Directory Search Results

Print List

#241255046

SI-55678 (shore hardness 50), SI-65678 (SH 60), SI-75678 (SH 70) & SI-85678 (SH 80) natural ‘O’ rings. SI-52109 (shore hardness 50), SI-62109 (SH 60), SI-72109(SH 70), SI-82109 (SH80) red coloured ‘O’ rings. SI-51501 (shore hardness 50), SI-61501 (SH 60), SI-71501(SH 70) & SI-81501(SH 80) blue coloured ‘O’ rings. Natural (appears white coloured), red or blue coloured, compression moulded silicone rubber ‘O’ rings. Shore hardness between 50 shore A and 80 shore A. Tested in-radii sizes between 0.5mm & 2.5mm. For use with water up to 85°C.

Section:
5410 Rubbers
Section Subtitle:
Silicone - components.
WRAS Approval Number:
241255046
Expiry date:
31/12/2029

Approval Holder:
Yaw-Yew Rubber Co. Ltd.
Company Name
Yaw-Yew Rubber Co. Ltd.
Address
No. 49-38, Fanshe St. Fuxing Township, Changhua County
Country
Taiwan
Phone
+886-4-7783390

View All Listings by this Company

Print This Approval


#241155059

'Silicone-01 Heater Seal Ring'. White coloured, compression moulded Silicone ring. Shore hardness 70. Tested in-radius size 3.4mm. For use with water up to 85°C.

Section:
5410 Rubbers
Section Subtitle:
Silicone - components.
WRAS Approval Number:
241155059
Expiry date:
30/11/2029

Approval Holder:
Wuhu Midea Kitchen and Bathroom Manufacturing Co., Ltd.
Company Name
Wuhu Midea Kitchen and Bathroom Manufacturing Co., Ltd.
Address
East Road Wanchun, East Area Economic & Technological Development Area Wuhu City P.R.
Country
China

View All Listings by this Company

Print This Approval


#241155060

'Silicone-02 Sealing Gasket'. Natural (appears white), compression moulded Silicone gasket. Shore hardness 70. Tested in-radius size 1.25mm. For use with water up to 85°C.

Section:
5410 Rubbers
Section Subtitle:
Silicone - components.
WRAS Approval Number:
241155060
Expiry date:
30/11/2029

Approval Holder:
Wuhu Midea Kitchen and Bathroom Manufacturing Co., Ltd.
Company Name
Wuhu Midea Kitchen and Bathroom Manufacturing Co., Ltd.
Address
East Road Wanchun, East Area Economic & Technological Development Area Wuhu City P.R.
Country
China

View All Listings by this Company

Print This Approval


#241002097

Range of stop valves with plastic bodies. The valves incorporate a built in solenoid valve which is operated by a switch located on the valve or by a remote control. The leak detector supplied is not connected to any water pipe, is independent of the valve and is intended to be installed in the area at risk of leakage. It is intended to detect leakage and sends an electrical signal to close the valve. For use with copper pipe (manufactured to BS EN1057), PEX pipe (manufactured to BS7291-3) and PB pipe (manufactured to BS7291 -2). Maximum working pressure 10.0 bar. Cold water use only

Section:
2336 Valves
Section Subtitle:
Stop - plastic.
WRAS Approval Number:
241002097
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Please note that claims of leak detection have not been verified by WRAS.
Size:
15mm pushfit & 22mm pushfit
Marking:
TLC (Twistloc logo – manufacturer’s brand) on body. TLC and size on inlet connection.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
Flomasta Stop Valve, Flomasta Stop Valve with Leak Detector. Flomasta Stop Valve 22mm & Flomasta Stop Valve 22mm with Leak Detector added July 2025.

Approval Holder:
Kingfisher Plc.
Company Name
Kingfisher Plc.
Address
1 Paddington Square, London
Postcode
W2 1GG

View All Listings by this Company
Manufacturer:
SNC Corporation
Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company

Print This Approval


#2311102

Range of wall mounted single hole, single outlet, fixed, electronically controlled tap assemblies (chrome plated brass bodies). Flow is controlled via an infra-red activated solenoid valve. Maximum working pressure 8.0 Bar Maximum operating temperature 45.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2311102
Size:
1/2" BSP (M)
Marking:
MP on tap base
Installation Requirements:
R001 R007 R010 R040
Expiry date:
30/11/2028
Model:
MP102E

Approval Holder:
Modular Products Ltd
Company Name
Modular Products Ltd
Address
Unit 1 Modular Business Park Norton Road Stevenage
Postcode
SG1 2FZ
Country
United Kingdom
Phone
07852550494
General Email
steven.lai@modular-products.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1633 of 2035

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.