates a ceramic cartridge headwork with a single lever operating member. The near boiling water circuit incorporates a quarter turn ceramic disc headwork with a single lever operating member. The tap is supplied with a stainless steel braided PEX lined flexible hose assembly, brass adaptor incorporating a plastic flow regulator, NBR washer and plastic adaptor to connect the tap to the near boiling water unit (not supplied) and a PTFE flexible pipe to deliver near boiling water back to the tap. The spout outlet incorporates a plastic aerator, which includes a central stainless steel tube insert throughout the near boiling water outlet of the aerator. Maximum working pressure 10.0 bar. Maximum operating temperatures: 65°C (cold/hot/mixed water circuit). 99°C (near boiling water circuit after boiler unit, cold supply only prior to boiler unit).

Section:
0683 Combination Tap Assemblies
Section Subtitle:
Multiple Function Products listed in this section are supplied or intended for use with additional assemblies of fittings enabling the facility for chilled, boiling, carbonated or filtered water to be dispensed at the outlet. These taps may also dispense standard hot and ambient water, as will be specified in the description.
WRAS Approval Number:
2304349
Expiry date:
30/04/2028
Note:
This approval does not include a boiler unit for the near boiling water circuit. R008 applies to the plastic adaptor for connection to the near boiling water unit, and the PTFE hose for the near boiling water supply into the tap.
Size:
Stainless steel braided PEX lined flexible hose assemblies (x3) incorporating ½” captive nut end connections.
Marking:
Paini and Paini logo on rear of body.
Installation Requirements:
R001 R006 R007 R008 R009 R010
Model:
64CR493GAU (chrome-plated), 64PW493GAU (brushed stainless steel PVD).
Manufacturer:
Paini S.p.A. Rubinetterie
Company Name
Paini S.p.A. Rubinetterie
Address
Via Cremosina 43 28076 Pogno (NO)
Country
Italy
Phone
+39 0322 9971

View All Listings by this Company

Print This Approval


#2307066

Single hole, triple outlet (swivel) combination tap assembly (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with single lever operating member. Electronic controls allow the tap to dispense boiling, chilled or sparkling water. The vented models are supplied with a brass adaptor containing a plastic flow regulator and a combined EPDM washer and stainless-steel strainer, for installation on the mains cold water into the ceramic cartridge. They are also supplied with a stainless steel braided PEX lined flexible hose assembly and a stainless steel braided TPSiV lined flexible hose assembly both with ½” captive nut end connections for installation between the tap and a command centre, (which is not included as part of this approval). Maximum working pressure 5.0 bar. Maximum operating temperatures: Near boiling water circuit: 100°C. Ambient hot and cold (mixed) circuit: 65°C. Chilled/Chilled and sparkling circuit: Cold water use only.

Section:
0683 Combination Tap Assemblies
Section Subtitle:
Multiple Function Products listed in this section are supplied or intended for use with additional assemblies of fittings enabling the facility for chilled, boiling, carbonated or filtered water to be dispensed at the outlet. These taps may also dispense standard hot and ambient water, as will be specified in the description.
WRAS Approval Number:
2307066
Expiry date:
31/07/2028
Note:
R008 applies to items on the chilled and sparkling circuit.
Size:
Mains models: Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections. Vented models: Stainless steel braided PEX lined flexible hose assembly with ½” captive nut end connection.
Marking:
Zip logo (‘Zip’) on operating member.
Installation Requirements:
R001 R006 R007 R008 R009 R160
Model:
HydroTap Classic Plus All In One range: 91625XXX: BC Mains, 91626XXX: BCS Mains, 91633XXX: BC Vented, 91634XXX: BC Vented. Where XXX denotes finish: Blank = Bright Chrome, Z01 = Brushed Chrome, Z03 = Matt Black. HydroTap Classic All In One range: 93331UK: BC Mains (Bright Chrome), 93339UK: BC Mains (Brushed Chrome), 93355UK: BC Mains (Matt Black), 93335UK: BCS Mains (Bright Chrome), 93343UK: BCS Mains (Brushed Chrome), 93359UK: BCS Mains (Matt Black), 93332UK: BC Vented (Bright Chrome), 93340UK: BC Vented (Brushed Chrome), 93356UK: BC Vented (Matt Black), 93336UK: BCS Vented (Bright Chrome), 93344UK: BCS Vented (Brushed Chrome), 93360UK: BCS Vented (Matt Black). Where (for all models): B = (Near) Boiling water. C = Chilled water. S = Sparkling water.
Factor:
Zip Heaters UK Ltd T/A Zip Water UK
Company Name
Zip Heaters UK Ltd T/A Zip Water UK
Address
Trafalgar House, Trafalgar Business Park, Dereham
Postcode
NR19 1JG
Phone
0345 600 5005

View All Listings by this Company
Manufacturer:
Zip Industries (Aust) Pty Ltd.
Company Name
Zip Industries (Aust) Pty Ltd.
Address
67 Allingham Street Condell Park NSW 2200
Country
Australia

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.