Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headworks with single lever operating member and waterfall type spout. The hose inlets incorporate a stainless-steel strainer and the product is supplied with a click type pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Basin pillar tap (chromium plated brass), incorporating ¼ turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with plastic back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Wall mounted, two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a 3-way (2 on, 1 off) manual diverter with a single lever operating member which controls the flow to either the bath spout or overhead shower outlet. The outlet to the shower hose incorporates a ceramic disc manual diverter (operated by turning the spout through 90°) to divert the flow between the spout and shower outlet. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member, which also incorporates a manual override button. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The bath spout incorporates a plastic flow straightener and the product is supplied with a shower hose and handset, shower riser + arm and an overhead shower rose. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Wall mounted, two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a quarter turn ceramic disc headwork with cube operating member. Temperature is controlled independently by a thermostatic cartridge with a cube operating member incorporating a manual override button. The product is supplied with a shower hose, shower handset, shower riser and overhead shower rose. The product also incorporates a manual diverter on the riser rail which diverts between the overhead shower outlet and shower hose and handset. The spout has a waterfall outlet. The inlets incorporate stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet of models 62636-5201, 62636-5101, 63028-5001, 63193-5001, 63197-5001 & 62635-5201 incorporate a plastic aerator. Models 62912-5001 & 62934-5001 incorporate a plastic flow regulator on the inlets. Model 60638-5001 incorporates a plastic flow regulator on the outlet of the ceramic cartridge headwork within the main tap body. The 62636-5101 model is supplied with a click type waste and a combined washer and stainless-steel strainer on each inlet hose. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.
Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The products are supplied with metal backnuts and the spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 60°C
Wall mounted, exposed, bar type thermostatic shower valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Each inlet incorporates a stainless-steel strainer and an approved single check valve cartridge however the complete product has not been fully tested to demonstrate that it provides backflow protection. The product incorporates a manual diverter that diverts the flow from the overhead shower to a shower hose and handset (not supplied as part of the approval). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Quarter turn ceramic disc headwork. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever or dome type operating members. The spout outlets incorporate a plastic aerator and the products are supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Single hole, single outlet combination tap (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with a click type, pop-up waste & metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of two-hole, single outlet combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. Models 63195-5001 and 62638-5101 incorporate a plastic aerator in the spout outlet and the products are supplied with metal backnuts Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The product also features a self-cancelling diverter to shower outlet. The product is supplied with a shower handset, hose and metal backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C
Range of floor mounted single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a lockable diverter to shower outlet. The spout outlets incorporate a stainless-steel mesh and a plastic flow straightener. The products are supplied with a shower hose and handset. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C
Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) incorporating ceramic cartridge headwork and a single lever type operating member. Spout outlets incorporate a plastic aerator. Inlets incorporate stainless steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Deck mounted, two-hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with single lever operating member and a lockable diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. This product is supplied with metal backnuts, shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Shower handset with plastic body (black coloured finish). Maximum operating temperature 60°C.
Deck mounted, two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass, matt black or brushed brass) incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic flow straightener and the products are supplied with a shower hose, handset and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies incorporating brass bodies (chrome plated, brushed brass or matt black finishes) ceramic cartridge headwork with single lever operating members. The spout outlet of model 63184-5001 incorporates a flow straighter. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Deck mounted, single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.
Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) incorporating a ceramic cartridge headwork controlling the hot and cold flow. The 63264 model also incorporates a push to open, push to close, ‘detent’ headwork intended to control a filtered water supply. The spout outlets incorporate a plastic aerator. The cold water inlet hose is supplied with a chrome plated brass adaptor (½” BSP (F) x ½” BSP (M)) incorporating a check valve cartridge verified by test (suitable for backflow protection against Fluid Category 2). The 63264 model is also supplied with brass tee piece (½” BSP (F) x ½” BSP (M) x spigot (for quick connector)) for connection prior to the brass adaptor containing the check valve cartridge. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Single-hole single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member and a pull-out spray. The pull-out spray hose is stainless steel braided and has a. The pull-out spray outlet incorporates a button which changes and/or stops the flow of water, a plastic aerator and check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection.
Page of 1
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
