Hansgrohe SE Approvals


#1904012

‘Hansgrohe Raindance’ range of overhead shower outlets with brass bodies (various finishes). The products incorporate a plastic flow regulator. Models listed are to be used in conjunction with the 26 471 180 basic set. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1904012
Expiry date:
30/04/2024
Note:
Open outlet use only. The 26 471 180 basic set is not approved in its own right.
Size:
½” BSP (M)
Marking:
Hansgrohe on front of shower faceplate.
Installation Requirements:
R001 R009
Model:
Hansgrohe Raindance range: 26 472 xxx & 26 481 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe Wasselonne S.A.S
Company Name
Hansgrohe Wasselonne S.A.S
Address
Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company

Print This Approval


#1903324

‘Secuflex’ range of rim mounted, concealed pull-out shower sets, consisting of a metal interlocked shower hose, brass outlet connector and a stainless steel braided, silicone lined flexible connecting hose assembly. The concealed hose connection incorporates an approved single check valve cartridge; however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Maximum operating temperature 70°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
1903324
Expiry date:
31/03/2024
Note:
Open outlet use only. Not supplied with a shower handset. IRN R007 applies only to the braided connection hose.
Size:
½” BSP (M)
Marking:
Hansgrohe on shower holder.
Installation Requirements:
R001 R007 R040
Model:
28 380 xxx - Hansgrohe Secuflex & 28 382 xxx - AXOR Secuflex. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1906704

Single hole, single outlet (swivel) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906704
Expiry date:
30/06/2024
Size:
Stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜" captive nut end connections
Marking:
Hansgrohe on front base of body
Installation Requirements:
R001 R006 R009 R010
Model:
14 870 XXX Hansgrohe Talis S² Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company

Print This Approval


#1905300

AXOR Uno Range of single hole, single outlet (fixed) over the rim bidet combination tap assemblies with brass bodies (various finishes). Incorporating ceramic cartridge headworks and various operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole, metal.
WRAS Approval Number:
1905300
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
AXOR on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
45 200 xxx (dome type operating member) 38 211 xxx (loop type operating member) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905326

Wall mounted shower outlet having a riser pipe with diverter having a brass body (various finishes) from overhead to a hand held shower outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1905326
Expiry date:
31/05/2024
Size:
½” BSP (F)
Marking:
Hansgrohe on overhead shower and handset holder.
Installation Requirements:
R001 R040
Model:
27 795 xxx HG Crometta S 240 SHP EcoSm Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 5 of 81

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.