Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies incorporating brass bodies (various finishes) and quarter turn ceramic disc headworks with dome type or single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250708004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Coalbrook logo on body. (Brand of Davroc)

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/07/2030

Model:

XX 1008 YY, XX 1011 YY, XX 1018 YY, XX 1021 YY. XX denotes the trim and can be replaced with: DO – Domo DC Decca ZU – Zurich BA - Bank Middle numbers (e.g. 1008) – This is the numeric code allocated to the model and remains constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass BB = Brushed Brass

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

Country

United Kingdom

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of three-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members and metal backnuts. The spout outlets incorporate a plastic aerator. The headwork is connected to the spout via interconnecting stainless steel braided, EPDM lined flexible hoses. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

250708010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Manufacturers logo on the rear of spout.

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2030

Model:

XX1005YY, XX1006YY. XX denotes the trim and can be replaced with: DO – Domo DC – Decca & ZU - Zurich Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal BB = Brushed Brass.

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

Country

United Kingdom

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of Grohe ‘Atrio’ wall mounted spout outlets (brass bodies - various finishes), the outlet incorporates a plastic aerator. Maximum operating temperature: 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

250102048

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only

Size:

½” BSP (M)

Marking:

Grohe on body.

Installation Requirements:

R001 R040

Expiry date:

31/01/2030

Model:

13.139.xxx 13.487.xxx Where xxx / xx3 denotes finish, can be replaced by: 000 / 003 – Chrome DC0 / DC3 – Supersteel DA0 / DA3 – Warm sunset AL0 / AL3 – Brushed hard graphite GL0 / GL3 – cool sunrise

Product Images

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

View All Listings by this Company

Expansion vessel with a stainless-steel body. Maximum working pressure 15.0 bar. Maximum operating temperature 100°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

MB (denotes midbrass, a brand of Navigator), date of manufacture (MM/YY) and other technical information on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

HCSA-D Shock Arrestor

Product Images

Approval Holder:

Navigator MSL Ltd.

Company Name

Navigator MSL Ltd.

Address

Mill Road, Sharnbrook, Beds.

Postcode

MK44 1NP

Phone

01234 781234

View All Listings by this Company

The products incorporate two check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3), a pressure reducing valve adjustable between 1.0 bar and 3.0 bar (but pre-set at 2.5 bar for 523.815 model and 1.4 bar for the 523.816 model). The product incorporates a push type valve which allows water to flow when operated until the required pressure is achieved. There is a drain port below the push valve piston chamber. Compression connections are for use with copper pipe (manufactured to EN 1057). Maximum supply pressure 10.0 bar. Maximum operating temperature 80°C.

Section:

1015 Filling Loop

WRAS Approval Number:

250104713

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain port must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

15mm compression.

Marking:

Officine Rigamonti spa logo, (the letters ‘OR’ within an oval), flow arrow, CR mark, size and pressure cast on body. Date of manufacture (MMYY) laser etched on body.

Installation Requirements:

R001 R511

Expiry date:

31/01/2030

Model:

523.815, 523.816.

Product Images

Approval Holder:

Officine Rigamonti spa

Company Name

Officine Rigamonti spa

Address

Località Molino Rastelli, 20 13018 Valduggia (VC)

Country

Italy

View All Listings by this Company

Manufacturer:

Officine Rigamonti Spa

Company Name

Officine Rigamonti Spa

Address

Via Circonvallazione 9, Officine Rigamonti spa 13018 Valduggia (VC)

Country

Italy

Phone

+39 0163 48 165 Fax: +39 0163347254

View All Listings by this Company