Hansgrohe SE Approvals


#1904012

‘Hansgrohe Raindance’ range of overhead shower outlets with brass bodies (various finishes). The products incorporate a plastic flow regulator. Models listed are to be used in conjunction with the 26 471 180 basic set. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1904012
Expiry date:
30/04/2024
Note:
Open outlet use only. The 26 471 180 basic set is not approved in its own right.
Size:
½” BSP (M)
Marking:
Hansgrohe on front of shower faceplate.
Installation Requirements:
R001 R009
Model:
Hansgrohe Raindance range: 26 472 xxx & 26 481 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe Wasselonne S.A.S
Company Name
Hansgrohe Wasselonne S.A.S
Address
Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company

Print This Approval


#1903324

‘Secuflex’ range of rim mounted, concealed pull-out shower sets, consisting of a metal interlocked shower hose, brass outlet connector and a stainless steel braided, silicone lined flexible connecting hose assembly. The concealed hose connection incorporates an approved single check valve cartridge; however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Maximum operating temperature 70°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
1903324
Expiry date:
31/03/2024
Note:
Open outlet use only. Not supplied with a shower handset. IRN R007 applies only to the braided connection hose.
Size:
½” BSP (M)
Marking:
Hansgrohe on shower holder.
Installation Requirements:
R001 R007 R040
Model:
28 380 xxx - Hansgrohe Secuflex & 28 382 xxx - AXOR Secuflex. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1906704

Single hole, single outlet (swivel) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906704
Expiry date:
30/06/2024
Size:
Stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜" captive nut end connections
Marking:
Hansgrohe on front base of body
Installation Requirements:
R001 R006 R009 R010
Model:
14 870 XXX Hansgrohe Talis S² Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company

Print This Approval


#1905300

AXOR Uno Range of single hole, single outlet (fixed) over the rim bidet combination tap assemblies with brass bodies (various finishes). Incorporating ceramic cartridge headworks and various operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole, metal.
WRAS Approval Number:
1905300
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.
Marking:
AXOR on operating member
Installation Requirements:
R001 R006 R009 R010
Model:
45 200 xxx (dome type operating member) 38 211 xxx (loop type operating member) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905326

Wall mounted shower outlet having a riser pipe with diverter having a brass body (various finishes) from overhead to a hand held shower outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1905326
Expiry date:
31/05/2024
Size:
½” BSP (F)
Marking:
Hansgrohe on overhead shower and handset holder.
Installation Requirements:
R001 R040
Model:
27 795 xxx HG Crometta S 240 SHP EcoSm Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905384

Range of combined bath filler, waste and overflow assemblies (in various finishes with a plastic body). The outlets incorporate plastic aerator. Maximum operating temperature 70°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
1905384
Expiry date:
31/05/2024
Note:
Open outlet use only. For domestic use IRN R160 applies. For non-domestic use IRN 090 applies.
Size:
30.23mm
Marking:
Axor logo on faceplate
Installation Requirements:
R001 R160
Model:
Hansgrohe Exafill basic sets: 58 125 180, 58 126 180, 58 301 180 & 58 302 180. Hansgrohe Exafill bath filler, waste & overflow set: 58 127 xxx, 58 128 xxx, 58 300 xxx Axor Finish Set, 58 303 xxx Axor Complete Set & 58 123 xxx Hansgrohe Complete Set. ‘xxx’ denotes finish, and can be replaced with: -000 Chrome -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905001

Floor mounted single hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0465 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905001
Expiry date:
31/05/2024
Size:
½” BSP (M)
Marking:
Hansgrohe on front of Body
Installation Requirements:
R001 R010 R040
Model:
72 412 xxx HG Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905018

Concealed, floor mounting basic set with DZR brass body for use with floor standing bath mixers. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
1905018
Expiry date:
31/05/2024
Size:
½” BSP (F)
Marking:
Hansgrohe and DR on body
Installation Requirements:
R001 R010
Model:
10 452 180 Axor Starck
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905003

Range of wall mounted, concealed, manual blending shower valves with brass bodies (various finishes), incorporating a ceramic cartridge headwork and various single lever operating members. The product is also supplied with ¾” BSP (M) x ½” BSP (F) adaptors. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
1905003
Expiry date:
31/05/2024
Note:
This approval does not include a shower hose and handset. The basic set is not approved in its own right.
Size:
¾” BSP (F)
Marking:
AXOR on wall plate.
Model:
Basic set: 01 800 180 ibox universal Finish sets: 10 615 xxx Axor Starck (single lever operating member) 10 616 xxx Axor Starck (single lever operating member) 10 645 xxx Axor Starck X (single lever operating member) 11 625 xxx Axor Urquiola (single lever operating member) 12 605 xxx Axor Starck Organic (dome type operating member) 14 165 xxx Hansgrohe Talis Classic (single lever operating member) 15 665 xxx Hansgrohe PuraVida (single lever operating member) 18 655 xxx Axor Massaud (dome type operating member) 31 456 xxx Hansgrohe Metris (single lever operating member) 31 665 xxx Hansgrohe Metris S (single lever operating member) 31 685 xxx Hansgrohe Metris (single lever operating member) 31 965 xxx Hansgrohe Focus (single lever operating member) 32 675 xxx Hansgrohe Talis S (single lever operating member) 34 625 xxx Axor Citterio M (single lever operating member) 39 655 xxx Axor Citterio (single lever operating member) 71 605 xxx Hansgrohe Logis (single lever operating member). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905040

Range of thermostatic cartridges with plastic bodies, plastic strainers and EPDM ‘O’-rings. For insertion into specifically dimensioned bores. Maximum operating temperature 80°C.

Section:
0442 Thermostatic cartridges
WRAS Approval Number:
1905040
Expiry date:
31/05/2024
Size:
Ø 30mm
Marking:
HG on body.
Installation Requirements:
R001
Model:
30 615 900 Thermostatic Cartridge T32K & 31 615 900 Thermostatic Cartridge T32K
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905050

Single hole, single outlet (swivel) combination tap assembly with brass body (various finishes). Incorporating a ceramic cartridge headwork with a joystick type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905050
Expiry date:
31/05/2024
Size:
Stainless steel braided PEX lined hose assemblies incorporating ⅜” captive nut end connections
Marking:
AXOR on front of body
Installation Requirements:
R001 R006 R009 R010
Model:
10 801 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905054

Range of chromium plated plastic bodied or brass bodied (28 489 xxx model) overhead shower outlets. The 27 405 xxx model is supplied with a ceiling mounted shower arm and the 27 424 xxx models with a wall mounted shower arm, both are chromium plated brass. All shower outlets incorporate a combined EPDM washer and plastic strainer on the inlet. Maximum operating temperature 70°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1905054
Expiry date:
31/05/2024
Size:
Hansgrohe Raindance models: ½” BSP (M). Axor Carlton & Citterio models: ½” BSP (F).
Marking:
Hansgrohe or Axor on showerhead.
Installation Requirements:
R001 R040
Model:
27 405 xxx Hansgrohe Raindance C 240 AIR Overhead shower. 27 424 xxx Hansgrohe Raindance C 240 AIR Overhead shower. 28 474 xxx Axor Carlton Overhead shower. 28 487 xxx Axor Carlton Overhead shower. 28 489 xxx Axor Citterio Overhead shower. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe Wasselonne S.A.S
Company Name
Hansgrohe Wasselonne S.A.S
Address
Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company

Print This Approval


#1905069

Wall mounted, concealed, thermostatic blending valves with brass body (various finishes). The temperature is controlled via a thermostatic cartridge with a single lever operating member incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1905069
Expiry date:
31/05/2024
Note:
The 01 800 180 iBox universal basic set is not approved in its own right.
Size:
¾” BSP (F) inlet and outlet
Marking:
AXOR, Hansgrohe on face plate
Installation Requirements:
R001 R010 R040
Model:
16 823 xxx Axor Montreux Finish Set Thermostatic Mixer For use with Basic set: 01 800 180 iBox universal Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1910700

Single hole, single outlet (swivel) combination tap assemblies (various finishes), incorporating half turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts and a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1910700
Expiry date:
31/10/2024
Note:
No testing performed on pop-up waste.
Size:
10mm compression
Marking:
AXOR on front base of body
Installation Requirements:
R001 R006 R010
Model:
17 030 xxx AXOR Carlton Where xxx denotes finish available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905065

Range of overhead shower outlets with brass bodies (various finishes). Maximum operating temperature 60°C

Section:
1650 Shower Outlets
WRAS Approval Number:
1905065
Expiry date:
31/05/2024
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
Hansgrohe on face of shower
Installation Requirements:
R001 R040
Model:
Hansgrohe Raindance Select E 27 384 xxx & 27 385 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe Wasselonne S.A.S
Company Name
Hansgrohe Wasselonne S.A.S
Address
Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company

Print This Approval


#1905047

Range of single hole, single outlet (swivel) combination tap assembly with brass body (various finishes). Incorporating ceramic cartridge headworks and single lever operating member. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905047
Expiry date:
31/05/2024
Size:
Stainless steel braided thermoplastic silicone lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
AXOR on base of body.
Installation Requirements:
R001 R006 R009 R010
Model:
14 850 XXX AXOR UNO SINGLE LEVER KITCHEN MIXER Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1905045

Deck mounted three-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating quarter turn ceramic disc headworks with dome type operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste and stainless steel braided PEX lined flexible connecting hose assemblies, (to be installed between the side valves and the spout). Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
1905045
Expiry date:
31/05/2024
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” captive nut end connections.
Marking:
Hansgrohe on spout
Installation Requirements:
R001 R006 R007 R009 R010
Model:
71 133 xxx Hansgrohe Logis 3-hole basin mixer 150 with pop-up waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1906013

Range of wall mounted exposed thermostatic shower mixing valve with brass bodies (various finish) incorporating a ceramic disc headwork which controls the flow with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Model 13108 incorporates a manual diverter headwork which controls flow and diverts water to either handset or shower head with a dome type operating member. The inlets incorporate stainless steel strainers and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1906013
Expiry date:
30/06/2024
Note:
This approval does not include a shower hose or handset.
Size:
½” BSP (M)
Marking:
Hansgrohe on front of valve body.
Installation Requirements:
R001 R010 R040
Model:
13 102 xxx Hansgrohe ShowerTablet 350 & 13 108 xxx Hansgrohe ShowerTablet 600 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1906018

Range of two-hole, wall mounted, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1906018
Expiry date:
30/06/2024
Note:
The basic sets are not approved in their own right.
Size:
½” BSP (F)
Marking:
AXOR on operating member.
Installation Requirements:
R001 R010 R040
Model:
38 121 xxx Axor Uno & 38 122 xxx Axor Uno finish sets for use with 13622180+13623180 basic sets. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. .
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1906035

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members. The spout outlets incorporate plastic/rubber aerators. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
1906035
Expiry date:
30/06/2024
Size:
½” BSP (F)
Marking:
Axor on spout.
Installation Requirements:
R001 R010 R040
Model:
Basic set (concealed part): 10 303 180 Axor for use with trim sets: 10 313 xxx Axor Starck 3 16 532 xxx Axor Montreux 16 534 xxx Axor Montreux, 39 143 xxx Axor Citterio 39 147 xxx Axor Citterio 39 313 xxx Axor Citterio 39 315 xxx Axor Citterio 39 144 xxx Axor Citterio 39 148 xxx Axor Citterio 39 314 xxx Axor Citterio 39 316 xxx Axor Citterio Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 21

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.