Hansgrohe SE Approvals


#1907700

Ceramic cartridge headwork with a plastic body and EPDM seals for insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 Bar. Maximum operating temperature 80°C

Section:
0440 Headworks
WRAS Approval Number:
1907700
Expiry date:
31/07/2024
Size:
Ø 27mm
Marking:
Hansgrohe on body
Installation Requirements:
R001
Model:
30 614 320 - J27Joystick mixing cartridge.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903005

Range of wall mounted, manually operated blending valves with brass bodies (various finishes), incorporating ceramic cartridge headworks and various single lever operating members. The products also incorporate a self-cancelling diverter. Models listed are trim and finish sets, intended for use with the Hansgrohe iBox (01 800 180 or 01 810 180). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
1903005
Expiry date:
31/03/2024
Note:
Not supplied with shower hose and handset. The Hansgrohe iBox is not covered by this approval.
Size:
Body for insertion into Hansgrohe iBox.
Marking:
Hansgrohe and/or AXOR on wall-plate and/or operating member.
Installation Requirements:
R001 R030
Model:
10 415 xxx - AXOR Starck Classic, 10 416 xxx - AXOR Starck, 10 445 xxx - AXOR Starck X, 11 425 xxx - Urquiola, 12 415 xxx - AXOR Starck Organic, 14 145 xxx - Hansgrohe Talis, 15 445 xxx - Hansgrohe PuraVida, 17 415 xxx - AXOR Carlton, 18 455 xxx - Massaud, 31 454 xxx - Hansgrohe Metris, 31 465 xxx - Hansgrohe Metris S, 31 485 xxx - Hansgrohe Metris Classic, 31 493 xxx - Hansgrohe Metris, 31 945 xxx - Hansgrohe Focus, 32 475 xxx - Hansgrohe Talis S, 34 425 xxx - AXOR Citterio M, 39 455 xxx - AXOR Citterio & 71 405 xxx - Hansgrohe Logis Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903001

Range of concealed rough-in sets with brass bodies, intended for use in conjunction with trim and finish sets. The products incorporate elbow fittings. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
1903001
Expiry date:
31/03/2024
Size:
½” BSP (F)
Marking:
Hansgrohe, AXOR and model on adhesive label on the body.
Installation Requirements:
R001 R040
Model:
13 129 180 - Hansgrohe ShowerTablet 600 & 45 442 180 - Axor Thermostat 800
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903002

‘Hansgrohe Raindance E’ range of overhead shower outlets with brass bodies (various finishes), incorporating a stainless-steel strainer. Model 26 253 xxx also incorporates a plastic flow regulator. Models listed are intended for use in conjunction with basic set for Raindance E (26 254 180) Maximum operating temperature 60ºC.

Section:
1650 Shower Outlets
WRAS Approval Number:
1903002
Expiry date:
31/03/2024
Note:
Open outlet use only. Raindance E basic set (26 254 180)
Size:
½” BSP (M)
Marking:
Hansgrohe on shower plate.
Installation Requirements:
R001 R007 R040
Model:
Hansgrohe Raindance E 400: 26 252 xxx & 26 253 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1904703

Range of two hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks with various single lever operating members. The spout outlets incorporate a plastic flow straightener and a stainless steel strainer. The product is supplied with metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1904703
Expiry date:
30/04/2024
Size:
¾” BSP (M)
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R005 R010
Model:
31 423 xxx - Hansgrohe Metris, 31 427 xxx - Hansgrohe Talis & 31 523 xxx - Hansgrohe Focus. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903006

‘Hansgrohe Metris’ range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1903006
Expiry date:
31/03/2024
Size:
Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Hansgrohe Base (front) of body.
Installation Requirements:
R001 R006 R009 R010
Model:
Hansgrohe Metris Range: 14 823 xxx & 14 822 800 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903007

Wall mounted, two hole, single outlet (swivel) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork and joystick operating member. The spout outlet incorporates a plastic aerator. The spout outlet connections also incorporate a plastic flow regulator and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. The model listed is a spout and finish set intended for use with basic rough-in sets (13622180/13623180). The spout outlet incorporates a plastic flow regulator with stainless steel strainer. Maximum working pressure 10.0 bBar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1903007
Expiry date:
31/03/2024
Note:
Basic rough-in sets 13622180 & 13623180 are not covered by the scope of this approval.
Size:
½” BSP (F)
Marking:
AXOR at Base of swivel
Installation Requirements:
R001 R010 R040
Model:
38 815 xxx - Axor Uno² Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903008

Single hole single outlet (swivel) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headworks with single lever operating member. The spout outlet incorporates a plastic aerator. Product is supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1903008
Expiry date:
31/03/2024
Note:
No testing performed on the pop up waste
Size:
Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Hansgrohe on base of tap
Installation Requirements:
R001 R006 R009 R010
Model:
72 105 xxx - Hansgrohe Talis S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903009

‘Starck’ range of metal effect shower hoses in a variety of finishes, incorporating an LLDPE liner. Maximum operating temperature - 70°C

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
1903009
Expiry date:
31/03/2024
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
Axor on conical nut
Installation Requirements:
R001
Model:
28 282 xxx - AX Starck 1.25m, 30 469 418 - ISI-STARCK 1.25m, 28 286 xxx - AX Starck 1.60m, 30 477 218 - ISI-STARCK 1.60m & 28 284 xxx - AX Starck 2.00m. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903323

Chromium plated plastic shower handset (various finishes) with EPDM seals The inlet incorporates a plastic flow regulator and stainless-steel strainer. Maximum operating temperature 60°C. Open outlet use only.

Section:
1650 Shower Outlets
WRAS Approval Number:
1903323
Expiry date:
31/03/2024
Size:
½” BSP (M)
Marking:
Hansgrohe on body
Installation Requirements:
R001 R040
Model:
26 014 000 - Raindance S 120 3Jet P Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903339

‘Hansgrohe Novus’ range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks with various single lever operating members. The spout outlets incorporate a plastic aerator and some products are supplied with either a lever operated or click-type pop-up waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1903339
Expiry date:
31/03/2024
Note:
No testing performed on lever operated pop-up wastes.
Size:
Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
Hansgrohe Novus Range: 71 020 xxx - with lever operated waste set, 71 021 xxx, 71 022 xxx - Coolstart with click type pop-up waste, 71 030 xxx - with lever operated waste, 71 031 xxx, 71 032 xxx - Coolstart with click type pop-up waste, 71 080 xxx - with lever operated waste, 71 084 xxx - Coolstart with lever operated waste, 71 081 xxx - with lever operated waste, 71 085 xxx - CoolStart with lever operated waste, 71 180 xxx - CoolStart, 71 920 xxx - with lever operated waste, 71 921 xxx - with lever operated waste, 71 123 xxx - with lever operated waste & 71 124 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903348

Metropol range of three hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter ceramic disc headworks with single lever operating members. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
1903348
Expiry date:
31/03/2024
Size:
Stainless steel braided PEX lined flexible hose assemblies with ⅜” captive nut end connections.
Marking:
Hansgrohe on body.
Installation Requirements:
R001 R006 R007 R009 R010
Model:
32 514 xxx - Metropol 3-hole basin mixer 110 with lever handles. 74 514 xxx - Metropol 3-hole basin mixer 110 with loop handles. 32 515 xxx - Metropol 3-hole basin mixer 160 with lever handles. 74 515 xxx - Metropol 3-hole basin mixer 160 with loop handles. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903349

Hansgrohe Metropol’ range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1903349
Expiry date:
31/03/2024
Size:
Stainless steel braided PE-X lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Hansgrohe on body.
Installation Requirements:
R001 R006 R009 R010
Model:
Hansgrohe Metropol: 32 511 000 & 74 511 000 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903003

‘Axor Urquiola’ range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and dome type operating members. The spout outlets are fitted with a plastic aerator which also incorporates a plastic flow regulator. Models 11 020 xxx & 11 025 xxx are supplied with lever operated pop-up wastes. Model 11 034 xxx also features a soap tray. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1903003
Expiry date:
31/03/2024
Note:
No testing performed on pop-up waste.
Size:
Stainless-steel braided PE-X lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
Marking:
AXOR & Hansgrohe on base of tap body.
Installation Requirements:
R001 R006 R009 R010
Model:
Axor Urquiola Range: 11 020 xxx, 11 021 xxx, 11 025 xxx, 11 034 xxx & 11 035 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903338

‘Hansgrohe Raindance S’ range of overhead shower outlets with brass bodies (various finishes), incorporating a brass swivel connector and EPDM o-rings. Model 26 607 000 is supplied with a brass shower arm for wall mounting, whilst 27 620 000 is supplied with a brass ceiling connector. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1903338
Expiry date:
31/03/2024
Note:
Open outlet use only.
Size:
½” BSP (M) or ½” BSP (F)
Marking:
Hansgrohe on edge of shower
Installation Requirements:
R001 R040
Model:
Hansgrohe Raindance S Range: 27 607 xxx, 27 620 xxx & 27 623 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903308

Wall mounted, bar-type thermostatic shower valve with brass body (various finishes), incorporating a ceramic disc headwork controlling and diverting the flow between shower outlets using a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The valve inlets incorporate stainless-steel strainers, plastic flow regulators and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with an overhead shower (on a fixed riser), handshower and shower hose. The overhead shower incorporates a stainless-steel strainer at the inlet. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1903308
Expiry date:
31/03/2024
Size:
¾” BSP (M) offset union
Marking:
Hansgrohe on valve body.
Installation Requirements:
R001 R020
Model:
27 633 xxx - Raindance Select S Showerpipe 240 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1904067

‘Hansgrohe Logis’ wall mounted, two-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Model listed is a spout and finish set, intended for use in conjunction with concealed basic set 13 622 180. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1904067
Expiry date:
30/04/2024
Note:
The concealed basic set 13 622 180 is not covered by the scope of this approval.
Size:
½” BSP (M)
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R010 R040
Model:
71 220 xxx - Hansgrohe Logis Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1904068

Range of partially concealed, wall mounted, manually operated blending valves with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The product also incorporates a self-cancelling diverter. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
1904068
Expiry date:
30/04/2024
Size:
½” BSP (F)
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R010 R030 R040 R120
Model:
71 408 xxx Hansgrohe Logics E bath mixer set for concealed installation. 71 246 xxx Hansgrohe MySport Single lever bath mixer for concealed installation. 71 245 xxx MyCube Single lever bath mixer for concealed installation 31 779 xxx Hansgrohe Ecos Bath mixer set for concealed installation Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1904069

‘Axor ShowerSolutions’ wall mounted, thermostatic shower valve with brass body (various finishes), incorporating ‘detent’ (push on, push off) headworks controlling the flow via push button assembly. Temperature is controlled independently via a thermostatic cartridge using a single lever operating member. The inlets incorporate stainless steel strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1904069
Expiry date:
30/04/2024
Size:
½” BSP (M)
Marking:
AXOR on front of valve body.
Installation Requirements:
R001 R010 R040
Model:
45 440 xxx - Axor ShowerSolutions 800 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1904006

‘Hansgrohe Ecostat’ and ‘Versostat’ ranges of wall mounted, thermostatic shower control valves with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks controlling the flow using single lever operating members. Temperature is controlled independently via a thermostatic cartridge, also using various lever operating members. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1904006
Expiry date:
30/04/2024
Size:
½” BSP (M) x ¾” BSP (M) offset unions.
Marking:
Hansgrohe on body.
Installation Requirements:
R001 R010 R040
Model:
13 113 xxx - Hansgrohe Ecostat, 13 116 xxx - Hansgrohe Ecostat, 13 117 xxx - Hansgrohe Ecostat & 15 368 xxx - Hansgrohe Versostat. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1904012

‘Hansgrohe Raindance’ range of overhead shower outlets with brass bodies (various finishes). The products incorporate a plastic flow regulator. Models listed are to be used in conjunction with the 26 471 180 basic set. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1904012
Expiry date:
30/04/2024
Note:
Open outlet use only. The 26 471 180 basic set is not approved in its own right.
Size:
½” BSP (M)
Marking:
Hansgrohe on front of shower faceplate.
Installation Requirements:
R001 R009
Model:
Hansgrohe Raindance range: 26 472 xxx & 26 481 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe Wasselonne S.A.S
Company Name
Hansgrohe Wasselonne S.A.S
Address
Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company

Print This Approval


#1903324

‘Secuflex’ range of rim mounted, concealed pull-out shower sets, consisting of a metal interlocked shower hose, brass outlet connector and a stainless steel braided, silicone lined flexible connecting hose assembly. The concealed hose connection incorporates an approved single check valve cartridge; however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Maximum operating temperature 70°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
1903324
Expiry date:
31/03/2024
Note:
Open outlet use only. Not supplied with a shower handset. IRN R007 applies only to the braided connection hose.
Size:
½” BSP (M)
Marking:
Hansgrohe on shower holder.
Installation Requirements:
R001 R007 R040
Model:
28 380 xxx - Hansgrohe Secuflex & 28 382 xxx - AXOR Secuflex. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1906704

Single hole, single outlet (swivel) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906704
Expiry date:
30/06/2024
Size:
Stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜" captive nut end connections
Marking:
Hansgrohe on front base of body
Installation Requirements:
R001 R006 R009 R010
Model:
14 870 XXX Hansgrohe Talis S² Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company

Print This Approval


#1905300

AXOR Uno Range of single hole, single outlet (fixed) over the rim bidet combination tap assemblies with brass bodies (various finishes). Incorporating ceramic cartridge headworks and various operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole, metal.
WRAS Approval Number:
1905300
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
AXOR on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
45 200 xxx (dome type operating member) 38 211 xxx (loop type operating member) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905326

Wall mounted shower outlet having a riser pipe with diverter having a brass body (various finishes) from overhead to a hand held shower outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1905326
Expiry date:
31/05/2024
Size:
½” BSP (F)
Marking:
Hansgrohe on overhead shower and handset holder.
Installation Requirements:
R001 R040
Model:
27 795 xxx HG Crometta S 240 SHP EcoSm Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905384

Range of combined bath filler, waste and overflow assemblies (in various finishes with a plastic body). The outlets incorporate plastic aerator. Maximum operating temperature 70°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
1905384
Expiry date:
31/05/2024
Note:
Open outlet use only. For domestic use IRN R160 applies. For non-domestic use IRN 090 applies.
Size:
30.23mm
Marking:
Axor logo on faceplate
Installation Requirements:
R001 R160
Model:
Hansgrohe Exafill basic sets: 58 125 180, 58 126 180, 58 301 180 & 58 302 180. Hansgrohe Exafill bath filler, waste & overflow set: 58 127 xxx, 58 128 xxx, 58 300 xxx Axor Finish Set, 58 303 xxx Axor Complete Set & 58 123 xxx Hansgrohe Complete Set. ‘xxx’ denotes finish, and can be replaced with: -000 Chrome -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905001

Floor mounted single hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0465 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905001
Expiry date:
31/05/2024
Size:
½” BSP (M)
Marking:
Hansgrohe on front of Body
Installation Requirements:
R001 R010 R040
Model:
72 412 xxx HG Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905018

Concealed, floor mounting basic set with DZR brass body for use with floor standing bath mixers. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
1905018
Expiry date:
31/05/2024
Size:
½” BSP (F)
Marking:
Hansgrohe and DR on body
Installation Requirements:
R001 R010
Model:
10 452 180 Axor Starck
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905003

Range of wall mounted, concealed, manual blending shower valves with brass bodies (various finishes), incorporating a ceramic cartridge headwork and various single lever operating members. The product is also supplied with ¾” BSP (M) x ½” BSP (F) adaptors. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
1905003
Expiry date:
31/05/2024
Note:
This approval does not include a shower hose and handset. The basic set is not approved in its own right.
Size:
¾” BSP (F)
Marking:
AXOR on wall plate.
Model:
Basic set: 01 800 180 ibox universal Finish sets: 10 615 xxx Axor Starck (single lever operating member) 10 616 xxx Axor Starck (single lever operating member) 10 645 xxx Axor Starck X (single lever operating member) 11 625 xxx Axor Urquiola (single lever operating member) 12 605 xxx Axor Starck Organic (dome type operating member) 14 165 xxx Hansgrohe Talis Classic (single lever operating member) 15 665 xxx Hansgrohe PuraVida (single lever operating member) 18 655 xxx Axor Massaud (dome type operating member) 31 456 xxx Hansgrohe Metris (single lever operating member) 31 665 xxx Hansgrohe Metris S (single lever operating member) 31 685 xxx Hansgrohe Metris (single lever operating member) 31 965 xxx Hansgrohe Focus (single lever operating member) 32 675 xxx Hansgrohe Talis S (single lever operating member) 34 625 xxx Axor Citterio M (single lever operating member) 39 655 xxx Axor Citterio (single lever operating member) 71 605 xxx Hansgrohe Logis (single lever operating member). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905040

Range of thermostatic cartridges with plastic bodies, plastic strainers and EPDM ‘O’-rings. For insertion into specifically dimensioned bores. Maximum operating temperature 80°C.

Section:
0442 Thermostatic cartridges
WRAS Approval Number:
1905040
Expiry date:
31/05/2024
Size:
Ø 30mm
Marking:
HG on body.
Installation Requirements:
R001
Model:
30 615 900 Thermostatic Cartridge T32K & 31 615 900 Thermostatic Cartridge T32K
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905050

Single hole, single outlet (swivel) combination tap assembly with brass body (various finishes). Incorporating a ceramic cartridge headwork with a joystick type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905050
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined hose assemblies incorporating ⅜” captive nut end connections
Marking:
AXOR on front of body
Installation Requirements:
R001 R006 R009 R010
Model:
10 801 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905054

Range of chromium plated plastic bodied or brass bodied (28 489 xxx model) overhead shower outlets. The 27 405 xxx model is supplied with a ceiling mounted shower arm and the 27 424 xxx models with a wall mounted shower arm, both are chromium plated brass. All shower outlets incorporate a combined EPDM washer and plastic strainer on the inlet. Maximum operating temperature 70°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1905054
Expiry date:
31/05/2024
Size:
Hansgrohe Raindance models: ½” BSP (M). Axor Carlton & Citterio models: ½” BSP (F).
Marking:
Hansgrohe or Axor on showerhead.
Installation Requirements:
R001 R040
Model:
27 405 xxx Hansgrohe Raindance C 240 AIR Overhead shower. 27 424 xxx Hansgrohe Raindance C 240 AIR Overhead shower. 28 474 xxx Axor Carlton Overhead shower. 28 487 xxx Axor Carlton Overhead shower. 28 489 xxx Axor Citterio Overhead shower. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe Wasselonne S.A.S
Company Name
Hansgrohe Wasselonne S.A.S
Address
Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company

Print This Approval


#1905069

Wall mounted, concealed, thermostatic blending valves with brass body (various finishes). The temperature is controlled via a thermostatic cartridge with a single lever operating member incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1905069
Expiry date:
31/05/2024
Note:
The 01 800 180 iBox universal basic set is not approved in its own right.
Size:
¾” BSP (F) inlet and outlet
Marking:
AXOR, Hansgrohe on face plate
Installation Requirements:
R001 R010 R040
Model:
16 823 xxx Axor Montreux Finish Set Thermostatic Mixer For use with Basic set: 01 800 180 iBox universal Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1910700

Single hole, single outlet (swivel) combination tap assemblies (various finishes), incorporating half turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts and a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910700
Expiry date:
31/10/2024
Note:
No testing performed on pop-up waste.
Size:
10mm compression
Marking:
AXOR on front base of body
Installation Requirements:
R001 R006 R010
Model:
17 030 xxx AXOR Carlton Where xxx denotes finish available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905065

Range of overhead shower outlets with brass bodies (various finishes). Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
1905065
Expiry date:
31/05/2024
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
Hansgrohe on face of shower
Installation Requirements:
R001 R040
Model:
Hansgrohe Raindance Select E 27 384 xxx & 27 385 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe Wasselonne S.A.S
Company Name
Hansgrohe Wasselonne S.A.S
Address
Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company

Print This Approval


#1905047

Range of single hole, single outlet (swivel) combination tap assembly with brass body (various finishes). Incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905047
Expiry date:
31/05/2024
Size:
Stainless steel braided thermoplastic silicone lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
AXOR on base of body.
Installation Requirements:
R001 R006 R009 R010
Model:
14 850 XXX AXOR UNO SINGLE LEVER KITCHEN MIXER Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905045

Deck mounted three-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating quarter turn ceramic disc headworks with dome type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste and stainless steel braided PEX lined flexible connecting hose assemblies, (to be installed between the side valves and the spout). Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
1905045
Expiry date:
31/05/2024
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Hansgrohe on spout
Installation Requirements:
R001 R006 R007 R009 R010
Model:
71 133 xxx Hansgrohe Logis 3-hole basin mixer 150 with pop-up waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1906013

Range of wall mounted exposed thermostatic shower mixing valve with brass bodies (various finish) incorporating a ceramic disc headwork which controls the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Model 13108 incorporates a manual diverter headwork which controls flow and diverts water to either handset or shower head with a dome type operating member. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1906013
Expiry date:
30/06/2024
Note:
This approval does not include a shower hose or handset.
Size:
½” BSP (M)
Marking:
Hansgrohe on front of valve body.
Installation Requirements:
R001 R010 R040
Model:
13 102 xxx Hansgrohe ShowerTablet 350 & 13 108 xxx Hansgrohe ShowerTablet 600 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1906018

Range of two-hole, wall mounted, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1906018
Expiry date:
30/06/2024
Note:
The basic sets are not approved in their own right.
Size:
½” BSP (F)
Marking:
AXOR on operating member.
Installation Requirements:
R001 R010 R040
Model:
38 121 xxx Axor Uno & 38 122 xxx Axor Uno finish sets for use with 13622180+13623180 basic sets. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. .
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1906035

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members. The spout outlets incorporate plastic/rubber aerators. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
1906035
Expiry date:
30/06/2024
Size:
½” BSP (F)
Marking:
Axor on spout.
Installation Requirements:
R001 R010 R040
Model:
Basic set (concealed part): 10 303 180 Axor for use with trim sets: 10 313 xxx Axor Starck 3 16 532 xxx Axor Montreux 16 534 xxx Axor Montreux, 39 143 xxx Axor Citterio 39 147 xxx Axor Citterio 39 313 xxx Axor Citterio 39 315 xxx Axor Citterio 39 144 xxx Axor Citterio 39 148 xxx Axor Citterio 39 314 xxx Axor Citterio 39 316 xxx Axor Citterio Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1906051

Range of overhead shower outlets with brass bodies (various finishes). Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1906051
Expiry date:
30/06/2024
Note:
Open outlet use only.
Size:
½” BSP male
Marking:
Hansgrohe on faceplate
Installation Requirements:
R001 R040
Model:
27 372 xxx Hansgrohe Raindance E Overhead shower 420 1jet with shower arm 27 373 xxx Hansgrohe Raindance E Overhead shower 420 2jet with shower arm Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe Wasselonne S.A.S
Company Name
Hansgrohe Wasselonne S.A.S
Address
Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company

Print This Approval


#1906094

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic/rubber aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906094
Expiry date:
30/06/2024
Size:
Stainless steel braided, PE-X lined flexible hose assemblies with 3/8” captive nut.
Marking:
AXOR on side of body.
Installation Requirements:
R001 R006 R009 R010
Model:
38 830 xxx Axor Uno² & 39 850 xxx Axor Citterio. Model added May 2021: 39 853 xxx Axor Citterio Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#1906108

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1906108
Expiry date:
30/06/2024
Note:
13 622 180 Basic rough in set is not approved in its own right.
Size:
½” BSP (F)
Marking:
Hansgrohe PuraVida models: Hansgrohe on face plate. AXOR Uno 38 112 xxx & 38 115 xxx models + AXOR Citterio 39 112 xxx & 39 115 xxx models: AXOR on face plate. AXOR Uno 38 113 xxx & 38 116 xxx models + AXOR Citterio 39 113 xxx & 39 116 xxx models: AXOR on spout.
Installation Requirements:
R001 R010 R040
Model:
13 622 180 Basic rough in set for use with the following trim set and headwork models. Hansgrohe PuraVida: 15 084 xxx, 15 085 xxx. AXOR Uno: 38 112 xxx, 38 113 xxx, 38 115 xxx, 38 116 xxx. AXOR Citterio: 39 112 xxx, 39 113 xxx, 39 115 xxx, 39 116 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905035

Range of wall mounted shower outlets (with shower arm: with brass bodies in a range of finishes. 24 002/24 012 models are wall mounted with a shower arm. 24 003/24 013 models have a ceiling mounted shower arm. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
1905035
Expiry date:
31/05/2024
Note:
Open outlet use only. The 24 010 180 basic set and 01 800 180 iBox rough in set are not approved in their own right
Size:
½” BSP (M)
Marking:
Hansgrohe on shower plates (Models 24 003, 24 013, 24 002 & 24 012) Axor on shower plate (Models 35 274, 35 278 & 35 277)
Installation Requirements:
R001 R040
Model:
24 002 400 Hansgrohe Rainmaker Select 460 1jet overhead shower with ceiling connector 100 mm 24 002 600 Hansgrohe Rainmaker Select 460 1jet overhead shower with ceiling connector 100 mm 24 012 400 Hansgrohe Rainmaker Select 460 1jet overhead shower EcoSmart 9 l/min with ceiling connector 100 mm 35 277 xxx AXOR ShowerSolutions Overhead shower 460 / 300 1jet with ceiling connector with rough 24 010 180 Rainmaker Select Basic set for overhead shower with ceiling connector 24 003 400 Hansgrohe Rainmaker Select 460 1jet overhead shower with shower arm 460 mm 24 003 600 Hansgrohe Rainmaker Select 460 1jet overhead shower with shower arm 460 mm 24 013 400 Hansgrohe Rainmaker Select 460 1jet overhead shower EcoSmart 9 l/min with shower arm 460 mm 35 274 xxx AXOR ShowerSolutions Overhead shower 460 / 300 1jet with shower arm and softcube escutcheons 35 278 xxx AXOR ShowerSolutions Overhead shower 460 / 300 1jet with shower arm and square escutcheons -400 (White/Chrome) and -600 (Black/Chrome) -xxx available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1907026

Range of installation kit with brass bodies and plastic housing with multiple inlets. The kits incorporate housings that are intended for a flow control cartridge and spout connection. Maximum operating temperature 60°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
1907026
Expiry date:
31/07/2024
Note:
Open outlet use only
Size:
½” BSP (F)
Marking:
Hansgrohe on adhesive label on the inside of the plastic housing
Installation Requirements:
R001 R040
Model:
01 750 180 Axor Basic set iBox universal. 01 850 180 Hansgrohe Basic set iBox universal. 16 182 180 Axor Uno Basic set. 30 132 210 Basic set iBox universal. 31 800 180 Basic set iBox universal. 01 800 180 Hansgrohe Basic set iBox universal. 01 700 180 AXOR Basic set iBox universal
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1907028

Range of wall mounted concealed thermostatic blending valves with brass body. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1907028
Expiry date:
31/07/2024
Size:
½” BSP (F)
Marking:
Hansgrohe and AXOR on wall plate
Installation Requirements:
R001 R010 R040
Model:
10 710 xxx AXOR Starck. 10 716 xxx AXOR Starck X. 11 730 xxx AXOR Urquiola. 12 710 xxx AXOR Starck Organic. 16 810 xxx AXOR Montreux. 34 715 xxx AXOR Citterio M. 38 375 xxx AXOR Uno. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1907029

Raindance Rainmaker concealed installation set and overhead showers outlets with brass bodies (various finishes). The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1907029
Expiry date:
31/07/2024
Note:
Open outlet use only. The 28 414 180 concealed installation set is not approved in its own right
Size:
Stainless steel braided silicone lined hose assemblies with ½” BSP male end connections
Marking:
Hansgrohe on face of shower
Installation Requirements:
R001 R009 R040
Model:
28 414 180 concealed installation set for use with Hansgrohe Raindance Rainmaker 28 417 xxx & 28 418 xxx shower outlets. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe Wasselonne S.A.S
Company Name
Hansgrohe Wasselonne S.A.S
Address
Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company

Print This Approval


#1907326

Range of wall mounted thermostatic shower valves with brass bodies (various finishes) incorporating a 2 way ceramic disc diverter controlling the flow to either the shower handset or an overhead shower using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. The inlet to the overhead shower incorporates a plastic strainer. The overhead shower inlets incorporate a combined washer and stainless steel strainer. The overhead shower inlets on the 27 268 & 27 281 models also incorporate plastic flow regulators. The inlets to the main body incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1907326
Expiry date:
31/07/2024
Size:
½” x ¾” BSP off set unions
Marking:
Hansgrohe on valve body, shower head and handset holder on riser
Installation Requirements:
R001 R010 R040
Model:
27 268 xxx HG Crometta S 240 SHP EcoSmart 9l/min chrom. 27 267 xxx HG Crometta S 240 Showerpipe chrom. 27 281 xxx HG Crometta E 240 SHP EcoSmart 9l/min chrom. 27 271 xxx HG Crometta E 240 Showerpipe chrom. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1907329

Range of wall mounted bath spout outlets with brass bodies (various finishes) with a plastic aerator incorporated into the outlet. Maximum operating temperature 60°C

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
1907329
Expiry date:
31/07/2024
Note:
Open outlet use only
Size:
½” BSP (M)
Marking:
AXOR on body
Installation Requirements:
R001 R040
Model:
46 410 xx0. 46 411 xx0 (diamond cut). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1907330

Range of ceiling mounted shower units having a 4 jet spray pattern with some outlets incorporating a plastic aerator. The 10 628 & 10 629 include a built-in lighting system. The shower units are supplied in a range of finishes. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
1907330
Expiry date:
31/07/2024
Note:
The 10 922 180 AXOR Basic set is not approved in its own right. Open outlet use only.
Size:
½” BSP (M)
Marking:
Axor on shower face
Installation Requirements:
R001 R040
Model:
10 922 180 AXOR Basic set for ShowerHeaven 1200/300 4jet 10 628 XXX AXOR ShowerHeaven 1200/300 4jet with lighting 2700 K, 10 629 XXX AXOR ShowerHeaven 1200/300 4jet with lighting 3500 K, 10 637 XXX AXOR ShowerHeaven 1200/300 4jet without lighting. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 9

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.