Hansgrohe SE Approvals


#1907700

Ceramic cartridge headwork with a plastic body and EPDM seals for insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 Bar. Maximum operating temperature 80°C

Section:
0440 Headworks
WRAS Approval Number:
1907700
Expiry date:
31/07/2024
Size:
Ø 27mm
Marking:
Hansgrohe on body
Installation Requirements:
R001
Model:
30 614 320 - J27Joystick mixing cartridge.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903005

Range of wall mounted, manually operated blending valves with brass bodies (various finishes), incorporating ceramic cartridge headworks and various single lever operating members. The products also incorporate a self-cancelling diverter. Models listed are trim and finish sets, intended for use with the Hansgrohe iBox (01 800 180 or 01 810 180). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2000 Valves
Section Subtitle:
Blending, manually operated.
WRAS Approval Number:
1903005
Expiry date:
31/03/2024
Note:
Not supplied with shower hose and handset. The Hansgrohe iBox is not covered by this approval.
Size:
Body for insertion into Hansgrohe iBox.
Marking:
Hansgrohe and/or AXOR on wall-plate and/or operating member.
Installation Requirements:
R001 R030
Model:
10 415 xxx - AXOR Starck Classic, 10 416 xxx - AXOR Starck, 10 445 xxx - AXOR Starck X, 11 425 xxx - Urquiola, 12 415 xxx - AXOR Starck Organic, 14 145 xxx - Hansgrohe Talis, 15 445 xxx - Hansgrohe PuraVida, 17 415 xxx - AXOR Carlton, 18 455 xxx - Massaud, 31 454 xxx - Hansgrohe Metris, 31 465 xxx - Hansgrohe Metris S, 31 485 xxx - Hansgrohe Metris Classic, 31 493 xxx - Hansgrohe Metris, 31 945 xxx - Hansgrohe Focus, 32 475 xxx - Hansgrohe Talis S, 34 425 xxx - AXOR Citterio M, 39 455 xxx - AXOR Citterio & 71 405 xxx - Hansgrohe Logis Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Factor:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903001

Range of concealed rough-in sets with brass bodies, intended for use in conjunction with trim and finish sets. The products incorporate elbow fittings. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
1903001
Expiry date:
31/03/2024
Size:
½” BSP (F)
Marking:
Hansgrohe, AXOR and model on adhesive label on the body.
Installation Requirements:
R001 R040
Model:
13 129 180 - Hansgrohe ShowerTablet 600 & 45 442 180 - Axor Thermostat 800
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903002

‘Hansgrohe Raindance E’ range of overhead shower outlets with brass bodies (various finishes), incorporating a stainless-steel strainer. Model 26 253 xxx also incorporates a plastic flow regulator. Models listed are intended for use in conjunction with basic set for Raindance E (26 254 180) Maximum operating temperature 60ºC.

Section:
1650 Shower Outlets
WRAS Approval Number:
1903002
Expiry date:
31/03/2024
Note:
Open outlet use only. Raindance E basic set (26 254 180)
Size:
½” BSP (M)
Marking:
Hansgrohe on shower plate.
Installation Requirements:
R001 R007 R040
Model:
Hansgrohe Raindance E 400: 26 252 xxx & 26 253 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1904703

Range of two hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks with various single lever operating members. The spout outlets incorporate a plastic flow straightener and a stainless steel strainer. The product is supplied with metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1904703
Expiry date:
30/04/2024
Size:
¾” BSP (M)
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R005 R010
Model:
31 423 xxx - Hansgrohe Metris, 31 427 xxx - Hansgrohe Talis & 31 523 xxx - Hansgrohe Focus. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903006

‘Hansgrohe Metris’ range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1903006
Expiry date:
31/03/2024
Size:
Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Hansgrohe Base (front) of body.
Installation Requirements:
R001 R006 R009 R010
Model:
Hansgrohe Metris Range: 14 823 xxx & 14 822 800 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903007

Wall mounted, two hole, single outlet (swivel) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork and joystick operating member. The spout outlet incorporates a plastic aerator. The spout outlet connections also incorporate a plastic flow regulator and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. The model listed is a spout and finish set intended for use with basic rough-in sets (13622180/13623180). The spout outlet incorporates a plastic flow regulator with stainless steel strainer. Maximum working pressure 10.0 bBar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1903007
Expiry date:
31/03/2024
Note:
Basic rough-in sets 13622180 & 13623180 are not covered by the scope of this approval.
Size:
½” BSP (F)
Marking:
AXOR at Base of swivel
Installation Requirements:
R001 R010 R040
Model:
38 815 xxx - Axor Uno² Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903008

Single hole single outlet (swivel) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headworks with single lever operating member. The spout outlet incorporates a plastic aerator. Product is supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1903008
Expiry date:
31/03/2024
Note:
No testing performed on the pop up waste
Size:
Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Hansgrohe on base of tap
Installation Requirements:
R001 R006 R009 R010
Model:
72 105 xxx - Hansgrohe Talis S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903009

‘Starck’ range of metal effect shower hoses in a variety of finishes, incorporating an LLDPE liner. Maximum operating temperature - 70°C

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
1903009
Expiry date:
31/03/2024
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
Axor on conical nut
Installation Requirements:
R001
Model:
28 282 xxx - AX Starck 1.25m, 30 469 418 - ISI-STARCK 1.25m, 28 286 xxx - AX Starck 1.60m, 30 477 218 - ISI-STARCK 1.60m & 28 284 xxx - AX Starck 2.00m. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval


#1903323

Chromium plated plastic shower handset (various finishes) with EPDM seals The inlet incorporates a plastic flow regulator and stainless-steel strainer. Maximum operating temperature 60°C. Open outlet use only.

Section:
1650 Shower Outlets
WRAS Approval Number:
1903323
Expiry date:
31/03/2024
Size:
½” BSP (M)
Marking:
Hansgrohe on body
Installation Requirements:
R001 R040
Model:
26 014 000 - Raindance S 120 3Jet P Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 41

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.