Range of combined bath filler, waste and overflow assemblies (in various finishes with a plastic body). The outlets incorporate plastic aerator. Maximum operating temperature 70°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

1905384

Expiry date:

31/05/2024

Note:

Open outlet use only. For domestic use IRN R160 applies. For non-domestic use IRN 090 applies.

Size:

30.23mm

Marking:

Axor logo on faceplate

Installation Requirements:

R001 R160

Model:

Hansgrohe Exafill basic sets: 58 125 180, 58 126 180, 58 301 180 & 58 302 180. Hansgrohe Exafill bath filler, waste & overflow set: 58 127 xxx, 58 128 xxx, 58 300 xxx Axor Finish Set, 58 303 xxx Axor Complete Set & 58 123 xxx Hansgrohe Complete Set. ‘xxx’ denotes finish, and can be replaced with: -000 Chrome -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Floor mounted single hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with single lever operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

0465 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1905001

Expiry date:

31/05/2024

Size:

½” BSP (M)

Marking:

Hansgrohe on front of Body

Installation Requirements:

R001 R010 R040

Model:

72 412 xxx HG Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Concealed, floor mounting basic set with DZR brass body for use with floor standing bath mixers. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

1905018

Expiry date:

31/05/2024

Size:

½” BSP (F)

Marking:

Hansgrohe and DR on body

Installation Requirements:

R001 R010

Model:

10 452 180 Axor Starck

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of wall mounted, concealed, manual blending shower valves with brass bodies (various finishes), incorporating a ceramic cartridge headwork and various single lever operating members. The product is also supplied with ¾” BSP (M) x ½” BSP (F) adaptors. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

2000 Valves

Section Subtitle:

Blending, manually operated.

WRAS Approval Number:

1905003

Expiry date:

31/05/2024

Note:

This approval does not include a shower hose and handset. The basic set is not approved in its own right.

Size:

¾” BSP (F)

Marking:

AXOR on wall plate.

Model:

Basic set: 01 800 180 ibox universal Finish sets: 10 615 xxx Axor Starck (single lever operating member) 10 616 xxx Axor Starck (single lever operating member) 10 645 xxx Axor Starck X (single lever operating member) 11 625 xxx Axor Urquiola (single lever operating member) 12 605 xxx Axor Starck Organic (dome type operating member) 14 165 xxx Hansgrohe Talis Classic (single lever operating member) 15 665 xxx Hansgrohe PuraVida (single lever operating member) 18 655 xxx Axor Massaud (dome type operating member) 31 456 xxx Hansgrohe Metris (single lever operating member) 31 665 xxx Hansgrohe Metris S (single lever operating member) 31 685 xxx Hansgrohe Metris (single lever operating member) 31 965 xxx Hansgrohe Focus (single lever operating member) 32 675 xxx Hansgrohe Talis S (single lever operating member) 34 625 xxx Axor Citterio M (single lever operating member) 39 655 xxx Axor Citterio (single lever operating member) 71 605 xxx Hansgrohe Logis (single lever operating member). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of thermostatic cartridges with plastic bodies, plastic strainers and EPDM ‘O’-rings. For insertion into specifically dimensioned bores. Maximum operating temperature 80°C.

Section:

0442 Thermostatic cartridges

WRAS Approval Number:

1905040

Expiry date:

31/05/2024

Size:

Ø 30mm

Marking:

HG on body.

Installation Requirements:

R001

Model:

30 615 900 Thermostatic Cartridge T32K & 31 615 900 Thermostatic Cartridge T32K

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly with brass body (various finishes). Incorporating a ceramic cartridge headwork with a joystick type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1905050

Expiry date:

31/05/2024

Size:

Stainless steel braided PEX lined hose assemblies incorporating ⅜” captive nut end connections

Marking:

AXOR on front of body

Installation Requirements:

R001 R006 R009 R010

Model:

10 801 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of chromium plated plastic bodied or brass bodied (28 489 xxx model) overhead shower outlets. The 27 405 xxx model is supplied with a ceiling mounted shower arm and the 27 424 xxx models with a wall mounted shower arm, both are chromium plated brass. All shower outlets incorporate a combined EPDM washer and plastic strainer on the inlet. Maximum operating temperature 70°C.

Section:

1650 Shower Outlets

WRAS Approval Number:

1905054

Expiry date:

31/05/2024

Size:

Hansgrohe Raindance models: ½” BSP (M). Axor Carlton & Citterio models: ½” BSP (F).

Marking:

Hansgrohe or Axor on showerhead.

Installation Requirements:

R001 R040

Model:

27 405 xxx Hansgrohe Raindance C 240 AIR Overhead shower. 27 424 xxx Hansgrohe Raindance C 240 AIR Overhead shower. 28 474 xxx Axor Carlton Overhead shower. 28 487 xxx Axor Carlton Overhead shower. 28 489 xxx Axor Citterio Overhead shower. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe Wasselonne S.A.S

Company Name

Hansgrohe Wasselonne S.A.S

Address

Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company

Wall mounted, concealed, thermostatic blending valves with brass body (various finishes). The temperature is controlled via a thermostatic cartridge with a single lever operating member incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

1905069

Expiry date:

31/05/2024

Note:

The 01 800 180 iBox universal basic set is not approved in its own right.

Size:

¾” BSP (F) inlet and outlet

Marking:

AXOR, Hansgrohe on face plate

Installation Requirements:

R001 R010 R040

Model:

16 823 xxx Axor Montreux Finish Set Thermostatic Mixer For use with Basic set: 01 800 180 iBox universal Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assemblies (various finishes), incorporating half turn ceramic disc headworks with cross top operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts and a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1910700

Expiry date:

31/10/2024

Note:

No testing performed on pop-up waste.

Size:

10mm compression

Marking:

AXOR on front base of body

Installation Requirements:

R001 R006 R010

Model:

17 030 xxx AXOR Carlton Where xxx denotes finish available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of overhead shower outlets with brass bodies (various finishes). Maximum operating temperature 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

1905065

Expiry date:

31/05/2024

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

Hansgrohe on face of shower

Installation Requirements:

R001 R040

Model:

Hansgrohe Raindance Select E 27 384 xxx & 27 385 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe Wasselonne S.A.S

Company Name

Hansgrohe Wasselonne S.A.S

Address

Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company