Hansgrohe SE Approvals


#1906051

Range of overhead shower outlets with brass bodies (various finishes). Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1906051
Expiry date:
30/06/2024
Note:
Open outlet use only.
Size:
½” BSP male
Marking:
Hansgrohe on faceplate
Installation Requirements:
R001 R040
Model:
27 372 xxx Hansgrohe Raindance E Overhead shower 420 1jet with shower arm 27 373 xxx Hansgrohe Raindance E Overhead shower 420 2jet with shower arm Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe Wasselonne S.A.S
Company Name
Hansgrohe Wasselonne S.A.S
Address
Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company

Print This Approval


#1906094

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic/rubber aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906094
Expiry date:
30/06/2024
Size:
Stainless steel braided, PE-X lined flexible hose assemblies with 3/8” captive nut.
Marking:
AXOR on side of body.
Installation Requirements:
R001 R006 R009 R010
Model:
38 830 xxx Axor Uno² & 39 850 xxx Axor Citterio. Model added May 2021: 39 853 xxx Axor Citterio Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval


#1906108

Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1906108
Expiry date:
30/06/2024
Note:
13 622 180 Basic rough in set is not approved in its own right.
Size:
½” BSP (F)
Marking:
Hansgrohe PuraVida models: Hansgrohe on face plate. AXOR Uno 38 112 xxx & 38 115 xxx models + AXOR Citterio 39 112 xxx & 39 115 xxx models: AXOR on face plate. AXOR Uno 38 113 xxx & 38 116 xxx models + AXOR Citterio 39 113 xxx & 39 116 xxx models: AXOR on spout.
Installation Requirements:
R001 R010 R040
Model:
13 622 180 Basic rough in set for use with the following trim set and headwork models. Hansgrohe PuraVida: 15 084 xxx, 15 085 xxx. AXOR Uno: 38 112 xxx, 38 113 xxx, 38 115 xxx, 38 116 xxx. AXOR Citterio: 39 112 xxx, 39 113 xxx, 39 115 xxx, 39 116 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905035

Range of wall mounted shower outlets (with shower arm: with brass bodies in a range of finishes. 24 002/24 012 models are wall mounted with a shower arm. 24 003/24 013 models have a ceiling mounted shower arm. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
1905035
Expiry date:
31/05/2024
Note:
Open outlet use only. The 24 010 180 basic set and 01 800 180 iBox rough in set are not approved in their own right
Size:
½” BSP (M)
Marking:
Hansgrohe on shower plates (Models 24 003, 24 013, 24 002 & 24 012) Axor on shower plate (Models 35 274, 35 278 & 35 277)
Installation Requirements:
R001 R040
Model:
24 002 400 Hansgrohe Rainmaker Select 460 1jet overhead shower with ceiling connector 100 mm 24 002 600 Hansgrohe Rainmaker Select 460 1jet overhead shower with ceiling connector 100 mm 24 012 400 Hansgrohe Rainmaker Select 460 1jet overhead shower EcoSmart 9 l/min with ceiling connector 100 mm 35 277 xxx AXOR ShowerSolutions Overhead shower 460 / 300 1jet with ceiling connector with rough 24 010 180 Rainmaker Select Basic set for overhead shower with ceiling connector 24 003 400 Hansgrohe Rainmaker Select 460 1jet overhead shower with shower arm 460 mm 24 003 600 Hansgrohe Rainmaker Select 460 1jet overhead shower with shower arm 460 mm 24 013 400 Hansgrohe Rainmaker Select 460 1jet overhead shower EcoSmart 9 l/min with shower arm 460 mm 35 274 xxx AXOR ShowerSolutions Overhead shower 460 / 300 1jet with shower arm and softcube escutcheons 35 278 xxx AXOR ShowerSolutions Overhead shower 460 / 300 1jet with shower arm and square escutcheons -400 (White/Chrome) and -600 (Black/Chrome) -xxx available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1907026

Range of installation kit with brass bodies and plastic housing with multiple inlets. The kits incorporate housings that are intended for a flow control cartridge and spout connection. Maximum operating temperature 60°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
1907026
Expiry date:
31/07/2024
Note:
Open outlet use only
Size:
½” BSP (F)
Marking:
Hansgrohe on adhesive label on the inside of the plastic housing
Installation Requirements:
R001 R040
Model:
01 750 180 Axor Basic set iBox universal. 01 850 180 Hansgrohe Basic set iBox universal. 16 182 180 Axor Uno Basic set. 30 132 210 Basic set iBox universal. 31 800 180 Basic set iBox universal. 01 800 180 Hansgrohe Basic set iBox universal. 01 700 180 AXOR Basic set iBox universal
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 9 of 81

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.