Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1907354

Expiry date:

31/07/2024

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

AXOR logo on body

Installation Requirements:

R001 R006 R009 R010

Model:

46 010 xxx AXOR 46 011 xxx AXOR 46 030 xxx AXOR 46 031 xxx AXOR Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of floor mounted, single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and is supplied with a click type waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1907355

Expiry date:

31/07/2024

Note:

10 452 180 AXOR Starck basic set floor standing is not approved in its own right.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

AXOR logo on body

Installation Requirements:

R001 R010 R040

Model:

10 452 180 AXOR Starck basic set floor standing to be installed in conjunction with: 46 040 xxx AXOR Edge Single lever basin mixer floor standing with push-open waste set 46 041 xxx AXOR Edge Single lever basin mixer floor standing with push-open waste set - diamond cut Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Ceramic mixing cartridge with plastic bodies and rubber ‘O’ rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:

0440 Headworks

WRAS Approval Number:

1909050

Expiry date:

30/09/2024

Size:

32mm

Marking:

Hansgrohe on body.

Installation Requirements:

R001

Model:

30731900 mixing cartridge M32

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company

Range of single hole, single outlet fixed combination tap assemblies (various finishes) incorporating quarter turn ceramic disc headworks with dome type operating members. The temperature is controlled via a thermostatic mixing cartridge with dome type operating member. The spout outlet incorporates an adjustable rubber spray insert. The inlet hoses each incorporate a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1909051

Expiry date:

30/09/2024

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PE-X lined flexible hose assemblies with ⅜” captive nut end connections.

Marking:

AXOR on body.

Installation Requirements:

R001 R006 R009 R010

Model:

12 010 xxx Axor Starck Organic 2-handle basin mixer 80 with pop-up waste set 12 011 xxx Axor Starck Organic 2-handle basin mixer 80 without pull-rod 12 012 xxx Axor Starck Organic 2-handle basin mixer 170 without pull-rod for wash bowls 12 013 xxx Axor Starck Organic 2-handle basin mixer 240 without pull-rod for wash bowls 12 014 xxx Axor Starck Organic 2-handle basin mixer 50 with pop-up waste set for hand wash basins available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of four hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling lockable diverter to shower outlet. The spout outlet incorporates a plastic aerator. The products are supplied with a shower hose and handset. The shower handset inlet incorporates a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C

Section:

0680 Combination Tap Assemblies

Section Subtitle:

Four hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.

WRAS Approval Number:

1909075

Expiry date:

30/09/2024

Note:

The 13 244 180 rough in set is not approved in its own right

Size:

½” BSP (M)

Marking:

Hansgrohe on spout and shower handset.

Installation Requirements:

R001 R006 R020

Model:

71 748 000 Hansgrohe Talis E 4-hole rim-mounted bath mixer. 72 419 000 Hansgrohe Talis S 4-hole rim-mounted bath mixer. Both are to be installed with the 13 244 180 rough in set.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of concealed thermostatic shower mixers (brass bodies - various finishes). The flow is controlled by a four-way manual diverter (3 on, 1 off positions) with single lever, cube type or dome type operating members (depending on model). The temperature is controlled independently via a thermostatic cartridge with single lever, cube type, dome type or cross top operating members (depending on model). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

1909088

Expiry date:

30/09/2024

Note:

This approval does not include a shower hose and handset The 01 800 180 concealed installation set is not approved in its own right.

Size:

½” BSP (F)

Marking:

AXOR on faceplate

Installation Requirements:

R001 R010 R040

Model:

Concealed installation set 01 800 180 for use with finish sets: 10 720 xxx AXOR Starck 10 726 xxx AXOR Starck X 11 733 xxx AXOR Urquiola 12 716 xxx AXOR Starck Organic 15 771 xxx Hansgrohe PuraVida 16 820 xxx AXOR Montreux 16 821 xxx AX Montreux 17 725 xxx AXOR Carlton 18 750 xxx AXOR Massaud 34 725 xxx AXOR Citterio M 38 720 xxx AXOR Uno 39 720 xxx AXOR Citterio 39 725 xxx AXOR xxx denotes the finish and is replaced with: 000 – Chrome 020 – PVD polished chrome 260 – PVD brushed chrome 830 – PVD polished nickel 820 – PVD brushed nickel 990 – PVD polished gold optic 250 – PVD brushed gold optic 300 – PVD polished red gold 310 – PVD brushed red gold 130 – PVD polished bronze 140 – PVD brushed bronze 330 – PVD polished black chrome 340 – PVD brushed black chrome 930 – PVD polished brass 950 – PVD brushed brass 800 – PVD stainless steel optic

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of wall mounted, two hole, single outlet (fixed) combination tap assemblies (brass body - various finishes) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter. The shower outlet connection incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.

WRAS Approval Number:

1907356

Expiry date:

31/07/2024

Note:

This approval does not include a shower hose and handset, overhead shower or bath spout.

Size:

¾” BSP (F)

Marking:

AXOR on face plate

Installation Requirements:

R001 R010 R040

Model:

46 420 xx0 AXOR Edge Single lever bath mixer for concealed installation with integrated security combination, 46 421 xx0 AXOR Edge Single lever bath mixer for concealed installation with integrated security combination – Diamond cut, 46 450 xx0 AXOR Edge Single lever bath mixer for concealed installation, 46 451 xx0 AXOR Edge Single lever bath mixer for concealed installation – Diamond cut. To be used in conjuction with I-Box 01700180 Where xx denotes the surface finish, which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manual, click type cartridge headwork with a plastic body, EPDM ‘O’ rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0440 Headworks

WRAS Approval Number:

1909333

Expiry date:

30/09/2024

Size:

24mm OD

Marking:

Hansgrohe, model & technical information on body.

Installation Requirements:

R001

Model:

95758000

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Raindance Select E range of wall ceiling or wall mounted shower outlets having brass bodies. Maximum operating temperature 70°C

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

1910321

Expiry date:

31/10/2024

Size:

½” BSP(M)

Marking:

Hansgrohe on body

Installation Requirements:

R001 R040

Model:

26 608 xxx Hansgrohe Raindance Select E overhead shower 300 2jet EcoSmart. 26 609 xxx Hansgrohe Raindance Select E overhead shower 300 2jet EcoSmart. ‘xxx’ denotes the finish which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of handshowers having a plastic body (with various finishes) EPDM ‘o’ rings. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

1910325

Expiry date:

31/10/2024

Note:

Open outlet use only

Size:

½” BSP (M)

Marking:

AXOR on body

Installation Requirements:

R001 R040

Model:

45 720 xxx Axor one hand shower 2jet Where xxx denotes the surface finish, which can be replaced by: -000 Chrome/Mirror Glass -350 Satin black/black -360 Satin black/Brushed bronce -600 Chrome/Black Glass -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic -670 matt black, -700 matt white

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company