Range of wall mounted thermostatic shower valves with brass bodies (various finishes) Incorporating ceramic disc headworks, and dome type operating members and a self cancelling diverter to the shower outlets. The temperature is controlled independently via a thermostatic cartridge and dome type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. The inlet to the overhead shower incorporates a plastic flow regulator. Inlets to the main body incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

1910323

Expiry date:

31/10/2024

Size:

¾” x ½” BSP(M) off set union.

Marking:

Hansgrohe logo on handshower and valve body.

Installation Requirements:

R001 R030

Model:

27 298 xxx Crometta Showerpipe 240 1jet 27 320 xxx Crometta Showerpipe 240 1jet Where xx denotes the surface finish (which is a non-water contact part). It will always be 2 digits, which can be any combination of numbers, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of wall and deck mounted spout outlets (brass body with various finishes), incorporating a plastic aerator (19 415 xxx model) or an aerator comprising of a plastic housing and rubber aerator outlet (all other models with the exception of the 10 426 xxx model). Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlets.

WRAS Approval Number:

2001055

Expiry date:

31/01/2025

Note:

Open outlet use only.

Size:

¾” BSP (M)

Marking:

10 426 – Axor & Hansgrohe on Spout 13 413 – Hansgrohe on Spout 31 494 – Hansgrohe on Spout Bezzel 13 414 – Hansgrohe on Spout 14 420 – Hansgrohe on Spout 19 415 – Axor, Hansgrohe & Bourellec on Spout 38 410 – Axor & Uno on Spout

Installation Requirements:

R001 R040

Model:

10 426 xxx Axor Starck Bath Spout 13 413 xxx Hansgrohe Metris Bath Spout 31 494 xxx Hansgrohe Metris Bath Spout 13 414 xxx Hansgrohe Bath Spout 14 420 xxx Hansgrohe Metropol S Bath Spout 19 415 xxx Axor Bouroullec Bath Spout 38 410 xxx Axor Uno Bath Spout Where xxx denotes finish and can be replaced with: -000 Chrome -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Deck mounted spout outlet (brass body with various finishes), incorporating a plastic aerator. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlets.

WRAS Approval Number:

2001106

Expiry date:

31/01/2025

Note:

Open outlet use only.

Size:

¾” BSP (M)

Marking:

19 417 – Axor, Hansgrohe & Bourellec on Spout

Installation Requirements:

R001 R006

Model:

19 417 xxx Axor Bouroullec Bath Spout Where xxx denotes finish and can be replaced with: -000 Chrome -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of three hole, single outlet (fixed) combination tap assemblies (having various finishes). Incorporating quarter turn ceramic disc headworks and single lever operating members. The outlet is connected via stainless steel braided PE-X lined interconnecting hoses. The spout outlet incorporates a plastic aerator. The product is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole, metal, single outlet, fixed.

WRAS Approval Number:

2001334

Expiry date:

31/01/2025

Size:

½” BSP (F)

Marking:

Axor on spout

Installation Requirements:

R001 R006 R007 R010

Model:

46 050 xx0 Axor Edge 46 051 xx0 Axor Axor Edge

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Single hole, single outlet (fixed) combination tap assembly (various finishes), incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a rubber aerator. Product is supplied with a lever type pop-up waste Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001090

Expiry date:

31/01/2025

Size:

Stainless steel PEX lined flexible hose with 3/8” BSP captive nut end connections

Marking:

AXOR on front of tap body

Installation Requirements:

R001 R006 R009 R010

Model:

10 015 xxx Available in customised finishes ‘xxx’ denotes the finish: - 000 Chrome - 020 PVD polished chrome - 260 PVD Brushed chrome - 830 PVD Polished nickel - 820 PVD Brushed nickel - 990 PVD Polished gold optic - 250 PVD Brushed gold optic - 300 PVD Polished red gold - 310 PVD Brushed red gold - 130 PVD Polished bronze - 140 PVD Brushed bronze - 330 PVD Polished black chrome - 340 PVD Brushed Black chrome - 930 PVD Polished brass - 950 PVD Brushed brass - 800 PVD stainless steel optic

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, multiple finishes), incorporating a ceramic cartridge headworks and a single lever operating member. The spout outlet incorporates a rubber aerator and the products are supplied with a pop-up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2003007

Expiry date:

31/03/2025

Note:

No testing has been performed on the pop-up waste.

Size:

Stainless Steel braided PEX lined flexible hose assemblies with ⅜" BSP captive nut connections.

Marking:

AXOR on front of body.

Installation Requirements:

R001 R006 R009 R010

Model:

17 010 xxx 17 010 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers, as examples: 000 = chrome finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (various finishes, see model), incorporating a quarter turn ceramic disc headwork with cross top or dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60 °C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2003052

Expiry date:

31/03/2025

Size:

stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜" BSP captive nut end connections.

Marking:

Hansgrohe on front of body

Installation Requirements:

R001 R006 R009 R010

Model:

71 280 xxx Logis M31 2-handle kitchen mixer 220 (Dome) 71 285 xxx Logis M32 Classic 2-handle kitchen mixer 220 (Cross) Model added February 2021: 71 283 xxx Logis M32 2-handle kitchen mixer 220 Eco Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD Stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Vor Heubach 1 D-77761 Schiltach

View All Listings by this Company

Range of concealed, thermostatic blending valves (brass body). The flow is controlled via ‘detent’ (push to on push to off) headworks. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2004021

Expiry date:

30/04/2025

Note:

The Hansgrohe iBox 01800180 is not covered by this approval.

Size:

Body for insertion into Hansgrohe iBox 01800180 (not supplied)

Marking:

AXOR on faceplate

Installation Requirements:

R001 R010 R040

Model:

36 707 xxx Axor ShowerSelect 36 715 xxx Axor ShowerSelect 36 723 xxx Axor ShowerSelect Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of shower handsets with chromium plated bodies. The products incorporate a strainer (stainless steel or plastic) at the inlet. All models, except 28 539 xxx, incorporate a plastic flow regulator at the inlet. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

WRAS Approval Number:

2004024

Expiry date:

30/04/2025

Note:

Open outlet use only. Claims of flow rate are made by the manufacturer and not considered part of the listing.

Size:

½” BSP (M).

Marking:

Hansgrohe, Croma and NF logo on body.

Installation Requirements:

R001 R040

Model:

28 535 xxx Hansgrohe Croma 100 Vario hand shower. 28 537 xxx Hansgrohe Croma 100 Vario hand shower EcoSmart 9 l/min. 28 536 xxx Hansgrohe Croma 100 Multi hand shower . 28 538 xxx Hansgrohe Croma 100 Multi hand shower EcoSmart 9 l/min. 28 539 xxx Hansgrohe Croma 100 Classic Multi hand shower. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of overhead shower outlets (various finishes) and concealed installation sets. Models 24 006 400, 24 016 400, 24 017 400, 35 281 xxx and 35 282 xxx incorporate a stainless-steel strainer on the inlet of and a plastic aerator on the shower head outlet. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2004026

Expiry date:

30/04/2025

Note:

Open outlet use only. The concealed installation sets are not approved in their own right.

Size:

½” BSP (M). ¾” BSP x ½” adapter.

Marking:

Hansgrohe on shower plate.

Installation Requirements:

R001 R040

Model:

Models for use with concealed installation set 24 010 180 Hansgrohe Rainmaker Select Basic: 24 006 400 Hansgrohe Rainmaker Select 460. 24 006 600 Hansgrohe Rainmaker Select 460. 24 016 400 Hansgrohe Rainmaker Select 460. 35 281 xxx AXOR ShowerSolutions Overhead shower 460/300. Models for use with concealed installation set 01800180: 24 007 400 Hansgrohe Rainmaker Select 460. 24 007 600 Hansgrohe Rainmaker Select 460. 24 017 400 Hansgrohe Rainmaker Select 460. 35 276 xxx AXOR ShowerSolutions Overhead shower 460/300. 35 282 xxx AXOR ShowerSolutions Overhead shower 460/300. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company