CITY PLUMBING SUPPLIES HOLDINGS Approvals


#1906149

Two hole, single outlet (fixed) combination tap assembly (chrome plated brass) incorporating a quarter turn ceramic disc headwork with a single lever operating members (chrome plated zinc) and manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The products is supplied with metal back nuts, shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
1906149
Expiry date:
30/06/2024
Size:
¾” BSP (M)
Marking:
IFLO ON TAP BODY
Installation Requirements:
R001 R006 R020
Model:
219797 IFLO IMIRI BATH SHOWER MIXER COMBINATION TAP ASSEMBLY
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#1906150

Range of two-hole, single outlet (fixed) combination tap assemblies (chrome plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1906150
Expiry date:
30/06/2024
Size:
¾” BSP (M)
Marking:
IFLO ON TAP BODY
Installation Requirements:
R001 R006 R010
Model:
413866 IFLO IMIRI BATH FILLER & 702975 IFLO ASTRIA BATH FILLER COMBINATION TAP ASSEMBLIES
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#1906151

Range of pillar taps (chrome plated brass) incorporating a quarter turn ceramic disc headworks with a single lever operating member controlling the flow. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 Bar, Maximum operating temperature 70°C

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
1906151
Expiry date:
30/06/2024
Size:
½” BSP (M) or ¾” BSP (M)
Marking:
IFLO ON REAR OF TAP BODY
Installation Requirements:
R001 R005
Model:
604585 IFLO CP BARCELONA BASIN & 604586 IFLO CP BARCELONA BATH PILLAR TAPS
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2001130

Range of deck mounted, single hole, single outlet (fixed) pillar taps, incorporating a non-rising spindle headwork with either cross top (Models 213139 & 604583) or dome type (Models 604570 & 213139) operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2001130
Expiry date:
31/01/2025
Size:
½” BSP male
Marking:
CPS ON TAP BODY
Installation Requirements:
R001 R006
Model:
213139 TRADE BASE SINK, 213170 TRADE CROSS HEAD, 604570 BASE & 604583 CROSS HEAD SINK PILLAR TAPS
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#1906152

Range of pillar taps (chrome plated brass) incorporating a quarter turn ceramic disc headwork with single lever operating member. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
1906152
Expiry date:
30/06/2024
Size:
½” BSP (M)
Marking:
IFLO ON TAP BODY
Installation Requirements:
R001 R006
Model:
295349 IFLO ASTRIA BASIN PILLAR TAPS
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2003078

Range of single hole, double outlet (swivel) combination tap assemblies (chromium plated brass) with a non-rising spindle headwork operated by dome operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
0490 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, double outlet, swivel.
WRAS Approval Number:
2003078
Expiry date:
31/03/2025
Size:
See model
Marking:
CPS ON BASE OF TAP
Installation Requirements:
R001 R006 R010
Model:
604571 BASE MONO SINK MIXER COMBINATION TAP ASSEMBLIES - 15mm copper tails or stainless-steel EPDM lined flexible hose with a ½” BSP captive nut end connections.
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2003079

Range of two-hole, single outlet (fixed) combination tap assemblies. Incorporating non-rising spindle headworks, cross top operating members and manually operated diverter to shower outlet using a single lever operating member. The product is also supplied with a shower hose, handset and metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2003079
Expiry date:
31/03/2025
Size:
¾” BSP (M)
Marking:
IFLO rear of tap body.
Installation Requirements:
R001 R005 R020
Model:
604606 IFLO CP TATTON BATH SHOWER MIXER COMBINATION TAP ASSEMBLIES
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2003816

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts and a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2003816
Expiry date:
31/03/2025
Size:
¾” BSP (M)
Marking:
IFLO on body.
Installation Requirements:
R001 R006 R020
Model:
724785 IFLO TORNO BATH SHOWER MIXER COMBINATION TAP ASSEMBLIES
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2002803

Self closing basin tap (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar, Maximum operating temperature 85°C.

Section:
1820 Taps
Section Subtitle:
Self closing, metal.
WRAS Approval Number:
2002803
Expiry date:
28/02/2025
Size:
½” BSP (M)
Marking:
CPS ON TAP BODY
Installation Requirements:
R001 R006
Model:
604610 PUSH ON COMBINATION TAP ASSEMBLIES
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2003818

Range of wall mounted, concealed, thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork which controls the flow using various operating members. Temperature is controlled independently via a thermostatic cartridge also using various operating members. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2003818
Expiry date:
31/03/2025
Note:
This approval does not include a shower hose and handset
Size:
15mm compression
Marking:
IFLO ON OPERATING MEMBER
Installation Requirements:
R001 R010 R040
Model:
312073 IFLO HOLTON & 506148 IFLO ABINGDON THERMOSTATIC SHOWER BLENDING VALVES
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#1907076

Range of high neck basin pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener & the products are supplied with metal back nuts. Maximum working pressure 10.0 bar Maximum operating temperature 70°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
1907076
Expiry date:
31/07/2024
Size:
½” BSP (M)
Marking:
CPS ON TAP BASE
Installation Requirements:
R001 R006
Model:
278584 LEVER SINK PILLAR TAPS
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#1905093

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and an optional flow straightener. The inlet hoses incorporate an EPDM washer on the inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905093
Expiry date:
31/05/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut connections.
Marking:
CPS ON TAP BASE
Installation Requirements:
R001 R006 R010
Model:
158714 LANGDALE MONOBLOC SINK MIXER COMBINATION TAP ASSEMBLIES
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2104064

Range of wall mounted hose union taps (brass, chrome plated brass or DZR brass body) incorporating a non-rising spindle headwork with a butterfly handle operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1780 Taps
Section Subtitle:
Hose union, metal. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building. Where in existing house installations a hosepipe is to be used from an existing hose union tap located outside a house and which is not provided with backflow protection, either: a. The existing hose union tap should be provided with a double check valve (Type EC or ED) located inside the building; or b. The tap should be replaced with a hose union tap that incorporates a double check valve (type HUK1); or c. A hose union backflow prevention (Type HA) or a double check valve should be continuously fitted to the outlet of the tap; or d. Is legally installed in any premises.
WRAS Approval Number:
2104064
Expiry date:
30/04/2026
Size:
¾” BSP male inlet x 19mmØ hose outlet
Marking:
CPS and size on body.
Installation Requirements:
R001 R040
Model:
961136
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2004071

Single hole, single outlet, fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004071
Expiry date:
30/04/2025
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
IFLO on tap body.
Installation Requirements:
R001 R006 R010
Model:
484028 IFLO TALL BASIN MIXER COMBINATION TAP ASSEMBLIES
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2012371

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Model 805777 incorporate a non-rising spindle headwork with dome type operating members. Model 805783 incorporate a quarter turn ceramic disc headwork with single lever operating members. The fitting incorporates a manual diverter to the shower outlet The spout outlet incorporates a plastic flow straightener and the products are supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2012371
Expiry date:
31/12/2025
Size:
¾” BSP (M)
Marking:
CPS ON TAP BODY
Installation Requirements:
R001 R020
Model:
805777 bath shower mixer & 805783 lever bath shower mixer combination tap assemblies
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2105809

Range of pillar taps with brass bodies (chrome plated), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener or aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2105809
Expiry date:
31/05/2026
Size:
See model
Marking:
CPS ON TAP BODY
Installation Requirements:
R001 R005
Model:
½” BSP (M) 805778 ¾” BSP (M) 805781
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2105810

Range of pillar taps with brass bodies (various finishes), incorporating quarter turn ceramic disc headwork with single lever operating members. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating pressure 85°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2105810
Expiry date:
31/05/2026
Size:
See model
Marking:
iflo on tap body
Installation Requirements:
R001 R006
Model:
½” BSP (M) 724782 iflo torno basin ¾” BSP (M) 724783 iflo torno bath pillar taps
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2001152

Wall mounted, single hole, single outlet (fixed) bib tap (chromium plated brass), incorporating a non-rising spindle with a cross top operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum working temperature 70°C.

Section:
1750 Taps
Section Subtitle:
Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.
WRAS Approval Number:
2001152
Expiry date:
31/01/2025
Size:
½” BSP (M)
Marking:
CPS on tap body.
Installation Requirements:
R001 R040
Model:
604584 BIB TAP
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2109801

Range of two hole, single outlet, (fixed) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2109801
Expiry date:
30/09/2026
Size:
¾” BSP (M)
Marking:
IFLO on body.
Installation Requirements:
R001 R006 R010
Model:
724740 Iflo Garda bath filler & 724769 Iflo Reno bath filler COMBINATION TAP ASSEMBLIES
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2108806

Range of two hole, single outlet, (fixed) combination tap assemblies (chromium plated brass), With a quarter turn ceramic disc headwork with single lever operating members. Models M4306, M4306E & M4306F incorporate a non rising spindle headwork with dome type operating members. Model M4306G incorporate a non rising spindle headwork with cross top operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. . Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2108806
Expiry date:
31/08/2026
Size:
¾” BSP (M)
Marking:
IFLO on body.
Installation Requirements:
R001 R009 R010
Model:
604588 Iflo CP Barcelona bath filler COMBINATION TAP ASSEMBLIES
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2108807

Range of pillar taps with brass bodies (various finishes) incorporating non-rising spindle headworks using either dome type or cross top operating members. Spout outlets incorporate plastic flow straighteners. The products are also supplied with metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2108807
Expiry date:
31/08/2026
Size:
See model
Marking:
805773 & 805774 CPS ON BODY 604605 & 604604 IFLO ON BODY
Installation Requirements:
R001 R006
Model:
½” BSP (M) 805774 standard base basin tap (pair) 604604 Iflo CP Tatton basin taps pair ¾” BSP (M) 805773 standard base bath tap (pair) 604605 Iflo CP Tatton bath taps pair
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


#2205910

Wall mounted, thermostatic shower valve with chromium plated brass body. Flow is controlled by a quarter turn ceramic disc headwork with a single lever operating member. Temperature is controlled independently by a thermostatic cartridge with a dome type operating member that incorporates a manual override button. The inlets incorporate stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with shower hose, handset, and riser rail. Maximum working pressure 10.0 Bar Maximum operating temperature 70°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2205910
Expiry date:
31/05/2027
Size:
15mm Compression
Marking:
Iflo on body (Brand of City Plumbing Supplies Holdings Ltd)
Installation Requirements:
R001 R010 R040
Model:
483838
Factor:
CITY PLUMBING SUPPLIES HOLDINGS
Company Name
CITY PLUMBING SUPPLIES HOLDINGS
Postcode
NN6 7SL

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.