Combination Tap Assemblies - Components

Section Code 0435 : Aerators, Flow Straighteners, Flow Regulators and Restrictors.

Back To Directory Sections

#1907344

Range of aerators with plastic bodies and EPDM ‘O’-rings. Maximum operating temperature 60°C

Section:
0435 Combination Tap Assemblies - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
1907344
Expiry date:
31/07/2024
Note:
Open outlet use only.
Size:
M22 or M24
Marking:
Neoperl Logo and technical information on body
Installation Requirements:
R001
Model:
Clinic Snap range comprising of models: PL-HC-STD-CLINIC-SNAP-OR-V-lam Red - 01.3631.000. PL-HC-STD-CLINIC-SNAP-OR-V-lam Yellow - 01.3632.000. PL-HC-STD-CLINIC-SNAP-OR-V-lam Blue - 01.3633.000. PL-HC-STD-CLINIC-SNAP-OR-V-lam Green - 01.3634.000. Clinic Honeycomb range comprising of models: PL-HC CLINIC-STD-IT-Z-lam Blue - 40.2102.0A0. PL-HC CLINIC-STD-IT-Z-lam Green - 40.2102.0B0. PL-HC CLINIC-STD-IT-Z-lam Red - 40.2102.0C0. PL-HC CLINIC-STD-IT-Z-lam Yellow - 40.2102.0F0. PL-HC CLINIC-STD-IT-T-lam Blue - 40.2110.0A0. PL-HC CLINIC-STD-IT-T-lam Green - 40.2110.0B0. PL-HC CLINIC-STD-IT-T-lam Red - 40.2110.0C0. PL-HC CLINIC-STD-IT-T-lam Yellow - 40.2110.0F0. Clinic Neostrahl range comprising of models: FS CLINIC-STD IT Red - 02.4060.000. FS CLINIC-STD IT Yellow - 02.4061.000. FS CLINIC-STD IT Green - 02.4062.000. FS CLINIC-STD IT Blue - 02.4063.000.
Manufacturer:
Neoperl UK Ltd & Neoperl GmbH
Company Name
Neoperl UK Ltd & Neoperl GmbH
Address
Nimrod Works Enigma Park Malvern
Postcode
WR14 3GH
Country
Worcs
Phone
+44 (0) 1684 564869 Fax: 01684 561222

View All Listings by this Company

Print This Approval


#1911902

Range of tap regulators, comprising of an EPDM ‘O’-ring (M22 model) or flat seal (M24 model), a plastic flow regulator and a plastic aerator with a stainless steel strainer housed within a chrome plated brass body. Maximum operating temperature 85°C.

Section:
0435 Combination Tap Assemblies - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
1911902
Expiry date:
30/11/2024
Note:
Open outlet use only.
Size:
See model.
Marking:
HL2024 (brand of HGP), KIWA and OLZ on body.
Installation Requirements:
R001 R040
Model:
HL2024 M22: M22 female inlet. HL2024 M24: M24 male inlet.
Manufacturer:
HaGePe International B.V (HGP International)
Company Name
HaGePe International B.V (HGP International)
Address
Huizermaatweg 27-2 1273 NA Huizen
Country
Netherlands

View All Listings by this Company

Print This Approval


#2007800

All pressure, single fixed, dual fixed and variable flow rate ranges of constant flow regulators. Maximum operating temperature (Grey, Natural & White) 85°C. Models UDC ll, N & N-cart have a maximum operating temperature of 60°C.

Section:
0435 Combination Tap Assemblies - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2007800
Expiry date:
31/07/2025
Note:
Open outlet use only. Claims for flow rate, accuracy & working pressure by are made by the manufacturer and not considered part of the listing.
Size:
Smallest bore diameter 7mm, largest bore diameter 24mm
Marking:
NP on body Some model are not marked due to size
Installation Requirements:
R001
Model:
Generic Families; MR01, MR03, MR05, MR06, SHS, SHL-C, SH-DW, SH-E, SH-F, SH-G A, E, F, G, H, L, MR04 Cart, Cartridge PCW-01, PCW-02 D Multi UDC II 58.5721.0 Universal D Cartridge - Adjustable flow regulator Models added July 2020: N & N-cart
Manufacturer:
Neoperl GmbH & Neoperl UK
Company Name
Neoperl GmbH & Neoperl UK
Address
Klosterrunstrasse 9-11, Mullheim, D-79379
Country
Germany

View All Listings by this Company

Print This Approval


#2012057

An aerator attachment for a mixer tap with a black plastic body and NBR O-rings. The outlet incorporates a stainless-steel strainer. This product incorporates swivel joint and a mechanism that alters the flow from jet to spray. Maximum working temperature 60°C.

Section:
0435 Combination Tap Assemblies - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2012057
Expiry date:
31/12/2025
Note:
Open outlet use only.
Size:
M22 thread
Marking:
Siroflex Italy on body.
Installation Requirements:
R001 R040
Model:
G&N 073 mixer tap attachment.
Factor:
G&N International
Company Name
G&N International

View All Listings by this Company
Manufacturer:
Siroflex
Company Name
Siroflex
Address

View All Listings by this Company

Print This Approval


#2109334

Aerator with a plastic body, brass housing and EPDM washer. Maximum operating temperature 85°C.

Section:
0435 Combination Tap Assemblies - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2109334
Expiry date:
30/09/2026
Note:
Open outlet use only.
Size:
M20 threaded connection
Marking:
Tomlinson on body
Installation Requirements:
R001
Model:
M200ZC
Factor:
Tomlinson Industries
Company Name
Tomlinson Industries
Address
13700 Broadway Ave Garfield Heights Cleveland
Country
Ohio 44125
Phone
Tel: 216 587 3400 Fax: 216 587 0733

View All Listings by this Company

Print This Approval


#2204073

Range of low flow rate tap regulators and spray changers, comprising of an EPDM ‘O’-ring, with a stainless-steel strainer housed within a brass body with chrome plated brass trim piece. Maximum working pressure Open outlet use. Maximum operating temperature 85.0°C

Section:
0435 Combination Tap Assemblies - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2204073
Expiry date:
30/04/2027
Size:
OD 15mm
Marking:
ALTERED logo on body
Installation Requirements:
R001 R040
Model:
Altered:Nozzle Dual Flow Pro (article number: 1001) Altered:Nozzle Single Flow Dome (article number: 1002) Altered:Nozzle Single Flow Spray (article number: 1003) Available in 3 options: Standard – this size fits Female M22x1 and Male M24x1 housing Junior – this size fits US Female 3/4"–27 UNS-2B and US Male 13/16"–27 UNS-2A housing Tom Thumb – this size fits Female M16x1 and Male M18x1
Factor:
Altered Stockholm AB
Company Name
Altered Stockholm AB
Address
Drottninggatan 59 SE-11121 Stockholm
Country
Sweden

View All Listings by this Company

Print This Approval


#2211812

‘Bubblestream’ range of tap outlet (stream shaper) adaptors incorporating a swivel mechanism and a stainless steel mesh aerator. All models, apart from 07.9870.0, are supplied with a M22 to M24 adaptor. All models, apart from 07.9870.0 & 07.9880.0, incorporate a plastic flow regulator. Maximum operating temperature 60°C.

Section:
0435 Combination Tap Assemblies - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2211812
Expiry date:
30/11/2027
Note:
Open outlet use only Claims made by the manufacturer for flow rate have not been tested and are not considered part of the approval listing.
Size:
M22 or M24
Marking:
Bubble stream on swivel connector
Installation Requirements:
R001 R010 R040
Model:
07.9870.0 Bubblestream M22 (no flow reg) 07.9880.0 Bubblestream M22 or M24 (no flow reg) 07.9881.0 Bubblestream M22 or M24 8.0 lpm 07.9882.0 Bubblestream M22 or M24 7.0 lpm 07.9883.0 Bubblestream M22 or M24 6.0 lpm 07.9884.0 Bubblestream M22 or M24 5.0 lpm
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Country
Germany
Phone
0049 7631 1880

View All Listings by this Company

Print This Approval


#2211706

Range of aerators with plastic bodies and filter screens. Maximum operating temperature 60°C

Section:
0435 Combination Tap Assemblies - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2211706
Expiry date:
30/11/2027
Note:
Open outlet use only.
Size:
Please refer to model
Marking:
Solex on body
Installation Requirements:
R001
Model:
T10110 - Ф18.1×10.1 T10128 - Ф20.85×14.26 T10129 - Ф20.85×14.26 T10344 - Ф20.85×15.44 T10345 - Ф20.85×15.44 T10346 - Ф20.85×15.44 T10347 - Ф20.85×15.44 T10350 - M24*1×15.94 T10351 - M24*1×15.94 T10352 - M24*1×15.94 T10353 - M24*1×15.94 T10356 - M24*1×12.5 T10616 - M14*1×11.5 T10617 - M14*1×11.5 T10613 - M14*1×11.5 T10430 - Ф15×13 T10431 - Ф15×13 T10423 - Ф18.1×10 T10420 - Ф18.1×10.2 T10424 - Ф18.1×10.2 T10359 - M24*1×9.5 T10361 - Ф20.85×21.6
Manufacturer:
Xiamen Solex High-Tech Industries Co., Ltd
Company Name
Xiamen Solex High-Tech Industries Co., Ltd
Address
No. 298 Yangguang Road West Xinyang Industrial Zone Haicang District Xiamen, Fujian
Country
China

View All Listings by this Company

Print This Approval


#2212707

Range of flow restrictors with plastic bodies and EPDM ‘O’-rings available in a variety of colours (see models). Maximum operating temperature 60°C.

Section:
0435 Combination Tap Assemblies - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2212707
Expiry date:
31/12/2027
Note:
Open outlet use only.
Size:
See Models.
Marking:
SOLEX on body
Installation Requirements:
R001
Model:
Ø14x5mm models: T40020 T10196 T10122 T10123 T10134 T10174 Ø12.7×5mm models: T10119 T10120 T10173 T10341 Ø15.3×5.7mm models: T10151 T10152 T10153 T40023 T10175 Ø15×5.5mm models: T10312 T10314 T10315 T10321
Manufacturer:
Xiamen Solex High-Tech Industries Co., Ltd
Company Name
Xiamen Solex High-Tech Industries Co., Ltd
Address
No. 298 Yangguang Road West Xinyang Industrial Zone Haicang District Xiamen, Fujian
Country
China

View All Listings by this Company

Print This Approval


#2302801

'PCR-E' range of flow regulators with chrome plated brass housing and NBR sealing gaskets. Maximum operating temperature 65°C.

Section:
0435 Combination Tap Assemblies - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2302801
Expiry date:
29/02/2028
Note:
Claims of flow rate are made by the manufacturer and not considered part of the listing.
Size:
½” BSP (M) x ½” BSP (F)
Marking:
Neoperl on body
Installation Requirements:
R001
Model:
A5.2209.0 PCR-E f G1/2 – m G1/2 1,0L. A5.2210.0 PCR-E f G1/2 – m G1/2 2,0L. A5.2211.0 PCR-E f G1/2 – m G1/2 3,0L. A5.2212.0m PCR-E f G1/2 – m G1/2 3,5L. A5.2213.0 PCR-E f G1/2 – m G1/2 4,0L. A5.2215.0 PCR-E f G1/2 – m G1/2 5,0L. A5.2217.0 PCR-E f G1/2 – m G1/2 6,0L. A5.2219.0 PCR-E f G1/2 – m G1/2 7,0L. A5.2221.0 PCR-E f G1/2 – m G1/2 8,0L. A5.2223.0 PCR-E f G1/2 – m G1/2 9,0L. A5.2225.0 PCR-E f G1/2 – m G1/2 10,0L. A5.2226.0 PCR-E f G1/2 – m G1/2 12,0L. A5.2227.0 PCR-E f G1/2 – m G1/2 14,0L. A5.2228.0 PCR-E f G1/2 – m G1/2 15,0L. A5.2230.0 PCR-E f G1/2 – m G1/2 18,0L. A5.2232.0 PCR-E f G1/2 – m G1/2 22,0L. A5.2345.0 PCR-E-LP f G1/2 – mG/12 7,6L EON. A5.2412.0 PCR- E m G1/2 -f G1/2 3,5L. A5.2415.0 PCR- E m G1/2 -f G1/2 5,0L. A5.2417.0 PCR- E m G1/2 -f G1/2 6,0L. A5.2421.0 PCR- E m G1/2 -f G1/2 8,0L. A5.2422.0 PCR- E m G1/2 -f G1/2 9,0L. A5.2425.0 PCR- E m G1/2 -f G1/2 10,0L. A5.2426.0 PCR- E m G1/2 -f G1/2 12,0L. A5.2427.0 PCR- E m G1/2 -f G1/2 14,0L. A5.2432.0 PCR- E m G1/2 -f G1/2 18,0L.
Manufacturer:
Neoperl GmbH & Neoperl UK Ltd
Company Name
Neoperl GmbH & Neoperl UK Ltd
Address
Neoperl GmbH: Klosterrunstrasse 9-11, Müllheim, D-79379, Germany. Neoperl UK Ltd: Enigma Park, Malvern, Worcestershire. WR14 1GH.

View All Listings by this Company

Print This Approval


#2212051

Range of aerators/flow regulators with chrome plated brass bodies, incorporating silicon seals. The products also incorporate either plastic (SB-STA ASQPQ 023A & SB-TA ASQPQ 011) or stainless-steel strainers (SB-ILFR). Open outlet use only.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
0435 Combination Tap Assemblies - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2212051
Expiry date:
31/12/2027
Size:
M22 (M) - SB-STA ASQPQ 023A, M22 (f) - SB-TA ASQPQ 011 and SB-ILFR.
Marking:
ShowerBob on body.
Installation Requirements:
R001 R040
Model:
AERATORS SB-STA ASQPQ 023A SB-TA ASQPQ 011 FLOW REGULATORS SB-ILFR
Factor:
BOB Products Limited
Company Name
BOB Products Limited
Address
Avalon House, High Street Chalford, Stroud, Gloucestershire
Postcode
GL6 8DS

View All Listings by this Company

Print This Approval


#2307034

Range of flow restrictors with plastic bodies and EPDM ‘O’-rings. LFB-FDN15, BFDN15SH & LFB-FDN15SH also incorporate a stainless-steel filter.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
0435 Combination Tap Assemblies - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2307034
Expiry date:
31/07/2028
Note:
Claims of flow rate are made by the manufacturer and not considered part of the listing.
Size:
See models
Marking:
Tecno Alfa logo on body
Installation Requirements:
R001
Model:
LF-B - 15.25mm LFBDN15 - 15MM LF-R - 16.25mm LFB-FDN15 - 15mm LF-T - 15mm BFDN15SH - 15mm LFBDN15SH - 15mm LFB-FDN15SH - 15mm
Manufacturer:
Tecno Alfa S.R.L
Company Name
Tecno Alfa S.R.L
Address
Via Rossini, 27 25057 Sale Marasino (BS) Italy
Phone
+39 030 986 587

View All Listings by this Company

Print This Approval


#2309301

Range of plastic aerators. Aerators which include ‘gpm max’ in the model name, incorporate a plastic flow regulator. Maximum operating temperature 60°C

Section:
0435 Combination Tap Assemblies - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2309301
Expiry date:
30/09/2028
Note:
Claims of flow rate made by the manufacture on flow rate are not part of this approval.
Size:
JR – 13/16-27, ¾-27 TT – 3/8, M16, M18 TJ – M19, M20 STD – M22, M24 TF – M28
Marking:
Model 43.2259.010 has LF PCA on body. All other models have Neoperl on body.
Installation Requirements:
R001
Model:
40.3015.000 PL-HC-STD-IT-PCA-DC 1.5gpm max 40.3016.000 PL-HC-STD-IT-PCA-DC 2.1gpm max 40.0E15.000 CC-SLC-STD-IT-PCA-DC 1.5GPM MAX 40.2194.000 PL-HC-STD-IT-C-lam 02.4051.000 FS STD IT 40.3030.000 PL-HC-STD-IT-V 40.3031.000 PL-HC-STD-IT-1.0 gpm max 40.3032.000 PL-HC-STD-IT-1.5 gpm max 40.3039.000 PL-HC-STD-IT-1.75 gpm max 40.3033.000 PL-HC-STD-IT-2.0 gpm max 40.3034.000 PL-HC-STD-IT-2.2 gpm max 40.3035.000 PL-HC-STD-IT-3.0 gpm max 40.3036.000 PL-HC-STD-IT-3.5 gpm max 40.3037.000 PL-HC-STD-IT-4.0 gpm max 40.3038.000 PL-HC-STD-IT-4.5 gpm max 40.2100.000 PL-HC-STD-IT-lam max 40.2007.000 PL-HC-STD-IT-D 40.2001.000 PL-HC-STD-IT-X 40.2003.000 PL-HC-STD-IT-A 40.2004.000 PL-HC-STD-IT-S 40.2005.000 PL-HC-STD-IT-B 40.2006.000 PL-HC-STD-IT-C 40.2008.000 PL-HC-STD-IT-G 40.2010.000 PL-HC-STD-IT-T 45.2015.000 PL-CS-STD-m M24x1-PCA-DC 1.5gpm max 45.2016.000 PL-CS-STD-m M24x1-PCA-DC 2.1gpm max 40.8115.010 SLIM AIR-CC-SLC-SSR-m M24x1-PCA-DC 1.5gpm max 40.8116.010 SLIM AIR-CC-SLC-SSR-m M24x1-PCA-DC 2.1gpm max 43.2259.010 CACHE-HC-TJ-m M18,5x1-PCA 0.5gpm 43.0053.000 CC-SLC-TJ-IT-PCA 2.2gpm max 43.9300.160 CACHE-FS-dripless-XT-TJ-, M18,5x1 40.0016.000 CC-SLC-STD-IT-PCA-NT 2.1gpm 40.2016.000 PL-HC-STD-IT-PCA-DC 2.1gpm max 40.4616.000 PL-DL-STD-IT-PCA-NT 2.1gpm 43.3216.450 CACHE-HC-CS-TJ-m M18,5x1-PCA-DC 2.1gpm max 40.6014.000 PL-HC-SSR-STD-IT-PCA-DC 1.2gpm max 40.6015.000 PL-HC-SSR-STD-IT-PCA-DC 1.5gpm max 40.6017.000 PL-HC-SSR-STD-IT-PCA-DC 1.75gpm max 40.6016.000 PL-HC-SSR-STD-IT-PCA-DC 2.1gpm max
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Country
Germany
Phone
0049 7631 1880

View All Listings by this Company

Print This Approval


#2312905

‘Waterblade Chrome’ tap outlet adaptor with a chromium plated plastic body. The product incorporates a plastic flow regulator and an integral stainless-steel strainer. Maximum operating temperature 60°C.

Section:
0435 Combination Tap Assemblies - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2312905
Expiry date:
31/12/2028
Note:
Open outlet use only. For use with M24 threaded and rebated collars.
Size:
Ø 20.8mm.
Marking:
'Waterblade' logo on body.
Installation Requirements:
R001 R040
Model:
Waterblade Chrome
Factor:
Waterblade Ltd
Company Name
Waterblade Ltd
Address
1 Crabtree Avenue Brighton BN1 8DE

View All Listings by this Company

Print This Approval


#240102069

Flow regulator incorporating a plastic body and EPDM O-ring. Maximum operating temperature 65.0°C.

Section:
0435 Combination Tap Assemblies - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
240102069
Expiry date:
31/01/2029
Size:
19.2mm OD
Marking:
Eltek on body.
Installation Requirements:
R001
Model:
10.0469.07
Manufacturer:
Eltek SpA
Company Name
Eltek SpA
Address
Strada Valenza 5/A 15033 - Casale Monferrato (AL) Italy
Phone
+39 0142 335511

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.