WOLSELEY Approvals


#1909907

Exposed bar type thermostatic blending valve (chromium plated brass) incorporating a two way ceramic disc diverting the flow between two shower outlets, temperature is controlled independently by a thermostatic cartridge with a manual override button. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied with a fixed over head shower, hose and headset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1909907
Expiry date:
30/09/2024
Size:
½” X ¾” off set unions
Marking:
WRAS SOLEX on rear of body
Installation Requirements:
R001 R040
Model:
D01193
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1909909

Rang of pillar taps (chrome plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
1909909
Expiry date:
30/09/2024
Size:
SEE MODEL
Marking:
SWAN LOGO on operating member
Installation Requirements:
R001 R005
Model:
C58116 - ¾” BSP (M) C58115- ½” BSP (M)
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1909910

Two hole, single outlet fixed combination tap assembly (chromium plated brass) incorporating quaterter turn ceramic disc headworks with single lever operating members. The spout outlet incorporate a plastic flow straightener and the product is supplied with metal back nuts. Maximum working pressure 7.0 bar. Maximum operating temperature 65°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1909910
Expiry date:
30/09/2024
Size:
¾” BSP (M)
Marking:
SWAN LOGO ON OPERATING MEMBER
Installation Requirements:
R001 R005 R010
Model:
C58120
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1909099

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The products are supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 70°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1909099
Expiry date:
30/09/2024
Size:
Stainless steel braided EPDM lined flexible hose assemblies with EPDM washers and ½” captive nut end connections.
Marking:
NABIS ON OPERATING MEMBER
Installation Requirements:
R001 R006 R010
Model:
A05028 NABIS BASIN MIXER
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#2001802

Range of screw down stop valves with brass bodies and PTFE seals. Maximum working pressure 10.0 bar. Maximum working temperature 65°C

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2001802
Expiry date:
31/01/2025
Size:
SEE MODEL
Marking:
CENTER, SIZE, FLOW ARROW & EN1213 ON BODY
Installation Requirements:
R001
Model:
292002 CENTER BRASS CXC COMP: 15mm compression 292003 CENTER BRASS CXC COMP: 22mm compression
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1910356

Range of shower handsets with either chrome plated plastic or chrome plated brass body. Maximum operating temperature 80°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1910356
Expiry date:
31/10/2024
Note:
Open outlet use only
Size:
½” BSP(M)
Marking:
NABIS ON BASE OF HANDSET
Installation Requirements:
R001 R040
Model:
A05048 NAB MULTI FUNCTION SHOWER HANDSETS
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#1903105

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a single sequential headwork with single lever operating members. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are also supplied with metal backnuts Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1903105
Expiry date:
31/03/2024
Size:
15mm compression Model D67383 - Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections
Marking:
SARACEN ON OPERATING MEMBER
Installation Requirements:
R001 R006 R010
Model:
D67384 SARACEN TMV3 BASIN LEVER TAP COPPER TAILS D67385 SARACEN TMV3 BASIN LEVER TAP Model added March 2020: D67383
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#2001920

Range of pillar taps (chromium plated brass) incorporating non-rising spindle headworks with dome type operating memebers. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2001920
Expiry date:
31/01/2025
Size:
See model
Marking:
SWAN LOGO (BRAND OF WOLSELEY) ON OPERATING MEMBER
Installation Requirements:
R001 R005
Model:
C58100 - 1/2" BSP (M) C58101 - 3/4" BSP (M)
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#2001921

Single hole, single outlet fixed combination tap assemblies (Chromium plated brass), incorporating non-rising spindle headworks with dome type operating memebers. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2001921
Expiry date:
31/01/2025
Size:
15mm copper pipe
Marking:
SWAN LOGO (BRAND OF WOLSELEY) ON OPERATING MEMBER
Installation Requirements:
R001 R006 R010
Model:
C58108
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval


#2003811

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts and a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2003811
Expiry date:
31/03/2025
Size:
¾” BSP (M)
Marking:
NABIS BATHROOM BARFORD ON INDICE ON OPERATING MEMBER
Installation Requirements:
R001 R006 R020
Model:
A05019 NABIS BARFORD LEVER 2TH BSM COMBINATION TAP ASSEMBLIES
Factor:
WOLSELEY
Company Name
WOLSELEY
Address
KINGMAKER COURT WARWICK TECHNOLOGY PARK WARWICK
Postcode
CV34 6DY

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.