Xiamen Lota International Co., Ltd. Approvals


#1903045

Range of wall mounted, four hole, single outlet (fixed) combination tap assemblies (brass bodies - chromium plated brass spout and trims), incorporating ceramic cartridge headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The products are also supplied with a wall outlet elbow, a metal interlocked shower hose and a chromium plated shower handset. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0680 Combination Tap Assemblies
Section Subtitle:
Four hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
1903045
Expiry date:
31/03/2024
Size:
½” BSP (F)
Marking:
LOTA on headwork shroud.
Installation Requirements:
R001 R030
Model:
63059-5001 & 63059-516801.
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#1905079

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straighter with a stainless steel strainer or a plastic aerator (62314-7001 and 62461-7401 models only) or nothing (62333-5201 model). The product is supplied with a stainless steel strainer on each inlet hose, metal backnuts and either a click type waste or pop-up waste (6144-7001 and 62314-7001 models only). The inlet hoses of the 60144-7501 model are also supplied with an additional a plastic flow limiter, copper washer and a brass nut. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905079
Expiry date:
31/05/2024
Note:
No testing performed on pop-up waste
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
LOTA on rear of body.
Installation Requirements:
R001 R006 R009 R010
Model:
60144-5101, 60144-5601, 60144-7001, 60144-7501, 60147-7301, 60811-5201, 60811-7201, 62314-7001, 62333-5201, 62461-7401, D6113-5301.
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#1906352

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The inlet hoses incorporate a combined washer and stainless steel strainer. The 60147-7101 model is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906352
Expiry date:
30/06/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections
Marking:
Lota on body
Installation Requirements:
R001 R006 R009 R010
Model:
60147-7101 (chrome finish), 60147-7201 (chrome finish), 60147-7204 (BN PVD finish).
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#1907342

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks, and single lever operating members. The spout outlet incorporates a plastic flow straightener and stainless steel strainer. The 7001 suffix models are supplied with a click type waste. The inlet hoses include a combined washer and stainless steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1907342
Expiry date:
31/07/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Lota on body
Installation Requirements:
R001 R006 R009 R010
Model:
62628-5001 62628-7001 62646-7001 62646-5001
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#1909017

Range of pillar taps (chromium plated brass) incorporating a quarter turn ceramic disc headwork with a single lever operating member. The spout outlets incorporate a plastic flow straighter and a combined EPDM washer and stainless steel strainer. The product is supplied with plastic backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
1909017
Expiry date:
30/09/2024
Size:
See model.
Marking:
LOTA on rear of body.
Installation Requirements:
R001 R005
Model:
60142-5101: ½” BSP (M). 60143-5101: ¾” BSP (M).
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#1909019

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset and plastic backnuts. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
1909019
Expiry date:
30/09/2024
Size:
¾” BSP (M)
Marking:
LOTA on rear of body.
Installation Requirements:
R001 R006 R030
Model:
62638-5001
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#1906356

Wall mounted, exposed, thermostatic shower mixing valve (chromium plated brass), incorporating a 2 way ceramic disc diverter headwork with dome type operating member controlling the flow between an overhead shower outlet and a shower handset. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The product is supplied with a riser and an overhead shower, as well as a shower hose and handset. The inlets to the main body as well as to the overhead shower incorporate a combined washer and stainless steel strainer. Both inlets and the outlet to the shower hose incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet to the overhead shower also incorporates a plastic flow regulator. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1906356
Expiry date:
30/06/2024
Size:
½” BSP (M)
Marking:
Lota on body
Installation Requirements:
R001 R010 R040
Model:
78035-0101
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#1910051

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow straighter. The inlet hoses incorporate a combined stainless steel strainer and rubber washer. The product is supplied with a click type waste. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910051
Expiry date:
31/10/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.
Marking:
LOTA on body.
Installation Requirements:
R001 R006 R009 R010
Model:
60108-7201
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2003016

Range of wall mounted overhead showers (various finished brass, see models), incorporating a shower arm and overhead shower outlet. The overhead shower outlet incorporates an EPDM washer with a built in stainless-steel strainer on the connection to the shower arm. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2003016
Expiry date:
31/03/2025
Note:
Open outlet use only
Size:
½” BSP (M)
Marking:
Lota on face plate
Installation Requirements:
R001 R040
Model:
58008-2701 (Chrome Plated), 58008-276801 (Dusting – BL) & 58008-274408 (BCSPVD).
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2012063

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012063
Expiry date:
31/12/2025
Size:
Stainless-steel braided (DN8) PE-X lined flexible hose assembly with ½” captive nuts on model 62933-0001 Stainless-steel braided (DN6) PE-X lined flexible hose assembly with ½” captive nuts on model 62933-0101
Marking:
Lota on body.
Installation Requirements:
R001 R006 R009 R010
Model:
62933-0001 62933-0001 Chrome 62933-0101 62933-0101 Chrome
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2012062

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes) with ceramic cartridge headworks and single lever operating members. The discharge is via the hand spray outlet or the infra-red controlled outlet on the swivel arm. The cold Inlet has a single check valve assembly (suitable for protection against fluid category 2 backflow). The spouts incorporate a plastic aerator. Maximum operating pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012062
Expiry date:
31/12/2025
Size:
½” BSP (F) on cold inlet, stainless steel braided PE-X lined flexible hose assembly with ½” captive nut on hot inlet.
Marking:
Lota on body.
Installation Requirements:
R001 R006 R009 R010
Model:
63260-0001 Kitchen Mixer Chrome 63260-0004 Kitchen Mixer Brushed Nickel 63260-006801 Kitchen Mixer Matt Black 63260-004408 Kitchen Mixer Brushed Brass
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2104052

Two-hole, single outlet (fixed) combination tap assembly with a brass body (chromium plated), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet is a waterfall design. The inlets incorporate plastic flow restrictors. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2104052
Expiry date:
30/04/2026
Size:
¾” BSP (M)
Marking:
Lota on body
Installation Requirements:
R001 R006 R160
Model:
62919-5001
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2104007

Range of wall mounted, exposed, thermostatic shower mixing valves with brass bodies (various finishes - see model) incorporating a quarter turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. Both inlets incorporate a combined NBR washer and stainless-steel strainer, as well as an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2104007
Expiry date:
30/04/2026
Note:
This approval does not include a shower hose and handset.
Size:
½” BSP (M)
Marking:
Lota on body.
Installation Requirements:
R001 R010 R040
Model:
63035-5101 (Chrome). 63035-516801 (Matte black). 63035-514408 (Brushed brass).
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2107025

Wall mounted, two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
2107025
Expiry date:
31/07/2026
Size:
½” BSP (F)
Marking:
Lota on face plate of operating member.
Installation Requirements:
R001 R010 R040
Model:
62663-5001
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2107026

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes - see model), incorporating ceramic a cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2107026
Expiry date:
31/07/2026
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Lota on body.
Installation Requirements:
R001 R006 R009 R010
Model:
Basin mixer: 63399-5201 (Chrome), 63399-526801 (Matt black), 63399-524408 (Brushed brass). Tall basin mixer: 63400-5201 (Chrome), 63400-526801 (Matt black), 63400-524408 (Brushed brass).
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2107107

Range of shower hoses and handsets (various finishes - see model) with EPDM ‘O’-rings. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2107107
Expiry date:
31/07/2026
Note:
Open outlet use only.
Size:
½” BSP (M).
Marking:
Lota on shower handset
Installation Requirements:
R001 R040
Model:
58004-5601 (Chrome), 58004-566803 (Matt Black), 58004-564408 (Brushed Brass).
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2110039

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members and a lockable self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The products are supplied with a shower hose and handset, and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0525 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, lockable diverter to shower outlet.
WRAS Approval Number:
2110039
Expiry date:
31/10/2026
Size:
¾” BSP (M)
Marking:
Lota on base of tap.
Installation Requirements:
R001 R006 R020
Model:
63444-5001. 63447-5001.
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2110003

Single hole, single outlet (swivel), combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout incorporates a push to open, push to close ‘detent’ headwork and the spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2110003
Expiry date:
31/10/2026
Size:
Stainless steel braided PEX lined flexible hose assemblies with ½" captive nuts end connections.
Marking:
Lota on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
63303-0101
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2201018

Range of two hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is also supplied with an alternative spout outlet that incorporates a plastic flow straightener and a stainless-steel strainer. This product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201018
Expiry date:
31/01/2027
Size:
½” BSP (M)
Marking:
Lota on front of body
Installation Requirements:
R001 R006 R010
Model:
63479-00X Where X denotes finish and can be replaced with the following: 01 = Chrome, 04 = Brushed Nickel, 4408 = Brushed Brass, 6801 = Matt Black, 09 = Brushed Copper, 0402 = Brushed Nickel PVD, 2409 = Brushed Bronze.
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval


#2201051

A range of single hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is also supplied with an alternative spout outlet that incorporates a plastic flow straightener and a stainless-steel strainer. The products are supplied with a loose brass ½” BSP (M) x ½” BSP (F) adaptor for installation on the cold inlet. This adaptor incorporates a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum working temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2201051
Expiry date:
31/01/2027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Lota on body
Installation Requirements:
R001 R006 R009 R010
Model:
63477-00X, 63478-00X. Where X denotes finish and can be replaced with the following: 01 = Chrome, 04 = Brushed Nickel, 4408 = Brushed Brass, 6801 = Matt Black, 09 = Brushed Copper, 0402 = Brushed Nickel PVD, 2409 = Brushed Bronze.
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Phone
86-592-6665866

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.