Mixing valve incorporating a brass body and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure10.0 bar. Maximum operating temperature 65°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) captive nut

Marking:

Presto on body

Installation Requirements:

R001 R008 R010

Expiry date:

31/01/2030

Model:

29424 MIXER G1/2

Product Images

Manufacturer:

Les Robinets Presto S.A

Company Name

Les Robinets Presto S.A

Address

4 Rue Lavoiser St. Georges De Didonne

Postcode

17110

Country

France

Phone

+33 546 053 452

View All Listings by this Company

Range of click type, pop-up wastes with metal bodies. Maximum operating temperature 60.0°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

241002704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1 ¼” BSP (M)

Marking:

Vinzia Fratelli logo, EN274, NF logo and date of manufacturer (DDD/YY)

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

04, 05, 06 family types. Code example: 00 AA 00 00 00 00 AA(A). Made up of the below. TYPE OF WASTE (2 numbers) 04 - Waste Simple-Rapid with waste drains H60 – 75 – 100 05 - Waste Simple-Rapid with waste drains 06 - Waste free flow with all waste drains CAP (2 letters) AA - TA209 AB - TA204 AC - CO032 + TA406 (in this case the first two numbers are”04 or 05”) or TA200 + TA413 in this case the first two numbers are”06”) BA – TA191 BC – TA193 (in this case the first two number as “05”) or TA198 (in this case the first two number are”06”) BD – TA197 BE – TA195 BH – TA201 CA - TA6 + TA217 / TA229 (in this case the first two numbers are”04 or 05”) or TA6 + PA001 in this case the first two numbers are”06”) WASTE DRAIN (2 numbers) 01 - PI096 02 - PI087 03 - PI088 07 - PI096/STP 08 - PI110/STP 09 - PI088/STP 11 - PI082 19 - PI084/1STP 20 - PI084/1 21 - PI082/STP 24 - PI083 25 - PI083/STP 50 - PI099 51 – PI209 52 – PI210 62 – PI207 85 – PI010 BASE (2 numbers) 01 - RA095 02 - RA096 07 - CO110 16 - RA014 17 - RA009 50 - RA094 51 - RA100 54 - RA002 VARIANTS (2 numbers) 00 - STANDARD COMPONENTS PACKAGING (2 numbers) 00 - STANDARD PACKAGING FINISH (2 or 3 letters) CR - CHROME PLATED (these two letters are always compiled) + None - ME235-AB or no mechanism (for free flow ones) CRG - ME238

Product Images

Approval Holder:

VINZIA Fratelli S.p.A.

Company Name

VINZIA Fratelli S.p.A.

Address

Via Borgomanero, 121 Briga Novarese (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 94847

General Email

gianfranco.calzoni@vinzia.com

View All Listings by this Company

Range of cold-water supply booster sets, incorporating a stainless-steel manifold system and between 1 and 3 pumps. The booster sets also incorporate spherical valves, non-return valves (not suitable for backflow protection), pressure switches/sensors and expansion vessels. Maximum working pressure: 16.0 Bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250702701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Inlet: 1” BSP, 1 ¼” BSP, 1 ½” BSP, 2” BSP, 2 ½” BSP, 3” BSP & DN100 (flanged). Outlet: 1” BSP, 1 ¼” BSP, 1 ½” BSP, 2” BSP, 2 ½” BSP, 3” BSP, DN80 (flanged) & DN100 (flanged).

Marking:

LOWARA, Model name and product information on adhesive label on control panel

Installation Requirements:

R001 R415

Expiry date:

31/07/2030

Model:

SMB / VV / YYYYYYYYYYYY / W / XX / ZZZ SMB - Series of booster - Variable speed Drive SM VV- Number of pumps installed: 10=1 PUMP 20=2 PUMPS 30=3 PUMPS YYYYYYYYYYY -Type of pumps installed: from 1SVE up to 22SVE from 1HME up to 15HME W - Main voltage supply 4=3*400Vac 2=1*230Vac 3=3*230Vac XX - Option CP=free voltage contacts ZZZ - Option PMA=pressure switch on suction

Manufacturer:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 4.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102721

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

ESPA, model & technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

ESPH XXS-XX\XX 1.XX:Rated flow(m³/h),range:2、3、4、8、10、12、16、20m³/h 2.XX:Impeller progession (1,2,3,4,5,6,7)*5 3.xx:Small Impeller (1) 4.End connection mode and size Rated flow(2、3m³ /h) :G1"XG1" Rated flow(4m³ /h) :G1¼"XG1" Rated flow(8、10、12m³ /h) :G1½"XG1½" Rated flow(16、20m³ /h) :G2"XG2"

Approval Holder:

ESPA

Company Name

ESPA

Address

PO Box 8156 Warehouse Q4 - 123 Sharjah Airport Free Zone, Sharjah

Country

United Arab Emirates

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

ESPA, model & technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

MULTI VSXXX-XX-(1/2/C/D/2C/2D/C-D) -(F/N) -E 1. XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2. XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2，On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4. F/N: the materials of wetted parts --N，material is SUS 316. --F，material is SUS 304. 5. E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150

Approval Holder:

ESPA

Company Name

ESPA

Address

PO Box 8156 Warehouse Q4 - 123 Sharjah Airport Free Zone, Sharjah

Country

United Arab Emirates

View All Listings by this Company