Lefroy Brooks Approvals


#2005019

Range of wall mounted, concealed thermostatic shower valves with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks controlling the flow with a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with cross top operating members incorporating a manual override button, the inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection and a stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
2005019
Expiry date:
31/05/2025
Size:
3/4” BSP (F)
Marking:
LB on front of operating member Lion logo on the underside of operating member
Installation Requirements:
R001 R040
Model:
8800 - Archipelago thermostatic temperature control valve 8706 - Concealed thermostatic valve 8736 - Concealed dual control thermostatic valve (vertical) 8737 - Concealed dual control thermostatic valve (horizontal) Models added June 15/06/2020: 5400 - Concealed thermostatic valve 5436 - Concealed dual control thermostatic valve (vertical)
Manufacturer:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Ibroc House Essex Road Hoddesdon
Postcode
EN11 0QS

View All Listings by this Company

Print This Approval


#2004900

BS EN 997(2012) Lefroy Brooks Classic Low Level W.C. Suite (Ceramic) incorporating a Thomas Dudley S44R Dual Flush Syphon with 1½’’ outlet (the flush volume is operated by the lever) and a Thomas Dudley 451 (bottom entry) diaphragm type float operated inlet valve which discharges via a Type AG air gap. The WC Suite complies with the requirements of a Type AUK 1 air gap. Maximum operating pressure 12.0 bar, cold water use only.

Section:
2041 WC suites
Section Subtitle:
Low level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:
2004900
Expiry date:
30/04/2025
Size:
½” BSP Plastic Inlet, 1½” BSP Plastic Outlet, Flushing Volumes 6L full flush 4L reduced flush.
Marking:
Lefroy Brooks glazed on front on cistern and LB logo glazed on bowl of pan
Installation Requirements:
R001 R280 R559
Model:
LEFROY BROOKS CLASSIC LOW LEVEL W.C. SUITE
Manufacturer:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Ibroc House Essex Road Hoddesdon
Postcode
EN11 0QS

View All Listings by this Company

Print This Approval


#2004901

BS EN 997(2012)Lefroy Brooks Classic High Level W.C. Suite (Ceramic) incorporating a Thomas Dudley Turbo 88R dual flush Syphon with 1½’’ outlet (the flush volume is operated by a fulcrum lever) and a Thomas Dudley 401 (side entry) diaphragm type float operated inlet valve which discharges via a Type AG air gap. The WC Suite complies with the requirements of a Type AUK 1 air gap. Maximum operating pressure 12.0 bar, cold water use only.

Section:
2042 WC suites
Section Subtitle:
High level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:
2004901
Expiry date:
30/04/2025
Size:
½” BSP Plastic Inlet, 1½” BSP Plastic Outlet, Flushing Volumes 6L full flush 4L reduced flush.
Marking:
Lefroy Brooks glazed on front on cistern and LB logo glazed on bowl of pan
Installation Requirements:
R001 R280 R559
Model:
LEFROY BROOKS CLASSIC HIGH LEVEL W.C. SUITE
Manufacturer:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Ibroc House Essex Road Hoddesdon
Postcode
EN11 0QS

View All Listings by this Company

Print This Approval


#2004902

BS EN 997 (2012) Lefroy Brooks Lissa Doon Close Coupled W.C. Suite (Ceramic) incorporating a Thomas Dudley T88R Dual Flush Syphon with 1½’’ outlet (, the flush volume is operated by a lever) and a Thomas Dudley 451 (bottom entry) diaphragm type float operated inlet valve which discharges via a Type AG air gap. The WC Suite complies with the requirements of a Type AUK 1 air gap. Maximum operating pressure 12.0 bar, cold water use only

Section:
2040 Valves
Section Subtitle:
Combined thermal, pressure relief and vacuum.
WRAS Approval Number:
2004902
Expiry date:
30/04/2025
Size:
½” BSP Plastic Inlet, 1½” BSP Plastic Outlet, Flushing Volumes 6L full flush 4L reduced flush.
Marking:
Lefroy Brooks glazed on front on cistern and LB logo glazed on bowl of pan
Installation Requirements:
R001 R280 R559
Model:
LEFROY BROOKS LISSA DOON CLOSE COUPLED W.C. SUITE
Manufacturer:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Ibroc House Essex Road Hoddesdon
Postcode
EN11 0QS

View All Listings by this Company

Print This Approval


#2004903

BS EN 997 (2012) Lefroy Brooks La Chapelle Low Level W.C. Suite (Ceramic) incorporating a Thomas Dudley T88R Dual Flush Syphon with 1½’’ outlet (the flush volume is operated by a lever) and a “Hydroflo” servo assisted (bottom entry) diaphragm type float operated inlet valve which discharges via a Type AG air gap. The WC Suite complies with the requirements of a Type AUK 1 air gap. Maximum operating pressure 12.0 bar, cold water use only.

Section:
2041 WC suites
Section Subtitle:
Low level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:
2004903
Expiry date:
30/04/2025
Size:
½” BSP Plastic Inlet, 1½” BSP Plastic Outlet, Flushing Volumes 6L full flush 4L reduced flush.
Marking:
Lefroy Brooks glazed on front on cistern and LB logo glazed on bowl of pan
Installation Requirements:
R001 R280 R559
Model:
LEFROY BROOKS LA CHAPELLE LOW LEVEL W.C. SUITE
Manufacturer:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Ibroc House Essex Road Hoddesdon
Postcode
EN11 0QS

View All Listings by this Company

Print This Approval


#2004904

BS EN 997 (2012) Lefroy Brooks La Chapelle High Level W.C. Suite (Ceramic) incorporating a Thomas Dudley Turbo 88R Mono flush Syphon with 1½’’ outlet valve (the flush volume is operated by a fulcrum lever) and a Thomas Dudley 401 (side entry) diaphragm type float operated Inlet valve which discharges via a type AG air gap. The WC Suite complies with the requirements of a Type AUK 1 air gap. Maximum operating pressure 12.0 bar, cold water use only.

Section:
2042 WC suites
Section Subtitle:
High level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:
2004904
Expiry date:
30/04/2025
Size:
½” BSP Plastic Inlet, 1½” BSP Plastic Outlet, Flushing Volumes 6L full flush
Marking:
Lefroy Brooks glazed on front on cistern and LB logo glazed on bowl of pan
Installation Requirements:
R001 R280 R559
Model:
LEFROY BROOKS LA CHAPELLE HIGH LEVEL W.C. SUITE
Manufacturer:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Ibroc House Essex Road Hoddesdon
Postcode
EN11 0QS

View All Listings by this Company

Print This Approval


#2004905

BS EN 997 (2012) Lefroy Brooks Classic Back to Wall W.C Pan (Ceramic) coupled with a Thomas Dudley “Mirage” dual flush 6/4 Litre concealed cistern (plastic) incorporating a “Turbo 88” dual flush 1½” Outlet Syphon (the flush volume is lever operated) and a “Hydroflo” servo assisted diaphragm type float operated inlet valve discharging via a Type AG air gap. The WC Suite complies with the requirements of a Type AUK 1 air gap. Maximum operating pressure 10.0 bar, cold water use only.

Section:
2041 WC suites
Section Subtitle:
Low level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:
2004905
Expiry date:
30/04/2025
Size:
½” BSP Plastic Inlet, 2” BSP Plastic Outlet, Flushing Volumes 6/4 Litres
Marking:
LB logo glazed on bowl of pan ‘DUDLEY’ logo badge on front of cistern
Installation Requirements:
R001 R280 R559
Model:
LEFROY BROOKS CLASSIC BACK TO WALL W.C PAN AND THOMAS DUDLEY MIRAGE DUAL FLUSH 6/4 LITRE CONCEALED CISTERN
Manufacturer:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Ibroc House Essex Road Hoddesdon
Postcode
EN11 0QS

View All Listings by this Company

Print This Approval


#2007010

Range of manually operated flow control valves with brass bodies and either ¼ turn or ½ turn ceramic disc headworks (see model). The products are available with trim sets and operating members in various finishes (see model). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
2007010
Expiry date:
31/07/2025
Size:
¾” BSP (F)
Marking:
Lefroy Brooks lion logo on underside of operating member
Installation Requirements:
R001 R040
Model:
XX 5000 YY When sold as a pair additional codes to be added: PWV102 - A pair where both valves are fitted with half turn clockwise closing ceramic cartridges (for handwheel & cross top operating members). PWV103 - A pair where one valve is fitted with a quarter turn clockwise closing ceramic cartridge and the other is fitted with a quarter turn counter clockwise closing ceramic cartridge (for single lever operating members). XX denotes the name of the trim and operating member type: The fist X is replaced by a letter to denote the trim set style/range name. The second X is replaced with either “H” for handwheel & cross top operating members with ½ turn ceramic disc headworks and “L” for single lever operating members with ¼ turn ceramic disc headworks. YY denotes the finish which can be replaced with: CP - Polished Chrome NK - Polished Nickel BC - Brushed Chrome BN - Brushed Nickel PB - Polished Brass BPB - Brushed Brass AG - Aged Brass TA - Taunton AG - Antique Gold HRG - Hard Rubbed Gold CM - Champagne Gold BCM - Brushed Champagne Gold CO - Copper MBC - Matt Black Chrome
Manufacturer:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Ibroc House Essex Road Hoddesdon
Postcode
EN11 0QS

View All Listings by this Company

Print This Approval


#2301028

A deck mounted, three-hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating quarter turn ceramic disc headworks with cross top operating members. The product is also supplied with stainless steel braided, EPDM lined flexible connecting hose assemblies, intended for use between side body valves and spout. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0660 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, swivel.
WRAS Approval Number:
2301028
Expiry date:
31/01/2028
Size:
¾” BSP (M) (side valves) connected to the ½” BSP (M) inlet on the spout via a stainless steel braided, EPDM lined flexible hose assembly with ½” BSP captive nuts
Marking:
CoalBrook logo rear of spout
Installation Requirements:
R001 R006 R010
Model:
XX 2006 YY Understanding the product code: Typical product code – XX2006YY First letters (e.g. XX) – These are replaced with letters representing the name of the trim. The number of letters will depend on the name of the trim. An example is BA which represents the name ‘Bank’. Middle numbers (e.g. 2006) – This is the numeric code allocated to the model and remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the name of the finish. Examples are: BN - Brushed Nickel CP - Chrome GM - Gunmetal SB - Stable Brass BB - Brushed Brass
Factor:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Ibroc House Essex Road Hoddesdon
Postcode
EN11 0QS

View All Listings by this Company

Print This Approval


#240102053

Range of single hole, single outlet over the rim (swivel nozzle) bidet combination tap assemblies with brass bodies (various finishes – see models), incorporating quarter (L & F models) or half turn (H models) ceramic disc headworks with a cross top or lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 Bar. Maximum operating temperature 60.0°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole, metal.
WRAS Approval Number:
240102053
Expiry date:
30/01/2029
Size:
M10 (F)
Marking:
Lefroy Brooks logo on under spout.
Installation Requirements:
R001 R006 R010
Model:
XX 1195/H YY, XX 1198/H YY, XX 1199/H YY, XX 1195/L YY, XX 1198/L YY, XX 1199/L YY, XX 1195/F YY, XX 1198/F YY, XX 1199/ F YY. ‘XX’ denotes the operating members applied to the side body valves that accompany the spouts. When dispatched this is replaced with one of the following: LB (Classic cross handle), LS (Classic star handle), BL (Classic Lever black ceramic), WL (Classic lever white ceramic), CH (Connaught cross handle), CL (Connaught lever), CR (Black Crystal lever), FR (La Chapelle cross handle), FM (La Chappelle lever metal), FB (La Chapelle lever black ceramic), FW (La Chapelle lever white ceramic) or MH (Mackintosh cross handle). ‘YY’ denotes the colour/plating options available CP – Polished Chrome, NK – Polished Nickel BC – Brushed Chrome, BN – Brushed Nickel PB – Polished Brass, BPB – Brushed Brass, AB – Aged Brass, TA – Taunton, AG – Antique Gold, HRG – Hard Rubbed Gold, CM – Champagne Gold, BCM – Brushed Champagne Gold, CO – Copper, MBC – Matt Black Chrome
Factor:
Lefroy Brooks Diffusion Ltd
Company Name
Lefroy Brooks Diffusion Ltd
Address
Unit 3 Marston Road Wolverhampton WV2 4LX

View All Listings by this Company
Manufacturer:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Ibroc House Essex Road Hoddesdon
Postcode
EN11 0QS

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.