Reliance Worldwide Corporation (UK) Limited Approvals


#1903340

Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets elbows incorporate single check valve cartridges verified by test (suitable for backflow protection against Fluid Category 2) stainless-steel strainers and isolating valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1903340
Expiry date:
31/03/2024
Size:
1” BSPF.
Marking:
Reliance water controls, Euromixer, model, CR, flow arrow on operating member
Installation Requirements:
R001 R040
Model:
HEAT630100 Euromixer 630. HEAT640100 Euromixer 640.
Factor:
Reliance Worldwide Corporation (UK) Limited
Company Name
Reliance Worldwide Corporation (UK) Limited
Address
Horton Road, West Drayton, Middlesex
Postcode
UB7 8JL

View All Listings by this Company

Print This Approval


#1905076

Range of stop valves with white plastic bodies, plastic seat and EPDM ‘O’ rings. For use with LLDPE piping. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2336 Valves
Section Subtitle:
Stop - plastic.
WRAS Approval Number:
1905076
Expiry date:
31/05/2024
Size:
See models
Marking:
JG logo (brand of Reliance Worldwide Corporation (UK) Ltd.) on operating member and body
Installation Requirements:
R001 R008
Model:
PPSV010822W – ¼” pushfit x ¼” npft PPSV010822W-R – ¼” pushfit x ¼” npft PPSV040808W – ¼” pushfit x ¼” pushfit PPSV500822W – ¼” pushfit x ¼” npft PPMSV040606W – 6mm pushfit x 6mm pushfit Model Added June 2019: PPSV011223W – 3/8” pushfit x 3/8” nptf PPSV451223W – 3/8” pushfit x 3/8” nptf PPSV041212W – 3/8” x 3/8” pushfit PPMSV040808W – 8mm – 8mm pushfit “Y” suffix = Yellow Collet “p” suffix = added to above part number when packaged singularly Models added October 2022: PPMSV041010W – 10mm push-fit x 10mm push-fit PPMSV041212W – 12mm push-fit x 12mm push-fit PPSV501222W – 3/8” push-fit x ¼” NPT (F) PPSV501222W-Y – 3/8” push-fit x ¼” NPT (F)
Factor:
Reliance Worldwide Corporation (UK) Limited
Company Name
Reliance Worldwide Corporation (UK) Limited
Address
Horton Road, West Drayton, Middlesex
Postcode
UB7 8JL

View All Listings by this Company

Print This Approval


#1912349

Range pressure relief valves incorporating DZR brass bodies and EPDM rubber washers. For pressures these are set at please consult the model section. The valves incorporate a manually operated rotational easing gear. Maximum operating temperature of 99°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
1912349
Expiry date:
31/12/2024
Size:
See model
Marking:
RWC on cap
Installation Requirements:
R001
Model:
PREL107015: ½” BSP (M) x ½” BSP (F) - set @ 6.0 bar. PREL107020: ½” BSP (M) x 15mm - set @ 3.5 bar.
Factor:
Reliance Worldwide Corporation (UK) Limited
Company Name
Reliance Worldwide Corporation (UK) Limited
Address
Horton Road, West Drayton, Middlesex
Postcode
UB7 8JL

View All Listings by this Company

Print This Approval


#2003808

Floreg range of in-line lever operated spherical valve with a DZR brass body (brushed chrome plated) and ball. The product incorporates a stainless-steel mesh strainer and a flow regulator. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2003808
Expiry date:
31/03/2025
Size:
15mm compression
Marking:
RWC logo, direction flow arrow, CR mark, valve size on body. RWC, 864-2, 15mm, B on cap.
Installation Requirements:
R001
Model:
SERV970000. SERV970001. SERV970002. SERV970003. SERV970004. SERV970005.
Factor:
Reliance Worldwide Corporation (UK) Limited
Company Name
Reliance Worldwide Corporation (UK) Limited
Address
Horton Road, West Drayton, Middlesex
Postcode
UB7 8JL

View All Listings by this Company

Print This Approval


#2001362

Angled tundish having a plastic body. The tundish complies with the requirements of air gap to drain. Maximum operating temperature 99°C.

Section:
0046 Backflow Prevention Devices
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2001362
Expiry date:
31/01/2025
Size:
15mm x 22mm compression
Marking:
RWC on body
Installation Requirements:
R001
Model:
TUND219021
Manufacturer:
Reliance Worldwide Corporation (UK) Limited
Company Name
Reliance Worldwide Corporation (UK) Limited
Address
Horton Road, West Drayton, Middlesex
Postcode
UB7 8JL

View All Listings by this Company

Print This Approval


#2003377

TPR range of combined temperature relief valves having gunmetal bodies. The valve incorporates a manually operated rotational easing gear. The valves are pre-set at 4.5, 6.0, 7.0 or 10.0 bar depending on model. Maximum operating temperature 95˚C.

Section:
2030 Valves
Section Subtitle:
Combined thermal and pressure relief.
WRAS Approval Number:
2003377
Expiry date:
31/03/2025
Size:
See model.
Marking:
Reliance Water Control, pressure and temperature on cap. Flow arrow, DN and manufacturing date (DWWYY) on body. Models added July 2020: Reliance Water Controls, range name (TPR 15 or 22), pressure and 90-95°C on disc indice. Size, flow arrow and DR on body.
Installation Requirements:
R001
Model:
TPR15 range: PTEM550853: 10.0 bar – ½” BSP (M). PTEM550856: 4.5 bar – ½” BSP (M). PTEM550955: 10.0 bar – ½” BSP (M). TPR22 range: PTEM575200: 4.5 bar – ¾” BSP (M). PTEM575210: 10.0 bar – ¾” BSP (M). Models added July 2020: TPR15 range: PTEM550852: 7.0 bar – ½” BSP (M) x 15mm compression. PTEM550854: 7.0 bar – ½” BSP (M) x 15mm compression. PTEM550857: 6.0 bar – ½” BSP (M) x 15mm compression. PTEM550870: 7.0 bar – ½” BSP (M) x 15mm compression. PTEM550951: 7.0 bar – ½” BSP (M) x 15mm compression. PTEM550953: 7.0 bar – 15mm compression x 15mm compression. PTEM550954: 7.0 bar – 15mm compression x 15mm compression. PTEM550956: 6.0 bar – ½” BSP (M) x 15mm compression. TPR22 range: PTEM575205: 7.0 bar – ¾” BSP (M) x 22mm compression. PTEM575870: 7.0 bar – ¾” BSP (M) x 22mm compression. PTEM575250: 7.0 bar – ¾” BSP (M) x 22mm compression.
Factor:
Reliance Worldwide Corporation (UK) Limited
Company Name
Reliance Worldwide Corporation (UK) Limited
Address
Horton Road, West Drayton, Middlesex
Postcode
UB7 8JL

View All Listings by this Company

Print This Approval


#2004338

Range of spherical valves with brass bodies (chrome plated), brass ball, PTFE seats and EPDM ‘O’-rings. For use with Polybutylene pipe (manufactured to BS7291 part 2) and PEX pipe (manufactured to BS7291 part 3) with a maximum working pressure of 10.0 bar. Cold water use only and from October 2020 with a maximum operating temperature of 85°C. For use with copper pipe (manufactured to EN 1057) with a maximum working pressure of 10.0 bar. Maximum operating temperature of 85°C.

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2004338
Expiry date:
30/04/2025
Size:
See model.
Marking:
JG (brand of RWC), size and PN on body. Speedfit, WRAS and JG on lever. From June 2020 the product will be marked with: 'R' (logo of Reliance Valves - brand of Reliance Worldwide Corporation (UK) Limited), size & PN on body. 'R' and Reliance Valves on operating member.
Installation Requirements:
R001
Model:
BVAL400200: 15mm pushfit BVAL400210: 22mm pushfit
Factor:
Reliance Worldwide Corporation (UK) Limited
Company Name
Reliance Worldwide Corporation (UK) Limited
Address
Horton Road, West Drayton, Middlesex
Postcode
UB7 8JL

View All Listings by this Company

Print This Approval


#2005353

Combined pressure and temperature relief valves with DZR brass bodies, stainless steel springs, silicone diaphragm and PTFE washers. The valves incorporate lever easing gear. The valves are factory pre-set at 6.0 bar (PTEM510001), 7.0 bar (PTEM510002) or 10.0 bar (PTEM510003). Maximum operating temperature 95°C.

Section:
2030 Valves
Section Subtitle:
Combined thermal and pressure relief.
WRAS Approval Number:
2005353
Expiry date:
31/05/2025
Size:
½” BSP (M) inlet x 15mm compression outlet
Marking:
RWC logo, 10kw, pressure bar, 90-95°C, TPR15L, DR, flow arrow and 15DN on body. Manufacturing date stamp (YYWWD) on lever.
Installation Requirements:
R001
Model:
PTEM510001. PTEM510002. PTEM510003.
Factor:
Reliance Worldwide Corporation (UK) Limited
Company Name
Reliance Worldwide Corporation (UK) Limited
Address
Horton Road, West Drayton, Middlesex
Postcode
UB7 8JL

View All Listings by this Company
Manufacturer:
Cash Acme (Reliance Wordwide Corporation USA)
Company Name
Cash Acme (Reliance Wordwide Corporation USA)
Address
2400 Trade Drive 35055 Cullman

View All Listings by this Company

Print This Approval


#2005362

Range of pre-set pressure relief valves incorporating DZR brass bodies and an EPDM diaphragm, (for pre-set pressures see model). The valve is fitted with hand operated rotating easing gear. Maximum working pressure is the same as the pre-set pressure (see model). Maximum operating temperature 85°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
2005362
Expiry date:
31/05/2025
Size:
See model.
Marking:
All models: Reliance water control and pressure rating on cap. Date of production (A-Z = year, then A-Z, 1-9, selective lower-case letters a-r, Ω, Ø, &, Ǝ, Ⅎ, ∀ and ⊥ for week, e.g. XA, where X = 2020 and A = week 1) on cap rim. SYR, DR and flow arrow on body. Additional marking to the above: PREL102014, PREL102008, PREL102001 and PREL102004 models: 016 on body. PREL102009, PREL102110, PREL102111, PREL102003, PREL102005, PREL102105 & PREL102044 models: 047 on body. PREL102048, PREL102118, PREL102018, PREL102024, PREL102020, PREL102049, PREL102027, PREL102050 models are also marked with DN size.
Installation Requirements:
R001
Model:
PREL102014: ½” BSP (F) x ½” BSP (F) - 3.5 Bar. PREL102008: ½” BSP (F) x ½” BSP (F) - 5.0 Bar. PREL102001: ½” BSP (F) x ½” BSP (F) - 6.0 Bar. PREL102004: ½” BSP (F) x ½” BSP (F) - 8.0 Bar. PREL102009: ½” BSP (M) x 15mm compression - 3.5 Bar. PREL102110: ½” BSP (M) x 15mm compression - 4.0 Bar. PREL102111: ½” BSP (M) x 15mm compression - 4.0 Bar. PREL102003: ½” BSP (M) x 15mm compression - 5.0 Bar. PREL102005: ½” BSP (M) x 15mm compression - 6.0 Bar. PREL102105: ½” BSP (M) x 15mm compression - 6.0 Bar. PREL102044: ½” BSP (M) x 15mm compression - 8.0 Bar.
PREL102040: ½” MBSP x ½” FBSP 3.5 Bar. PREL102041: ½” MBSP x ½” FBSP 5.0 Bar. PREL102042: ½” MBSP x ½” FBSP 6.0 Bar. PREL102043: ½” MBSP x ½” FBSP 8.0 Bar. PREL102048: ¾” MBSP x ¾” FBSP 3.5 Bar. PREL102118: ¾” MBSP x ¾” FBSP 5.0 Bar. PREL102018: ¾” MBSP x ¾” FBSP 6.0 Bar. PREL102024: ¾” MBSP x ¾” FBSP 8.0 Bar. PREL102020: ¾” MBSP x 22mm 3.5 Bar. PREL102049: ¾” MBSP x 22mm 5.0 Bar. PREL102027: ¾” MBSP x 22mm 6.0 Bar. PREL102050: ¾” MBSP x 22mm 8.0 Bar. PREL102045: ¾” FBSP x ¾” FBSP 3.5 Bar. PREL102023: ¾” FBSP x ¾” FBSP 4.0 Bar. PREL102046: ¾” FBSP x ¾” FBSP 5.0 Bar. PREL102047: ¾” FBSP x ¾” FBSP 8.0 Bar.
Factor:
Reliance Worldwide Corporation (UK) Limited
Company Name
Reliance Worldwide Corporation (UK) Limited
Address
Horton Road, West Drayton, Middlesex
Postcode
UB7 8JL

View All Listings by this Company

Print This Approval


#2005364

Combined pressure and temperature relief valves with DZR brass bodies, stainless steel springs, nylon coated probe, EPDM diaphragm and silicone seat disc. The valves incorporate lever easing gear. The valves have a factory pre-set pressure of 7.0 or 10.0 bar (see model). Maximum operating temperature 85°C.

Section:
2030 Valves
Section Subtitle:
Combined thermal and pressure relief.
WRAS Approval Number:
2005364
Expiry date:
31/05/2025
Size:
See model.
Marking:
Reliance logo, model, size, probe length, set pressure, temperature, rated discharge, DR and manufacturing stamp (YYWW) on tag attached under leaving easing gear. DR and flow arrow on body.
Installation Requirements:
R001
Model:
Pre-set @ 7.0 bar: PTEM100050: TPR28-FVMX, 204mm probe - 1” BSP (M) x 28mm compression, PTEM600001: FVMX, 112mm probe - ¾” BSP (M) x ¾” BSP (F), PTEM600002: FVMX, 120mm probe - 1” BSP (M) x 1” BSP (F), PTEM600003: FVMX, 100mm probe - 1¼” BSP (M) x 1” BSP (F), PTEM600004: FVMX, 80mm probe - 1½” BSP (M) x 1½” BSP (F), PTEM600005: FVMX, 65mm probe - 2” BSP (M) x 2” BSP (F). Pre-set @ 10.0 bar: PTEM100060: TPR28-FVMX, 204mm probe - 1” BSP (M) x 28mm compression, PTEM600006: FVMX, 100mm probe - 1¼” BSP (M) x 1” BSP (F).
Factor:
Reliance Worldwide Corporation (UK) Limited
Company Name
Reliance Worldwide Corporation (UK) Limited
Address
Horton Road, West Drayton, Middlesex
Postcode
UB7 8JL

View All Listings by this Company

Print This Approval


#2005367

Combined pressure and temperature relief valves with DZR brass bodies, stainless steel springs, nylon coated probe, EPDM diaphragm and silicone seat disc. The valves incorporate lever easing gear. The valves have a factory pre-set pressure of 7.0 or 10.0 bar (see model). Maximum operating temperature 85°C.

Section:
2030 Valves
Section Subtitle:
Combined thermal and pressure relief.
WRAS Approval Number:
2005367
Expiry date:
31/05/2025
Size:
See model.
Marking:
Bailey, model, size, probe length, set pressure, temperature, rated discharge, DR and manufacturing stamp (YYWW) on tag attached under leaving easing gear. DR and flow arrow on body.
Installation Requirements:
R001
Model:
Pre-set @ 7.0 bar: 20494-0145: FVMX, 112mm probe - ¾” BSP (M) x ¾” BSP (F), 20501-0049, 20501-0087 & 20501-0145: FVMX, 120mm probe - 1” BSP (M) x 1” BSP (F), 20505-0087 & 20505-0145: FVMX, 100mm probe - 1¼” BSP (M) x 1” BSP (F), 20510-0145 & 20510-0049: FVMX, 80mm probe - 1½” BSP (M) x 1½” BSP (F), 20515-0145: FVMX, 65mm probe - 2” BSP (M) x 2” BSP (F).
Factor:
Reliance Worldwide Corporation (UK) Limited
Company Name
Reliance Worldwide Corporation (UK) Limited
Address
Horton Road, West Drayton, Middlesex
Postcode
UB7 8JL

View All Listings by this Company

Print This Approval


#2007389

Range of pressure relief valves incorporating brass bodies and EPDM rubber washers. The valves incorporate a manually operated rotational easing gear. For maximum working pressure please refer to model. Maximum operating temperature 99°C.

Section:
2210 Valves
Section Subtitle:
Pressure relief.
WRAS Approval Number:
2007389
Expiry date:
31/07/2025
Note:
For closed circuit use only.
Size:
See model
Marking:
SIZE & flow arrow on body. RWC, Date of manufacture (DD/MM/YYYY) & product information on cap.
Installation Requirements:
R001 R200
Model:
PREL107010: ½” BSP (F) x ½ BSP (F) – 6.0 bar.
Factor:
Reliance Worldwide Corporation (UK) Limited
Company Name
Reliance Worldwide Corporation (UK) Limited
Address
Horton Road, West Drayton, Middlesex
Postcode
UB7 8JL

View All Listings by this Company

Print This Approval


#2205029

Range of automatic air venting valves with DZR brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2205029
Expiry date:
31/05/2027
Marking:
RWC and DR mark on body.
Installation Requirements:
R001
Model:
ADMT503004: 15mm compression. ADMT503005: 22mm compression. ADMT503010: ¾” BSP (M).
Factor:
Reliance Worldwide Corporation (UK) Limited
Company Name
Reliance Worldwide Corporation (UK) Limited
Address
Horton Road, West Drayton, Middlesex
Postcode
UB7 8JL

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.