WOLSELEY Approvals


#1909907

Exposed bar type thermostatic blending valve (chromium plated brass) incorporating a two way ceramic disc diverting the flow between two shower outlets, temperature is controlled independently by a thermostatic cartridge with a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied with a fixed over head shower, hose and headset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1909907
Expiry date:
30/09/2024
Size:
½” X ¾” off set unions
Marking:
WRAS SOLEX on rear of body
Installation Requirements:
R001 R040
Model:
D01193
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1909909

Rang of pillar taps (chrome plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
1909909
Expiry date:
30/09/2024
Size:
SEE MODEL
Marking:
SWAN LOGO on operating member
Installation Requirements:
R001 R005
Model:
C58116 - ¾” BSP (M) C58115- ½” BSP (M)
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1909910

Two hole, single outlet fixed combination tap assembly (chromium plated brass) incorporating quaterter turn ceramic disc headworks with single lever operating members. The spout outlet incorporate a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 7.0 bar. Maximum operating temperature 65°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1909910
Expiry date:
30/09/2024
Size:
¾” BSP (M)
Marking:
SWAN LOGO ON OPERATING MEMBER
Installation Requirements:
R001 R005 R010
Model:
C58120
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1909099

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The products are supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909099
Expiry date:
30/09/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with EPDM washers and ½” captive nut end connections.
Marking:
NABIS ON OPERATING MEMBER
Installation Requirements:
R001 R006 R010
Model:
A05028 NABIS BASIN MIXER
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#2001802

Range of screw down stop valves with brass bodies and PTFE seals. Maximum working pressure 10.0 bar. Maximum working temperature 65°C

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2001802
Expiry date:
31/01/2025
Size:
SEE MODEL
Marking:
CENTER, SIZE, FLOW ARROW & EN1213 ON BODY
Installation Requirements:
R001
Model:
292002 CENTER BRASS CXC COMP: 15mm compression 292003 CENTER BRASS CXC COMP: 22mm compression
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1910356

Range of shower handsets with either chrome plated plastic or chrome plated brass body. Maximum operating temperature 80°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1910356
Expiry date:
31/10/2024
Note:
Open outlet use only
Size:
½” BSP(M)
Marking:
NABIS ON BASE OF HANDSET
Installation Requirements:
R001 R040
Model:
A05048 NAB MULTI FUNCTION SHOWER HANDSETS
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1903105

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a single sequential headwork with single lever operating members. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are also supplied with metal backnuts Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1903105
Expiry date:
31/03/2024
Size:
15mm compression Model D67383 - Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections
Marking:
SARACEN ON OPERATING MEMBER
Installation Requirements:
R001 R006 R010
Model:
D67384 SARACEN TMV3 BASIN LEVER TAP COPPER TAILS D67385 SARACEN TMV3 BASIN LEVER TAP Model added March 2020: D67383
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#2001920

Range of pillar taps (chromium plated brass) incorporating non-rising spindle headworks with dome type operating memebers. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2001920
Expiry date:
31/01/2025
Size:
See model
Marking:
SWAN LOGO (BRAND OF WOLSELEY) ON OPERATING MEMBER
Installation Requirements:
R001 R005
Model:
C58100 - 1/2" BSP (M) C58101 - 3/4" BSP (M)
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#2001921

Single hole, single outlet fixed combination tap assemblies (Chromium plated brass), incorporating non-rising spindle headworks with dome type operating memebers. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001921
Expiry date:
31/01/2025
Size:
15mm copper pipe
Marking:
SWAN LOGO (BRAND OF WOLSELEY) ON OPERATING MEMBER
Installation Requirements:
R001 R006 R010
Model:
C58108
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#2003811

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts and a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2003811
Expiry date:
31/03/2025
Size:
¾” BSP (M)
Marking:
NABIS BATHROOM BARFORD ON INDICE ON OPERATING MEMBER
Installation Requirements:
R001 R006 R020
Model:
A05019 NABIS BARFORD LEVER 2TH BSM COMBINATION TAP ASSEMBLIES
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#2003812

Deck mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2003812
Expiry date:
31/03/2025
Size:
¾” BSP (M)
Marking:
NABIS BATHROOM BARFORD ON INDICE ON OPERATING MEMBER
Installation Requirements:
R001 R005 R010
Model:
A05020 NABIS BARFORD LEVER 2TH BATH FILLER COMBINATION TAP ASSEMBLIES
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#2003813

Range of Wall mounted, concealed, thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork which controls the flow using various operating members. Temperature is controlled independently via a thermostatic cartridge also using various operating members. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2003813
Expiry date:
31/03/2025
Note:
This approval does not include a shower hose and handset
Size:
15mm compression
Marking:
Nabis on face plate
Installation Requirements:
R001 R010 R040
Model:
A05042 NABIS CONCEALED THERMOSTATIC BLENDING VALVES
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#2003814

Range of wall mounted, manually operated blending valves with a chromium plated body and ceramic cartridge headwork controlling both the flow and temperature with a single lever operating member. Maximum working pressure 5 bar. Maximum operating temperature 85°C.

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2003814
Expiry date:
31/03/2025
Size:
15mm compression
Marking:
NABIS ON OPERATING MEMBER
Installation Requirements:
R001 R010 R040
Model:
A05043 NABIS MANUAL LEVER BLENDING VALVES
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#2003815

Range of single hole single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating members. The outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2003815
Expiry date:
31/03/2025
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections
Marking:
NABIS ON OPERATING MEMBER
Installation Requirements:
R001 R006 R010
Model:
B08919 NABIS PASILLA SINGLE LEVER MONO KITCHEN COMBINATION TAP ASSEMBLIES
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#2007916

Range of pillar taps (chromium plated brass) incorporating non-rising spindle headwork with cross top operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 7.0 bar. Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2007916
Expiry date:
31/07/2025
Size:
See model
Marking:
Swan logo (brand of Wolseley) on operating member.
Installation Requirements:
R001 R005
Model:
C58109 - ½ BSP (M) C58110- ¾ BSP (M)
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#2010805

‘CB ISR’ range of capillary fittings with internal solder rings, DZR brass or gunmetal capillary, lead free solder ring and threaded fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum working temperatures 99°C.

Section:
1115 Fittings for use with Tube and Pipe
Section Subtitle:
Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2010805
Expiry date:
31/10/2025
Size:
See model
Marking:
BSI Kitemark, size and company logo "w" on body
Installation Requirements:
R001
Model:
543901 * CB ISR STRAIGHT COUPLING 8MM 543902 * CB ISR STRAIGHT COUPLING 10MM 543903 * CB ISR STRAIGHT COUPLING 15MM 543904 * CB ISR STRAIGHT COUPLING 22MM 543905 * CB ISR STRAIGHT COUPLING 28MM 543906 * CB ISR STRAIGHT COUPLING 35MM 543907 * CB ISR STRAIGHT COUPLING 42MM 543908 * CB ISR STRAIGHT COUPLING 54MM 543913 * CB ISR SLIP STRAIGHT COUPLING 15MM 543914 * CB ISR SLIP STRAIGHT COUPLING 22MM 543923 * CB ISR ADAPTOR COUPLING 22MMX3/4 543924 * CB ISR REDUCING COUPLING 22MMX15MM 543925 * CB ISR REDUCING COUPLING 28MMX22MM 543933 * CB ISR FI STRAIGHT CONNECTOR 15MMX1/2 543943 * CB ISR MI STRAIGHT CONNECTOR 15MMX1/2 543944 * CB ISR MI STRAIGHT CONNECTOR 22MMX3/4 543945 * CB ISR MI STRAIGHT CONNECTOR 28MMX1 543952 * CB ISR REDUCER 10MMX8MM 543953 * CB ISR REDUCER 15MMX8MM 543954 * CB ISR REDUCER 15MMX10MM 543955 * CB ISR REDUCER 22MMX15MM 543956 * CB ISR REDUCER 28MMX15MM 543957 * CB ISR REDUCER 28MMX22MM 543963 * CB ISR 90D ELBOW 8MM 543964 * CB ISR 90D ELBOW 10MM 543965 * CB ISR 90D ELBOW 15MM 543966 * CB ISR 90D ELBOW 22MM 543967 * CB ISR 90D ELBOW 28MM 543968 * CB ISR 90D ELBOW 35MM 543969 * CB ISR 90D ELBOW 42MM 543970 * CB ISR 90D ELBOW 54MM 543973 * CB ISR 90D STREET ELBOW 15MM 543974 * CB ISR 90D STREET ELBOW 22MM 543975 * CB ISR 90D STREET ELBOW 28MM 543976 * CB ISR 90D STREET ELBOW 35MM 543977 * CB ISR 90D STREET ELBOW 42MM 543983 * CB ISR 45D ELBOW 15MM 543984 * CB ISR 45D ELBOW 22MM 543985 * CB ISR STOP END 28MM 543986 * CB ISR STOP END 35MM 543987 * CB ISR STOP END 42MM 543988 * CB ISR STOP END 54MM 543991 * CB ISR STOP END 8MM 543992 * CB ISR STOP END 10MM 543993 * CB ISR STOP END 15MM 543994 * CB ISR STOP END 22MM 543995 * CB ISR 45D ELBOW 28MM 543996 * CB ISR 45D ELBOW 35MM 543997 * CB ISR 45D ELBOW 42MM 543998 * CB ISR 45D ELBOW 54MM 544113 * CB ISR EQUAL TEE 15MM 544114 * CB ISR EQUAL TEE 22MM 544115 * CB ISR EQUAL TEE 28MM 544116 * CB ISR EQUAL TEE 35MM 544117 * CB ISR EQUAL TEE 42MM 544118 * CB ISR EQUAL TEE 54MM 544123 * CB ISR REDUCING TEE 22MMX22MMX15MM 544124 * CB ISR REDUCING TEE 28MMX28MMX15MM 544125 * CB ISR REDUCING TEE 28MMX28MMX22MM 544126 * CB ISR REDUCING TEE 22MMX15MMX22MM 544127 * CB ISR REDUCING TEE 28MMX22MMX28MM 544133 * CB ISR REDUCING TEE 15MMX15MMX22MM 544134 * CB ISR REDUCING TEE 22MMX15MMX15MM 544135 * CB ISR REDUCING TEE 35MMX35MMX15MM 544136 * CB ISR REDUCING TEE 35MMX35MMX22MM 544137 * CB ISR REDUCING TEE 35MMX35MMX28MM 544138 * CB ISR REDUCING TEE 42MMX42MMX15MM 544139 * CB ISR REDUCING TEE 42MMX42MMX22MM 544140 * CB ISR REDUCING TEE 42MMX42MMX28MM 544141 * CB ISR REDUCING TEE 42MMX42MMX35MM 544142 * CB ISR REDUCING TEE 54MMX54MMX15MM 544143 * CB ISR FI TEE 15MMX15MMX1/2 544144 * CB ISR REDUCING TEE 54MMX54MMX22MM 544145 * CB ISR REDUCING TEE 54MMX54MMX28MM 544146 * CB ISR REDUCING TEE 54MMX54MMX35MM 544147 * CB ISR REDUCING TEE 54MMX54MMX42MM 544148 * CB ISR REDUCER 35MMX15MM 544149 * CB ISR REDUCER 35MMX22MM 544150 * CB ISR REDUCER 35MMX28MM 544151 * CB ISR REDUCER 42MMX15MM 544152 * CB ISR REDUCER 42MMX22MM 544153 * CB ISR STR TAP CONNECTOR 15MMX1/2 544154 * CB ISR STR TAP CONNECTOR 15MMX3/4 544155 * CB ISR STR TAP CONNECTOR 22MMX3/4 544156 * CB ISR BENT TAP CONNECTOR 15MMX1/2 544157 * CB ISR REDUCER 42MMX28MM 544158 * CB ISR REDUCER 42MMX35MM 544159 * CB ISR REDUCER 54MMX15MM 544160 * CB ISR REDUCER 54MMX22MM 544161 * CB ISR REDUCER 54MMX28MM 544162 * CB ISR REDUCER 54MMX35MM 544163 * CB ISR REDUCER 54MMX42MM 544164 * CB ISR STR UNION ADAPTOR 22MMX1 544173 * CB ISR BACKPLATE ELBOW 15MMX1/2
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.