Hansgrohe SE Approvals


#2009007

Range of exposed wall mounted two-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a two-way manual diverter controlling and diverting the flow between the spout outlet and an overhead shower (not supplied) and a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a single lever operating member incorporating a manual override button. The inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2009007
Expiry date:
30/09/2025
Size:
½” BSP (M)
Marking:
Hansgrohe on front of body.
Installation Requirements:
R001 R010 R040
Model:
13 107 xxx Hansgrohe ShowerTablet 350 Exposed Thermostatic Bath Mixer 13 109 xxx Hansgrohe ShowerTablet 600 Exposed Thermostatic Bath Mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2010002

Pillar tap with brass body (various finishes), incorporating a quarter turn ceramic disc headwork and cross top operating member. The spout outlet incorporates an aerator. Maximum working pressure 10.0 bar. Maximum operating temperature is 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
2010002
Expiry date:
31/10/2025
Size:
3/8” (F) Compression
Marking:
AXOR on body.
Installation Requirements:
R001 R006
Model:
16 530 xxx AXOR Montreux Pillar tap 50 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2009004

Range of ceramic cartridge headworks incorporating plastic bodies and silicone ‘O’-rings, to be inserted into specifically dimensioned bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 70°C.

Section:
0440 Headworks
WRAS Approval Number:
2009004
Expiry date:
30/09/2025
Size:
25mm Ø
Marking:
HG on body
Installation Requirements:
R001
Model:
30 579 600 HG Mixing cartridge M25 30 122 100 HG Mixing cartridge M25L 30 122 101 HG Mixing cartridge M25LA Models added April 2021: 30 746 700 Cartridge M25LS 30 333 001 Cartridge M25LXS
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2011009

Thermostatic blending valve with brass body (various finishes), incorporating two push cartridges to control the water to the 2 outlets independently. The temperature is controlled also controlled independently via a thermostatic cartridge with a dome operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2011009
Expiry date:
30/11/2025
Size:
¾” BSP (F)
Marking:
Hansgrohe on face plate.
Installation Requirements:
R001 R010 R040
Model:
15 765 xxx Hansgrohe ShowerSelect Thermostat Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2011010

Three-hole, single outlet, fixed combination tap assembly with a brass body (various finishes), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with lever type pop-up waste and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2011010
Expiry date:
30/11/2025
Size:
Stainless steel braided, thermoplastic silicone rubber (TPSiV) lined flexible hose with 3/8” BSP captive nut.
Marking:
Hansgrohe on body.
Installation Requirements:
R001 R006 R009 R010
Model:
31 073 xxx Hansgrohe Metris Classic 3-hole basin mixer 100 with pop-up waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2011306

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating a ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Product is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011306
Expiry date:
30/11/2025
Note:
No testing has bee performed on the pop-up waste.
Size:
Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R006 R009 R010
Model:
71164xxx - Hansgrohe Logis E OHM 70 CoolStart. 71165xxx - Hansgrohe Logis E OHM 100 CoolStart. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2011011

Wall mounted, exposed manual blending valve with brass body (various finishes) incorporating a ceramic cartridge headwork, which controls both temperature and flow and has a single lever operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
2011011
Expiry date:
30/11/2025
Size:
¾” to ½” Offset Unions.
Marking:
Hansgrohe on body.
Installation Requirements:
R001 R010 R040
Model:
15 672 xxx Hansgrohe PuraVida Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2011012

Single hole, single outlet (waterfall spout) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The inlets incorporate a stainless-steel strainer and the product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011012
Expiry date:
30/11/2025
Size:
Stainless steel braided PEX lined flexible hose assemblies with 3/8” captive nuts.
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R006 R009 R010 R160
Model:
14 127 xxx Hansgrohe Talis Classic Single lever basin mixer 90 with pop-up waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2011014

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Products come with pop up wastes. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011014
Expiry date:
30/11/2025
Note:
No testing performed on the pop-up waste.
Size:
Stainless steel or nylon braided PEX lined flexible hoses with 3/8” BSP (M) captive nut connections.
Marking:
AXOR on body.
Installation Requirements:
R001 R006 R009 R010
Model:
34 010 xxx AXOR Citterio M with pop-up waste set 34 016 xxx AXOR Citterio M with pop-up waste set 34 017 xxx AXOR Citterio M with waste set 34 127 xxx AXOR Citterio M with waste set.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#2011015

Range of shower handsets, various finishes. All models incorporate a stainless-steel strainer in the inlet. The inlet of model 26 090 also incorporates a plastic flow regulator. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
2011015
Expiry date:
30/11/2025
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Hansgrohe on body.
Installation Requirements:
R001 R040
Model:
Vernis Blend Hand shower Vario range: 26 090 xxx. 26 270 xxx. 26 340 xxx EcoSmart. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 9 of 40

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.